SAMSUNG DIGIMAX A40 SERVICE INFORMATION [ENG]

CONTENTS

Ⅰ.SPECIFICATION

1. SPECIFICATION 4

2. SYSTEM REQUIREMENTS

3. LCD monitor indicator

4. CONNECTION DIAGRAM

5. IDENTIFICATION OF FEATURES

Ⅱ.INSTALLATION 11 Ⅲ.EXPLODEDVIEWANDPARTSLIST

1. MAIN ASSEMBLY 16

2. BODY ASSEMBLY

3. BARREL ASSEMBLY

4. FRONT COVER ASSEMBLY

5. BACK COVER ASSEMBLY

6. PACKING ITEM

Ⅳ.ADJUSTMENT

1. Digital camera service 29

2. How to check the FIRMWARE VERSION

3. How to upgrade FIRMWARE

4. How to upgrade the FULL VERSION FIRMWARE

5. ADJUSTMENT

6. EEPROM Data Read/Write

Ⅴ.PATTERNDIAGRAM

1. PARTS ARRANGEMENT FOR EACH PCB ASS’Y

1) MAIN_TOP

2) MAIN_BOTTOM 63

3) UI_TOP

4) UI_BOTTOM

5) USB 65

6) STROBE_TOP

7) STROBE_BOTTOM

8) SENSOR_TOP 68

9) SENSOR_BOTTOM

Ⅵ.CIRCUITDIAGRAM

1. BLOCK DIAGRAM 69

2. POWER BLOCK DIAGRAM

3. CIRCUIT DIAGRAM

1) MEMORY, SD CARD

2) AU_LCD A024CN02

3) STROBE, GPIO, PWM

4) MOTOR AT5555

5) CXD3439GA (3 in 1)

6) POWER

7) SENSOR ICX498DQF

8) POWER INTERFACE

9) BUTTON INTERFACE, AUDIO, USB, UART, SPK, X’TAL, ADC AND EJTAG

10) USB Board

11) STROBE

12) UI Board

Ⅶ. SERVICEINFORMATION

1. The order of disassembly and assembly 83

Type 1/2.5" CCD

Effective Pixel Approx. 4.0 Mega-pixel Total Pixel Approx. 4.2 Mega-pixel

SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35 ~ 105mm)

F No. F2.8 ~ F4.8

Still Image mode : 1.0X ~ 4.0X Play mode : 1.0X ~ 7.0X (depends on image size)

LCD Monitor 2.0" color TFT LCD (1 15,000 pixels)

Type TTL contrast auto focus

Normal : 80cm ~ infinity Macro : 5cm~80cm (Wide), 50cm ~ 80cm (Tele)

Auto Macro : 5cm~Infinity Type Mechanical and Electronic shutter Speed 2 ~ 1/2,000 sec. (Night : 15 ~ 1/2,000 sec.)

Program AE

Metering : Multi, Spot Compensation ±2EV (0.5EV steps) ISO AUTO, 100, 200, 400 Modes Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off Range Wide : 0.25m ~ 2.0m, Tele : 0.5m ~ 1.5m Recharging Time

Approx. 5 sec.

Effect Normal, B&W, Sepia, Negative, Red, Green, Blue, RGB White Balance Auto, Daylight, Cloudy , Fluorescent_H, Fluorescent_L, T ungsten, Custom

Voice Recording (max. 1 hour.),

Voice Memo in Still Image (max. 10 sec.)

Date Imprinting Off , Date, Date & Time (user selectable)

Modes : Auto, Program, Scene

Scene : Night, Portrait, Children, Landscape, Close-up,

Sunset, Dawn, Backlight, Fireworks, Beach & Snow Self-timer : 2 sec., 10 sec., Double(10 sec., 2 sec.) With Audio or without Audio (user selectable, recording time : memory capacity dependent) Size: 640x480,320x240,160x128

(3.0XOptical Zoom,Mute during Zoom Operation) Frame rate : 30 fps, 15 fps Movie Editing (Embeded) : Pause during recording,

Still Image Capture,Time T rimming Internal memory: Approx. 10MB flash memory External memory: SD card /MMC (Up to 512MB Guaranteed) Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0 Movie Clip : A VI (MJPG) Audio : WAV

