Samsung Digimax A403, Digimax A503 Owner Manual

Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. ※ This manual is based on model Digimax A503.

User’s Manual

ENGLISH

《1》

Instructions Getting to know your camera

■ Use this camera in the following order

Set up the camera driver

Take a picture

Insert the USB cable

Check the camera’s power

Check [Removable Disk]

Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.60)

Take a picture. (p.12)

Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.62)

Check the camera’s power. If the power is turned off, press the camera button to turn it on.

Open Window’s EXPLORER and search for [Removable Disk]. (p.62)

● Do not use a card reader to copy images from the camera memory card to your

PC. To do so could damage the images. When transferring images to your PC, always use the supplied USB cable to connect the camera to your PC. Please note that the manufacturer accepts no responsibility for loss or damage of images on the memory card due to the use of a card reader.

Thank you for buying a Samsung Digital Camera.

●Prior to using this camera, please read the user manual thoroughly.

●When you require After Sales service, please bring the camera and the cause of

the camera malfunction (such as Battery, Memory card etc.) to the A/S centre.

●Please check that the camera is operating properly prior to when you intend to

use it (e.g. for a trip or an important event) to avoid disappointment. Samsung Camera take no responsibility for any loss or damage that may result from camera malfunction.

●Keep this manual in a safe place. Microsoft, Windows and Windows logo are registered trademarks of Microsoft

Corporation incorporated in the United States and/or other countries.

All brand and product names appearing in this manual are registered trademarks

of their respective companies.

《2》

Danger Caution

: WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

■ Do not use the flash in close proximity to people or animals. Positioning the flash

too close to your subject’s eyes may cause eyesight damage.

■ For safety reasons keep this product and accessories out of reach of children or

animals to prevent accidents e.g.:

•Swallowing battery or small camera accessories. If an accident should occur,

please consult a doctor immediately.

•There is the possibility of injury from the camera’s moving parts.

■

Battery and camera may become hot during prolonged use and it may result in camera malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it time to cool.

■ Do not leave this camera in places subject to extremely high temperatures, such

as a sealed vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to extreme temperatures may adversely affect the camera’s internal components and could cause a fire.

■

hen in use, do not cover the camera or Charger. This may cause heat to build up and distort the

camera body or cause a fire. Always use the camera and its accessories in a well-ventilated area.

: DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

■

Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre.

■ Please do not use this product in close proximity to flammable or explosive

gases, as this could increase the risk of explosion.

■

Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then disconnect the power source. You must contact your dealer or Samsung Camera Service centre. Do not continue to use the camera as this may cause a fire or electric shock.

■

Do not insert or drop metallic or inflammable foreign objects into the camera through access points e.g. the memory card slot and battery chamber. This may cause a fire or electric shock.

■ Do not operate this camera with wet hands. This could pose a risk of electric shock.

: CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in a minor or moderate injury.

■ Leaking, overheating, or burst battery could result in fire or injury.

•Use battery with the correct specification for the camera.

•Do not short circuit, heat or dispose of battery in fire.

•Do not insert the battery with the polarities reversed.

■ Remove the battery when not planning to use the camera for a long period of

time. Battery may leak corrosive electrolyte and permanently damage the camera’s components.

■ Do not fire the flash while it is in contact with hands or objects. Do not touch the

flash after using it continuously. It may cause burns.

■ When using the AC Charger, do not move the camera while it is switched on.

After use, always switch off the camera before unplugging the power cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may lead to cable damage cause a fire or electric shock.

■ Take care not to touch the lens and lens cover to avoid taking an unclear image

and possibly causing camera malfunction.

■ Avoid obstructing the lens or the flash when you capture an image.

