Samsung CS-29Z58HE, CS-29Z58HN, CS-29Z57HE, CS-29Z50HN User Manual

COLOR TELEVISION

1 2

CS29Z40/29Z45/29Z50 WS32Z40

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

Connection Panel (depending on the model)

The product colour and shape may vary depending on the

➢

model.

Rear Panel

Connecting to the HDMI Input

The HDMI output, such as a Set-Top Box, DVD player, AV receiver or digital TV.

➢

5 connector is used for equipment with HDMI

No additional Audio connection is needed for an HDMI

to HDMI connection.

Side Panel

Record your Model and Serial number here for future reference.

▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

The product colour and shape may vary depending on the

➢

model.

Front (or Side) Panel

1 2 4 5 63

1 Remote control sensor 2 Standby indicator 3 Power on/off 4 On-screen menu display 5 Volume adjustment 6 Channel selection

 You can use the 6 buttons to switch the TV on when it is

in standby mode depending on the model.

 The 5 and 6 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

2 3

Whenever you connect an audio or video system to your

☛

television, ensure that all elements are switched off.

Please be sure to match the colour coded input terminals

☛

and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

Connecting to the RCA Output

The RCA

2 connectors are used for equipment, such as a

recording VCR or audio system.

Connecting to the RCA Input

3 connectors are used for equipment, such as a

The RCA VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the

AUDIO-L input connector.)

The RCA

4 connectors are used for equipment such as a

DVD with component output.

cable television

network

1 (75 Ω

Connecting to the S-VIDEO Input

The 1 (S-VIDEO IN) and 3 (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.

Connecting to the RCA Input

The 3 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

S-Video input

Video input

Audio input

English - 1

AA68-03903A-01

Remote Control (depending on the model)

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

This is a special remote control for the visually impaired,

➢

and has Braille points on the POWER, Channel and Volume buttons.

4 CH MGR

Used to display channel lists on the screen.

5 TV

Used to return to the TV mode when it is in external input mode.

/ Used to increase or decrease the volume.

7 MENU

Used to display the on-screen menu or return to the previous menu.

8 ▲/▼/◄/►

Used to control the cursor in the menu.

9 INFO

Used to view the channel information and setting status you selected.

0 S.MODE

Used to select the sound effect.

! P.MODE

Used to select the picture effect.

@ DUAL I-II

Used to select the sound mode.

# TURBO

Used to select the turbo sound option.

$ SOURCE

Used to display all of the available video sources.

% PRE-CH

Used to switch repeatedly between the last two channels displayed.

^ SLEEP

Used to select a preset time interval for automatic turn off.

& SRS

Used to select the SRS TruSurround XT mode.

* P / P

Used to display the next or previous stored channel.

( EXIT

Used to exit from any display or return to normal viewing.

) MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE,

button.

a ENTER

While using the on-screen menus, press the ENTER button to activate (or change) a particular item.

b STILL

Used to freeze the current picture.

c P.SIZE

Used to change the screen size.

, or

Switching the Television On and Off

The mains lead is attached to the rear of the television

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the

➢

television and the frequency is 50 or 60Hz.

2 Press the “

television.

3 Press the POWER button on the remote control to switch

the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel

- Auto Store” on page 3 or “Channel - Manual Store” on page 4.

If the television is initially powered on, several basic

➢

4 To switch the television off, press the “

(On/Off) on the front of the television.

” button (On/Off) on the front of the

customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.

” button

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER button on the remote control while

viewing. The television is in standby mode.

2 To switch the television back on, simply press it again.

You can also switch on by pressing the TV (

➢

/ P , or numeric button.

1 POWER

Used to switch the TV on and off.

2 Numeric buttons

Used to select channels directly.

3 -/--

Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “–” ends of the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 2

Do not leave the television in standby mode for long

☛

periods of time (when you are away on holiday, for example). Turn the television off by pressing the “ button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

”

English - 3

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.

2 Press the ▲ or ▼ button to select one of the icons. Press

the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Setup - Plug & Play

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in standby

mode, press the POWER button on the remote control. The message Start Plug &

Play.

is displayed. To start Plug & Play, press the ENTER button. The Language menu is displayed.

The Language menu will

➢

automatically appear after several seconds, even if the ENTER button is not pressed.

2 Select the appropriated

language by pressing the ▲ or ▼ button. Press the ENTER button. The Check antenna input. is displayed.

If any language is not selected, the language menu

➢

will disappear about 30 seconds later.

Plug & Play

Start Plug & Play

Enter Return

Language

English

Français

Türkçe

Move Enter Skip

Plug & Play

Check antenna input.

Enter Skip

continued...

3 Make sure that the antenna

is connected to the television (refer to page 1). Press the ENTER button. The Area menu is displayed.

4 Press the ▲ or ▼ button to

select your country. Press the ENTER button.

5 To search the channels, press

the ENTER button. To stop the search, press the ENTER button. When the channel searching has finished, the Clock Set menu is displayed.

6 Press the ◄ or ► button to

move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button.

7 When you have finished,

press the MENU button. The Enjoy your watching is displayed, and then the channel which has been stored will be activated.

Re-setting the Plug & Play

Method: MENU

 ▲/▼ (Setup)  ENTER

 ▲/▼ (Plug & Play)  ENTER

Area

Asia/W.Europ CIS/E.Europe

China

HONG KONG/UK

Australia

NZL/Indonesia

South Africa

America

Move Enter Skip

P 1 C - -

Enter Skip

T V

Move Adjust Skip

T V

87 MHz

Stop

Clock Set

Hour Minute am/pm

-- -- am

Plug & Play

Enjoy your watching.

Setup

Plug & Play ► Language : English Time ► Blue Screen : On ► Melody : On ►

Move Enter Return

10%

Input - (depending on the model) Source List / Edit Name

 Source List

T V

You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top box, and the TV source (broadcast or cable).

You can change the required external source simply

➢

by pressing the SOURCE button on the remote

Move Enter Return

control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control.

 Edit Name

T V

You can give a name to the external source.

Move Enter Return

Source List

TV AV1 : ---AV2 : ---AV3/S-Video : ---Component1 : ---Component2 : ---HDMI : ----

Edit Name

AV1 : ----

AV2 : ---- AV3 : ---- S-Video : ---- Component1 : ---Component2 : ---HDMI : ----

----

VCR DVD Cable STB HD STB Sat. STB AV Receiver

Channel - Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

Channels are sorted and stored

T V

in the order which reflects their position in the frequency range (with lowest first and highest last). The programme originally selected is then displayed.

To stop the search before it

➢

has finished, press the

ENTER

button.

When finished, the

Sort menu

is displayed. To sort the stored

Move Enter Return

P 1 C - -

Enter Return

channels into the desired numerical order, refer to “Channel - Sort” on page 4. To exit without sorting, press the

EXIT button.

Area : Asia/W.Europe Search ►

Auto Store

►

87 MHz

Stop

10%

+ 5 hidden pages