Samsung DV45H6300GW/A3-00, DV45H6300GG/A3-00, DV45H6300EW/A3-00, DV45H6300EG/A3-00 Owner’s Manual

Gas and Electric

Usermanual

Imagine the possibilities

Dryer

^j_,/\6 ¢ F ¢

\ ,_._arnsung.corn,rejb_er

1-._,,31Z.I-SAi\,iSLING/T2L!,-:,:'64;

I Content

Safety instructions

What you need to know about safety instructions ..................................................... 4

Important safety symbols and precautions .............................................................. 4

Important safety instructions ......................................................................... 6

Installing your dryer

Unpacking your dryer ................................................................................ 8

What's included ...................................................................................... 8

Accessories ............................................................................................. 8

Important to installer ................................................................................. 9

Basic requirements ................................................................................... 9

Grounding ........................................................................................... 9

Gas models ............................................................................................. 9

Electric models .......................................................................................... 9

Location considerations ............................................................................. 10

Alcove or closet installations ......................................................................... 10

Ducting requirements ............................................................................... 12

Exhausting ............................................................................................ 13

Dryer exhaust tips ..................................................................................... 14

Gas requirements .................................................................................... 15

Commonwealth of massachusetts installation instructions ............................................ 15

Electrical requirements .............................................................................. 16

Electrical connections ................................................................................. 16

Connecting the inlet hose ........................................................................... 18

Replacement parts and accessories .................................................................. 19

Installation .......................................................................................... 19

Door reversal ........................................................................................ 20

Final installation checklist ............................................................................ 21

Operating instructions, tips ,,

Overview of the control panel ........................................................................ 22

Load the dryer properly ............................................................................... 26

Getting started ........................................................................................ 26

Rack dry .............................................................................................. 28

Child Lock............................................................................................. 29

Drum Light ........................................................................................... 29

English -2

Sound Off ............................................................................................. 29

My Cycle .............................................................................................. 30

Smart Care............................................................................................ 30

VentSensor ........................................................................................... 31

Care and cleaning

Control panel ......................................................................................... 32

Tumbler ............................................................................................... 32

Stainless steel tumbler ................................................................................ 32

Dryer exterior ......................................................................................... 32

Dryer exhaust system ................................................................................. 32

Clean the lint filter .................................................................................... 32

Special laundry tips .....,,,})

Special laundry tips .................................................................................. 33

Troubleshooting

Check these points if your dryer ...................................................................... 34

Information codes ................................................................................... 35

Appendix

Fabric care chart ..................................................................................... 36

Protecting the environment .......................................................................... 37

Declaration of conformity ............................................................................ 37

Specifications ....................................................................................... 37

Enalish -3

I Safety instructions

Congratulations on your new Samsung Dryer. This manual contains important information on the installation, use, and care of your appliance. Please take the time to read this manual to take full advantage of your dryer's many

benefits and features.

What you need to know about safety instructions

Please read this manual thoroughly to ensure that you know how to operate the extensive features and functions of your new appliance safely and efficiently. Retain the manual in a safe place near the appliance for future

reference. Use this appliance only for its intended purpose as described in this instruction manual. The Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may

occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, or operating

your dryer.

Always contact your manufacturer about problems or conditions you do not understand.

Important safety sgmbols and precautions

WARNING: Hazards or unsafe practices that may result in severe physical injury, death and/or

_ roperty damage.

Follow the information in this manual to minimize the risk of fire or explosion or to prevent property damage, personal injury, or death.

A CAUTION: Hazards or unsafe practices that may result in physical injury and/or property damage.

NOTE

These warning signs are here to prevent injury to you and others,

Please follow them explicitly. After reading this section, keep it in a safe place for future reference.

SAVETHESE INSTRUCTIONS

Enalish _4

WARNING =RiSKOF FiRE

= • Clothes dryer installation must be performed by a qualified installer. , • Install the clothes dryer according to the manufacturer's instructions and local codes.

• Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint.These

conditions will obstruct clothes dryer airflow and increase the risk of fire.

, . To reduce the risk of severe injury or death, BIIow all installation instructions.

TO REDUCE THE RISK OF FIRE OR EXPLOSION:

Do not dry items that have beer] previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances.They emit vapors that could ignite or explode. Any

material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these flammable liquids or solids and their fumes have been removed.

There are many highly flammable items used in homes, such as acetone, denatured alcohol, gasoline,

kerosene, some liquid household cleaners, some spot removers, turpentine, waxes, and wax removers. Do not dry items containing foam rubber (may be labeled latex Barn) or similarly textured rubber-like

materials on a heat setting. Heated foam rubber materials can, under certain circumstances, produce fire by spontaneous combustion.

,A WHATTO DOIF YOUSMELLGAS:

I_)onot try to light any appliance. Do not turn on the appliance. Do not touch any electrical switch. Do not use any phone in your building. Clear the room, building or area of all occupants. Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions. If you cannot reach your gas supplier, call the fire department. Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

SAVETHESE INSTRUCTIONS

English _5

Important safety instructions

,d_ WARNING

To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic

precautions, including the following:

1. Read all instructions before using this appliance.

2. Do not use the dryer to dry clothes which have traces of any flammable substance, such as vegetable oil, cooking oil, machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals, such as

mops and cleaning cloths. Flammable substances may cause the fabric to catch fire by itself.

3. Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance.

4. Do not allow children or pets to play on, in, or in front of the appliance. Close supervision is necessary when the appliance is used near children and pets.

5. Before the appliance is removed from service or discarded, remove the door to the drying compartment to prevent children or animals from becoming trapped inside.

