Samsung CXM 2785TP User Manual

Owner’s Instructions
3WAY COMBINATION UNIT
...........................................................................................................................
.............
CXM2785TP CXN2085TP
Warning! Important
Safety Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Caution: FCC/CSA regulations state that any unauthorized changes or modifica­tions to this equipment may void the user’s authority to operate it.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
Important: One Federal Court has held that unauthorized recording of
copyrighted TV programs is an infringement of U.S. copyright laws. Certain Canadian programs may also be copyrighted and any unauthorized
recording in whole or in part may be in violation of these rights.
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
S
AFETY
1
Thank You for Choosing Samsung
Thank you for choosing Samsung! Your new Samsung TV represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabili­ties, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come.
Important Safety Information
Always be careful when using your TV receiver. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine.
• Read all safety and operating instructions before operating your TV.
• Keep the safety and operating instructions for future reference.
• Heed all warnings on the TV receiver and in the operating instructions.
• Follow all operating and use instructions.
• Unplug the TV receiver from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners.
• Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury.
• Do not use the TV receiver where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc.
• Do not place the TV on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling TV can cause serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manu­facturer or sold with the TV. Follow the manufacturer’s instruc­tions when mounting the unit, and use a mounting accessory rec­ommended by the manufacturer. Move the TV and cart with care. Quick stops, excessive force, and uneven surfaces can make the unit and cart unsteady and likely to overturn.
• Provide ventilation for the TV receiver. The unit is designed with slots in the cabinet for ven­tilation to protect it from overheating. Do not block these openings with any object, and do not place the TV receiver on a bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the TV receiver on a rack or bookcase, ensure that there is adequate ventilation and that you’ve followed the manufacturer’s instructions for mount­ing.
• Operate your TV receiver only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.
2S
AFETY
• Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will pre­vent damage to the unit due to lightning and power-line surges.
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines can be fatal.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the TV.
• Ground outdoor antennas. If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding elec­trode.
• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the TV has been exposed to rain or water
- if the TV does not operate normally by following the operating instructions
- if the TV has been dropped or the cabinet has been damaged
- when the TV exhibits a distinct change in performance
• If you make adjustments yourself, adjust only those controls that are covered by the operat­ing instructions. Adjusting other controls may result in damage and will often require exten­sive work by a qualified technician to restore the TV to normal.
• When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit.
• Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine that the TV is in a safe operating condition.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may cause undesired operation.
This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.
EXAMPLE OF ANTENNA GROUNDING
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
NEC — NATIONAL ELECTRICAL CODE
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
C
ONTENTS
1
CONTENTS
Chapter 1:
Your New 3Way Combination Unit
. . . . . . . . . . . . . . . . 1.1
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1
Familiarizing Yourself with The 3way Combination Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2
Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2
Front/Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4
Remote Control (TV Function Buttons) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5
Remote Control (DVD Function Buttons). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6
Remote Control (VCR Function Buttons) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7
Chapter 2: Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1
Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Connecting to a Cable Box that Descrambles
All Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Connecting to a Cable Box that Descrambles
some Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3
Connecting a Second VCR to Record from the TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4
Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5
Connecting an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6
Installing Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7
Chapter 3: TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1
Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1
Viewing the Menus and On-Screen Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1
Viewing the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1
Selecting a Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2
Memorizing the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3
Storing Channels in Memory (Automatic Method) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4
Adding and Erasing Channels (Manual Method). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5
Changing Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6
Using the Channel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6
Directly Accessing Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6
Using the Pre-CH Button to select the Previous Channel . . . . . . . . . . . . . . . . . . . . . . . . 3.6
Adjusting the Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7
Using Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7
Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9
Changing the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.11
Fine Tuning Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.12
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.13
Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.14
Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.15
Using Automatic Sound Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16
Choosing a Multi-Channel Soundtrack (MTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.17
Viewing a VCR or Camcorder Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.18
Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.19
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.23
Setting the Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.25
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.26
Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.27
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.27
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.28
How to Set up Restrictions Using the “TV guidelines”. . . . . . . . . . . . . . . . . . . . . . . . . . 3.28
