Samsung CL2Z58, CL2AE0, CL2Z47, CT21A750, CL2Z50 User Manual

...

COLOR TELEVISION

CL21Z43/21Z45/21Z47/21Z50/21AM0 21Z57/21Z58/21A750/21AE0/21AF0 CT21Z43/21Z45/21Z47/21Z50/21AM0 21Z57/21Z58/21A750/21AE0/21AF0
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.

Connection Panel (depending on the model)

The product color and shape may vary depending on the
model.
Rear Jack
1
2
3
3
4
Front (or Side) Panel
1
2 3
1
2
Register your product at www.samsung.com/global/register.
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

The product colour and shape may vary depending on the
model.
Front (or Side) Panel
1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Standby indicator 6 Power on/off
You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
The 2 and 3 buttons also have the same function as the
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the television.
1
2
1 2
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off. Please be sure to match the color coded input terminals
and cable jacks.
1 Audio/Video Output Jacks
Connect to the audio/video input jacks of a recording VCR.
2 Audio/Video Input Jacks
Connect to the and similar devic
3 Component Video Input Jacks (Y, PB, PR)
Connect to the Co set-top box. 480i video signal input is available.
When using the Component Video input, connect audio jacks
to “AV IN 2 (AUDIO-L/R)”.
4 ANT IN
Connect to an antenna or to a cable TV system.
audio/video output jacks of VCRs, DVD players
es.
mponent video outputs of a DVD or DTV
4
4
1
2
3
1 Audio input 2 Video inpout 3 Headphone jack
Please be sure to match the colour coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.
Connecting to the Headphones
The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing.
When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
1
2 3
1
2
English - 1
AA68-03992B-00

Remote Control (depending on the model)

Turning the TV On and Off

Operation of remote control may be affected by bright
artificial light near to the TV.
This is a special remote control for the visually impaired,
and has Braille points on the POWER, Channel and
Volume buttons.
1 POWER
Turns the TV on and off.
2 Number buttons
Press to select channels directly on the TV.
3
Press to select channels over 100. For example,
for channel 122, press “-”, then “2”, then “2”.
4 VOL +, VOL -
Press to increase or decrease the volume.
5 MENU
Displays the main
on-screen menu.
6 ▲/▼/◄/►
Controls the cursor in the menu.
7 ENTER
While using the on-screen menus, press ENTER to activate
(or change) a particular
item.
8 P.MODE
Used to select the
picture effect.
9 MTS
(Multi-channel Television Sound)
Press to choose "Stereo" or "Mono".
0 R.SURF
Press to automatically return to a preferred channel after a userpreset time delay.
! SOURCE
Press to display all of the available video sources.
@ INFO
Press to display information on the TV screen.
# PRE-CH
Tunes to the previous channel.
$ CH , CH
Press to change channels.
% EXIT
Press to exit the menu.
^ MUTE
Press to temporarily cut off the sound.
& SLEEP
Press to select a preset time interval for automatic shut off.
Press the POWER button on the remote control. You can also use the
Caution: One pole switch is totally not off(one line still live)
if power cord is not unplugged.
POWER button on the TV.

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side has five icons:
and “Setup”.
2 Press the ▲ or ▼ button to select one of the icons.
Press the
3 Press the ▲ or ▼ button to move to items in the menu.
Press the
4 Press the ▲/▼/◄/► button to change the selected items.
Press the
5 Press the EXIT button to exit from the menu.
“Input”, “Picture”, “Sound”, “Channel”,
ENTER button to access the icon’s sub-menu.
ENTER button to enter items in the menu.
MENU button to return to the previous menu.
Installing Batteries
Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate
normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline
and manganese.
English - 2
English - 3

Setup - Plug & Play (depending on the model)

Input - Source List (depending on the model)

When the TV is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
1 Press the POWER button on
the remote control.
The “Start Plug & Play.” is
displayed. Press the
ENTER
button, then the “Check
antenna input.” is displayed.
2 Press the ▲ or ▼ button to
select the language, then press the
ENTER button. The
message “Check antenna
input” is displayed.
Plug & Play
Start Plug & Play.
Enter Exit
Plug & Play
Language
English
Español Português Français
Move
OK
Enter
Skip
3 Make sure that the antenna
is connected to the TV. Press the
ENTER button,
then the “Auto Program” is
displayed.
4 Press the ENTER button
to start. The TV begins memorizing all available channels. Press the
ENTER
button to stop.
Plug & Play
Check antenna input.
OK
Enter Skip
Plug & Play
Auto Program Air 3
Stop
Enter Skip
3%
5 After all available channels
are stored, the “Clock Set”
is displayed.
Press the ◄ or ► button to
move to the hour or minute. Set the clock by pressing
Plug & Play
Clock Set 12 : 00 am
Move Enter
Adjust Skip
the ▲ or ▼ button.
6 When you have finished,
press the
The “Enjoy your watching.”
is displayed.
MENU button.
Enjoy your watching.
OK
Plug & Play feature
only work in the TV mode.
Re-setting the Plug & Play
Method: MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play) ENTER
Enter
Setup
Return
Plug & Play
Language : English ► Time ► Caption : Off ► Child Lock ► Blue Screen : On
Move
Source List
You can switch between viewing signal from connected equipment, such
TV
AV1 AV2 Component
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
Press the SOURCE
button on the remote control repeatedly to select the
Move
desired signal source.
Enter
Source List
Return
continued...
Loading...
+ 5 hidden pages