Warning

《3》

Contents

READY

●System chart 4

●Identification of features

■Front & Top

■Back & Bottom

■Side/ 5-function button

■Self-timer lamp

■Camera Status Lamp

■Mode icon

●Connecting to a Power Source

●Inserting the memory card

●Instructions on how to use the

memory card

●LCD monitor indicator

●Changing the recording mode

■Selecting the [MODE] menu

■If the [STILL & MOVIE] menu was

selected

■If the [FULL] menu was selected

●Starting the recording mode

■How to use the Auto mode

■How to use the Movie clip mode

■How to use the Program mode

■How to use the Scene modes

■How to use the VOICE

RECORDING mode

■

Pausing while recording a voice recording

■Normal focus mode 16

■Macro focus mode

●Things to Watch Out for When Taking

Pictures

●Using the camera buttons to adjust

the camera

■Power button

■SHUTTER button

●ZOOM W/T button

●

Voice recording/ Voice memo/ UP button

●Down button

●Flash/ Left button

●Self-timer/ Right button

●MENU/ OK button

●M (Mode) button

●E (Effect) button

●Special Effect : Colour

●Special Effect : Preset focus frames

●

Special Effect : Composite shooting

●Special Effect : Photo Frame

●+/- button

■RGB

■ISO

■White balance

■Exposure compensation

●Using the LCD monitor to adjust

the camera settings

●How to use the menu

●Mode

●MODE SET

●Size

●Quality/ Frame rate

●Metering

●Continuous Shooting

●Sharpness

●

OSD(On Screen Display) information

●Starting play mode

■Playing back a still image

■Playing back a movie clip

■How to capture the movie clip

■Playing back a recorded voice

●LCD monitor indicator

●Using the camera buttons to adjust

the camera

●Thumbnail/ Enlargement button

●Voice memo/ Up button

●Play & Pause/ Down button

●Delete button

●Left/ Right/ Menu/ OK button

●Setting up the play back function

using the LCD monitor

●Starting the slide show

●Rotating an image 42

●Resize 42

●Protecting images 43

●Deleting all images 43

●DPOF

●DPOF : STANDARD

●DPOF : INDEX

●DPOF : PRINT SIZE

●DPOF : CANCEL

●COPY TO CARD

●PictBridge

●PictBridge : Picture Selection

●PictBridge : Print Setting

●PictBridge : Printing

●PictBridge : DPOF Printing

●PictBridge : RESET 48

●Setup menu 49

●File name

●Auto power off

●Language

●Formatting a memory

●Setting up the Date / Date type

●Setting up the time

●Imprinting the recording date

●

Connecting an External Device (USB)

●Sound

●LCD brightness

●Quick view

●Initialisation

●Setting up the MYCAM menu

●Start up image

●Start up sound

●Important notes

●Warning indicator

●

Before contacting a service centre

●Specifications

●Software Notes

●System Requirements

●About the software

●Setting up the application software

●Starting PC mode

●Removing the removable disk

●

Setting up the USB Driver for MAC

●Using the USB Driver for MAC

●Uninstalling the USB Driver for

Windows 98SE

●Digimax Master

●FAQ

SETUP

PLAY

RECORDING

SOFTWARE

《4》

System chart

Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.

For Windows

•PC with processor better than MMX

Pentium 450MHz (XP : Pentium II 700MHz)

•Windows 98/98SE/2000/ME/XP

•Minimum 64MB RAM

(Over 128MB recommended)

•200MB of available hard-disk space

(Over 1GB recommend)

•USB port

•CD-ROM drive

•1024 x 768 pixels, 16-bit color display

compatible monitor (24-bit color display recommended)

•DirectX 9.0 or later

For Macintosh

•Power Mac G3 or later

•Mac OS 10.0~10.3

•Minimum 64MB RAM

•110MB of available hard-disk space

•USB port

•CD-ROM drive

•QuickTime 6.01 or later for Movie Clip

System Requirements

When you connect the camera to a computer or printer, you must use the USB cable supplied with the camera, or the external devices may not recognise the camera.