6. Do not reach into the appliance when the drum is moving.

7. Do not install or store this appliance where it will be exposed to the weather.

8. Do not tamper with the internal controls.

9. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or published in the user-repair instructions that you understand and

have the skills to carry out.

10. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

11. Clean the lint screen before or after each load.

12. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

13. Keep the area around the exhaust opening and surrounding areas free from lint, dust, and dirt.

14. The interior of the dryer and exhaust duct should be cleaned periodically by qualified service personnel.

15. Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

16. This appliance must be grounded. See"Electrical requirements"and "Grounding'in the"lnstalling your dryer" section.

17. This appliance must be properly grounded. Never plug the power cord into a receptacle that is not grounded adequately and in accordance with local and national codes. Refer to installation instructions for grounding

this appliance.

18. Ensure pockets are free from small irregularly shaped hard objects and foreign material, i.e. coins, knives, pins, etc.These objects could damage your dryer.

19. Gas leaks may occur in your system, resulting in a dangerous situation.

20. Gas leaks may not be detected by smell alone.

21. Gas suppliers recommend you purchase and install a Ubapproved gas detector.

SAVETHESE INSTRUCTIONS

English _6

_, WARNING

GasAppliances;

WARNING:This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

Gasappliances can cause Iowqevel exposure to Proposition 65 listed substances, including but not limited to, benzene, carbon monoxide, formaldehyde and soot, substances resulting from the incomplete combustion of

natural gas or LPfuels.

iB, CAUTION

1. Do not sit on top of the dryer.

2. Because of continuing product improvements, Samsung reserves the right to change specifications without notice. For complete details, see the Installation Instructions packed with your product before selecting

cabinetry, making cutouts, or beginning installation.

3. Do not wash clothing with large buckles, buttons, or other heavy metal or solid things.

4. Install and use in accordance with the manufacturer's instructions.

5. All washed and unwashed fabrics that contain vegetable oil or cooking oil can be dangerous. Washing these items in hot water with extra detergent will reduce, but not eliminate, the hazard. Always use the Cool Down cycle for these items to reduce their temperature. Never remove these items from the dryer hot or interrupt

the drying cycle until the items have run through the Cool Down cycle. Never pile or stack these items when they are hot.

6. Take care that children's fingers are not caught in the door when closing it. This may result in injury.

SAVETHESEINSTRUCTIONS

I ZnstaJJingyour dpyer

Unpackingyour dnyep

Unpack your Dryer and inspect it for shipping damage. Make sure you have received all the items shown below, if

your Dryer was damaged during shipping, or you do not have all the items, contact 1-800-SAMSUNG (726-7864).

,_ WARNING

What's included

8} @

The packing materials can be dangerous to children. Keep all packaging material (plastic bags,

polystyrene, etc.) well out of the reach of children.

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

1 j To_stvs_ j-S-j _!!!_ ,

Son!!o!_sns! s W'S!s!!n!s! j

Accessories

"Y"-con nector

English-8

Important to installer

Please read the following instructions carefully before installing the dryer.These instructions should be kept for

future reference.

,_. WARNING: Remove the door from all discarded appliances to avoid the danger of a child being trapped

and suffocating.

Basic requirements

Make sure you have everything necessary for the proper installation

A GROUNDED ELECTRICALOUTLET is required. A POWER CORD electric dryer (except for Canada). GAS LINES (ifa gas dryer) must meet national and local codes.

The EXHAUST SYSTEM must be made of rigid metal or flexible stiff-walled metal exhaust ducting.

Grounding

This dryer must be grounded. In the event of a malfunction or breakdown, grounding the product will reduce the

risk of electrical shock by providing a path of least resistance for the electrical current.

Gas models

Your dryer hasa cord with an equipment-grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances. Do not modify the plug provided with your dryer if it doesn't fit the outlet, have a proper outlet installed by

a qualified electrician. Never connect the ground wire to the plastic plumbing lines, gas lines, or hot water pipes.

Electricmodels

Your dryer hasan optional cord with an equipment-grounding conductor and a grounding plug, which is sold separately.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances. Do not modify the plug provided with your dryer if it doesn't fit the outlet, have a proper outlet installed by

a qualified electrician. If a power cord is not used and the electric dryer is to be permanently wired, the dryer must be connected to

a permanently grounded metal wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dryer.

Enq[ish _9

Location considerations

The dryer should be located where there isenough space at the front for loading the dryer, and enough space

behind for the exhaust system.This dryer is factory-ready for the rear exhaust option.To exhaust out the bottom, right or the left, use the accessory exhaust kit. Instructions are included with the kit. Make sure the room in which

the dryer is located hasenough fresh air.The dryer must be located where there are no air-flow obstructions. For gas dryers, adequate clearance must be maintained as noted on the data plate to ensure adequate air for

combustion and the proper dryer operation.

The dryer must not be installed or stored in an area where it will be exposed to water and/or weather.The dryer

area must be kept clear of combustible materials, gasoline, and other flammable vapors and liquids. A dryer produces combustible lint.The area around the dryer should be kept lint-free.

Alcove or closet installations

WARNING

The dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or

closet. No other fuePburning appliance should be installed in the same closet as the dryer.

Minimum clearances between the dryer and adjacent walls or other surfaces:

js_a--es n!_mm! i%ar _ n!!_Omm! i

Top !_!n!_ ra!! iaoie;iront1_!n!.s?ra!! j

A in. (25 mm)

q )}(( )}

R 27 in. (686 ram) C 17 in. (432 mm)

D 2 in. (50 mm)

F 32.4 in. (823 ram) F 5 in.(127 mm)

o il. o Vi' E _

Recessedarea

Sideview

(closetor confined area)

English _10

Installation with pedesta!

