Samsung WS-32A2083Y, CW-29A2083 User Manual
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE
TELETEXT
WISE LINK
(OPTION)
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■ View of Your Television (depending on the model) ....................................... 5
■ Infrared Remote Control (depending on the model) ...................................... 7
■ Inserting the Batteries in the Remote Control................................................ 9
■ Connecting to an Aerial or Cable Television Network ................................... 9
■ Switching Your Television On and Off........................................................... 10
■ Placing Your Television in Standby Mode ..................................................... 10
■ Becoming Familiar with the Remote Control ................................................. 11
■ Plug & Play Feature....................................................................................... 12
■ Viewing the Demonstration............................................................................ 13
■ Choosing Your Language.............................................................................. 13
◆ SETTING THE CHANNELS
■ Storing Channels Automatically..................................................................... 14
■ Sorting the Stored Channels ......................................................................... 15
■ Storing Channels Manually............................................................................ 16
■ Skipping Unwanted Channels ....................................................................... 18
■ Assigning Names to Channels ...................................................................... 19
■ Fine Tuning Channel Reception.................................................................... 20
◆ USING YOUR TELEVISION
■ Using the LNA (Low Noise Amplifier) feature (depending on the model) ...... 21
■ Changing the Picture Standard ..................................................................... 21
■ Adjusting the Picture Settings........................................................................ 22
■ Selecting the Colour Tone ............................................................................. 23
■ Selecting the Picture Size (depending on the model).................................... 23
■ Extra Picture Settings .................................................................................... 24
■ Setting the Blue Screen................................................................................. 25
■ Using the Tilt Control Feature........................................................................ 25
■ Freezing the Current Picture ......................................................................... 26
■ Changing the Sound Standard ...................................................................... 26
■ Adjusting the Sound Settings ........................................................................ 27
■ Extra Sound Settings (depending on the model)........................................... 28
■ Selecting the Melody ..................................................................................... 29
■ Selecting the Sound Mode (depending on the model) .................................. 30
■ Setting and Displaying the Current Time....................................................... 31
■ Setting the Sleep Timer ................................................................................. 32
■ Switching the Television On and Off Automatically ....................................... 33
■ Setting the Preferred Volume Level/Channel ................................................ 34
■ Viewing an External Signal Source/Edit Name (depending on the model).... 35
■ Viewing the Picture In Picture (PIP) (depending on the model) .................... 36
English - 3
Contents (continued)
◆ USING THE WISE LINK (DEPENDING ON THE MODEL)
■ Using Wise Link (depending on the model)................................................... 38
■ Switching to WISE LINK Mode (depending on the model)............................ 40
■
Selecting Image (JPEG) Files/Music (MP3) Files (depending on the model)
■ Picture (JPEG) Playback (depending on the model) ..................................... 42
■ Rotating the Picture (JPEG) (depending on the model) ................................ 43
■ Picture Zoom (JPEG) (depending on the model) .......................................... 43
■ Music File (MP3) Playback (depending on the model) .................................. 44
■ Playback All JPEG/MP3 Files (depending on the model).............................. 45
■ WISE LINK Menu Setup (depending on the model)...................................... 46
◆ USING THE TELETEXT FEATURE
■ Teletext Feature ............................................................................................ 48
■ Displaying the Teletext Information ............................................................... 48
■ Selecting a Page by Number......................................................................... 49
■ Using FLOF to Select a Page........................................................................ 50
■ Storing Teletext Pages .................................................................................. 50
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■ Connecting to the External Input/Outputs...................................................... 51
■ Connecting to the Audio Output .................................................................... 51
■ Connecting to the RCA Input......................................................................... 52
■ Connecting to the S-Video Input.................................................................... 52
■ Viewing Pictures From External Sources ...................................................... 53
........... 41
◆ RECOMMENDATIONS FOR USE
■ Automatic Degaussing to Remove Colour Patches....................................... 53
■ Troubleshooting: Before Contacting Service Personnel................................ 54
Symbols
Press Important Note
English - 4
☛
➢
View of Your Television (depending on the model)
1
2
3
4567
11
810 9
1
2
3
4
5
6
7
The actual configuration on your TV may be different, depending on
➢
your model.
Control Panels
1) Standby Indicator
2) Remote Control Sensor
3) Power On/Off
4) Channel Selection
W.LINK Mode
8) Move Button
9) Select Button
Using the WISE LINK Buttons
➢
◆ Memory Card Slot: Insert the memory card into the slot.