CAUTION



User manual,

Product warranty

Camera case Camera strap

Software CD

(see p.62)

SD memory card/

MMC (see p.9)

DPOF compatible

printer (see p.44)

< Included items >

USB cable

PictBridge compatible

printer(see p.46)

Computer (see p.62)

Rechargeable batteries

(SNB-2512)

CR-V3 battery

Battery charger

(SBC-N1)

AC cord

AA Alkaline

Batteries

《5》

Identification of features

Front & Top



Flash

Shutter button

Microphone

Power button

Self-timer lamp

Lens

Focus ring

《6》

Identification of features

Back & Bottom

LCD monitor

USB connection port

Tripod Socket

Play mode button

5 function button

E (Effects) button

+/-, Delete button

Zoom T button (Digital zoom)

Camera status lamp

Zoom W button (Thumbnail)

Strap eyelet

M(Mode) button

《7》

Identification of features

Side/ 5-function button

Battery chamber

Memory card slot

Battery chamber cover

Voice memo / Voice

Recording / Up button

Flash / Left button

Menu / OK button

Self-timer / Right button

Play & Pause button

■

Mode icon (Refer to page 14 for more information about the camera mode setting.)

■Self-timer lamp

Icon Status Description

- For the first 7 seconds, the lamp blinks at 1 second intervals.

For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals.

For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.

■Camera Status Lamp

Status Description

Power on

The lamp turns on and off when the camera is ready to take a picture

After taking a picture

The lamp blinks while saving the image data and turns off when the camera is ready to take a picture

While movie recording

The lamp blinks

While voice recording

The lamp blinks

USB cable is connected to a PC

The lamp lights up (LCD monitor turns off after initializing the device)

Transmitting Data with a PC

The lamp blinks (LCD monitor turns off)

USB cable is connected to a printer

The lamp is off

When the printer is printing

The lamp blinks

Blinking

MODE MOVIE

VOICE RECORDING

AUTO PROGRAM PLAY

Icon

SCENE

NIGHT PORTRAIT LANDSCAPE SUNSET

Icon

MODE DAWN BACKLIGHT FIREWORKS BEACH&SNOW

Icon

MODE

《8》

Connecting to a Power Source

■ There are 3 indicators for battery condition that are displayed on the LCD monitor.

Battery status

Battery indicator

The battery is fully

charged

Low battery capacity (Prepare to recharge or use spare battery)

■You can use batteries only to provide the camera with power.

● We recommend using batteries for a digital camera (Within a year from the date

of manufacture). The batteries are listed below.

- Non rechargeable batteries : 2 X AA Alkaline (High Capacity) CR-V3 type - Lithium Ion battery

- Rechargeable batteries : 2 X AA Ni-MH (SNB-2512)

● It is easy to buy alkaline batteries. However, the duration for using batteries

varies in accordance with the battery manufacturer or the photographic conditions.

Important information about battery usage

● When the camera is not used, turn off the camera power.

● Do not recharge the non rechargeable batteries. It may cause an explosion.

● Please remove the batteries if the camera will not be used for long periods.

Batteries can lose power over time and are prone to leaking if kept inside the camera.

● We recommend high capacity batteries (listed above) as manganese

batteries cannot deliver sufficient power.

● Low temperatures (below 0°C) can affect the performance of the batteries

and you may experience reduced battery life. Batteries will usually recover at normal temperatures.

● Do not use old and new batteries at the same time. Do not mix battery

brands, type or an old battery with a new one.

● During extended use of the camera, the camera body may become warm.

This is perfectly normal.

INFORMATION

■Insert the battery as shown

- If the camera does not turn on after you have inserted battery, please check whether the battery are inserted with the correct polarity (+/-).

- When the battery chamber cover is opened, do not press the battery chamber cover by unnecessary force. This may cause the battery chamber cover modification or breakage.

Inserting the memory card

■ Insert the memory card as shown.

- Turn off the camera's power before inserting the memory card.

- Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor).

- Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.

《9》

Instructions on how to use the memory card

●Be sure to format the memory card (see p.51) if you are using a newly purchased

memory for the first time, or if contains data that the camera cannot recognise, or if it contains images captured with a different camera.

