COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
DNIe Jr
(OPTION)
(Digital Natural Image engine Junior)
TELETEXT
(OPTION)
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 1
3
ENG
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■ Control Panels (depending on the model)..................................................... 5
■ Connection Panels (depending on the model) .............................................. 6
■ Infrared Remote Control (All Functions Except Teletext).............................. 8
■ Infrared Remote Control (Teletext Functions)............................................... 9
■ Inserting the Batteries in the Remote Control................................................ 10
■ Connecting to an Aerial or Cable Television Network................................... 10
■ Switching Your Television On and Off........................................................... 11
■ Placing Your Television in Standby Mode..................................................... 11
■ Becoming Familiar with the Remote Control................................................. 12
■ Plug & Play Feature (depending on the model)............................................. 13
■ Viewing the Demonstration............................................................................ 14
■ Choosing Your Language.............................................................................. 14
◆ SETTING THE CHANNELS
■ Storing Channels Automatically..................................................................... 15
■ Storing Channels Manually............................................................................ 16
■ Skipping Unwanted Channels ....................................................................... 18
■ Sorting the Stored Channels ......................................................................... 19
◆ USING YOUR TELEVISION
■ Changing the Picture Standard ..................................................................... 20
■ Adjusting the Picture Settings........................................................................ 21
■ Selecting the Picture Size.............................................................................. 22
■ Extra Picture Settings (depending on the model).......................................... 23
■ Using the Tilt Control Feature (depending on the model).............................. 24
■ Setting the Blue Screen................................................................................. 24
■ Changing the Sound Standard...................................................................... 25
■ Adjusting the Sound Settings (depending on the model) .............................. 26
■ Extra Sound Settings (depending on the model)........................................... 27
■ Selecting the Melody..................................................................................... 28
■ Selecting the Sound Mode (depending on the model) .................................. 29
■ Setting and Displaying the Current Time....................................................... 30
■ Setting the Sleep Timer................................................................................. 31
■ Switching the Television On and Off Automatically....................................... 32
■ Setting the Preferred Volume Level............................................................... 33
■ Using the LNA (Low Noise Amplifier) feature (depending on the model)...... 34
■ Activating the Child Lock............................................................................... 35
■ Viewing an External Signal Source (depending on the model) ..................... 36
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 3
4
ENG
Contents (continued)
◆ USING THE TELETEXT FEATURE (depending on the model)
■ Teletext Feature (depending on the model) .................................................. 38
■ Displaying the Teletext Information (depending on the model)..................... 38
■ Selecting a Page by Number (depending on the model)............................... 39
■ Using FLOF to Select a Page (depending on the model).............................. 40
■ Storing Teletext Pages (depending on the model)........................................ 40
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■ Connecting to the AV-1 or 2 Input/Outputs.................................................... 41
■ Connecting to the S-VIDEO Input (depending on the model)........................ 41
■ Connecting to the DVD Input (depending on the model)............................... 42
■ Connecting to the RCA Input (depending on the model)............................... 42
■ Connecting to the Audio Output (depending on the model) .......................... 42
■ Connecting Headphones (depending on the model)..................................... 43
■ Viewing Pictures From External Sources (depending on the model)............ 43
◆ RECOMMENDATIONS FOR USE
■ Automatic Degaussing to Remove Colour Patches....................................... 44
■ Troubleshooting: Before Contacting Service Personnel................................ 44
☛
➢
Press Important Note
Symbols
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 4
5
ENG
➢
The actual configuration on your TV may be different, depending on
your model.
Control Panels (depending on the model)
1) Input source selection
2) Menu display
3) Volume adjustment
4) Channel selection
5) Remote control sensor
6) Standby indicator
7) Power On/Off
➢
Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the panel of
the TV to:
◆
Switch on the TV when it is in Standby mode and select channels ( ▼ CH ▲ or CH ).
◆
Access the menu ( MENU ).
◆
Adjust the volume ( - VOL+).
◆
Switch among Video input modes ( TV/VIDEO ).
Front of the TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 5
6
ENG
Connection Panels (depending on the model)
Side of TV Front of TV
ΠCONNECTING EXTERNAL A/V DEVICES (INPUT)
The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc
players and some video game devices.