Ⅰ.SPECIFICATION

Image Sensor

Lens

Focal Length

Range

Control

Digital Zoom

Focusing

Shutter

Exposure

Flash

Voice Recording

Shooting

Storage

Movie Clip

Still Image

Media

File Format

1. SPECIFICA TION

4M : 2272x1704 3M : 2048x1536 2M : 1600x1200 1M : 1024x768 VGA : 640x480 4M : Super Fine 4, Fine 7, Normal 13 3M : Super Fine 5, Fine 9, Normal 16 2M : Super Fine 8, Fine 15, Normal 21 1M : Super Fine 21, Fine 30, Normal 38 VGA : Super Fine 47, Fine 55, Normal 61 ※ These figures are measured under Samsung’s standard conditions and may

vary depending on shooting conditions and camera settings. Type Single image, Thumbnails, Slide show, Movie Clip, Album Editing Trimming, Resizing

Digital output connector : USB 2.0 Audio : Mono PictBridge Primary Batteries: 2 x AA alkaline, or CR-V3(Lithium) battery Secondary Batteries: 2 x Ni-MH, Samsung SBP-1303(Lithium Ion)

※ Included battery may vary depending on sales region. Dimensions (WxHxD) 105.4 x 56.5 x 31.8 (excluding the projecting parts of the camera) Weight Approx. 120g (without battery and card) Operating Temperature 0 ~ 40°C Operating Humidity 5 ~ 85%

Camera Driver Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.0 ~ 10.2) Application Digimax Master

Optical 3.0X Zoom for Movie & Still

2.0" TFT LCD

Power Movie Clip

MJPG VGA 30fps

Easy Mode Change M Button

Delightful Effect (Color Effect, Photo Frame)

Ⅰ.SPECIFICATION

Capacity (10MB)

Storage

Image Size

Image Play

Power Source

Interface

Software

Special Features

For Windows For Macintosh PC with processor better than Pentium II Power Mac G3 or later 450MHz (XP : Pentium 700MHz) Windows 98/98SE/2000/ME/XP Mac OS 9.0 ~ 10.2 Minimum 64MB RAM (XP : 128MB) Minimum 64MB RAM 200MB of available hard-disk space 110MB of available hard-disk space (Over 1GB recommend) USB port USB port CD-ROM drive CD-ROM drive 1024x768 pixels, 16-bit colour display compatible QuickTime player or a media player that monitor (24-bit color display recommended) supports AVI file format DirectX 9.0 or later

2. SYSTEM REQUIREMENTS

No. Description Icons

1 Battery

3 Flash 4 Self-timer 5 Macro 6 Metering 7 Sharpness 8 Card inserted indicator

9 Auto focus frame 10 Camera shake warning 11 Date/ Time 2005.08.01 01:00 PM 12 Exposure compensation 13 ISO 14 White Balance 15 RGB RGB 16 Image quality

■ Recording Mode

Ⅰ.SPECIFICATION

3. LCD monitor indicator

Recording mode

Image size

② ③

④ ⑤ ⑥

⑦ ⑧

⑬ ⑫

⑭

⑮

⑰ ⑯

⑱

⑩⑨ ⑪

⑳①

⑲

Ⅰ.SPECIFICATION

■ Play Mode

No. Description Icons

1 Battery 2 Play mode 3 File Type 4 Voice memo 5 Protect indicator 6 DPOF indicator 7 Card inserted indicator 8 Folder name and Stored image number 100-0009

Number of available shots remaining 1 1

Remaining time (Movie clip/ Voice recording) 00:01:30/ 01:00:00 20 Voice memo/ Mic. off 21 Optical/ Digital Zoom bar

⑧

③

②

①

④ ⑤

⑥

⑦

Size : 2272X1704 Size Av : F2.8 Aperture value Tv : 1/13 Shutter speed ISO : 100 ISO sensitivity Flash : Off Whether or not the

flash is used

Date : 2005/08/01 Recording date

[Play mode display]

[Recording information]

Pressing for

over 1 Sec.