●Turn off the camera power whenever the memory card is being inserted or

removed.

●Repeated use of the memory card will eventually reduce the memory card’s

performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty.

●The memory card is an electronic precision device.

Do not bend, drop or subject it to any heavy impact.

●Do not store the memory card near with strong electronic or magnetic fields, e.g.

near loud speakers or TV receivers.

●Please do not use or store in extreme temperatures.

●Do not allow the memory card to become dirty or to come into contact with any

liquid. Should this happen, carefully clean the memory card with a soft cloth.

●Please keep the memory card in its case when not in use.

●During and after periods of extended use, you may notice that the memory card

is warm. This is perfectly normal.

●Do not use a memory card that is used in another digital camera. To use the

memory card in this camera, format the memory card by using this camera.

●Do not use a memory card formatted by another digital camera or memory card

reader.

●If the memory card is subjected to any of the following, the recorded data may

become corrupted :

- When the memory card is used incorrectly.

- If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading.

●Samsung cannot be held responsible for lost data.

●It is advisable to copy important data onto other media as back-up e.g. floppy

disks, hard disks, etc. as soon as possible.

●If there is insufficient memory available

: A [CARD FULL!] message will appear and the camera will not operate.

To optimise the amount of memory available, replace the memory card or delete unnecessary images stored on the memory.

Instructions on how to use the memory card

INFORMATION

●Don't remove the memory card when the camera status lamp is blinking as

this may cause damage to data in the memory card.

■The camera can use SD Memory Cards and MMC (Multi Media Cards). Please

consult the enclosed manual for using the MMC Cards.

Card pins

Write protect

switch

Label

[SD (Secure Digital) memory card]

The SD memory card has a write protect switch that prevents image files from being deleted or formatted. By sliding the switch to the bottom of the SD memory card, the data will be protected. By sliding the switch to the top of the SD memory card, the data protection will be cancelled. Slide the switch to the top of the SD memory card before taking a picture.

■When using a 24(Approx. 8)MB memory, the specified shooting capacity will be

as follows. These figures are approximate as image capacities can be affected by variables such as subject matter.

Recorded image size S. FINE FINE NORMAL 24FPS 15FPS

* 5M (2560x1920) 9 18 27 - -

4M (2272x1704) 12(4) 22(7) 34(11) - -

3M (2048x1536) 15(5) 28(9) 41(14) - -

Still

image

2M (1600x1200) 24(8) 45(15) 65(22) - -

1M (1024x768) 55(18) 95(32) 127(43) - -

VGA (640x480) 122(42) 182(62) 218(75) - -

640 (640X480)

Movie

clip

320 (320X240)

※ *A503 only ※ ( ) A403 only

---

23SEC 36SEC

(8SEC) (28SEC)

1MIN23SEC

2MIN3SEC

(12SEC) (42SEC)

《10》

《11》

No. Description Icons Page

2 Battery p.8

3 Continuous shot AEB p.32

4 Flash p.18~20

5 Self-timer p.20

6 Macro p.16

7 Metering p.31

8 Card inserted indicator -

9 Camera shake warning -

10 Date/ Time 2006/01/01 01:00 PM p.51

11 Exposure compensation p.27

12 White Balance p.26~27

13 ISO p.26

RGB RGB

p.25

15 Sharpness p.32

16 Image quality / Frame rate p.31

17 Image size p.30

19 Voice memo p.18

20 Digital Zoom rate p.17

p.10

Remaining time

(Movie clip/ Voice recording)

LCD monitor indicator

[ Image & Full Status ]

■The LCD monitor displays information about the shooting functions and

selections.

①

②

③

④

⑤

⑥

⑦

⑧

⑫

⑪

⑬

⑭

⑯

⑮

⑰

⑱

⑨

⑩

⑳

⑲

《12》

●Changing the recording mode : If the [STILL & MOVIE] menu was selected

Steps from 1-4 are the same as those for selecting the [MODE] menu.