➢
◆ When both the side (or front) and rear connectors are connected to external equipment,
the side (or front) AV has the priority.
◆ When using the mono equipment such as camcorders, video disc players and some video
game devices, connect to the “AUDIO-L” input connector.
´ CONNECTING EXTERNAL S-VIDEO DEVICES (INPUT) (Option)
-
Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR.
ˇ CONNECTING HEADPHONES (Option)
-
You can connect a set of headphones to your television if you wish to watch a television programme
without disturbing the other people in the room.
-
Prolonged use of headphones at a high volume may damage your hearing.
☛
Whenever you connect an audio or video system to your
television, ensure that all
elements are switched off.
Refer to the documentation supplied with your equipment for
detailed connection instructions and associated safety
precautions.
➢
This figure shows the Standard Connector-jack panel.
The actual configuration on your TV may be different, depending on
the model.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 6
7
ENG
Connection Panels (depending on the model) (continued)
Œ
MONITOR OUT (VIDEO / L-AUDIO-R)
Outputs for external devices.
´ AV 1 (VCR) -VIDEO/AUDIO(L/R)
AV 2 (VCR) -VIDEO/L-AUDIO-R
Inputs or outputs for external devices,
such as VCR,DVD, video game device or
video disc players.
ˇ COMPONENT (DVD)
VIDEO (Y/Pb/Pr) and AUDIO (L/R) inputs
for Component.
¨ VHF/UHF (75Ω)
75Ω Coaxial connector for Aerial/
Cable Network.
ˆ / (SCART)
Inputs or outputs for external devices,
such as VCR, DVD, video game device or
video disc players.
Rear of TV
➢
Available format for Component Inputs : 480i
➢
When using the mono equipment such as camcorders, video disc players and some video
game device, connect to the “AUDIO-L” input connector.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 7
8
ENG
Infrared Remote Control (All Functions Except Teletext)
TELEVISION STAND-BY
SOUND MENU DISPLAY
ONE/TWO-DIGIT CHANNEL
SELECTION
TURBO SOUND
TEMPORARY SOUND SWITCH-
OFF
VOLUME DECREASE
PREVIOUS CHANNEL
DIRECT CHANNEL SELECTION
TUNER/CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION
INFORMATION DISPLAY
AUTOMATIC SWITCH-OFF
PICTURE SIZE
NEXT CHANNEL
VOLUME INCREASE
PICTURE EFFECT SELECTION
SOUND EFFECT SELECTION
SOUND MODE SELECTION
MENU DISPLAY
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
EXIT FROM ANY DISPLAY
CHANGE CONFIRMATION
➣
Operation of remote control may be affected by bright artificial light near to the TV set.
➢
The actual configuration on your TV may be different, depending on
the model.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 8
9
ENG
Infrared Remote Control (Teletext Functions)
TELETEXT PAGE HOLD
FASTEXT TOPIC SELECTION
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT
INFORMATION AND THE NORMAL
BROADCAST
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT REVEAL
TELETEXT STORE
TELETEXT SIZE SELECTION
PROGRAMME SELECTION
BY NAME
TELETEXT SUB-PAGE
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 9
10
Connecting to an Aerial or Cable Television Network
ENG
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1 In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2 If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 15.
◆ “Storing Channels Manually” on page 16.
➢
Signal Strength( ) display (Option)
The “ ”(Signal Strength) symbol is displayed by
pressing the “INFO ( )” button. This symbol displays
signal strength for your watching TV channel. The more
signal bar is the better TV gets sensitivity on current
channel.
Rear of the TV
Cable Television
Network
or
P 4
Mono
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1 Remove the cover on the rear of the remote control by pressing
the symbol
()
downwards and then pulling firmly to remove it.
2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆
-
on the battery against -on the remote control
◆
+
on the battery against +on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 10
11
ENG
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the “ ” button (On/Off) on the front of the television.
Result
: The Standby indicator on the front of the television
lights up.
3 Press the POWER ( ) button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
15 or “Storing Channels Manually” on page 16.
4 To switch your television off, press the “ ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER ( ) button on the remote control.
Result
: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2 To switch the television back on, simply press the POWER ()
button again.
