Samsung CS-29Z45ML, CS-29Z40MQ, CS-29Z57PQ, CS-29Z45MQ, CS-29Z40PQ User Manual

...
COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
Connection Panel
The actual configuration of your TV may be different,
depending on your model.
Rear Panel
(depending on the model)
cable television network
Connecting to the RCA Output
The RCA66connectors are used for equipment, such as a recording VCR or audio system.
Connecting to the RCA
The RCA4 and RCA5 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA77connectors are used for equipment such as a DVD with component output (480i only).
or
Front (or Side) Panel
Input
Control Panel
The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
1 Remote control sensor 2 Standby indicator 3 Power on/off 4 On-screen menu display 5 Volume adjustment 6 Channel selection
You can use the 6 buttons to switch the TV on when it is
The 5 and 6 buttons also have the same function as the œ///buttons on the remote control.
If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.
(depending on the model)
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.
Connecting to an
Connect the aerial or network input cable to the 1 (75 coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.
Connecting to the SCART Input/Output
The SCART2 and SCART3 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART2 is also used for equipment with an RGB output, such as a video game device or video disc player.
Aerial or Cable Television Network
continued...
3 S-Video input
2 Video input
1 Audio input
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.
Connecting to the S-VIDEO Input
The 3 (S-VIDEO IN) and 1 (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.
English - 1
AA68-03796A-04
Remote Control
(depending on the model)

Switching the Television On and Off

Operation of remote control may be affected by bright
artificial light near to the TV.
88
TURBO
Used to select the turbo sound option.
99
P.SIZE
Used to change the screen size.
00
DUAL I-II
Used to select the sound mode.
!!
SOURCE
Used to display all of the available video sources.
@@
INFO
Used to view the channel information and setting status you selected.
##
PRE-CH
Used to switch repeatedly between the last two channels displayed.
$$
P/
Used to display the next or previous stored channel.
%%
EXIT
Used to exit from any display or return to normal viewing.
^^
MUTE
Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or
button.
&&
ENTER
While using the on­screen menus, press the ENTER button to activate (or change) a particular item.
**
S.MODE
Used to select the sound effect.
((
P. MODE
Used to select the picture effect.
))
TV
Used to return to the TV mode when it is in external input mode.
aa
SLEEP
Used to select a preset time interval for automatic turn off.
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 Press the “I” button (On/Off) on the front (or side) of the
television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” on page 3 or “Channel ­Manual Store” on page 4.
If the television is initially powered on, several basic
customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.
4 To switch the television off, press the “I” button (On/Off)
on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
11
POWER
Used to switch the TV on and off.
22
Numeric buttons
Used to select channels directly.
33
-/--
Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number.
44
55
66
77
/
Used to increase or decrease the volume.
MENU
Used to display the on­screen menu or return to the previous menu.
/ † / œœ / √
Used to control the cursor in the menu.
S.MENU
Used to display the sound menu.
Installing Batteries
Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “-” ends of the batteries are inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
English - 2
1 Press the POWER button on the remote control while
viewing. The television is in standby mode.
2 To switch the television back on, simply press it again.
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for example). Turn the television off by pressing the “I” button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.
2 Press the … or button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the … or button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the …//œ/button to change the selected
items. Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.

Setup - Plug & Play

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
1 If the television is in standby
mode, press the POWER button on the remote control. The Plug & Play is displayed. It flickers for a little while, and then Language menu is displayed.
2 Select the appropriated
language by pressing the or button. Press the ENTER button. The Check antenna input. is displayed.
If any language is not selected, the language menu
will disappear about 30 seconds later.
3 Make sure that the antenna
is connected to the television (refer to page 1). Press the ENTER button. The Auto Store menu is displayed with Area selected.
Plug & Play
Language
English Melayu Indonesia
Move Enter
Check antenna input.
Enter Exit
TV
Area : Belgie
Search
Move Enter Return
Auto Store
ASIA W/EUROPE
CIS E/EUROPE CHINA HONGKONG U/K AUSTRALIA NZ/INDONESIA SOUTH AFRICA AMERICA
continued...
4 Press the ENTER button again.
5 Press the or button to select your area. Press the
ENTER button.
6 To search the channels,
Search
select Search by pressing the or button. Press the ENTER button.
7 Press the ENTER button
again to start search channels. To stop the search, press the ENTER button. When the channel searching has finished, the Time menu is displayed with Clock selected.
8 Press the œ or button to
move to the hour or minute. Set the hour or minute by
P 1 102MHz
TV
Start
Enter Return
Search
--:--
--:--
--:--
Time
am
am Off am Off
7 %
Stop
Enter Return
Clock Sleep Timer : Off On Timer Off Timer On Timer Volume : 10
Move Enter Return
pressing the … or † button.
9 When you have finished,
press the MENU button.
Enjoy your watching
The Enjoy your watching is displayed, and then the channel which has been stored will be activated.
Re-setting the Plug & Play
Method: MENU …/ (Setup) ENTER / (Plug & Play) ENTER
English - 3
TV
Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration
Move Enter Return
Setup
Input
(depending on the model)
-
Source List / Edit Name
Source List
You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top box, and the TV source (broadcast or cable).
You can change the required external source simply
by pressing the SOURCE button on the remote
TV
TV AV1 ---­AV2 ---­S-Video ---­Component ----
Move Enter Return
control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control.
Edit Name
You can give a name to the external source.
TV
AV1 : Belgie
AV2 : S-Video : Component :
Move Enter Return
Source List
Edit Name
----
VCR DVD Cable STB Sat. STB AV Recv. DVD Recv. Game Camcorder DVD Combo

Channel - Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
Channels are sorted and stored in the order which reflects their position in the frequency range
TV
Area : Belgie
Search
(with lowest first and highest last). The programme originally selected is then displayed.
To stop the search before it
has finished, press the MENU button.
Move Enter Return
P 1 102MHz
When finished, the Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to “Channel - Sort”. To exit without sorting, press the EXIT button.
Auto Store
ASIA W/EUROPE
CIS E/EUROPE CHINA HONGKONG U/K AUSTRALIA NZ/INDONESIA SOUTH AFRICA AMERICA
Search
Stop
Enter Return
7 %
Loading...
+ 5 hidden pages