5. The recording mode used just before will display.

6. Press the M (Mode) button located on the back of the camera and the recording mode will change to the movie clip mode.

7. Press the M (Mode) button again and a still image mode selected on the [MODE SET] menu will be selected.

Pressing the M (Mode) button

[AUTO mode]

[MOVIE CLIP mode]

Changing the recording mode

■ You can select the desired working mode by the M (mode) button located on the

back of the camera and [MODE], [MODE SET] menu. Auto, Program, movie clip, scene (night, portrait, landscape, sunset, dawn, backlight, fireworks, beach & snow) camera modes are available.

●Selecting the [MODE] menu

1. Insert the battery (p.8).

2. Insert the memory card (p.8). As this camera has a 24MB internal memory, you do not have to insert the memory card. If the memory card is not inserted, an image will be stored in the internal memory. If the memory card is inserted, an image will be stored on the memory card.

3. Close the battery chamber cover.

4. Press the power button to turn on the camera.

5. Press the menu button and a menu will display.

6. Use the Left/ Right button to select the [MODE] menu.

7. Select [STILL & MOVIE] or [FULL] sub menu by pressing the UP/ DOWN button.

- [STILL & MOVIE] : A still image mode that was selected on the [MODE SET]

menu and movie clip mode can be selected.

Refer to page 14 for more information about using the [MODE SET] menu.

- [FULL] : Auto, Program, Movie clip and scene modes can be selected.

8. Press the MENU button and the menu will disappear.

STILL & MOVIE FULL

MODE

《13》

Changing the recording mode Starting the recording mode

●Changing the recording mode : If the [FULL] menu was selected

Steps from 1-4 are the same as those for selecting the [MODE] menu.

5. The recording mode used just before will display.

6. Press the M (Mode) button located on the back of the camera and the mode

selection menu will display.

7. To select the Auto, Program, Movie clip or Scene modes, press the Left/ Right

button. To move between the Auto, Manual, Movie clip menu line and Scene menu line, press the Up/ Down button.

8. Press the M (Mode) button and the mode selection menu will disappear.

Pressing the Up button

NIGHT

[Selecting the Scene mode]

Pressing the Left button

[Mode selection menu]

AUTO

MOVIE

[Mode selection menu]

SET:OK

■How to use the Auto mode

Use this for shooting basic still images.

1. Select the [FULL] sub menu on the [MODE] menu (p.12).

2. Select the Auto mode by pressing the M (Mode) button (p.22).

3. Point the camera towards the subject and compose the image by using the LCD monitor.

4. Press the shutter button to capture an image.

※ Avoid obstructing the lens or the flash when you capture an image.

■How to use the Movie clip mode

A movie clip can be recorded for as long as the available recording time of the memory capacity allows.

1. Select the [FULL] sub menu on the [MODE]

menu (p.12).

2. Select the Movie clip mode by pressing the M

(Mode) button (p.22).

3. Point the camera towards the subject and

compose the image by using the LCD monitor.

4. Press the shutter button once and movie clips are

recorded for as long as the available recording time allows. Movie clips will still be recorded if the shutter button is released. If you wish to stop recording, press the shutter button again. ※ Image size and type are listed below.

- Image size : 640X480, 320X240 (user selectable)

- Movie clip file type : AVI (MJPEG)

[MOVIE CLIP mode]

[AUTO mode]

《14》

■How to use the Scene modes

Use the menu to easily configure optimal settings for a variety of shooting situations.

1. Select the [FULL] sub menu on the [MODE] menu (p.12).

2. Select the Scene mode by pressing the M (Mode) button (p.22).

3. Point the camera towards the subject and compose the image by using the LCD monitor.

4. Press the shutter button to capture an image.

※ The scene modes are listed below.

[NIGHT]( ) : Use this for shooting still images at night or in other

dark conditions.

[PORTRAIT]( ) : To take a picture of a person.

[LANDSCAPE]( ) : To take pictures of distant scenery.

