Samsung CB-21N112T, CW-21M063NS, CZ-21M163N, CZ-21M163Z, CZ-21M063Z User Manual

...

COLOUR

TELEVISION

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

REMOTE CONTROL

ON-SCREEN MENUS

TELETEXT FUNCTION (depending on the model)

Safety Instructions

ENG

Do not expose the television to extreme temperature conditions or to extreme humidity conditions.

Do not expose the television to direct sunlight and other sources of heat.

Do not expose the television to any liquids.

Never put objects of any kind into the television, and do not place a water-containing vessel on the television.

During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.

Do not step on or twist the power cord.

Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.

Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.

If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

Do not drop the remote control.

This device is not for use in industrial environments.


					The lightning flash and arrow head


			CAUTION	!	within the triangle is a warning sign
			RISK OF ELECTRIC SHOCK		alerting you of “dangerous voltage”
			RISK OF ELECTRIC SHOCK		inside the product.
			DO NOT OPEN		inside the product.
			DO NOT OPEN
					The exclamation point within the	!

	CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
	CAUTION: TO PREVENT ELECTRICAL SHOCK, DO				triangle is a warning sign alerting
	NOT REMOVE REAR COVER, NO USER SERVICEABLE				triangle is a warning sign alerting
	NOT REMOVE REAR COVER, NO USER SERVICEABLE				you of important instructions
	PARTS INSIDE. REFER SERVICING TO QUALIFIED				you of important instructions
	PARTS INSIDE. REFER SERVICING TO QUALIFIED				accompanying the product.
	SERVICE PERSONNEL.				accompanying the product.


WARNING: TO PREVENT DAMAGE WHICH MAY					The main voltage is indicated on the rear
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE
		Caution

							of the TV set and the frequency is 50 or



	THIS APPLIANCE TO RAIN OR MOISTURE.
	THIS APPLIANCE TO RAIN OR MOISTURE.						60Hz.
							60Hz.

ENG

	Contents
PREPARING YOUR TELEVISION
■	Safety Instructions .........................................................................................	2
■	Caution ..........................................................................................................	2
■	Front Panel Controls (depending on the model)............................................	4
■	Using the Buttons on the Front Panel............................................................	4
■	Connection Panels ........................................................................................	5
■	Infrared Remote Control (All Functions Except Teletext) ..............................	6
■	Infrared Remote Control (Teletext Functions) ...............................................	7
■	Inserting the Batteries in the Remote Control................................................	8
■	Connecting the Aerial or Cable Television Network ......................................	8
■	Switching Your Television On and Off...........................................................	9
■	Placing Your Television in Standby mode .....................................................	9
■	Plug & Play Feature (depending on the model).............................................	10
■	Choosing Your Language..............................................................................	11
SETTING UP THE CHANNELS
■	Storing the Channels Automatically...............................................................	12
■	Selecting a Channel Numbered Ten or Over ................................................	12
■	Storing the Channels Manually......................................................................	13
■	Skipping Unwanted Channels .......................................................................	14
■	Fine tuning Channel Reception .....................................................................	15
■	Sorting the Stored Channels .........................................................................	16
USING THE TELEVISION
■	Changing the Picture Standard .....................................................................	17
■	Selecting the Picture Format (depending on the model) ...............................	17
■	Adjusting the Picture Settings .......................................................................	18
■	Changing the Sound Standard (depending on the model) ............................	19
■	Adjusting the Sound Settings (depending on the model) ..............................	20
■	Adjusting the Volume.....................................................................................	20

■Extra Sound Settings (depending on the model)

	(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) ....................................	21
■	Selecting the Sound Mode (depending on the model) ..................................	22
■ Switching the Sound Off Temporarily ............................................................		23
■	Setting the Sleep Timer .................................................................................	24
■	Setting and Displaying the Current Time (depending on the model).............	25
■ Switching the Television On and Off Automatically (depending on the model) ...		26
■	Activating the Child Lock ...............................................................................	27
■	Setting the Blue Screen Mode.......................................................................	28
■ Using the LNA (Low Noise Amplifier) feature (depending on the model) ......		28

USING THE TELETEXT FUNCTION (depending on the model)

■	Teletext Decoder (depending on the model) .................................................			29
■	Displaying Teletext Information (depending on the model) ...........................			29
■	Selecting a Specific Teletext Page (depending on the model) ......................			30
■	Using FLOF to Select a Teletext Page (depending on the model) ................			31
■	Storing Teletext Pages (depending on the model) ........................................			32
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■	Viewing Picture From External Sources		........................................................	32
■	Connecting to the Audio/Video Input/Outputs ...............................................			33
■	Automatic Degaussing to Remove Color Patches.........................................			34
■	Troubleshooting: Before Contacting Service Personnel................................			34
■	Wiring the Mains Power Supply Plug (UK Only)............................................			35
Symbols
	Press	Important	Note

	Front Panel Controls (depending on the model)
ENG	Buttons and markings are subject to change.

Œ MENU DISPLAY

´ VOLUME ADJUSTMENT

ˇ CHANNEL SELECTION

¨ REMOTE CONTROL SENSOR

ˆ STAND-BY INDICATOR

Ø POWER

Using the Buttons on the Front Panel

If your remote control no longer works or you have lost it, you can use the controls on the front panel of the television to:

Switch on the television when it is in Standby mode and select channels ( or C/P.)

Access the main menu ( )

Adjust the volume ( )

Buttons on the front panel have the same function as corresponding buttons on the remote control.

