Samsung CS3343T/HAC, CS53600TS/HAC, CS53100TS, CS3344T/HAC, CS3343 User Manual

...
COLOUR TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ENG
ON-SCREEN MENUS
ENJOY GAME
(depending on the model)
TELETEXT FUNCTION
(depending on the model)
01602B_ENG_GAME 3/12/02 5:01 PM Page 1
2
ENG
Safety Instructions
The following illustrations represent the precautions to be taken when using and moving your television.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Caution
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION
Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%).
Do NOT expose the television to direct sunlight.
Do NOT expose the television to any liquids.
If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.
If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.
Mode System
CS PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
NTSC4.43 (NTSC3.58; option) CB PAL-B/G CD PAL-D/K
WARNING: TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.
The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.
The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
!
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
01602B_ENG_GAME 3/12/02 5:01 PM Page 2
10%
H
5°
75%
35°
H
3
ENG
Contents
PREPARING YOUR TELEVISION
Safety Instructions......................................................................................... 2
Caution.......................................................................................................... 2
Front Panel Controls...................................................................................... 4
Using the Buttons on the Front Panel............................................................ 4
Connection Panels ........................................................................................ 5
Infrared Remote Control (All Functions Except Teletext).............................. 6
Infrared Remote Control (Teletext Functions)............................................... 7
Inserting the Batteries in the Remote Control................................................ 8
Connecting the Aerial (or Cable Television Network).................................... 8
Switching Your Television On and Off........................................................... 9
Placing Your Television in Standby mode..................................................... 9
Plug & Play Feature....................................................................................... 10
Choosing Your Language.............................................................................. 11
SETTING UP THE CHANNELS
Storing the Channels Automatically............................................................... 12
Selecting a Channel Numbered Ten or Over ................................................ 12
Storing the Channels Manually...................................................................... 13
Skipping Unwanted Channels ....................................................................... 14
Fine tuning Channel Reception..................................................................... 15
Sorting the Stored Channels ......................................................................... 16
USING THE TELEVISION
Changing the Picture Standard ..................................................................... 17
Selecting the Picture Format......................................................................... 17
Adjusting the Picture Settings ....................................................................... 18
Changing the Sound Standard...................................................................... 19
Adjusting the Sound Settings ........................................................................ 20
Adjusting the Volume..................................................................................... 20
Extra Sound Settings
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) .................................... 21
Selecting the Sound Mode ............................................................................ 22
Switching the Sound Off Temporarily............................................................ 22
Setting the Sleep Timer................................................................................. 23
Setting and Displaying the Current Time....................................................... 23
Switching the Television On and Off Automatically....................................... 24
Activating the Child Lock............................................................................... 25
Extra Function Settings (Blue Screen/Low Noise AMP)................................ 26
Enjoying Games (depending on the model).................................................. 27
USING THE TELETEXT FUNCTION (depending on the model)
Teletext Decoder........................................................................................... 28
Displaying Teletext Information..................................................................... 28
Selecting a Specific Teletext Page................................................................ 29
Using FLOF to Select a Teletext Page.......................................................... 30
Storing Teletext Pages.................................................................................. 30
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
Viewing Picture From External Sources........................................................ 31
Connecting to the Audio/Video Input/Outputs ............................................... 32
Automatic Degaussing to Remove Color Patches......................................... 33
Troubleshooting: Before Contacting Service Personnel................................ 33
Symbols
Press Important Note
01602B_ENG_GAME 3/12/02 5:01 PM Page 3
4
ENG
Front P anel Contr ols(depending on the model)
Buttons and markings are subject to change.
MENU DISPLAY
VOLUME ADJUSTMENT
CHANNEL SELECTION
POWER
STAND-BY INDICATOR
REMOTE CONTROL SENSOR
Using the Buttons on the F ront Panel
If your remote control no longer works or you have lost it, you can use the controls on the front panel of the television to:
Switch on the television when it is in Standby mode and
select channels
( ▼ CH ▲ )
Access the main menu ( MENU )
Adjust the volume ( -VOL + )
Buttons on the front panel have the same function as corresponding buttons on the remote control.
MENU DISPLAY
VOLUME ADJUSTMENT
CHANNEL SELECTION
STAND-BY
INDICATOR
REMOTE CONTROL SENSOR
01602B_ENG_GAME 3/12/02 5:01 PM Page 4
5
ENG
Connection Panels
The actual configuration on your TV may be different, depending on your model.
Rear of TV
A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR B) 75COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK C) RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
OUTPUT
INPUT
VIDEO AUDIO
OUTPUT
INPUT
VIDEO AUDIO
RCA AUDIO/VIDEO INPUT
CONNECTORS
Front (or Side) of TV
Connecting earphones ( ) /headphones ( )
You can connect a set of earphones/headphones to your television if you wish to watch a television programme without disturbing the other people in the room.
Prolonged use of earphones/headphones at a high volume may damage your hearing.