A 38.7in.(984mm) B .53.3in. (1S55 mm) C 27 in. (686 ram)

53 in. (1345 mm) to

clear open door

t J E 32.4in.(823 ram)

F 5 in.(127 mm)

i' '1

Znsta[lation wRh stacked washingmachine and dpgep

i_ A 3 in.(76 mm)

B 48 in.2(3100 m m2)

_:__::rrrrrrr

The front of the closet must have two unobstructed air openings (B, C) for a combined minimum total2 2

area of 72 in (465 cm )with a minimum clearance of 3 in. (7.6 cm) at the top (A) and bottom (D). External exhaust elbow requires additional space (L).

Stacking (MODEL NO: SK-SA) Samsung's Washer and Dryer can be stacked to maximize usable space.

The dryer legs need to be removed to stack the Washer and Dryer. You can purchase an optional stacking

kit from your Samsung retailer.

C 24 in.2(15.50 mm 2)

D 3 in. (76 ram)

E 6 in.(152 mm) _ F 773 in. (1968 mm)

G 1 in. (25 ram) H 27 in. (686 ram)

[

I 5 in.@27 mm)

J , 1 in.(25 mm)

K 32.4 in. (823

L , 8in.(203 mm)

ram)

English _11

Ducdng pequbements

i i Rigid Metallic Flexible _ Rigid Metallic Flexible _

i 0 24.4 m (80 ft.) 12.4 m (41 ft.) 22.6 m (74 ft.) 10.1 m (33 ft.)

i t 20.7 m (68 ft.) 11.2 m (37 ft.) 18.9 m (62 ft.) 8.8 m (29 ft.)

i 2 17.4 m (57 ft.) 10.1 m (33 ft.) 15.5 m (51 ft.) 7.6 m (25 ft.)

3 14.3 m (47 ft.) ' 9.0 m (29 ft.) ' 12.5 m (41 ft.) 6..5m (2 ] ft.)

Do not use

_ non-metallic flexible ducts.

Use a 4 inch (10.2 cm) diameter rigid aluminum or rigid galvanized steel duct. Do not use a smaller duct.

Ducts larger than 4 inches (10.2 cm) in diameter can result in increased accumulation of lint. Lint should be removed regularly. If a flexible metal duct must be used, use the type with a stiff sheet metal wall. Do not use a flexible duct with

a thin foil wall. A serious blockage can result if the flexible metal duct is bent too sharply. Never install any type of flexible duct in walls, ceilings, or other concealed spaces. Keep the exhaust duct asstraight and short as possible. Secure joints with duct tape. Do not use screws. Plastic flexible ducts can kink, sag, be punctured, reduce airflow, extend drying times, and affect the dryer

operation. Exhaust systems longer than recommended can extend drying times, affect machine operations, and collect

lint.

The exhaust duct should end with an exhaust hood with a swing-out damper to prevent back drafts and

entry of wildlife. Never use an exhaust hood with a magnetic damper.

The hood should have at least 12 inches (30.5 cm) of clearance between the bottom of the hood and the

ground or other obstruction.The hood opening should point down. Never install a screen over the exhaust outlet.

To avoid lint buildup, do not exhaust the dryer directly into a window well. Do not exhaust under a house or

porch. If the exhaust duct must run through an unheated area,the duct should be insulated and slope slightly down

towards the exhaust hood to reduce condensation and lint buildup. Inspect and clean the interior of the exhaust system at least once a year. Unplug the power cord before

cleaning. Check frequently to make sure the exhaust hood damper opens and closes freely. Check once per month, and clean at least once per year. Note: If your clothes are not getting dry, then check

the duct for obstructions. Do not exhaust the dryer into a wall, ceiling, crawl space, or concealed space of a building, gas vent, or any

other common duct or chimney.This could create a fire hazard from the lint expelled by the dryer.

Recommended Use only for short-run installation

English - 12

If the new dryer is installed into an existing exhaust system you must make sure:

The exhaust system meets all local, state, and national codes. That a flexible plastic duct is not used. To inspect and clean all lint buildup from inside the existing duct.

The duct is not dented or crushed. The exhaust hood damper opens and closes freely.

The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0. This can be measured with the dryer running with a manometer at the point where the exhaust duct

connects to the dryer. A no-heat setting should be used.The dryer tumbler should be empty and the lint filter clean.

Exhausting

The dryer shall not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space of a

building. Exhausting the dryer to the outside will prevent large amounts of lint and moisture from being blown into the

room.

• All dryers must be exhausted to the outside. Do not assemble the duct with screws or other fastening means that extend into the duct and catch

lint.

The exhaust duct should be 4 inches (102 mm) in diameter. The total length of flexible metal duct shall not exceed 2.4 m (7.8 ft.).

In the United States:

Use only those foiPtype flexible ducts, if any, specifically identified for use with the appliance by the manufacturer and that comply with the OutEine for Clothes DryerTransition Ducts, Subject 21S8A.

In Canada:

Use only those foiPtype flexible ducts, if any, specifically identified for use with the appliance by the manufacturer.

Outside the U.S and Canada:

Refer to the local codes.

WARNING

The dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or

closet. NEVERUSEA PLASTIC OR NON-METAL FLEXIBLE DUCT.

If your existing ductwork is plastic, non-metal, or combustible, replace it with metal. Use only a metal exhaust duct that is non-flammable to ensure containment of the exhaust air, heat,

and lint.

English - 13

Dryer exhaust tips

WARNING: A plastic or non-metal flexible duct presents a potential fire hazard.

Make sure your dryer is installed properly so it exhausts air easily. Use a 4"diameter rigid metal duct.Tape alljoints, including at the dryer.

Never use lint-trapping screws. Keep ducts asstraight as possible.

Clean all old ducts before installing your new dryer. Be sure the vent flap opens and closes freely.

inspect and clean the exhaust system annually.