Connection Panels

The actual configuration on your TV may be different, depending on	ENG
your model.

Front (or Side) of TV

RCA AUDIO/VIDEO INPUT

CONNECTORS

Connecting earphones ( ) /headphones ( )

You can connect a set of earphones/headphones to your television if you wish to watch a television programme without disturbing the other people in the room.

Prolonged use of earphones/headphones at a high volume may damage your hearing.

Rear of TV

	OUTPUT		OUTPUT
VIDEO	AUDIO	VIDEO	AUDIO
	INPUT		INPUT

C	B	C
C		B
VIDEO AUDIO		(MONO)
VIDEO AUDIO		VIDEO L-AUDIO-R
MONITOR		MONITOR
-OUT		-OUT
INPUT		INPUT

A)SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR

B)75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK

C)RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS

Infrared Remote Control (All Functions Except Teletext)

ENG	Buttons and markings are subject to change.

POWER

DIRECT CHANNEL SELECTION

ONE/TWO-DIGIT CHANNEL

SELECTION

VOLUME INCREASE

TEMPORARY SOUND SWITCH-

OFF

VOLUME DECREASE

TUNER/CABLE NETWORK

SELECTION

MENU DISPLAY/ LNA : Low Noise Amplifier

(depending on the model)

MOVE TO THE REQUIRED MENU

OPTION/

ADJUST AN OPTION VALUE

RESPECTIVELY

PICTURE SIZE

SOUND MODE SELECTION (OPTION)

TURBO SOUND ON/PLUS/OFF (OPTION)

SOUND MENU DISPLAY (OPTION)

SWITCH REPEATEDLY

BETWEEN THE LAST TWO

CHANNELS DISPLAYED

NEXT CHANNEL

EXTERNAL INPUT SELECTION

PREVIOUS CHANNEL

ON-SCREEN DISPLAY

EXIT FROM ANY DISPLAY

CHANGE CONFIRMATION

AUTOMATIC SWITCH-OFF

PICTURE STANDARD

SOUND STANDARD (OPTION)

Operation of remote control may be affected by bright artificial light near to the TV set.

Infrared Remote Control (Teletext Functions)

	Buttons and markings are subject to change.
	ENG

TELETEXT HOLD

TELETEXT NEXT PAGE

LIST/FLOF MODE SELECTION

TELETEXT PREVIOUS PAGE

TELETEXT REVEAL

PROGRAMME SELECTION

BY NAME/ LNA : Low Noise Amplifier (depending on the model)

TELETEXT SUB-PAGE

TELETEXT SIZE SELECTION

TELETEXT DISPLAY/MIX TELETEXT STORE

FASTEXT TOPIC SELECTION

Inserting the Batteries in the Remote Control

ENG

You must insert or replace the batteries in the remote control when you :

Purchase the television.

Find that the remote control is no longer operating correctly.

1Remove the cover of the remote control by pressing the symbol () and pulling the cover in the direction of the arrow.

2 Insert batteries, taking care to respect the polarities:

+ on the battery with + on the remote control- on the battery with - on the remote control

3Replace the cover by pushing it in the direction of the arrow.

Connecting the Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

An outdoor aerial

A cable television network

A satellite network

Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.

75Ω

	or
	Cable
	Television
Rear of TV	Network
Rear of TV

Switching Your Television On and Off

ENG

The mains lead is attached to the rear of the television.

If you have purchased this television in the United Kingdom, refer to page 35 for further instructions on plug wiring.

1Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.

2Press the “” (ON/OFF) button on the front of the television. Result: The Standby indicator lights up on the front panel.

3 Press the POWER () button on the remote control to switch the television on.

Result: The programme that you were watching last is reselected automatically.

4 To switch your television off, press the “” (ON/OFF) button again on the front of the television.

Placing Your Television in Standby mode

Your television can be placed in Standby mode, in order to reduce:

Power consumption

Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

The television is placed automatically in Standby mode when you turn it on.

1 Press the POWER () button on the remote control.

Result: The screen is turned off and the Standby indicator on the front of the television lights up.

2 To switch the screen back on, simply press the POWER () button again on the remote control.

You can also switch on by pressing the P or button.

Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.

Samsung CB-21N112T, CW-21M063NS, CZ-21M163N, CZ-21M163Z, CZ-21M063Z User Manual

Plug & Play Feature (depending on the model)

ENG

Plug & Play

Ant. Input : Check

Auto Store	Exit
P 1
471 MHz	48 %

Exit

Time

Clock 11 : 35

Move Exit

ENJOY YOUR WATCHING


		Function
Language : English
Time		√
Plug & Play		√
Blue Screen		: Off
Child Lock		√


Select	Enter	Exit

When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1If the television is in Standby mode, press the POWER () button on the remote control.

Result: The message Plug & Play is displayed. It flickers for a little while and then the “Language” menu is automatically displayed.

2Press the ▲ or ▼ button to select required language. Press the MENU () button to enter the language, and then the message

Ant. Input : Check is displayed.

If any language is not selected on the Language menu, the “Language” menu will be displayed about 30 seconds later.

3Make sure that the antenna is connected to the TV. And then press the œ or √ button to store the channels (refer to “Storing the Channels Automatically” on page 12).

Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range.

4When searching and storing is complete, the Time menu is displayed.

5Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button (refer to “Setting and Displaying the Current Time” on page 25).

6When you have finished, press the MENU () button.