[SUNSET]( ) : For taking pictures of sunsets.

[DAWN]( ) : Daybreak scenes.

[BACKLIGHT]( ) : Portrait without shadows caused by backlight.

[FIREWORKS]( ) : Firework scenes.

[BEACH&SNOW]( ) : For ocean, lake, beach and snowscape scenes.

[SCENE mode]

Starting the recording mode

[ PROGRAM mode ]

[ Successive recording of a

movie clip ]

●Using Successive Recording

Steps from 1-2 are the same as those for MOVIE CLIP mode.

3. Point the camera towards the subject and compose the image by using the LCD monitor. Press the shutter button and movie clips are recorded for as long as the available recording time. Movie clips will still be recorded if the shutter button is released.

4. Press the Pause button( ) to pause recording.

5. Press the Pause button( ) again to resume the recording.

6. If you wish to stop recording, press the shutter button again.

■How to use the Program mode

Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions.

1. Select the [FULL] sub menu on the [MODE] menu (p.12).

2. Select the Program mode by pressing the M (Mode) button (p.22).

3. Point the camera towards the subject and compose the image by using the LCD monitor.

4. Press the shutter button to capture an image.

00:00:08

■Pausing while recording a movie clip (Successive Recording)

This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips.

《15》

Starting the recording mode

■How to use the VOICE RECORDING mode

A voice recording can be recorded for as long as the available recording time of the memory capacity allows.

1. In any mode with the exception of the Movie clip,

select the VOICE RECORDING mode by pressing the Voice recording button twice.

2. Press the shutter button to record a voice.

- Press the shutter button once and voice is

recorded for as long as the available recording time allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released.

- If you wish to stop recording, press the shutter button again.

- File type : WAV

●Pausing while recording a voice recording

This camera allows you to temporarily stop during unwanted recording, while recording a voice. Using this function, you can record your favorite voices into a voice recording file without having to create multiple voice recording files.

1. Press the shutter button and voice is recorded for as long as the available recording time. Voice will still be recorded if the shutter button is released.

2. Press the Pause button( ) to pause recording.

3. Press the Pause button( ) again to resume the recording.

4. If you wish to stop recording, press the shutter button again.

●A distance of 40cm between you and the camera (microphone) is the best

distance to record sound.

●If the camera power is turned off while the voice recording is paused, the

voice recording is cancelled.

INFORMATION

[VOICE RECORDING mode]

[Pausing the voice recording]

《16》

Starting the recording mode

Using the camera buttons to adjust the camera

■ The recording mode function can be set up by using the camera buttons.

Power button

SHUTTER button

● Used for turning the camera's power on/ off.

● If there is no operation during the specified time,

the camera's power will be turned off automatically to save battery life. Refer to page 50 for more information about the auto power off function.

● Used for taking an image or recording voice in

the recording mode.

● In MOVIE CLIP mode

Pressing the shutter button down fully starts the process for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again.

● In STILL IMAGE mode

Pressing the shutter down fully takes the picture and stores the relevant data regarding the shot. If you select voice memo recording, the recording will start after the camera has finished storing the image data.

● Macro ( ) focus mode

The focus range is 0.2m. A Macro icon( ) will display on the LCD monitor when you select this focus mode. ※To prevent the image from being dim, maintain the

focus range at 0.2m.

■ When the Flash Off or Slow synchro mode is selected in a low lighting condition,

the camera shake warning indicator ( ) may appear on the LCD monitor. In this case, use a tripod, support the camera on a solid surface or change the flash mode to flash shot mode.

■ Backlight compensated shots : When taking an outdoor shot, avoid facing the

sun, as the image may be dark because of the strong backlight. In backlight conditions, please use Fill-in flash(p.18), Spot metering(p.31) or Exposure compensation(p.27).

■ Avoid obstructing the lens or the flash when you capture an image.

● Normal( ) focus mode

The focus range is 1.0m~infinity. No icons will display on the LCD monitor when you select this focus mode.