Don't let a poor exhaust sustain slow the drying process bg:

Restricting your dryer with a poor exhaust system. "-...................................................................................................................................................

Using a plastic, thin foil, or non-metal flexible duct.

Unnecessarily using long ducts that have many elbows.

Allowing dented or clogged ducts and vent.

English _14

Gas pequipements

THE INSTALLATION MUST CONFORM WITH LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL FUEL GAS CODE ANSIIZ223.1, LATEST REVISION (FOR THE UNITED STATES), OR WITH THE

CANICGA-B149 INSTALLATION CODES (FOR CANADA).

Use only natural or LP(liquid propane) gases.

This dryer designed for use with natural gas. If you plan to use your dryer with LP gas (liquid propane), the

conversion must be done by a qualified service technician in order to achieve safe and proper performance. A 1/2 inch (1.27 cm) gas supply line is recommended and must be reduced to connect to the 3/8 inch (l cm)

gas line on your dryer:The National Fuel Gas Code requires that an accessible, approved manual gas shut-off valve be installed within 6 inches of your dryer. Gas dryers installed in residential garages must be raised 18 inches (46 cm) above the floor.

Additionally, a 1/8 inch (0.3 cm) N.RT. (National PipeThread) plugged tapping, accessible for test gauge connection, must be installed immediately upstream of your dryer's gas supply connection.

Your dryer must be disconnected from the gas supply pipe system during any pressure testing of the system. DO NOT reuse old flexible metal gas lines. Flexible gas lines must be design certified by the American Gas

Association (CGA in Canada).

• Any pipe joint compound used must be resistant to the action of any liquefied petroleum gas.

As a courtesy, most local gas utilities will inspect a gas appliance installation.

GAS IGNITION -Your dryer uses an automatic ignition system to ignite the burner. There is no constant burning pilot.

Commonwealth of massachusetts installation instructions

Your dryer must be installed by a licensed plumber or gas fitter. A'T" handle manual gas valve must be installed in the gas supply line to your dryer. If a flexible gas connector is used to install your dryer, the connector may not be

longer than 3 feet (36 inches).

WARNING

Gas leaks may occur in your system, creating a dangerous situation. Gas leaks may not be detected by smell alone. Gas suppliers recommend that you purchase and install aUL-approved gas detector.

Install and use it in accordance with the manufacturer's instructions.

English - 15

Electpical pequipements

The wiring diagram is located onthe plate below the control panel. ,_ WARNING

Beforeoperating or testing, follow all grounding instructions in the"Grounding"section on page 13. Anindividual branch (or separate)circuit serving onlyyour dryerisrecommended. DO NOTUSEANEXTENSION

CORD.

A120volt, 60HzA( approved electricalservice,with a 1S-amperefuseorcircuit breakeris required.

Most U.S.dryers requirea 120/240volt,60 HzACapproved electrical service.Some require120/208volt,60 Hz approved electricalservice.Theelectric servicerequirementscan be found on the data label locatedbehind the door.A30-amperefuse or circuit breakeron both sidesof the lineis required.

Ifapower cord isused,the cord should be plugged into a30-ampere receptacle.

The power cord is NOTprovided with U.S.electric model dryers. _k WARNING- RISKOFELECTRICSHOCK

The improper connection of the equipment grounding conductor canresult in a risk ofelectric

shock.Checkwith aqualified electrician or servicemanifyou areindoubt asto whether your dryer is properly grounded.Do not modify the plug providedwith your dryer- if it doesn't fit the outlet, have

aproper outlet installed by aqualified electrician.

To prevent unnecessaryriskof fire, electrical shock,or personalinjury, allwiring and grounding must

bedone in accordancewith local codes,or in the absenceof localcodes,with the National Electrical

Code,ANSI/NFPANo.70-LatestRevision(for the U.S.)or the CanadianElectricalCode CSAC22.1-

LatestRevisionsand localcodes and ordinances.It isyour responsibilityto provideadequate electrical servicesfor your dryer.

All gasinstallations must bedone in accordancewith the national FuelCodeANSVZ2231- Latest

Revision(forthe U.S.)orCAN/CGA- B149InstallationCodes- LatestRevision(for Canada)and local codesand ordinances.

ElectPical connections

6as models = U.S.and Canada

Electpic models - U.S.0n!y

When local codes allow,the dectrical supply of the dryer may beconnected by meansof a new power

supplycord kit,marked for usewith adryer,that isU.Llisted and rated at aminimum of120/240volts, 30-amperewith three No. 10 copper wire conductors terminated with closedloop terminals, open-end

spadelugswith turned up ends,or with tinned leads.

Do not reusea power supply cordfrom an old dryer.Thepower cord electric supplywiring must be retained atthe dryercabinet with a suitable Ublisted strainrelief.

Grounding through the neutral conductor is prohibited for (1)new branch-circuit installations,(2)

mobile homes, (3)recreationalvehicles,and (4)areaswhere local codes prohibit grounding through

the neutral conductor. (Usea 4-prong plug for 4wire receptacles,NEMAtype 14-gOR.)

EJectpicmodels = Canada0n!y

A 120/240volt, 60Hz ACapproved electricalservicefused through a30-amperefuseor circuit breakeron both sidesof the line is required.

AllCanadianmodels areshippedwith the power cord attached.The power cord should be plugged into a 30-amperereceptacle.

InCanada,youmay not converta dryer to 208

volts.

English _16

3-WZREsystem connections

1, Loosen or remove the center terminal block screw.

2. Connect the neutral wire (white or center wire) of the power cord to the center, silver-colored terminal screw of the terminal block.Tighten the screw.