How to Set up Restrictions using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
How to Reset the TV after the V-Chip Blocks
a Channel (“Emergency Escape”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.31
Chapter 4: DVD Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1
Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1
Stopping Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1
Removing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1
Pausing Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1
Step Motion Playback (Except CD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2
Slow Motion Playback (Except CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2
2 C
ONTENTS
CONTENTS
Chapter 4: DVD Operation (Cont.) . . . . . . . . . . . . . . . . . . . . . . . . 4.3
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3
Searching through a Chapter or Track. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3
Skipping Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3
Using the Display Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4
When Playing a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4
When Playing a CD/VCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5
Repeat Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6
Program Play and Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7
Random Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7
Using the Disc View Function (VCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8
Track View/Index View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9
Using the AUDIO Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9
Using the MENU Button (When playing a DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11
Using the SUBTITLE button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11
Using the MENU Button (When playing a DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12
Using the Master Volume Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.13
Using the Zoom Function (DVD/VCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.13
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14
Using the Bookmark Function (DVD/VCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14
Recalling a Marked Scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14
Clearing a Bookmark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.15
MP3 Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.16
MP3 Play Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.16
Program/Random playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.16
CD-R MP3 discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.17
Setting up the Language Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.18
Using the Player Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.18
Using the Disc Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.19
Setting up the Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.20
Setting up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.22
Setting up the Display Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.23
Chapter 5: VCR Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1
Inserting and Ejecting a Video Cassette Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1
Playing a Pre-Recorded Video Cassette Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2
Playing the Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2
Pausing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2
Using Picture Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3
Using Automatic Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3
Using the Time Counter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4
Using Memory Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5
Using P.PLUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6
Recording TV Programs As You Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.7
Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.7
Editing While Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8
Using Advanced Recording Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9
Using One-Touch Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9
Recording at a Later Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.10
Using Program Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13
Using True Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.14
Using Block Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.15
MTS (Multi-Channel Television sound) System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16
Selecting the MTS System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16
MTS Recording/Monitor Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16
Video Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.17
Making the Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.17
Video Dubbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.18
Using Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19
Frame Advance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19
Slow motion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19
Chapter 6: Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1
Identifying TV Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1
Identifying DVD Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2
Identifying VCR Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3
Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1
Cleaning and Maintaining Your 3Way Combination Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1
Using Your 3Way Combination Unit in Another Country. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1
Learning About Video Cassette Tapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.2
Sending Tapes to Another Country. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.3
CHAPTER ONE: YOUR NEW 3WAY COMBINATION UNIT 1.1
List of Features
Your 3way Combination Unit was designed with the latest technology. This 3way Combination Unit is a high-performance unit that includes the following spe­cial features:
TV Features
• Full Flat screen
• Automatic timer to turn the 3way Combination Unit on and off
• Adjustable picture and sound settings that can be stored in the 3way Combination Unit’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• V-chip function
DVD Features
DTS digital output for DTS-enhanced DVDs
Playback MP3 files from CD-ROM
VCR Features
Hi-Fi Stereo VCR.
4 heads for superior slow motion and stop action
Playback of S-VHS tapes at better than standard resolution
Real time counter
Chapter One
YOUR NEW 3WAY COMBINATION UNIT
• DVD-ROM
• CD-ROM
• CDI
HD layer of super Audio CD
• CDGs play audio only, not graphics.
• CDV
Discs which cannot be played with this player
.
1.2 CHAPTER ONE: YOUR NEW 3WAY COMBINATION UNIT
Familiarizing Yourself with The 3way Combination Unit
Front Panel Buttons
The buttons on the front panel control your 3way Combination Unit’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.
YOUR NEW 3WAY COMBINATION UNIT
• CXM2785TP
• CXN2085TP
CHAPTER ONE: YOUR NEW 3WAY COMBINATION UNIT 1.3
YOUR NEW 3WAY COMBINATION UNIT
Œ
VIDEO IN jack
Used to connect a video signal from a camcorder or video game.
´
AUDIO IN jacks
Used to connect the audio signals from a cam­corder or video game.
Front/Side Panel Jacks
You can use the Front/Side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 – 2.6.)