※To prevent the image from being dim, maintain the

focus range at 1.0m ~ infinity.

Things to watch out for when taking pictures

《17》

● TELE Zoom

Digital zoom TELE : Pressing the ZOOM T button activates the digital zoom

software. Releasing ZOOM T button stops the digital zooming at the required setting. Once the maximum digital zoom (5X) is achieved, pressing the ZOOM T button will have no effect. You can check the digital zoom rate with the [X1.1~X5.0] numerical mark next to the zoom bar.

[ WIDE zoom ] [ Digital zoom 2.5X ] [ Digital zoom 5X ]

Pressing

the ZOOM

T button

Pressing

the ZOOM

T button

● WIDE Zoom

Digital zoom WIDE : When the digital zoom is in operation, pressing the ZOOM

W button will reduce the digital zooming in steps. Releasing ZOOM W button stops digital zooming.

[ Digital zoom 5X ] [ Digital zoom 2.5X ] [ WIDE zoom ]

Pressing

the ZOOM

W button

Pressing

the ZOOM

W button

● If the menu is not displayed, this button works as

the DIGITAL ZOOM button.

● To use the digital zoom the LCD monitor has to be turned on.

● Images taken using the digital zoom may take a little longer for the camera

to process. Allow time for this to take place.

● The digital zoom cannot be used in movie clip shots.

● You may notice a decrease in image quality when using the digital zoom.

INFORMATION

ZOOM W/T button

《18》

Down button

■ While the menu is showing, press the DOWN button to move from the main

menu to a sub menu, or to move down the sub menu cursor.

■ Unless the menu is showing, the DOWN button will not work in a Recording

mode.

Flash ( )/ Left button

Focus type Flash range

Auto 1.0m~3m

Macro 0.2m

[Selecting the Auto flash]

● Flash range (Unit : m)

■When the menu is displayed on the LCD monitor,

pressing the LEFT button makes the cursor shift to the left tab.

■When the menu is not displayed on the LCD monitor,

the LEFT button operates as the FLASH ( ) button.

●Selecting the flash mode

1. Press the M (Mode) button to select a Recording mode with the exception of Movie clip mode (p.22).

2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor.

3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit the picture taking situation.

Voice recording( )/ Voice memo( )/ UP button

■ While the menu is showing, press the UP button to move up the sub menu

cursor. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo button. You can record your voice or add your voice-over to a stored still image. Refer to page 15 for more information about the voice recording.

● Recording a voice memo

1. Select the STILL IMAGE mode by pressing the mode button.

2. Press the VOICE MEMO( ) button. If the voice memo indicator is displayed on the LCD monitor, the setting is completed.

3. Press the shutter button and take a picture. The picture is stored on the memory card.

4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo.

※A distance of 40cm between you and the camera (microphone) is the best

distance to record sound.

[ Preparing for Voice Memo ] [ Recording Voice Memo ]

《19》

Flash ( )/ Left button

●If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move until the second flash fires.

●Using the flash frequently will reduce the life of the battery.

●Under normal operating conditions the charging time for the flash is normally

within 5 seconds. If the battery is weak, the charging time will be longer.

●During the continuous shot, AEB and movie clip mode, the flash function will not operate.

●Take photographs within the flash range.

●The image quality is not guaranteed if the subject is too close or highly

reflective.

●When taking an image in a poorly lit condtion with the flash, there may be a white speck in the captured image. The speck is caused by the reflecting of the flash light from the floating matters. It is not camera malfuction.

INFORMATION

Menu tab

Flash mode Description

●Flash mode indicator

If the subject or background is dark, the camera flash will operate automatically.

Auto flash

Auto &

Red eye

reduction

Fill in flash

Slow

synchro

Flash off

If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function.

The flash will operate in conjunction with a slow shutter speed in order to obtain the correct exposure. When you take an image in a condition with poor light, the camera shake warning indicator ( ) will display on the LCD monitor. We recommend using a tripod for this function.