3. Connect the other wires to the outer terminal block screws. Tighten the screws.

4. Tighten the strain reEiefscrews.

5. Insert the tab of the terminaE block cover into your dryer's rear paneEslot.

6. Secure the cover with a holddown screw.

If converting from a4-wire electrical system to a g-wire, the ground strap must be reconnected to the

terminal block support to ground the dryer frame to the neutral conductor.

4-WZREsgstem connections

Remove the center terminal block screw.

Connect the ground wire (green or unwrapped) of the power cord to the external ground conductor screw.

Connect the neutral wire (white or center wire) of the power cord and the appliance ground wire (green with yellow stripes) under the central screw of the terminal block.

Connect the other wires to the outer terminal block screws. Tighten the screws.

Tighten the strain relief screws.

Insert the tab of the terminal block cover into your dryer's rear panel slot.

Secure the cover with a holddown screw.

i_ Externa ground connector i A ,--- _j_ .............

i B Greenorbarecopperwireofthepowercord l t_ ,h%i,Y %

_' B I

J_ 314 in. (1.9 cm) UL-listed strain relief j i --E

J f

j_i Grounding wire(green/yellow) J ii _ I J_ Neutral wire (white or center wire)

8. With a level, check your dryer and make the necessary adjustments to the leveling legs.

9. At this time, make sure all gas connections (on gas models), exhaust and electrical connections are complete. Plug in your dryer, and check its operation by using the checklist below.

10. (GAS MODELS ONLY)

The burner may not ignite initially due to air in the gas line. AHowing your dryer to operate on a heat setting

will purge the line. If the gas does not ignite within 5 minutes, turn your dryer off and wait 5minutes. Be sure the gas supply to your dryer has been turned on. In order to confirm the gas ignition, check the exhaust for

heat.

English - 17

Connecting the inlet hose

The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses.

1. Turn the cold water faucet off.

2. Attach the brassfemale end of the Y connector (A) to the cold water faucet.

3. Attach the straight end of long hose (B) to the Y connector.

4. Using pliers, tighten the coupling with an additional two-thirds turn.

If the Y connector cannot be attached directly to the cold water

faucet, the short hose must be used.

(If space permits, please skip steps 5 to 8, and go directly to step 9.)

Attach the short inlet hose (C} to the cold water faucet. Screw on the coupling by hand until it is seated on the faucet. ___

Using the pliers, tighten the coupling with an additional two-thirds

turf].

Attach the Y connector CA)to the brass male end of the small hose. " Screw on the coupling by hand until it is seated on the connector.

Using the pliers, tighten the coupling with an additional two4hirds

turf].

Attach the angled end of long hoses to the fill valve at the bottom of the dryer rear frame. Screw on the coupling by hand until it is seated

on the fill valve connector.

10. Using pliers, tighten the coupling with an additional two-thirds turn.

/ / /

11. Attach the washer hose (D) to the other side of the Y connector CA). Screw on the hose coupling until it istight. Using pliers, tighten the coupling with an additional two thirds turn.

12. Check that the water faucets are on.

13. Check for leaks around the Y connector, faucets and hoses.

When you tighten the coupling with pliers, do not overtighten.This may damage the coupling.

£ndish _ 18

Replacement parts and accessories

If your dryer requires replacement parts or accessories, contact the dealer where you purchased your dryer or the SAMSUNG customer care center at 1-800-SAMSUNG (726-7864).

Installation

For the proper installation, we recommend that you hire a qualified installer.

1. Move your dryer to an appropriate location for the installation. Consider installing the dryer and washer side-by-side, to allow access

to the gas, electrical, and exhaust connections. Place two of the carton cushion-tops on the floor.Tip your dryer on its side so it lies across both cushion-tops.

2, Set your dryer back in an upright position. 3, To ensure that the dryer provides the optimal drying performance, it

must be level. To minimize vibrations, noise, and unwanted movement, the floor must be a perfectly level, solid surface.

To set the dryer to the same height asthe washer, fully retract the

leveling feet CA)by turning them counterclockwise, then loosen the legs by turning them clockwise.

Adjust the leveling feet only as much asnecessary to level the dryer. Extending the leveling feet more than necessary can

cause the dryer to vibrate.

Review the"Exhausting'section on page 13 before installing the exhaust system. Install the ductwork from your dryer to the exhaust hood.The crimped end of the duct sections must point

away from your dryer.

DQ NOT use sheet metal screws when assembling the ducting.Thesejoints should be taped. Never use plastic flexible exhaust material.

Tip for tight installations: install a section of the exhaust system onto your dryer before putting it in place.

Use duct tape to secure this section to your dryer, but do not cover the ventilation slots at the back of the unit in dryer cabinet.

Review the"Electrical requirements" section on page 16. BEFOREOPERATINGORTESTING, follow the grounding instructions in the"Grounding"section on page 9.

_IL WARNING- U.S. MODELS

RISK OF ELECTRIC SHOCK - All U.S.models are produced for a S-WIRE SYSTEM CONNECTION.

The dryer frame is grounded to the neutral conductor at the terminal block.

A4-WIRE SYSTEM CONNECTION is required for new or remodeled construction, mobile homes, or if local codes do not permit grounding through the neutral conductor, if the 4-wire system is used, the

dryer frame cannot be grounded to the neutral conductor at the terminal block. Refer to the following instructions lot"Electrical connections" on page 16.

Remove the terminal block cover plate. Insert the power cord with a Ublisted strain relief through the hole provided in the cabinet near the terminal

block.

relief be used.

A strain must

Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a 3/8 in. (1 cm) deep well socket.

English- 19

Review the"Gas requirements" section on page 1S. Remove the pipe thread protective cap. Apply a pipejoint compound or about 1V2wraps of Teflon tape over

all threaded connections.