◆ EXIT: Used to move to the previous page.
◆ ENTER: Used to execute the selected item.
◆ MOVE: Used to move between items.
You can use the Volume button on the remote control to control the volume
☛
while in Wise Link mode. (You cannot control the volume on the front
control panel of TV)
5) Volume Adjustment
6) Menu Display
7) Input Source Selection
10) Previous Button
11) Memory Card Slot
English - 5
View of Your Television (depending on the model) (continued)
Connection Panels
Side of the TV
Audio Input (R, L)
Video Input
S-Video Input
Rear of the TV
SCART Audio/
Video Input/Output
Monitor Audio Output
75Ω Coaxial Connector for Aerial/Cable Network
English - 6
Infrared Remote Control (depending on the model)
TELEVISION STAND-BY
PICTURE SIZE SELECTION
SOUND MODE SELECTION
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
MENU DISPLAY
MOVE TO THE REQUIRED
ADJUST AN OPTION VALUE
MENU OPTION/
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
AUTOMATIC SWITCH-OFF
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
INFORMATION DISPLAY
SETUP MENU DISPLAY(W.LINK)
(depending on the model)
EXIT FROM ANY DISPLAY
RETURN TO PREVIOUS MENU(W.LINK)
(depending on the model)
CHANGE CONFIRMATION
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
DNIe ON/OFF/DEMO
➢
W.LINK FUNCTION:
- ROTATE
- ZOOM
- REWIND
- STOP
- PLAY/PAUSE
- FASR FORWARD
- W.LINK: TOGGLES BETWEEN WISE
LINK AND TV MODE.
The performance of the remote control may be affected by bright light.
(depending on the model)
English - 7
Infrared Remote Control (depending on the model) (continued)
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
TELETEXT SIZE SELECTION
AND THE NORMAL BROADCAST
TELETEXT SUB-PAGE
TELETEXT PAGE HOLD
SUB PICTURE(PIP)
NEXT CHANNEL
PIP ON/OFF
PROGRAMME
SELECTION BY NAME
SUB PICTURE(PIP)
LOCATION SELECTION
TELETEXT STORE
TELETEXT NEXT PAGE
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT PREVIOUS PAGE
P
P
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
SUB PICTURE(PIP) SIZE SELECTION
SUB PICTURE(PIP) PREVIOUS
CHANNEL
FASTEXT TOPIC SELECTION
SUB PICTURE(PIP)
SOURCE SELECTION
English - 8
INTERCHANGE THE MAIN AND SUB
PICTURE (PIP)
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆-on the battery against -on the remote control
◆+on the battery against +on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically ” on page 14
◆ “Storing Channels Manually” on page 16
Rear of the TV
or
Cable Television
Network
English - 9
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
➢
and the frequency is 50 or 60Hz.
2
Press the “”button (On/Off) on the front of the television.
Result
: The Standby indicator on the front of the television
lights up.
3
Press the POWER ( ) button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture
➢
appears. Refer to “Storing Channels Automatically” on page
14 or “Storing Channels Manually” on page 16.
4
To switch your television off, press the “”button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result
: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER ()
button again.
You can also switch on by pressing the P or button.
➢
Do not leave your television in Standby mode for long
☛
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
English - 10
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next
stored channel.
Used to display the previous
stored channel.
to Used to display the corresponding channels.
-/--
PRE-CH Press the PRE-CH button. The TV will switch to the last
MUTE Used to switch the sound off temporarily.
Used to select a channel numbered ten or over.
Press this button, and the “
Enter the two-digit channel number.
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the
alternate between them.
Used to increase the
volume.
Used to decrease the
volume.
To turn the sound back on, press this button again, or
➢
press the or button.
-
-
--
” symbol is displayed.
PRE-CH button to quickly
-
-
MENU Used to display the Used to return to the previous
EXIT
TV Used to switch the Used to exit from the menu
on-screen menu system. menu or normal viewing.
-
-
-
television on when it is system and return to normal
in Standby mode. viewing directly
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
Used to confirm your choice.
Used to exit from the menu
system and return to normal
viewing directly.
English - 11
Plug & Play Feature
Plug & Play
TV
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ППЛУИО¿
Move Skip
Check antenna input.
œœ √√
Language
âe‰tina
Srpski
Hrvatski
Român™
Magyar
Polski
кЫТТНЛИ
Å˙΄‡ÒÍË
Türkçe
Move Skip
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result
: The message Plug & Play is displayed. It flickers for
a little while and then
Language menu is automatically
displayed.