Œ
Disc tray
Load the disc here.
´
VCR deck
Insert a standard VHS video tape.
ˇ
SKIP/SEARCH (DVD)
Press to skip or search the title, chapter or track.
¨
PLAY/P AUSE (DVD)
Press to play or pause the disc
ˆ
STOP (DVD)
Press to stop the disc
Ø
OPEN/CLOSE (DVD)
Press to open and close the disc tray.
STAND BY indicator
Lit when TV power is Off.
TIMER indicator
Lit when the program times are stored.
REC indicator
Lit when the VCR is recording.
˝
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Ô
REC (VCR)
Press to begin recording.
STOP/EJECT (VCR)
Press to stop a video tape during play, record, rewind, or fast forward. Press to eject a video tape if the tape is stopped.
Ò
REW/FF (VCR)
Press to rewind/fast forward a videotape.
Ú
PLAY/P AUSE (VCR)
Press to play or pause a video tape.
Æ
VOLUME – , +
Press to increase or decrease the volume.
ı
CHANNEL and
Press to change channels.
˜
POWER
Press to turn the TV on and off.
CXM2785TP
CXN2085TP
1.4 CHAPTER ONE: YOUR NEW 3WAY COMBINATION UNIT
YOUR NEW 3WAY COMBINATION UNIT
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected continu­ously, such as a VCR or a camcorder.
For more information on connecting equipment, see pages 2.1 – 2.6.
Œ
DIGITAL AUDIO OUTPUT
Connect to a compatible dolby digital receiver.
´
VIDEO-AUDIO INPUTS
Used to connect video-audio signals from VCRs, laserdisc players and similar devices.
ˇ
AUDIO-VIDEO MONITOR OUTPUTS
Connect to the audio-video input jacks of a recording VCR.
¨
VHF/UHF
Connect to an antenna or to a cable 3way Combination Unit system.
CHAPTER ONE: YOUR NEW 3WAY COMBINATION UNIT 1.5
YOUR NEW 3WAY COMBINATION UNIT
Remote Control (TV Function Buttons)
You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV.
Œ
POWER
Turns the 3way Combination Unit on and off.
´
+100
Press to select channels over 100. For example, to select channel 121, press “+100,” then press “2” and “1.”
ˇ
VOL +, VOL -
Press increase or decrease the volume.
¨
MUTE
Press to temporarily cut off the sound.
ˆ
S.STD
Adjust the TV sound by selecting one of the preset factory settings (or select your personal, customized sound settings).
Ø
P.STD
Adjust the TV picture by selecting one of the preset factory settings (or select your personal, cus­tomized picture settings).
MENU
Displays the main on-screen menu.
Control the cursor in the menu
Allows move to items.
TV/VCR DVD selection
Press to switch between TV/VCR, and DVD mode.
˝
PRE-CH
Tunes to the previous channel.
Ô
SLEEP
Press to select a preset time inter­val for automatic shutoff.
CH and CH (Channel Down/Up)
Press CH or CH to change channels.
Ò
INPUT
Press to watch the TV picture or a picture from a connected compo­nent (VCR, camcorder etc...)
Ú
MTS (Multichannel Television Stereo)
Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
Æ
DISPLAY
Press to see the channel, time, current disc mode, audio/video settings etc., on-screen.
ı
ADD/ERASE
Press to add or erase channels in the TVs memory.
1.6 CHAPTER ONE: YOUR NEW 3WAY COMBINATION UNIT
YOUR NEW 3WAY COMBINATION UNIT
Remote Control (DVD Function Buttons)
Œ
Search
Press to search forward/back­ward through a disc.
´
Stop
Press to stop a disc.
ˇ
DISC MENU
Press to display the disc menu.
¨
ENTER
Confirms a selection.
ˆ
OPEN/CLOSE
Press to open or close the disc tray.
Ø
STEP
Press to advance play one frame at a time.
ZOOM
Press to zoom-in during playback, slow motion or pause mode on the selected area of a scene.
ANGLE
Press to access various camera angles on a DVD.
PROGRAM
For random and program play.
