Samsung CS-29Z45MH, CS-29Z50MH, CS-29Z40MH, CS-29Z57MV, CS-21M40ML User Manual

...

COLOR TELEVISION

CS-29Z40/29Z45/29Z50/29Z57/29Z58

29U50/29U57

Owner’s Instructions

Before operating, please read this manual thoroughly,

Control Panel

➢

and retain it for future reference.

www.samsung.com/global/register

(depending on the model)

The actual configuration of your TV may be different, depending on your model.

Front (or Side) Panel

Connection Panel

The actual configuration of your TV may be different,

➢

depending on your model.

Rear Panel

(depending on the model)

cable television network

Connecting to the RCA Output

The RCA66connectors are used for equipment, such as a recording VCR or audio system.

Connecting to the RCA

The RCA4 and RCA5 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.)

The RCA77connectors are used for equipment such as a DVD with component output.

Front (or Side) Panel

Input

3 S-Video input

2 Video input

1 Remote control sensor 2 Standby indicator 3 Power on/off 4 On-screen menu display 5 Volume adjustment 6 Channel selection

◆ You can use the 6 buttons to switch the TV on when it is

in standby mode depending on the model.

◆ The 5 and 6 buttons also have the same function as the

œ/√/†/… buttons on the remote control.

◆ If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.

Whenever you connect an audio or video system to your

☛

television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1 (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

Connecting to the SCART Input/Output

The SCART2 and SCART3 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART2 is also used for equipment with an RGB output, such as a video game device or video disc player.

continued...

English - 1

1 Audio input

Please be sure to match the color coded input terminals

☛

and cable jacks.

Connecting to the RCA Input

The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

Connecting to the S-VIDEO Input

The 3 (S-VIDEO IN) and 1 (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.

AA68-03867A-06

Remote Control

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

POWER

Used to switch the TV on and off.

Numeric buttons

Used to select channels directly.

(depending on the model)

-/--

Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “-” ends of the batteries are inserted correctly or the batteries are drained.

➢

Used to increase or decrease the volume.

Used to display the onscreen menu or return to the previous menu.

…… / †† / œœ / √√

Used to control the cursor in the menu.

S.MENU

Used to display the sound menu.

TURBO

Used to select the turbo sound option.

P.SIZE

Used to change the screen size.

DUAL I-II

Used to select the sound mode.

SOURCE

Used to display all of the available video sources.

INFO

Used to view the channel information and setting status you selected.

PRE-CH

Used to switch repeatedly between the last two channels displayed.

Do not mix battery types, i.e. alkaline and manganese.

English - 2

Used to display the next or previous stored channel.

EXIT

Used to exit from any display or return to normal viewing.

MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or

button.

ENTER

While using the onscreen menus, press the ENTER button to activate (or change) a particular item.

S.MODE

Used to select the sound effect.

((

P. MODE

Used to select the picture effect.

))

Used to return to the TV mode when it is in external input mode.

SLEEP

Used to select a preset time interval for automatic turn off.

Switching the Television On and Off

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the

➢

television and the frequency is 50 or 60Hz.

2 Press the “ I ” button (On/Off) on the front (or side) of the

television.

3 Press the POWER button on the remote control to

switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” or “Channel - Manual Store” on page 4.

If the television is initially powered on, several basic

➢

customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.

4 To switch the television off, press the “ I ” button (On/Off)

on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER button on the remote control while

viewing. The television is in standby mode.

2 To switch the television back on, simply press it again.

Do not leave the television in standby mode for long

☛

periods of time (when you are away on holiday, for example). Turn the television off by pressing the “I” button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.

2 Press the … or † button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the … or † button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the …/†/œ/√ button to change the selected

items. Press the MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Setup - Plug & Play

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in standby

mode, press the POWER button on the remote control. The Plug & Play is displayed. It flickers for a little while, and then Language menu is displayed.

Plug & Play

Language

English

Français

Türkçe

Move Enter

continued...

2 Select the appropriated

language by pressing the … or † button. Press the

Check antenna input.

Enter Exit

ENTER button. The Check antenna input. is displayed.

If any language is not selected, the language menu

➢

will disappear about 30 seconds later.

3 Make sure that the antenna

is connected to the television (refer to page 1). Press the ENTER button. The Auto Store menu is displayed with Area selected.

Area : Belgie

Move Enter Return

Auto Store

ASIA W/EUROPE

CIS E/EUROPE CHINA HONGKONG U/K AUSTRALIA NZ/INDONESIA SOUTH AFRICA AMERICA

√√

4 Press the ENTER button again.

5 Press the … or † button to select your area. Press the

ENTER button.

6 To search the channels,

select Search by pressing the … or † button. Press the ENTER button.

7 Press the ENTER button

again to start search channels. To stop the search, press the ENTER button. When the channel searching has finished, the Time menu is displayed with Clock selected.

P 1 102MHz

Start

Enter Return

Stop

Enter Return

--:--

Clock Sleep Timer : Off On Timer Off Timer On Timer Volume : 10

--:--

am Off am Off

7 %

Time

8 Press the œ or √ button to

move to the hour or minute. Set the hour or minute by

Move Enter Return

pressing the … or † button.

continued...

9 When you have finished,

Enjoy your watching

press the MENU button. The Enjoy your watching is displayed, and then the channel which has been stored will be activated.

Re-setting the Plug & Play

Method: MENU ➜ …/† (Setup) ➜ ENTER ➜ …/† (Plug & Play) ➜ ENTER

Input

(depending on the model)

Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration

Move Enter Return

Source List / Edit Name

◆ Source List

You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top box, and the TV source (broadcast or cable).

You can change the required external source simply

➢

by pressing the SOURCE button on the remote

TV AV1 ---AV2 ---S-Video ---Component ----

Move Enter Return

control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control.

◆ Edit Name

You can give a name to the external source.

AV1 : Belgie

AV2 : S-Video : Component :

Move Enter Return

Source List

Edit Name

----

VCR DVD Cable STB Sat. STB AV Recv. DVD Recv. Game Camcorder DVD Combo

Setup

√√

√√ √√ √√ √√ √√

√√

√√ √√

English - 3

+ 5 hidden pages