Pressing the Play

mode button

SIZE : 2272X1704

AV : F2.8

TV : 1/13

ISO : 100

FLASH : OFF

DATE : 2005/08/01

4. CONNECTION DIAGRAM

Ⅰ.SPECIFICATION

Lap top

IBM / MAC

USB Cable

MMC Card

DPOF printer

PictBridge printer

Ⅰ.SPECIFICATION

Flash

Playmodebutton

E(Effect)button

+/-,

DELETEbutton

Shutterbutton

Camerastatuslamp

Powerbutton

Self-timerlamp/ AutoFocuslamp

Speaker

Lens

5function button

M(Mode/Album) button

Strapeyelet

ZoomTbutton (Digitalzoom)

Microphone

USBport

LCDmonitor

ZoomWbutton (Thumbnail)

5. IDENTIFICA TION OF FEATURES

Ⅰ.SPECIFICATION

FLASH/

LEFTbutton

MENU/ OKbutton

Macro/DOWNbutton

Play&Pausebutton

SELF-TIMER/ RIGHTbutton

Voicememo/Voicerecording/UPbutton

Memorycardslot

Batterychamber

Batterychambercover

Ⅱ.INSTALLATION

1. Click the [Install] menu in the Auto run frame. The camera driver is installed automatically.

2. Installation is complete. Click the [Finish] button.

3. The Software License Agreement window for DirectX will be displayed. If you agree to this, select [I accept the agreement] and click [Next >] button. the window will then move to the next step. If you disagree, select [I do not accept the agreement] and click [Cancel] button. The installation program will be cancelled.

4. A window will open. Click the [Next >] button.

Ⅱ.INSTALLATION

7. The Digimax Master installation window will be displayed as shown alongside. Click the [Next >] button.

5. DirectX Installation is completed. Click the [Finish] button and Digimax Master installation will be started.

* The system will not reboot even if the [Y es,

I want to restart the computer now] option is selected.

* The screen shot of step 5 can be different with

the illustration according to the system requirements.

6. A window where you can choose the program you want to install will appear. Click [Install]. For information on application software, please refer to page 98.

● If you select [Exit] at step 6, the application program installation will be cancelled.

Ⅱ.INSTALLATION

9. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse..] and choose a folder you want.

10. A window will open, asking you to choose a folder

to which program icons will be added. Click [Next >] button. If you want to choose another folder, click [Browse..] and choose a folder you want.

8. A window will open. Click the [Next >] button.

Ⅱ.INSTALLATION

13. To apply changes, you must restart the computer. Select[Y es, I want to restart my computer now], and then click the [OK] button.

11. Click [Install(I)] button and Digimax Master starts installing.

12. Digimax Master installation is successfully

completed. Click the [Finish] button.

14. After restarting the computer, connect the PC to the camera with the USB cable.

Ⅱ.INSTALLATION

15. Turn the camera power on.

[Found New Hardware Wizard] will open and the computer will recognise the camera.

* If your OS is Windows XP, an image viewer

program will open. If the download window of Digmax Master opens, the camera driver was setup successfully.

16. If you can see [Removable Disk] under [My

computer], the camera driver installation was successful. Now you can transfer image files from the camera to PC via the USB cable.

● If you have installed the camera driver, [Found New Hardware Wizard] may not open.

● On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking

you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied. (for Windows 98 and 98 SE).

● Before connecting the camera to the PC, Y ou should first install the camera driver.

● After installing the camera driver, you have to restart your PC.

● If you connect the camera to the PC before installing the camera driver, the [Found New Hardware Wizard]

will open. In this case, cancel the [Found New Hardware Wizard] and disconnect the camera. Install the camera driver and connect the camera to the PC again.

● Should the computer not find the camera driver after installation, please try one or more of the following measures.

1. Delete the camera driver, and re-install the driver.

2. Refer to FAQ to check for a possible solution to the problem.

3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host Controller), download the

patch file from the Samsung Camera web page. (http://www.samsungcamera.com)

Ⅲ.EXPLODEDVIEWANDPARTLIST

1-1

1-2

1-4

1-3

1. MAIN ASSEMBL Y

Ⅲ.EXPLODEDVIEWANDPARTLIST

▶

PARTS LIST

1-1 Q7217362701A ST1_BATTERY_COVER O 1 1-2 Q6002027201A TAPPING SCREW X 6 1-3 Q6002027301A TAPPING SCREW X 1 1-4 Q6001018001A MACHINE SCREW X 1