˝
BOOKMARK
Press to memorize scenes for replay.
Ô
Play/pause
Press to play or pause disc play.
Skip
Press to skip the title, chapter, or track.
Ò
TOP MENU
Press to display the top menu on a DVD or CD/VCD disc.
Ú
RETURN
Press to return to a previous menu or exit.
Æ
SUBTITLE
Press to display the subtitle lan­guage name abbreviation on­screen.
ı
AUDIO
Press to access various audio functions on a disc.
˜
CLEAR
Press to clear on-screen displays.
¯
REPEAT
Press to repeat play a title, chap­ter, track, or disc.
˘
DVD SETUP
Displays the DVD plays Setup menu.
CHAPTER ONE: YOUR NEW 3WAY COMBINATION UNIT 1.7
YOUR NEW 3WAY COMBINATION UNIT
Remote Control (VCR Function Buttons)
Œ
REW/F.F
Press to rewind/fast forward a video tape.
´
Stop
Press to stop a video tape.
ˇ
TRK+, – (tracking)
Press to adjust tape tracking.
¨
OPEN/CLOSE
Press to eject a tape.
ˆ
SP/SLP
Press to select the tape recording speed.
Ø
P.PLUS
Press to compensate for a poor rental tape.
Play/pause
Press to play or pause a tape.
SLOW+, –
Press to watch a tape in slow motion.
REC
Press to begin recording.
˝
F.ADV
(frame advance)
Press to advance a tape frame­by-frame.
2.1 CHAPTER TWO: INSTALLATION
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads,” below.
If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 2.2.
If you have two antennas, see “Separate VHF and UHF Antennas,” on page 2.2.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or rabbit ears) that has 300-ohm twin flat leads, follow the directions below.
Chapter Two
INSTALLATION
1
Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not sup­plied). Use a screwdriver to tighten the screws.
2
Plug the adaptor into the VHF/UHF terminal on the bottom of the back panel.
2
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel.
CHAPTER TWO: INSTALLATION 2.2
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the incoming cable into the VHF/UHF antenna terminal on back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
2
Plug the combiner into the VHF/UHF terminal on the bottom of the rear panel.
INSTALLATION
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna leads to the combiner.
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is connected to the ANTENNA OUT terminal on your cable box.
This terminal might be labeled “ANT OUT,” “VHF OUT,” or simply, “OUT.”
2
Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.
2.3 CHAPTER TWO: INSTALLATION
INSTALLATION
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.
This terminal might be labeled
ANT IN,” “VHF IN,or simply,IN.
2
Connect this cable to a two-way splitter.
3
Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.
4
Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch.
continued...
CHAPTER TWO: INSTALLATION 2.4
INSTALLATION
5
Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
6
Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.
After youve made this connection, set the A/B switch to the “A” position for normal view­ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to B, you will need to tune your TV to the cable boxs output channel, which is usually channel 3 or 4.)
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
2
Connect a set of audio cables between the VIDEO/AUDIO OUT jacks on the TV and the VIDEO/AUDIO IN jacks on the VCR.
(The VCR input jacks might be either on the front or on back of the VCR.) If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable. Refer to your VCR’s instructions for more information about how to record using this kind of connection.
2.5 CHAPTER TWO: INSTALLATION
INSTALLATION
1
Locate the A/V output jacks on the camcorder. They are usually found on the side or rear of the camcorder.
2
Connect an video/audio cable between the VIDEO/AUDIO OUTPUT jack on the camcorder and the VIDEO/AUDIO terminals on theTV.
If you have mono camcorder, connect L(mono) to camcorder audio out using only one audio cable. The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electron­ics store.) If your camcorder is stereo, you need to connect a set of two cables.
Connecting a Camcorder
The front/side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or Camcorder Tape” on page 3.17)
Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.
CHAPTER TWO: INSTALLATION 2.6
INSTALLATION
Connect an optical cable between the DIGITAL AUDIO IN jacks on the AUDIO and the DIGITAL AUDIO OUT jack on the TV.
Connecting an Audio System (When playing a DVD)
The DIGITAL AUDIO OUT connector is used for equipment, such as an audio system (to take full advantage of the Surround sound effect).