2
Select the appropriate language by pressing the ▼ or ▲ button.
Press the
Result
➢
3
Make sure that the antenna is connected to the TV.
Press the
Result
MENU ( ) button to enter the language.
: The message Check antenna input. is displayed.
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
œ or √ button.
: The Auto Store menu is displayed with Country is
selected.
TV
Move
TV
Move
TV
Move
Auto Store
œœ
Country
Search : -/+
Clock -- : --
Sleep Timer : Off
On Timer -- : -- Off
Off Timer -- : -- Off
On Timer Volume : 0
On Timer Channel : P 1
Enjoy your watching.
Plug & Play
Language : English
Time
Blue Screen : Off
Melody : 0n
Demonstration
UK
œœ √√
Adjust Skip
Time
œœ √√
Adjust Skip
Setup
œœ √√
Enter Return
4
Select your country by pressing the œ or √ button. To search the
√√
channels, select
press the
Search by pressing the ▼ or ▲ button, and then
œ or √ button. Press the MENU ( ) button to stop the
search.
Result
: The Time menu is displayed with Clock is selected.
Refer to “Storing Channels Automatically” on page 14.
➢
5
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the
Refer to “Setting and Displaying the Current Time” on page
➢
31.
6
When you have finished, press the MENU ( ) button.
Result
: The message Enjoy your watching. is displayed,
▼ or ▲ button.
and then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1 Press the MENU ( ) button.
2 Press the ▼ or ▲ button to select Setup , and then press the
œ or √ button.
Result
: The Plug & Play is selected.
√√
√√
√√
3 Press the œ or √ button again.
Result
: This feature starts with the message Plug & Play
is displayed.
When you wish to exit from the Plug & Play, press
➢
the EXIT ( ) button on the remote control.
English - 12
Viewing the Demonstration
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Demonstration.
5
Press the œ or √ button.
Result
: Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the
➢
EXIT ( ) button on the remote control.
TV
Plug & Play
Language : English
Time
Blue Screen : Off
Melody : 0n
Demonstration
Move
Setup
œœ √√
Enter Return
√√
√√
√√
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Language.
5
Press the œ or √ button.
6
Select the appropriate language by pressing the ▼ or ▲ button
repeatedly.
TV
Plug & Play
LanguageœœEnglish
Time
Blue Screen : Off
Melody : 0n
Demonstration
Move
TV
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ППЛУИО¿
Move Return
Setup
œœ √√
Enter Return
Language
âe‰tina
Srpski
Hrvatski
Român™
Magyar
Polski
кЫТТНЛИ
Å˙΄‡ÒÍË
Türkçe
√√
√√
√√
√√
English - 13
TV
Auto Store
Manual Store
Add/Delete
Sort
Name
††
More
Move
TV
Move
TV
œœ √√
Enter Return
Auto Store
Country
Search : -/+
œœ √√
Adjust Return
Auto Store
Country : UK
Search
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
Channel
œœ
UK
œœ
-/+
√√
√√
√√
√√
√√
√√
√√
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
Result
: The Auto Store is selected.
4
Press the œ or √ button again.
Result
: The options available in the Auto Store group are
displayed with
5
Select your country by pressing the œ or √ button. The countries
are displayed in the following order:
Deutschland-España-France-Italia-Nederland
Schweiz-Sverige-UK-Eastren Europe
Country is selected.
Others-Belgie
-
-
Move
P 1 C-- ----106 MHz 7 %
Return
TV
Move
œœ √√
Search Return
Sort
œœ
From
To : P-- -----
Store : ?
P 1 -----
œœ √√
Adjust Return
6
Press the ▼ or ▲ button to select Search.
7
Press the œ or √ button to start the search.
Result
: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢ To stop the search before it has finished, press the MENU
( ) button.
8
When searching and storing are complete, the Sort menu is
displayed.
◆
To sort the stored channels into the desired numerical order,
go to Step
on page 15.
◆
To exit from the channel store function without sorting the
channels, press the
√√
9
menus disappear.
When the channels have been stored, you can:
◆
Sort them in the order required (refer to page 15)
◆
Clear a channel (refer to page 18)
◆
Assign a name to the stored channels (refer to page 19)
◆
Fine tune channel reception if necessary (refer to page 20)
◆
Activate the Digital Noise Reduction feature (refer to page 24)
6 of the “Sorting the Stored Channels” procedure
MENU ( ) button repeatedly until the
English - 14
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Sort.