Fig.No Parts No. Parts Name Q’ty

Supply Available Parts

Remarks

Ⅲ.EXPLODEDVIEWANDPARTLIST

2-1

2-15

2-41

2-40

2-12

2-13

2-16

2-35

2-14

2-8

2-11

2-3

2-2

2-38

2-5

2-4

2-7

2-6

2-9

2-26

2-37

2-25

2-17

2-34

2-39

2-32

2-27

2-10

2-30

2-10

2-33

2-28

2-29

2-36

2-19

2-20

2-21

2-22

2-24

2-18

2-23

2. BODY ASSEMBL Y

Ⅲ.EXPLODEDVIEWANDPARTLIST

▶

PARTS LIST

2-1 Q7204026201A BATT_HOLDER O 1 2-2 Q6107065601A SPRING-A O 1 2-3 Q6107065701A SPRING-B O 1 2-4 Q6107065801A ST1_BATT_HINGE O 1 2-5 Q6107065801A BAT_SP_PROTECT O 1 2-6 Q9007241601A BATT_CONTACT_ASM O 1 2-7 Q6107065901A BAT_COV_SPRING O 1 2-8 Q7101001301A BATT_PLATE O 1

2-9 Q6002027601A TAPPING SCREW X 10 2-10 Q0101000401A JUMPER WIRE X 2 2-1 1 Q6002027501A T APPING SCREW X 3 2-12 Q3003001001A MIC O 1 2-13 Q9008095301A MAIN BD ASSY O 1 2-14 Q0203000601A MYLAR-SD X 1 2-15 Q9008095401A USB BD ASSY O 1 2-16 Q3001001001A SPEAKER O 1 2-17 Q9008095501A STROBE BD ASSY O 1 2-18 Q9002133501A LENS O 1 2-19 Q2904003401A IR CUT O 1 2-20 Q7309047501A CCD RUBBER O 1 2-21 Q0604005801A CCD SENSOR O 1 2-22 Q7012086901A CCD PLATE O 1 2-23 Q6002027401A SCREW X 4 2-24 Q7409213601A SPONGE X 1 2-25 Q9008095801A SMT STROBE BD O 1 2-26 Q2401009301A FLASH EC O 1 2-27 Q7112009501A FLASH_FIXER X 1 2-28 Q7014007001A REFLECTOR X 1 2-29 Q7214088701A ST1 FLASH COVER X 1 2-30 Q0109000301A COPPER FOIL X 1 2-31 Q0102017101A WIRE X 1 2-32 Q0203001001A INSULATION TAPE X 1 2-33 Q0611005001A FLASH TUBE XE X 1 2-34 Q6049000201A FLASH-BAND X 1 2-35 Q0601006901A LED O 1 2-36 Q6002027301A TAPPING SCREW X 2 2-37 Q0611004901A MYLAR_STROBE X 1 2-38 Q9007249201A BATTER Y SPRING ASSY O 1 2-39 Q9008095601A FLASH ASSY O 1