Setting the Optical jack On/Off (Only DVD mode)
1
Press the MENU button. Press the UP/DOWN▲▼
buttons to select Sound”, then press the LEFT/RIGHT œ√ buttons.
2
Press the UP/DOWN▲▼ buttons to select Optical, then press the LEFT/RIGHT
œ√ buttons
to select On or Off”.
Press the MENU button to exit.
Note: The Optical On/Off function in the menu doesnt appear while a normal TV channel (RF channel) is being watched.
2.7 CHAPTER TWO: INSTALLATION
INSTALLATION
3
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the bat­teries last for about one year.)
2
Install two AA size batteries.
Make sure to match the + and
ends of the batteries with the
diagram inside the compartment.
Installing Batteries in the Remote Control
1
Slide the cover out completely.
C
HAPTER THREE:TV OPERATION
3.1
Viewing the Menus and On-Screen Displays
Viewing the Menus
1
With the power on, press the MENU button.
The main menu appears on the screen: Picture, Sound, Channel, Function and VCR setup.
The on-screen menus disappear from the screen after about thirty seconds.
You can also use the MENU,
CHANNEL, and VOLUME buttons
on the control panel of the TV to make selections.
2
Use the UP/DOWN▲▼ buttons to select one of the 5 items. Then press the LEFT/RIGHT
œœ
but­tons to access the item’s sub-menu.
3
Press the MENU button to exit.
Chapter Three
TV OPERATION
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front panel.
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
The on-screen displays
disappear after about ten seconds.
1
Press the DISPLAYbutton on the remote control.
The TV will display the channel, Time, disc mode, the status of certain pic­ture and sound settings, V-chip and the type of sound.
3.2 CHAPTER THREE: TV OPERATION
TV OPERATION
Selecting a Menu Language
3
Press the MENU button to exit.
2
Press the UP/DOWN▲▼ buttons to select “Language”. Press the LEFT/RIGHT
œœ
buttons to select the appropriate language: English, Spanish, or French.
1
Press the MENU button to display the menu.
Press the UP/DOWN▲▼ buttons to select “Function”. Press the LEFT/RIGHT
œœ
buttons.
C
HAPTER THREE:TV OPERATION
3.3
TV OPERATION
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change chan­nels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and delet­ing channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to display the menu.
Press the UP/DOWN▲▼ buttons to select “Channel”. Press the LEFT/RIGHT
œœ
buttons.
2
Press the UP/DOWN▲▼ buttons to select “ANT/CATV”.
Repeatedly press the LEFT/RIGHT
œœ
buttons to cycle through these choic­es: ANT (antenna), STD, HRC or IRC (all cable TV).
Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (next page).
3.4 CHAPTER THREE: TV OPERATION
3
Press the LEFT/RIGHT
œœ
buttons.
TV will begin memorizing all of the available chan­nels.
TV OPERATION
Storing Channels in Memory (Automatic Method)
The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.
Press the RIGHT
button at any time to interrupt the memorization process and return to the Channel menu.
2
Press the UP/DOWN▲▼ buttons to select “Auto Program”.
1
First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~2 on previous page.
Press the UP/DOWN▲▼ buttons to select “Channel”, then press the LEFT/RIGHT
œœ
buttons.
4
After all the available channels are stored, the Auto program menu disap­pears. Press the MENU button to exit.
C
HAPTER THREE:TV OPERATION
3.5
TV OPERATION
Adding and Erasing Channels (Manual Method)
You can view any channel (including an erased channel) by using the number buttons or UP/DOWN
▲▼ buttons on the
remote control.
3
Press the LEFT/RIGHT
œœ
buttons or the number buttons to select the channel you want to add or erase.
2
Press the UP/DOWN▲▼ buttons to select “Add/Erase”.
Press the LEFT/RIGHT
œœ
buttons.
1
Press the MENU button to display the menu.
Press the UP/DOWN▲▼ buttons to select “Channel”. Press the LEFT/RIGHT
œœ
buttons.