The pipe joint compound must be resistant to the actions of any liquefied petroleum gas.

Connect the gas supply to your dryer. An additional fitting is required to connect the 3/4" (1.9 cm) female thread end of a flexible connector to the 3/8" (1 cm) male threaded end on the dryer.

Securely tighten the gas line fitting over the threads.

Turn on the gas supply.

Check all gas connections for leaks using a soap solution. If bubbles appear, tighten the connections and recheck. DO NOT use an open flame to check for gas leaks.

Doop peversaJ

1. Unplug the power cord.

2. Remove two door hinge screws.

3. Lift the door and remove it.

4. Remove two screws from the frame front.

5. Remove the two screws from the opposite side of the door hinge.

6. Remove the two screws from the holder lever.

7. Reassemble the two screws on the inside holes.

English _20

8, Remove a screw from the door hinge.

The screw is for pre-flxing the door to the frame front.

9, Reassemble the screw in the other hole.

10. Place the door on the other side and reattach it to the dryer.

11. Reattach the holder lever.

12. Reattach the screws in the remaining holes.

Final installation checklist

The dryer is plugged into an electrical outlet and is properly grounded. The exhaust ductwork is hooked up and the joints are taped.

A plastic flexible duct is NOT used. Use rigid or stiff-walled flexible metal vent material.

The dryer is level and is sitting firmly on the floor.

Gas models the gas is turned on with no gas leaks. Start your dryer to confirm that it runs, heats, and shuts off.

English- 21

@ Operating instructions, tips

To reduce the risk of fire, electric shock, or injury to persons,read the IMPORTANT SAFETYINSTRUCTIONS

before operating this appliance.

Overview of the control panel

Electricmodel

HEAVY DUTY NORMAL ECO NORMAL

SANITIZE ............................ TIME DRY

BEDDING %QUICK DRY

WOOL REFRESH

PERM PRESS__,RIN' AI R FLUFF

DELIEATES ', , WRINKLE AWAY

[] Sensor Dry _ Steem cydes m

Gasmodel

Manual Dry [] *{Ho_ ss_c)

HFAVY DUTY NORMAL EEO NORMAL

BEDDING QUICK DRY

® @@@

PERM AIR FLUFF

DELIC KLE AWAY

[] Sensor Dry Steam Cydes []

Cycle selector To select a cycle, rotate the Cycle selector dial to the desired cycle. The indicator light by the cycle name will illuminate.The ECONORMAL, NORMAL, HEAVY DUTY, BEDDING,

SANITIZE, PERM PRESS,WOOL and DELICATEScycles are Sensor Dry cycles.

Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness

level (Very Dry to Damp Dry) is reached.

English _22

i underwear and linen. i Cottons, Work clothes,

i NORMAL Linen, Mixed loads (If this cycle is selected, the Eco Dry function is enabled

uAvVi DUTY---- Heavy fabrics such asjean, Use this cyde to get high heat for heavy fabrics such as

The NORMAL cycle is for most fabrics including cotton,

by default. For more information, please refer to the descriptions about the'Eco Dry"option on next page.)

.Eo.. Corduroys,Heavywork eans,corduroys,orworkclothes

clothes .

Bulky items such

i BEDDING as blankets, Sheets, comforters. i Comforters, Pillows

Bedding, Curtains, Children's deep into the fabric during the drying cycle. Use clothing this course to keep your bedding and curtains clean

J Shirts, Synt hetic fabrics, '

PERM PRESS Knits, Wrinkle-free cottons, , Dry wrinkle-free cottons, synthetic fabrics, knits, and

i Permanent permanent press fabrics automatically.

For machine washable and '

jWooL tumbbdryablewodonly Formachinewashableandtumbledryablewoolonly.

j Maximum amount : 31b) _ i DELICATES Underwear, Blouses, The DELICATEScycle is designed to dry heat-sensitive

Lingerie items at a low drying temperature.

j QUICK DRY Small loads Provides a 30 minutes drying cycle.

JTIME DRY Any load (If this cycle is selected, the Eco Dry function is enabled i by default. For more information, please refer to the

j descriptions about the"Eco Dry"option on next page.)

i AIR FLUFF Foam, Rubber, Plastic The AIR FLUFFcycle tumbles the load in room j , temperature air. ,

i reducing odors from loads consisting of one to four dry 'REFRESH Shirts, Trouser, Comforter,

i Pillows items. In this cycle a small amount of water is sprayed i into the dryer drum after several minutes of tumbling

j with heat.

For bulky items such as blankets, sheets, and

Sanitize garments by infusing high temperature heat

through sanitization.

i TheTIME DRY cycle allows you to sdect a cycle time ' in minutes.

This cycle is best for smoothing out wrinkles and

] TheWR HKLEAWAYcyderemoveswr nHesfrom

i via optimized steam care. j WRINKLE AWAY Shirts, Trouser, Blouses

i You can change the drying time.

clothes stored in closets, etc. It provides wrinkle release

<Minimumtime:20minutes

_For best results, load no more than 3 items.

English- 23

Cycle options

TOcyde.reducestat,csbydoth,ngfr,ct,onandspraysteamatthe aterper,odofdry,ng

i Anti Static It is only available with: NORMAL, HEAVY DUTY, PERM PRESS,DELICATES(Dry level of

j in order to reduce statics, the drum can be paused during operation.

Rack Rack Dry is available in theTIME DRY cycle.Temperature will be set to Extra Low only.

Dry

J The mixed load bell that notifies you when the average dry level in a load is damp

Mixed Load Bell dry quickly out of the dryer early while letting others continue to dry.

i level selections are limited to Normal Dry, More Dry, and Very Dry.

j unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle Prevent

JWrinkle Prevent button to activate this feature.

j The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.