Fig.No Parts No. Parts Name Q’ty

Supply Available Parts

Remarks

Ⅲ.EXPLODEDVIEWANDPARTLIST

3-1

3- 23

3-30

3-2

3-35

3-3

3-4

3-20

3-31

3-32

3-34

3-9

3-20

3-11

3-12

3-18

3-13

3-15

3-16

3-17

3-8

3-14

3-27

3-26

3-5

3-7

3-6

3-25

3-28

3-24

3-19

3-45

3-42

3-44

3-41

3-51

3-52

3-53

3-54

3-46

3-40

3-39

3-47

3-56

3-49

3-48

3-50

3-36

3-33

3-10

3-37

3-22

3-21

3-22

3-38

3-55

3. BARREL ASSEMBL Y

Ⅲ.EXPLODEDVIEWANDPARTLIST

▶

PARTS LIST

3-1 Q9002135901A LENS BASE ASS'Y 1 O

3-2 Q7212184003A LENS BASE 1 O

3-3 Q7411097601A AF GUIDER BAR_A 1 O

3-4 Q7411097701A AF GUIDER BAR_B 1 O

3-5 Q7411085902A ZOOM GEAR_A SHAFT 1 O

3-6 Q7411097801A ZOOM GEAR_B SHAFT 4 O

3-7 Q7411090001B ZOOM GEAR_C SHAFT 2 O

3-8 Q7411097901B ZOOM GEAR_D SHAFT 1 O

3-9 Q3107001701A ZOOM MOTOR 1 O 3-10 Q961 1142007 SCREW 2 X 3-1 1 Q7212160001B ZOOM MOTOR GEAR 1 O 3-12 Q7212160101A ZOOM GEAR_A 1 O 3-13 Q7411085802A ZOOM GEAR_D 1 O 3-14 Q7411085702A ZOOM GEAR_C 1 O 3-15 Q7411085601B ZOOM GEAR_B 1 O 3-16 Q7212160602B ZOOM GEAR_E 2 O 3-17 Q7212172701A ZOOM GEAR_H 3 O 3-18 Q7212173801A ZOOM GEAR_G 1 O 3-19 Q7212172601A ZOOM COVER 1 O 3-20 Q7012075904A ZOOM COVER_B 1 O 3-21 Q6003040401A SCREW 2 X 3-22 Q0961900301A SCREW 1 X 3-23 Q9008062101A MAIN FPCB ASS'Y 1 O 3-24 Q4101025801A MAIN F PCB 1 X 3-25 Q9002104301A AF MOTOR ASS'Y 1 O 3-26 Q4101026701A ZOOM MOTOR FPCB 1 X 3-27 Q0608001001A PHOTO INTERRUPTER 2 O 3-28 Q0608000701A PHOTO REFLECTOR 1 O 3-29 Q7012069301A AF CLIP 1 O 3-30 Q9002129801A 3rd LENS BARREL ASS'Y 1 O 3-31 Q9002128901A 3rd LENS ASS'Y 1 X 3-32 Q7012079101A AF CLIP HOLDER 1 X 3-33 Q6001014001A SCREW 1 X 3-34 Q6107048305A 3RD LENS BARREL SPRING 1 O 3-35 Q7212181401A AF GUIDE HOLDER 1 O 3-36 Q0961900101A SCREW 1 X 3-37 Q0994913101A SCREW 1 X 3-38 Q6003040401A SCREW 2 X 3-39 Q7212180803A GUIDE PLATE 1 O 3-40 Q9002129001A 2nd LENS BARREL ASS'Y 1 O 3-41 Q9002128801A 2nd LENS ASS'Y 1 X 3-42 Q9005017101A SHUTTER ASS'Y 1 O 3-43 Q9002128702A 1st LENS ASS'Y 1 O 3-44 Q7409155801A SHUTTER SHIELD 1 O 3-45 Q741 1106802A 2ND MOVE PIN 3 X 3-46 Q7012075703A F_PCB GUIDER 1 O 3-47 Q7212180702A ZOOM RING 1 O 3-48 Q7409138001A FRONT SHIELD 1 O 3-49 Q7012079001A 1ST PUSH PLATE 1 O 3-50 Q741 1106702A 1ST MOVE PIN 3 X 3-51 Q7212180901A CAM BARREL 1 O 3-52 Q7012081901A FINDER HOLDER 1 O 3-53 Q9002133301A OUTER GUIDE BARREL ASS'Y 1 O 3-54 Q7212181001A OUTER CAM BARREL 1 O 3-55 Q9761173007 SCREW 5 X

Fig.No Parts No. Parts Name Q’ty

Supply Available Parts

Remarks

Ⅲ.EXPLODEDVIEWANDPARTLIST

4-1

4-13

4-12

4-14

4-2

4-3

4-4

4-6

4-11

4-8

4-10

4-9

4-7

4-5

4. FRONT COVER ASSEMBL Y

Ⅳ.ADJUSTMENTⅢ.EXPLODEDVIEWANDPARTLIST

▶

PARTS LIST

4-1 Q7217371701A FRONT_COVER A40-Digimax X 1

Q7217371801A FRONT_COVER Q1-Kenox X 1 4-2 Q7104000501A LENS_RING X 1 4-3 Q7101001401A SAMSUNG-BADGE X 1 4-4 Q7209002801A GRIP O 1 4-5 Q6002027501A TAPPING SCREW X 7 4-6 Q7217362901A AF_WINDOW X 1 4-7 Q7217371901A MID_CASE X 1 4-8 Q7217363101A POWER_KEY X 1 4-9 Q6107066001A SPRING O 1

