Samsung CSE 9839L Owner's Instructions Manual
CSE 9839L
Color Monitor
Owner’s
Instructions
CS9839-E 10/8/98 10:51 AM Page i
ii
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and servicing instructions in the literature
accompanying the appliance.
Unpacking your Monitor
Please make sure the following items are included with
your computer monitor:
Monitor and Stand
Power Cable
This Manual
Warranty Card
(Not available in all
areas)
Signal Cable
CS9839-E 10/8/98 10:51 AM Page ii
1
Table of Contents
Preface: Safety Information . . . . . . . . . .2
Chapter One: Overview of Your
Monitor . . . . . . . . . . . . . . . . . . . . . . . . .3
Front Panel.....................................................................................3
Rear Panel......................................................................................4
Chapter Two: Installation . . . . . . . . . . . . .5
Connecting Your Monitor to a Computer ..................................5
Chapter Three: Adjusting Your Monitor . .6
Overview........................................................................................6
Brightness......................................................................................6
Contrast..........................................................................................6
Direct Access Features...............................................................7
Position....................................................................................7
Size...........................................................................................7
Pincushion/Trapezoid............................................................7
Parallel/Rotation....................................................................8
Menu Features..............................................................................8
Color temperature .................................................................8
Color Control...........................................................................9
Degauss...................................................................................9
Recall.......................................................................................9
Menu Position......................................................................10
Menu Duration.....................................................................10
D-SUB / BNC ........................................................................11
Pinbalance............................................................................11
Clear Moire...........................................................................11
Language ..............................................................................12
Display Timing......................................................................12
Video Input Level.................................................................12
Sync. Input Type...................................................................13
Exit..........................................................................................13
PowerSaver.................................................................................14
Troubleshooting ..........................................................................15
A p p e n d i x . . . . . . . . . . . . . . . . . . . . . . . . .1 6
Specifications..............................................................................16
Pin Assignments.........................................................................17
Display Modes Timing Chart.....................................................18
CS9839-E 10/8/98 10:52 AM Page 1
Preface: Safety Information
2
Please read and follow these instructions when connecting and using your
computer monitor.
1
Before connecting the AC power
cord to an outlet, make sure the
voltage designation on your monitor corresponds to the local electrical supply.
2
Never insert anything metallic into
the monitor openings. Doing so
may create the danger of electric
shock.
3
To avoid electric shock, never
touch the inside of the monitor.
Only a qualified technician should
open the monitor’s case.
4
Never use your monitor if the
power cord has been damaged.
Do not allow anything to rest on
the power cord, and keep the cord
away from where people could
trip over it.
5
Be sure to hold the plug, not the
cord, when disconnecting the
monitor from an electric socket.
6
Openings in the monitor cabinet
are provided for ventilation. To
prevent overheating, these openings should not be blocked or covered. Also, avoid using the monitor
on a bed, sofa, rug, or other soft
surface. Doing so may block the
ventilation openings in the bottom
of the cabinet. If you put the monitor in a bookcase or some other
enclosed space, be sure to provide adequate ventilation.
7
Put your monitor in a location with
low humidity and a minimum of
dust. Avoid places like damp
basements or dusty hallways.
8
Do not expose the monitor to rain
or use it near water (in kitchens,
next to swimming pools, etc.). If
the monitor accidentally gets wet,
unplug it and contact an authorized dealer immediately. You can
clean the monitor with a damp
cloth when necessary, but be sure
to unplug the monitor first.
9
Place the monitor on a solid surface and treat it carefully. The
screen is made of glass and can
be damaged if dropped or sharply
hit.
10
Locate your monitor near an easily
accessible AC outlet.
11
If your monitor does not operate
normally – in particular, if there
are any unusual sounds or smells
coming from it – unplug it immediately and contact an authorized
dealer or service center.
12
High temperatures can cause
problems. Don’t use your monitor
in direct sunlight, and keep it away
from heaters, stoves, fireplaces,
and other sources of heat.
13
Unplug the monitor when it is
going to be left unused for an
extended period of time.
14
Unplug your monitor from the AC
outlet before any service.
CS9839-E 10/8/98 10:52 AM Page 2
Chapter One: Overview of Your Monitor
3
Front Panel
1
, button
Use this button to adjust the position or size.
2
, button
Use this button to adjust the pincushion/trapezoid
or parallel/rotation.
3
▲ ,▼ ,$ , % buttons
Use these buttons to choose or adjust items in the
on-screen display.
4
, MENU button
Use this button to activate the on-screen display, to
enter a selection in the on-screen display, or to exit
the on-screen displays.
5
Power indicator
This light glows green during normal operation, and
blinks amber once as your adjustments are saved.
6
Power button
Use this button to turn the monitor on and off.
1 2 3 4
5 6
CS9839-E 10/8/98 10:52 AM Page 3
4
Chapter One: Overview of Your Monitor
Rear Panel
1
Power port
Connect the power cable here.
2
Signal port
Connect your signal cable here.
3
BNC signal port
Connect a BNC signal cable here. (BNC signal
cable not included)
3
1
2
CS9839-E 10/8/98 10:52 AM Page 4
5
Chapter Two: Installation
Connecting Your Monitor
to a Computer
1
Turn off your computer and unplug
its power cord.
2
Connect the signal cable to the
D-SUB or BNC signal port on the
back of your monitor.
3
If you are using a Macintosh computer, connect the other end of the
signal cable to a Macintosh
adapter. (The adapter is not included with your monitor. Contact your
dealer for more information.) If you
are using an IBM-compatible computer, skip to step 5.
4
Follow the instructions included
with your adapter to set the pins
on your adapter, if necessary.
5
Connect the signal cable (with the
adapter if necessary) to the video
port on the back of your computer.
This port might be directly
attached to your computer, or it
might be part of a video board,
video card, or graphics card.
6
Connect the power cord for your
monitor to the power port on the
back of the monitor.
7
Plug the power cords of your computer and your monitor into a nearby outlet.
8
Turn on your computer and monitor. If your monitor displays an
image, installation is complete.
Note: You can download the monitor
driver from the internet at
http://www.sec.samsung.co.kr (Enter)
Select Support => File download =>
Monitor => your Monitor name.
For directions on completing the monitor
configuration process, click on install.txt
(Windows 95 driver installation guide).
2
6
7
3
5
CS9839-E 10/8/98 10:52 AM Page 5
Loading...