My Cycle "My Cycle" section on page 30.)

Adjust Time cycles (TIME DRY,QUICK DRY,or AIR FLUFF cycles) and WRINKLEAWAY cycle.

i To add or subtract time from the cycle, press the Adjust Time arrow pad up or down

j Tocontro,operat,onratefordryingasmall,cadsatSensorDrycourse

Jsmall Load care TM It is only available with: NORMAL, HEAVY DUTY, PERM PRESSand DELICATEScourse.

,,_i_':_m0delOniy)_tcan'tbeselectedJcance%dwhenthedryingcourse_srunning

, in order to improve drying effect and control operation rate, the drum can be paused

i This function is available in the NORMAL, and TIME DRY cycles. When the Eco Dry

i function is activated, drying takes longer but the power consumption is reduced.

i EcoDry

i (Electric model (When the Eco Dry function is enabled, the drying time can be extended up to 3

i Only) times depending on the specified temperature and the amount of laundry to be

Dry Level To select the dry level in the NORMAL, HEAVY DUTY, or other Sensor Dry cycles, press the Dry Level button. An

indicator light will illuminate next to the desired dryness level.

Press the button repeatedly to scroll through the settings. Larger or bulkier loads may require theVery Dry or

More Dry setting for complete dryness. The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the

end of the cycle. Damp Dry is designed to partially dry items. Use for items that lay fiat or hang to dry.

every course exceeds Normal) and TIME DRY course.

(Refer to the "Rack dry"section on page 28.)

dr}, (80 % dried).This lets you take garments that you don't want fully dried or that

Youcanselectth_sfunction_naUSensorDrycyclesexceptWOOL,SANmZE.Thedry

Wrinkle Prevent provides approximateEy 180 minutes of intermittent tumbling in

The indicator light above the pad will illuminate when Wrinkle Prevent is selected.

Choose your favorite cycle including cycle, temp, dry level option, etc. (Refer to the

Time can be added or subtracted from the automatically set times in the Manual Dry

until the desired time is displayed.

during operation.

dried. When the product is shipped, the Eco Dry function is set to On by default.)

English- 24

Temp,

To select the correct temperature for the load, press theTemp, button. An indicator light will illuminate next

to the desired temperature. Pressthe button repeatedly to scroll through the settings.

High For sturdy cottons or those labeled Tumble Dry.

j Medium For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry

Medium.

i Med Low For lower heat than Medium to dry synthetic or washable knit fabrics.

Low For heat sensitive items labeled Tumble Dry Low orTumble Dry Warm.

Extra LoW Provides the lowest heated dry temperature possible.

Time When using Manual Dry cycles, you can adjust the drying time by pressing theTime selection button.

During the Sensor Dry cycle, the time light indicator is off because exact drying times are determined by fluctuating humidity levels.

LED Display

The display window shows the estimated time remaining in the cycle after the Start/Pause button is pressed. The estimated time remaining may fluctuate as the cycle progresses.

The Drying light will illuminate and remain lit until the cycle is complete.

When your dryer isin the cooPdown phase, the Cooling light will illuminate. When your dryer isin the wrinkle prevent phase, the Wrinkle Prevent light will illuminate. When the cycle is complete,"End'will appear in the display panel until the dryer door is opened or the Power

button is pushed. If your dryer is paused during a cycle, the indicator lights will blink until the Start/Pause button is pressed. Power

Press once to turn your dryer on. Press again to turn it off. if your dryer is left on for more than 10 minutes without any buttons being touched, the power automatically turns off.

Start/Pause Press to pause and restart programs.

Indicators

_/ Filter Check Sound Off

..... J r-,. IVentSensor(TheVentSensorisonlyonthe J

English- 25

Load the drLjer properlLJ

Place only one washload in your dryer at a time.

Mixed loads of heavy and lightweight fabrics will dry differently, which may result in lightweight fabrics being

dry while heavy fabrics remain damp at the end of a drying cycle.

Add one or more similar items to your dryer when only one or two articles of clothing need drying. This improves the tumbling action and drying efficiency.

Overloading restricts tumbling action, resulting in uneven drying aswell as excessive wrinkling of some

fabrics.

If you insert laundry into your dryer while it is extremely tangled immediately after your washer has

finished a wash or spin cycle, it may degrade the drying efficiency or cause the door to open. We

recommend that you untangle your laundry appropriately before inserting it.

Getting started

1. Load your dryer loosely (DO NOT overload).

2. CIosethe door.

3. Select the appropriate cycle and options for the load. (For detail, refer to the "Cycle overview" on next page.)

4, Press the Start/Pause button.

5. The dryer indicator light will illuminate.

6. The estimated cycle time will appear in the display. The time may fluctuate as humidity levels fluctuate in the dryer.

• When the cycle is complete,"End" will appear in the display. Pressing Power cancels the cycle and stops your dryer.

The Drying, Cooling, and Wrinkle Prevent indicator lights will illuminate during those portions of the

cycle.

,_ Do not place anything on top of your dryer while it is running.

English- 26

Cycle overview

Predefined

i ......