4-10 Q7217363201A SHUTTER_KEY O 1 4-11 Q7309047601A USB O 1 4-12 Q9007248601A MIDDLE COVER ASSY O 1 4-13 Q9007248701A FRONT COVER SUB ASSY -Digimax O 1

Q9007248801A FRONT COVER SUB ASSY -Kenox O 1

4-14 Q9007248901A FRONT COVER ASSY -Digimax O 1

Q9007249001A FRONT COVER ASSY -Kenox O 1

Fig.No Parts No. Parts Name Q’ty

Supply Available Parts

Remarks

Ⅲ.EXPLODEDVIEWANDPARTLIST

5-1

5-16

5-7

5-9

5-8

5-11

5-2

5-3

5-6

5-12

5-21

5-20

5-13

5-14

5-22

5-5

5-4

5-10

5-18

5-19

5-15

5-17

5. BACK COVER ASSEMBL Y

Ⅲ.EXPLODEDVIEWANDPARTLIST

▶

PARTS LIST

5-1 Q7217372001A REAR_COVER X 1 5-2 Q7217363501A 5WAY_KEY O 1 5-3 Q7217363401A MENU_KEY O 1 5-4 Q7209001901A LIGHT X 1 5-5 Q9008095701A UI BD ASSY O 1 5-6 Q7307007001A 5W-RUBBER O 1 5-7 Q7217372101A TW_KEY X 1 5-8 Q7307007101A TW_KEY -RUBBER O 1 5-9 Q7209002901A STARP_RING X 1

5-10 Q7209003001A FUNCTION_KEY X 1 5-1 1 Q7209003101A DIS-KEY O 1 5-12 Q0704012101A LCD PANNEL O 1 5-13 Q7001007101A LCD_BRACKET X 1 5-14 Q7409213701A MYLAR_LCD X 1 5-15 Q6002027601A TAPPING SCREW X 9 5-16 Q7409213901A LCD BEZEL X 1 5-17 Q6001018001A MACHINE SCREW X 1 5-18 Q7409213801A LCD SPONGE X 1 5-19 Q9007249101A REAR COVER SUB ASSY O 1 5-20 Q9010053701A LCD ASSY (Without LCD) O 1

Fig.No Parts No. Parts Name Q’ty

Supply Available Parts

Remarks

Ⅲ.EXPLODEDVIEWANDPARTLIST

6. P ACKING ITEM

6-11 6-18 6-15 6-16

6-12

6-17

6-14

6-1

6-4

6-7

6-10

6-13

6-5

6-9

6-2

6-8

6-6

6-3

Ⅲ.EXPLODEDVIEWANDPARTLIST

▶

PARTS LIST

6-1 QP960210101A PE BAG (FOR CAMERA) O 1 6-2 Q6909011601A PE BAG (FOR ACCESSORY) O 1 6-3 Q6909017301A

AIR BAG_Digimax A55W(FOR CAMERA)

6-4 Q6909017401A

AIR BAG_Digimax A55W(FOR POUCH)

6-5 Q6901215101A

INNER P AD_D Digimax A50 KOR/EXP

O1 6-6 Q6904027801A POUCH_Digimax A50 O 1 6-7 Q6806288101A Q/GUIDE_Digimax A40_ENG O 1

Q6806287901A Q/GUIDE_KENOX Q1_KOR O 1 Q6806288201A Q/GUIDE_Digimax A40_GER O 1 Q6806288301A Q/GUIDE_Digimax A40_FRA O 1 Q6806288401A Q/GUIDE_Digimax A40_SPA O 1 Q6806288501A Q/GUIDE_Digimax A40_ITA O 1 Q6806288601A Q/GUIDE_Digimax A40_TUR O 1 Q6806288701A Q/GUIDE_Digimax A40_DUT O 1 Q6806288801A Q/GUIDE_Digimax A40_POR O 1 Q6806288901A Q/GUIDE_Digimax A40_SWE O 1 Q6806289001A Q/GUIDE_Digimax A40_DEN O 1 Q6806289101A Q/GUIDE_Digimax A40_FIN O 1 Q6806289201A Q/GUIDE_Digimax A40_RUS O 1 Q6806289301A Q/GUIDE_Digimax A40_CHI(S) O 1 Q6806289401A Q/GUIDE_Digimax A40_CHI(T) O 1 Q6806289501A Q/GUIDE_Digimax A40_IND O 1 Q6806289601A Q/GUIDE_Digimax A40_ARA O 1