INPUT
MONITOR
-OUT
VIDEO AUDIO
INPUT
MONITOR
-OUT
VIDEO
(
MONO
)
L-AUDIO-R
B
A
C
C
B
C
B
C
B
B
01602B_ENG_GAME 3/12/02 5:01 PM Page 5
6
ENG
Infrared Remote Control (All Functions Ex cept Teletext)
Operation of remote control may be affected by bright artificial light near to the TV set.
POWER
SOUND MENU DISPLAY
(OPTION)
ONE/TWO-DIGIT CHANNEL
SELECTION
TURBO SOUND ON/OFF
(OPTION)
TEMPORARY SOUND SWITCH-
OFF
VOLUME DECREASE
PREVIOUS CHANNEL
DIRECT CHANNEL SELECTION
TUNER/CABLE NETWORK SELECTION
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
AUTOMATIC SWITCH-OFF
PICTURE SIZE NEXT CHANNEL
VOLUME INCREASE
PICTURE STANDARD (OPTION)
SOUND STANDARD (OPTION)
SOUND MODE SELECTION (OPTION)
MENU DISPLAY
Buttons and markings are subject to change.
GAME DISPLAY (OPTION)
01602B_ENG_GAME 3/12/02 5:01 PM Page 6
7
ENG
Infrared Remote Control (Teletext Functions)
TELETEXT HOLD
FASTEXT TOPIC SELECTION
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/MIX
LIST/FLOF MODE SELECTION
TELETEXT REVEAL
TELETEXT STORE
PICTURE SIZE
TELETEXT SUB-PAGE
PROGRAMME SELECTION BY NAME
Buttons and markings are subject to change.
01602B_ENG_GAME 3/12/02 5:01 PM Page 7
?
1
1
8
ENG
You must insert or replace the batteries in the remote control when you :
Purchase the television.
Find that the remote control is no longer operating
correctly.
1 Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
+ on the battery with +on the remote control
◆-on the battery with -on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial
A cable television network
Plug the aerial or cable network input cable to the 75coaxial socket on the rear of the television.
Inserting the Batteries in the Remote Control
Connecting the Aerial (or Cable Television Netw ork)
Cable Television Network
Rear of TV
01602B_ENG_GAME 3/12/02 5:01 PM Page 8
S
S
E
R
P
PRESS
S
S
E
R
P
75
9
ENG
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.
2 Press the “” (ON/OFF) button on the front of the television.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER button on the remote control to switch the
television on. Result
: The programme that you were watching last is re-
selected automatically.
4 To switch your television off, press the “” (ON/OFF) button
again on the front of the television.
Placing Your Tele vision in Standb y mode
Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you turn it on.
1 Press the POWER button on the remote control.
Result:
The screen is turned off and the Standby indicator on the front of the television lights up.
2 To switch the screen back on, simply press the POWER button
again on the remote control.
Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.
Switc hing Your Television On and Of f
01602B_ENG_GAME 3/12/02 5:01 PM Page 9
10
ENG
Plug & Play Feature
When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
1 If the television is in Standby mode, press the POWER button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the Language menu is automatically displayed.
2 Press the or button to select required language. Press the
MENU button to enter the language, and then the message Ant.
Input Check is displayed.
If any language is not selected on the Language menu, theLanguage menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press
the + or – button to store the channels (refer to Storing the Channels Automatically on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the frequency range.
4 When searching and storing is complete, the “Time menu is
displayed.
5 Press the +or button to move to the hour or minute. Set the hour
or minute by pressing the ▲ or ▼ button (refer to Setting and Displaying the Current Time on page 23).
6 When you have finished, press the MENUbutton.
Result: The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be activated.
7 If you want to reset this feature...
1 Press the MENU button.
2 Press the or button to select the Function, and then
press the + or – button.
3 Select the “Plug & Play by pressing the ▲ or button, and
then press the
+ or button.
Result:
The message Plug & Play is displayed.
ENJOY YOUR WATCHING
Time Clock - - : - - AM
01602B_ENG_GAME 3/12/02 5:01 PM Page 10
Plug & Play
Ant. Input Check
Auto Store Exit
P 1 471 MHz 48 %
Exit
Time Clock 11 : 35
Move Exit
Enjoy Your Watching...
Language : English Time
Plug & Play
Blue Screen : Off Child Lock Low Noise AMP : Off
Select Enter Exit
Function
11
ENG
Choosing Your Language
When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.
1 Press the MENUbutton. 2 Press the or button to select the Function”. 3 Press the +or – button to select the Language”. 4 Select a particular language by pressing the ▲ or ▼ button
repeatedly.
5 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
01602B_ENG_GAME 3/12/02 5:01 PM Page 11
Picture
Mode Custom Adjust Size : Normal
Select Enter Exit
Function
Language : English Time Plug & Play Blue Screen : Off Child Lock Low Noise AMP : Off
Select Enter Exit
Function
Language : English
Time Plug & Play Blue Screen : Off Child Lock Low Noise AMP : Off
Select Adjust Exit
Loading...
+ 25 hidden pages