Samsung CW-25M064N User Manual

COLOUR TELEVISION

Owner’s Instructions

Before operating, please read this manual thoroughly,

Control Panel

➢

and retain it for future reference.

Register your product at

www.samsung.com/global/register

(depending on the model)

The actual configuration of your TV may be different,
depending on your model.

Front (or Side) Panel

Connection Panel

The actual configuration of your TV may be different,

➢

depending on your model.

Rear Panel

or

(depending on the model)

or

cable television network

Front (or Side) Panel

Headphone jack

Audio input

Video input

S-Video input

ΠOn-screen menu display
´ Volume adjustment
ˇ Channel selection
¨ Remote control sensor
ˆ Indicator
Ø Power on/off

◆ You can use the ˇ buttons to switch the TV on when it is

in standby mode depending on the model.

◆ The ´ and ˇ buttons also have the same function as the
œ/√/†/… buttons on the remote control.

◆ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.

Whenever you connect an audio or video system to your

☛

television, ensure that all elements are switched off.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the Œ (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.

Connecting to the SCART Input/Output

The SCART´ and SCARTˇ connectors are used for
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART´ is also used for equipment with an RGB
output, such as a video game device or video disc player.

English - 1

Please be sure to match the colour coded input

☛

terminals and cable jacks.

Connecting to the RCA Input

The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.

Connecting to the S-VIDEO Input

The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used
for equipment with an S-Video output, such as a camcorder
or VCR.

Connecting Headphones

The ¨ (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.

When both the front (or side) AV and rear connectors

➢

are connected to external equipment, the front (or
side) AV receives priority.

AA68-03621A-01

Remote Control

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

(depending on the model)

∏∏

MENU

Used to display the on­screen menu or return to
the previous menu.

”” …… / †† / œœ / √√

Used to control the
cursor in the menu.

’’

P.SIZE

Used to change the
screen size.

˝˝

DUAL I-II

Used to select the
sound mode.

ÔÔ

TURBO

Used to select the turbo
sound option.



S.MENU

Used to display the
sound menu.

ÒÒ

PRE-CH

Used to switch
repeatedly between the
last two channels
displayed.

ÚÚ

SOURCE

Used to display all of the
available video sources.

ÆÆ

P/

Used to display the next
or previous stored
channel.

ıı

INFO

Used to view the
channel information and
setting status you
selected.

˜˜

EXIT

Used to exit from any
display or return to
normal viewing.

¯¯

ENTER

While using the on­screen menus, press the
ENTER button to
activate (or change) a
particular item.

˘˘

SLEEP

Used to select a preset
time interval for
automatic turn off.

¿¿

P. MODE

Used to select the
picture effect.

¸¸

S.MODE

Used to select the
sound effect.

Switching the Television On and Off

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the

➢

television and the frequency is 50 or 60Hz.

2 Press the button (On/Off) on the front (or side) of the

television.

3 Press the POWER button on the remote control to

switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” or “Channel - Manual
Store” on page 4.

If the television is initially powered on, several basic

➢

customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.

4 To switch the television off, press the button (On/Off)

on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).

ŒŒ

POWER

Used to switch the TV
on and off.

´´

Numeric buttons

Used to select channels
directly.

ˇˇ

-/--

Used to select a channel
numbered ten or over.
Press this button, then
“--” symbol is
displayed. Enter the
two-digit channel
number.

¨¨

MUTE

Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or

button.

ˆˆ

ØØ

/

Used to increase or
decrease the volume.

TV

Used to return to the TV
mode when it is in
external input mode.

Installing Batteries

Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+” and “-” ends of the
batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 2

1 Press the POWER button on the remote control while

viewing.
The television is in standby mode.

2 To switch the television back on, simply press it again.

Do not leave the television in standby mode for long

☛

periods of time (when you are away on holiday, for
example). Turn the television off by pressing the
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.

2 Press the … or † button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the … or † button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the …/†/œ/√ button to change the selected

items. Press the MENU button to return to the previous
menu.

5 Press the EXIT button to exit from the menu.

Setup - Plug & Play

When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.

1 If the television is in standby

mode, press the POWER
button on the remote
control.
The Start Plug & Play
is displayed. To start Plug &
Play, press the ENTER
button. The Language
menu is displayed.

The Language menu

➢

will automatically
appear after several
seconds, even if the ENTER button is not pressed.

Plug & Play

Start Plug & Play

OK

Enter Exit

Plug & Play

Language

English

Deutsch
Français
Nederland
Español
Italiano

Move Enter Skip

Svenska
Português

∂ППЛУИО¿

âe‰tina

Srpski

††

2 Select the appropriated language by pressing the … or

† button. Press the ENTER button.

The Check antenna
input. is displayed.

If any language is not

➢

selected, the language
menu will disappear

Plug & Play

Check antenna input.

OK

Enter Skip

about 30 seconds later.

3 Make sure that the antenna

is connected to the
television (refer to page 1).
Press the ENTER button.
The Country menu is
displayed.

4 Press the … or † button to

select your country. Press
the ENTER button.

5 To search the channels,

press the ENTER button. To
stop the search, press the
ENTER button.
When the channel
searching has finished, the
Clock Set menu is
displayed.

6 Press the œ or √ button to

move to the hour or minute.
Set the hour or minute by
pressing the … or † button.

7 When you have finished,

press the MENU button.
The Enjoy your

Plug & Play

Country

Belgie

Deutschland
España
France
Italia
Nederland

Move Enter Skip

Auto Store

Enter Skip

Auto Store

P 1 C-- ----- 102MHz

Enter Skip

Clock Set --:--

Move Enter
Adjust Skip

Enjoy your viewing.

Schweiz
Sverige
UK
E. Europe
Others

Plug & Play

Start

Plug & Play

Stop

Plug & Play

OK

viewing. is displayed, and then the channel which has

been stored will be activated.

Re-setting the Plug & Play

Method: MENU ➜……/
(Setup) ➜ ENTER ➜……/

††

††

(Plug & Play) ➜ ENTER

Input

(depending on the model)

TV

Plug & Play

Language : English
Time
Child Lock
Blue Screen : Off
Melody : On
Demonstration

Move Enter Return

-

Setup

√√

√√
√√
√√
√√
√√
√√

Source List / Edit Name

%

7

◆ Source List

You can switch between
viewing signal from
connected equipment, such

TV

TV

EXT1 ---­EXT2 ---­S-Video ----

as a VCR, DVD, set-top box,
and the TV source
(broadcast or cable).

You can change the required external source simply

➢

by pressing the SOURCE button on the remote

Move Enter Return

control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.

◆ Edit Name

You can give a name to the
external source.

TV

EXT1 : ----
EXT2 : ----
S-Video : ----

Move Enter Return

Source List

Edit Name

----

VCR
DVD
Cable STB
Sat. STB
AV Receiver
DVD Receiver

††

continued...

English - 3