6-8 Q6806289701A U/MANUAL_Digimax A40_ENG O 1

Q6806288001A U/MANUAL_KENOX Q1_KOR O 1 Q6806289801A U/MANUAL_Digimax A40_GER O 1 Q6806289901A U/MANUAL_Digimax A40_FRA O 1 Q6806290001A U/MANUAL_Digimax A40_SPA O 1 Q6806290101A U/MANUAL_Digimax A40_ITA O 1 Q6806290201A U/MANUAL_Digimax A40_TUR O 1 Q6806290301A U/MANUAL_Digimax A40_DUT O 1 Q6806290401A U/MANUAL_Digimax A40_POR O 1 Q6806290501A U/MANUAL_Digimax A40_SWE O 1 Q6806290601A U/MANUAL_Digimax A40_DEN O 1 Q6806290701A U/MANUAL_Digimax A40_FIN O 1 Q6806290801A U/MANUAL_Digimax A40_RUS O 1 Q6806290901A U/MANUAL_Digimax A40_CHI(S) O 1

Fig.No Parts No. Parts Name Q’ty

Supply Available Parts

Remarks

Ⅲ.EXPLODEDVIEWANDPARTLIST

Q6806291001A U/MANUAL_Digimax A40_CHI(T) O 1 Q6806291 101A U/MANUAL_Digimax A40_IND O 1 Q6806291201A U/MANUAL_Digimax A40_ARA O 1

6-9 Q6807003003U W ARRANTY CARD_EXP O 1

QP955150101F WARRANTY CARD_KOREA O 1 Q6807010903C WARRANTY CARD_RUS(3 YEARS) O 1

Q680701 1301B WARRANTY CARD_TSOE(CHINA) O 1 Q6807012101A WARRANTY CARD_IRAN O 1 Q6807009502E CARD_PRODUCT MEXICO O 1

6-10 Q6901217201A

G/T BOX_Digimax A40_EXP/AUS_Silver(Alkaline)

O1 Q6901217101A G/T BOX_KENOX Q1_KOR O 1 Q6901217301A

G/T BOX_Digimax Cyber 400_CHI(S)(SNB-2312)

O1 Q6901219301A

G/T BOX_Digimax A40_CHI(S)(SNB-2312)

O1 Q6901217401A

G/T BOX_Digimax A40_USA/CAN_Silver(Alkaline)

6-1 1 Q7409197001A STRAP_DIGIMAX_A50/L50 O 1 6-12 Q3802004001A USB CABLE_Digimax L50/A50 O 1 6-13 Q4609012501A Digimax Master O 1 6-14 Q7409204401A

FCC LABEL_Digimax A40_EXP (MADE IN CHINA)

O1 Q7409204501A

FCC LABEL_Digimax A40_EXP (MADE BY SAMSUNG)

O1 Q7409204301A

MIC LABEL_KENOX Q1_KOR (MADE IN CHINA)

6-15 Q4602000701A

SECURE DIGIT AL CARD(64MB) Samsung

O1 Q4602001301A

SECURE DIGIT AL CARD(128MB) Samsung

O1 Q1 107002801A Multi Media Card (64MB) Samsung O 1 Q1 107002901A Multi Media Card (128MB) Samsung O 1 Q1 107003001A Multi Media Card (256MB) Samsung O 1 Q1 107003101A Multi Media Card (512MB) Samsung O 1 Q1 107003201A Multi Media Card (1GB) Samsung O 1

6-16 Q4301003101A

Ni-MH BA TTER Y SNB-2312 (1.2V, AA) - SAMSUNG

6-17 Q4301003001A Ni-MH CHARGER SBC-N1 O 1 6-18 Q3801003001A AC CODE CABLE_KOR-D1 O 1

Q3801003201A AC CODE CABLE_EXP-D1 O 1 Q3801003101A AC CODE CABLE_USA-D1 O 1 Q3801001001A AC CODE CABLE_UK-DSC220SE O 1 Q3801003401B AC CODE CABLE_AUS-D1 O 1

Fig.No Parts No. Parts Name Q’ty

Supply Available Parts

Remarks

+ 62 hidden pages