J HEAVY DUTY Large Normal Dry o High J BEDDING Large Normal Dry o High

JSensor Dry I , I j SANITIZE j Large Very Dry - [ High [ - j

i PERMPRESS Medium Normal Dry o Medium i WOO[ : + low J

, Small Normal Dry j f f , , i

j DELICATES Medium Normal Dry o Extra Low j l Q.UK-KDRY _ : _ : ' High i

j t i

j Manual Dry TIME DRY j Large High o l AiRFLUFF [ Small

, J - _ _ , - ,

j Steam Cycles i j WRINKLEAWAY , Small , , , High , ,

Load size recommendations For best results, follow the load size recommendations for each drying cycle

ECONORMAL Medium Normal Dry o Extra Low NORMAL Large Normal Dry o High o

Small , i i

REFRESH J Srn]ii [ _ ] High ]

--L_rge_ E!!!!hed!_m!o_t_!_,*[2!!:_tnotd_!!em_°"e!!h!_!eve!t_!heYneed!ot2mt!e_!ee!_:j

Medium F!!!!he d[um !o abou! V2!u!!: j Small J F!!!!he d!um w!!h 3_5 !iCtus[ no! mo!e !han _,_fu!!: i

Options

ECONORMAL o o

iJ _HEAVY DUTY , o o o o

--"--t ---<;_r,,_n' nr,, BEDDING _ o _ - _ - o

NORMAL o o o o o

SANITIZE o

l woos l : _ ' ' : _ : ' o '

l DELICATES o o o o

i Manual Dry TIME DRY o o o o

AIRFLUFF o o

i _EF_ESH ÷ : ÷ : ÷ : ' : _ : ' o '

j Steam Cycles j WRINKLEAWAY - o o

English _27

Rack dry

Installingthedryingneck

1. Open the dryer door.

2. Position the drying rack in the tumbler, placing the front lip of the drying rack (A) on the top of the lint filter.

3. Place the rear legs in the two recessed areas of the dryer's back wall, and then push down the middle of the drying rack to fix in place.

4. Place the items to be dried on the rack, leaving space between them so air can circulate.

S. CIosethe dryer door.

6. Press the Rack Dry button in the TIME DRY cycle and then select the time according to the amount of moisture and the weight of the items.

The drying rack can be also used at AIR FLUFFcycle.

vasnaDle sweazers

OIOCK_OsnaDe and at flat on rack Stuffed tovs lcotton or Do ,,ester fiberfilled

Stuffed tow

roam or rubber-filled

Foam ruDDer gillow_ Sneakers AIR FLUFF

Drying foam rubber, plastic, orrubber on a heat setting may cause damage to the items and lead to a fire

hazard.

Extra Low (TIME DRY cycle)

AIR FLUFF

English _28

Child Lock

Prevents children from pBying with your dryer.

Setting/ReJeasing

To turn Child Lock on or off, press both the Temp. and Time buttons simultaneously for 3 seconds.

Chin Lock Details

1, You can turn Child Lock on while your dryer is running. 2, Once you set the Child Lock function, no button, except for the Power button, will respond until you turn off

the Child Lock function.

3, The"Child Lock(_"indicatorwill belit.

• if the dryer is powered on again, the Child Lock function stays on. To turn off Child Lock, follow the instructions above.

When other buttons, except for the Power button, do not respond, check the Child Lock indicator, if Child

Lock is on, follow the instructions above to turn Child Lock off.

Drum Light

Lights the dryer drum while the dryer isrunning.

TupningOnand Off

To turn on or turn off the Drum Light, press and hole the WrinMe Prevent button for 3 seconds.

You can turn the Drum Light on and off whib your dryer is running and when it is stopped. If you do not turn the Drum Light off S minutes after turning it on, the Drum Light is automatically turned

off.

SoundOff

Use this function to mute the button and operating sounds.

Setting and Releasing

To turn the Sound Off function on or off, press the Dry level button for 3 seconds.

Sound Off Details:

1, You can set Sound Off while your dryer is running. 2, Once you have activated Sound Off, the button and operating sounds are muted until you deactivate it.

3. The"Sound Off_g')"indicator will be lit.

If you do not turn the Sound Off function off before you turn your dryer off, it will still be on when you turn

your dryer on again. To turn Sound Off off, follow the instructions above.

£n@ish _29

My Cycle

Load

Press the My Cycle button for less than 3 seconds to activate lViy Cycle mode where all course settings and selected options are loaded.

The My Cycle indicator turns on when the mode is active.

If you have not configured any My Cycle settings, the default course settings are loaded.

# Save

You can add and save preferred options to My Cycle.

1, Turn the course dial to select a course. 2, Set necessary options for the selected course. For details on each course and options, see page 27.

3. Press and hold the My Cycle button for more than 3 seconds to save the course options.The My Cycle indicator blinks while the options are being saved.

The Wrinkle Prevent option is not available for the My Cycle function.

Smart Care

This function enables you to check the status of the dryer using a smartphone.

1, Press and hold the Eco Dry (Electric model) or Small Load Care (Gas model) buttons for 3 seconds when an

error occurs or if you haven't pressed any buttons on the dryer after you turned the power on.

2. When the Smart Care function is activated, the LED on the window display rotates for 2 or 3 seconds and then the error code will appear in the display panel.

3. Run the Smart Care app on your smart phone.

The Smart Care function has been optimized for: Galaxy & iPhone series (cannot be supported for

some models).

4. If the smart phone's camera is focused on the display panel of the dryer, the panel and error message is automatically recognized and the error type and countermeasures are displayed on the smart phone.

5. If the smartphone faiEsto recognize the error code more than twice, please enter the error code displayed on the display panel of the dryer manually into the Smart Care app.

Downloadingthe Smart Care app

Download the Samsung Laundry App into your mobile phone from the Android market orApple App store. (Search word : Samsung Smart Washer/Dryer)

# Precautions when using Smart Care

If light from a light bulb, fluorescent bulb, or Br-np is reflected on the display panel of the washing machine, the smartphone may not be able to recognize the pane] or error message easily.

If you hold the smartphone at too large an angle relative to the front of the display panel, it may not be able to recognize the error code. For best results, hold the smartphone so that the front of the panel and the smartphone are parallel or nearly parallel.

+ 102 hidden pages