The flash fires regardless of available light. The intensity of the flash will be controlled, according to the prevailing conditions. The brighter the background or subject is, the less intense the flash will be.

The flash does not fire. Select this mode when capturing images in a place or situation where flash photography is prohibited. When you capture an image in a poorly lit condition, the camera shake warning indicator ( ) will display on the LCD monitor. We recommend using a tripod for this function.

《20》

Self-timer ( )/ Right button

● If you operate the Self-timer and Play mode button during the self-timer

operation, the self-timer function is cancelled.

● Use a tripod to prevent the camera from shaking.

● In Movie Clip mode, only the 10SEC self-timer will work.

● Selecting the self-timer

1. Select the MOVIE CLIP or STILL IMAGE mode by pressing the mode button.

2. Press the SELF-TIMER( ) button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second or double self-timer icon appears on the LCD monitor.

·10SEC self-timer ( ) :

Pressing the shutter button will allow an interval of 10 seconds before the image is taken.

·2SEC self-timer ( ) :

Pressing the shutter button will allow an interval of 2 seconds before the image is taken.

·Double self-timer ( ) :

A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charge time.

3. When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

INFORMATION

[ Selecting the 10 SEC self-timer ]

●Available flash mode, by recording mode

XXOXXXXXXXO

XOOXOX XXXXX

XXOXXXXXOXX

XXOOXXXXXXX

OOOOOOOOXOX

Self-timer ( )/ Right button

■ When the menu is displayed on the LCD monitor, pressing the Right button

makes the cursor shift to the right tab.

■ When the menu is not displayed on the LCD monitor, the Right button operates

as the Self-timer( ). This function is used when the photographer would also like to be in the image.

Flash ( )/ Left button

《21》

MENU/ OK button

[Menu on]

■MENU button

- When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display.

- A menu option can be displayed when Movie clip, Auto, Program and Scene modes are selected.There is no menu available when the Voice recording mode is selected.

■OK button

- When the menu is displayed on the LCD monitor, this button is used for shifting the cursor to the sub menu or for confirming data.

Pressing the MENU button

[Menu off]

2560X1920

2272X1704 2048X1536 1600X1200

SIZE

MOVE: SET:OK

M (Mode) button

[Auto mode] [Movie clip mode]

■ You can select the desired recording mode.

The selectable recording modes are different from what you selected sub menu in the [MODE] menu.

- [STILL & MOVIE] : Select from a recording mode selected in the [MODE SET] menu and Movie clip mode.

- [FULL] : Select from Auto, Movie clip, Program and Scene modes.

● How to use the mode button : In case of [STILL & MOVIE] and [AUTO] sub menu

Pressing the M button

《22》

M (Mode) button E (Effect) button

Pressing the Up button

●How to use the mode button : In case of [FULL] sub menu and Auto mode

※ Press the Mode button and the mode selection menu will disappear.

Pressing the Right button

Pressing the Left/ Right button

Pressing the Left button

[Auto mode]

[Program mode]

[Mode selection menu]

[Movie cliip mode]

[Scene mode]

Pressing the Mode

button

[Selecting a scene mode]

NIGHT

PORTRAIT

MOVIE

PROGRAM

AUTO

SET : OK

■It is possible to add special effects to your images by using this button.

■Still image mode : You can select the colour, focus, composite and frame menus.

Movie clip mode : You can select the colour menu.

■ Available Effects, by recording mode (O : Selectable X : Not selectable)

※ This button will not operate in the Voice recording mode and some scene modes

(Night, Sunset, Dawn, Backlight, Fireworks and Beach & Snow) If a special effect is selected, the rest of the special effect functions (Preset focus frames, Composite shooting, Photo frame) set before, are cancelled automatically.

■ Even if the camera is turned off, the special effect setting will be preserved.

To cancel the special effect, select ( ) in the sub menu of the Colour menu and select ( ) in the sub menu of the special effect menu.

OOOOO

XXOX X

+ 51 hidden pages