5
Press the œ or √ button.
Result
: The options available in the Sort group are displayed
with
From is selected.
6
Select the channel number that you wish to change by pressing
the
œ or √ button repeatedly.
7
Press the ▼ or ▲ button to select To. Select the new channel
number which you wish to identify by pressing the
repeatedly.
You can also select the channel number directly by pressing
➢
the numeric buttons (0~9).
œ or √ button
TV
Auto Store
Manual Store
Add/Delete
Sort
Name
††
More
Move
TV
Move
TV
œœ √√
Enter Return
From
To : P-- -----
Store : ?
From : P 1 -----
To
Store : ?
œœ
œœ √√
Adjust Return
œœ
Channel
Sort
P 1 -----
Sort
P 3 -----
√√
√√
√√
√√
√√
√√
√√
8
Press the ▼ or ▲ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the
Result
:
The selected channel is exchanged with the one
œ or √ button.
previously stored to the chosen number.
9
For all the channels to move to the required channel numbers,
repeat steps
6 to 8 after selecting the From by pressing the ▼ or ▲
button.
Move
TV
Move
œœ √√
Adjust Return
From : P 3 -----
To : P 1 -----
Store
œœ
œœ √√
Adjust Return
Sort
OK
√√
English - 15
Storing Channels Manually
TV
Auto Store
Manual Store
Add/Delete
Sort
Name
††
Move
TV
Programme
Colour System : AUTO
Sound System : DK
Search : 0MHz
Channel : C--
Store : ?
Move
TV
Programme : P 1-----
Colour System
Sound System : DK
Search : 0MHz
Channel : C--
Store : ?
Move
TV
Programme : P 1-----
Colour System : AUTO
Sound System
Search : 0MHz
Channel : C--
Store : ?
Move
Channel
More
œœ √√
Enter Return
Manual Store
œœ √√
Adjust Return
Manual Store
œœ √√
Adjust Return
Manual Store
œœ √√
Adjust Return
œœ
P 1-----
œœ
œœ
AUTO
DK
You can store up to 100 television channels, including those
received via cable networks.
√√
√√
√√
√√
√√
√√
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Manual Store.
5
Press the œ or √ button.
Result
: The options available in the Manual Store group are
displayed with
√√
6
To assign a programme number to a channel, press the œ or √
Programme is selected.
button.
7
Press the ▼ or ▲ button to select Colour System. Indicate the
broadcasting standard required by pressing the
œ or √ button
repeatedly.
Result
: The colour standards are displayed in the following
order:
AUTO-PAL-SECAM-NT4.43.
8
Press the ▼ or ▲ button to select Sound System. Select the
√√
sound standard required by pressing the
Result
: The sound standards are displayed in the following
œ or √ button repeatedly.
order:
BG-DK-I-L.
English - 16
Storing Channels Manually (continued)
9
If you know the number of the channel to be stored, see the
following steps.
◆
Press the ▼ or ▲ button to select Channel.
◆
Press the √ button.
◆
Press the ▼ or ▲ button to select C (Air channel) or S (Cable
channel).
◆
Press the √ button.
◆
Press the ▼ or ▲ button to select indicate the required
number.
You can also select the channel number directly by
➢
pressing the numeric buttons (0~9).
If no sound or abnormal sound, re-select the sound standard
➢
required.
10
If you do not know the channel numbers, select Search by
pressing the
search.
Result
11
To store the channel and associated programme number, select
Store by pressing the ▼ or ▲ button. Press the œ or √ button to
select
12
Repeat Steps 9 to 11 for each channel to be stored.
▼ or ▲ button. Press the œ or √ button to start the
: The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
OK.
TV
Adjust
TV
Move
TV
Move
Manual Store
Programme : P 1-----
Colour System : AUTO
Sound System : DK
Search : 0MHz
Channel
Store : ?
œœ √√
Move Return
Manual Store
Programme : P 1-----
Colour System : AUTO
Sound System : DK
Search
Channel : C 1
Store : ?
œœ √√
Search Return
Manual Store
Programme : P 1-----
Colour System : AUTO
Sound System : DK
Search : 46MHz
Channel : C 1
Store
œœ √√
Adjust Return
œœ
œœ
œœ
C 1
46MHz
OK
√√
√√
√√
Channel mode
☛
◆ P (Programme mode):
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode):
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode):
entering the assigned number for each cable channel in this
mode.
When completing tuning, the
You can select a channel by
You can select a channel by
English - 17
Loading...