4
Press the UP/DOWN▲▼ buttons to select “Sel.”.
Press the LEFT/RIGHT
œœ
buttons to select “Added” or “Erased”.
Press the MENU button to exit.
3.6 CHAPTER THREE: TV OPERATION
Changing Channels
Using the Channel Buttons
Directly Accessing Channels
Use the number buttons to quickly tune to any channel.
Using the Pre-CH Button to select the Previous Channel
Press the CH or CH buttons to change chan­nels.
Press the number buttons to go directly to a channel. For example, to select channel 27, press “2,” then “7.” The TV will change channels when you press the second number.
Press the PRE.CH button. The TV will switch to the last channel viewed.
When you press the CH or CH buttons, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized.
To quickly switch between two chan­nels that are far apart, tune to one chan­nel, then use the number button to select the second channel. Then, use the Pre­CH button to quickly alternate between them.
When you use the number buttons, you can directly select channels that were either erased or not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press “+100,” then “2,” then “2.”)
To change to single-digit channels (0–9) faster, press “0” before the single digit. (For channel “4,” press “0,” then “4.”)
TV OPERATION
C
HAPTER THREE:TV OPERATION
3.7
Press the VOL + or VOL– but­tons to increase or decrease the volume.
TV OPERATION
Adjusting the Volume
Using Mute
At any time, you can temporarily cut off the sound using the Mute button.
1
Press the MUTE button and the sound cuts off.
The word “Mute” will appear in the lower-left corner of the screen.
2
To turn mute off, press the MUTE button again, or simply press either the VOL + or VOL– buttons.
3.8 CHAPTER THREE: TV OPERATION
TV OPERATION
1
Press the MENU button to display the menu.
Press the LEFT/RIGHT
œœ
buttons to display the Picture menu.
Customizing the Picture
You can use the on-screen menus to change the contrast, brightness, tint, color, and sharpness according to personal preference. (Alternatively, you can use one of the “automatic” settings. See next page.)
3
Press the UP/DOWN▲▼ buttons to select particu­lar item. Press the LEFT/RIGHT
œœ
buttons increase or decrease the value of a particular item.
2
Press the LEFT/RIGHT
œœ
buttons to select “Custom”.
Press the UP/DOWN▲▼ buttons to select “Adjust”, then press the LEFT/RIGHT
œœ
buttons.
After adjusting an item, the gauge will automatically disappear (after about 3 seconds).
4
Press the MENU button to exit.
C
HAPTER THREE:TV OPERATION
3.9
1
Press the MENU button to display the menu.
Press the LEFT/RIGHT
œœ
buttons to display the Picture menu.
2
Press the LEFT/RIGHT
œœ
buttons to select the “Dynamic,” “Stamdard,” “Movie,” or “Custom” pic­ture setting.
Press the MENU button to exit.
TV OPERATION
Using Automatic Picture Settings
Your TV has three automatic picture settings (“Dynamic”, “ Standard” and “Movie”) that are preset at the factory. You can activate either Dynamic, Standard, or Movie by press­ing P.STD (or by making a selection from the menu). Or, you can select “Custom” which automatically recalls your personalized picture settings.
Choose Dynamic for viewing the TV during the day or when there is brightlight in the room.
Choose Standard for the standard factory settings.
Choose Movie when viewing the movie.
Choose Custom if you want to adjust the settings accordings to personal prefer- ence (see “Customizing the Picture”, page 3.8).
Simply press the P.STD button on the remote con­trol to select one of the standard picture settings.
Alternate method:
3.10 CHAPTER THREE: TV OPERATION
TV OPERATION
1
Press the MENU button to display the menu.
Press the LEFT/RIGHT
œœ
buttons to display the Picture menu.
2
Press the UP/DOWN▲▼ buttons to select Color Tone.
Press the LEFT/RIGHT
œœ
buttons to select ”Cool 2”, ”Cool 1”, ”Normal”, “Warm 1” or “Warm 2” according to personal preference.
Changing the Color Tone
3
Press the MENU button to exit.
Loading...
+ 69 hidden pages