➢
You can also switch on by pressing the P or button.
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 11
12
ENG
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next
-
stored channel.
Used to display the previous
-
stored channel.
to Used to display the corresponding channels.
-/--
Used to select a channel numbered ten or over.
Press this button, and the “
--
” symbol is displayed.
Enter the two-digit channel number.
PRE-CH Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the volume.
-
Used to decrease the volume.
-
MUTE Used to switch the sound off temporarily.
➢
To turn the sound back on, press this button again, or
press the or button.
MENU Used to display the Used to return to the previous
on-screen menu system. menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
Used to confirm your choice.
EXIT
-
Used to exit from the menu
system and return to normal
viewing directly.
TV ◆ Used to return the TV
-
mode when it is in external
input mode.
Becoming Familiar with the Remote Control
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 12
13
ENG
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result
: The message Plug & Play is displayed. It flickers for
a little while and then
Language menu is automatically
displayed.
2 Select the appropriate language by pressing the ▼ or ▲ button.
Press the
ENTER ( ) button to enter the language.
Result
: The message Check antenna input. is displayed.
➢
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
3 Make sure that the antenna is connected to the TV.
Press the
ENTER ( ) button.
Result
: The Auto Store menu is displayed with Area is
selected.
4 Press the ENTER ( ) button again. Select your area by pressing
the
▼ or ▲ button, and then Press the ENTER ( ) button.
To search the channels, select
Search by pressing the ▼ or ▲
button, and then press the ENTER ( ) button.
Press the
ENTER ( ) button again to start search the channels.
Press the
MENU ( ) button to stop the search.
Result
: The Time menu is displayed with Clock is selected.
➢
Refer to “Storing Channels Automatically” on page 15.
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the
▼ or ▲ button.
➢
Refer to “Setting and Displaying the Current Time” on page
30.
6 When you have finished, press the MENU ( ) button.
Result
: The message Enjoy your watching is displayed,
and then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU ( ) button.
2 Press the ▼ or ▲ button to select Setup, and then press the
ENTER ( ) button.
Result
: The Plug & Play is selected.
3 Press the ENTER ( ) button again.
Result
: This feature starts with the message Plug & Play
is displayed.
Plug & Play Feature (depending on the model)
Plug & Play
Enjoy your watching
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue Screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Move Enter Return
Auto Store
Area : ASIA W/EUROPE
√√
Search
√√
TV
Move Enter Return
Time
Clock -- : -- am
Sleep Timer : Off
On Timer -- : -- am Off
Off Timer -- : -- am Off
On Timer Volume : 10
TV
Language
English
Melayu
Indonesia
Check antenna input.
Enter Exit
Move Enter
Search
Enter Return
Start
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 13
14
ENG
To become familiar with the various menus provided by your
television, you can view the in built demonstration.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Demonstration.
5 Press the ENTER ( ) button.
Result
: Each of the menu options is displayed in turn.
➢
When you wish to exit from the demonstration, press the
EXIT ( ) button on the remote control.
Viewing the Demonstration
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Language.
5 Select the appropriate language by pressing the ENTER ()
button repeatedly.
Choosing Your Language
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 14
15
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3 Press the ENTER ( ) button.
Result
: The Auto Store is selected.
4 Press the ENTER ( ) button again.
Result
: The options available in the Auto Store group are
displayed with
Area is selected.
5 Press the ENTER ( ) button again.
6 Select your area by pressing the ▼ or ▲ button, then press the
ENTER ( ) button.
The areas are displayed in the following order:
ASIA W/EUROPE-CIS E/EUROPE-CHINA-HONGKONG U/K
-
AUSTRALIA-NZ/INDONESIA-SOUTH AFRICA-AMERICA
7 Press the ▼ or ▲ button to select Search, then press the ENTER
( ) button.
8 Press the ENTER ( ) button to start the search.
Result
: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢
To stop the search before it has finished, press the MENU
( ) button.
9 When searching and storing are complete, the Sort menu is
displayed.
◆
To sort the stored channels into the desired numerical order,
go to Step
6 of the “Sorting the Stored Channels” procedure
on page 19.
◆
To exit from the channel store function without sorting the
channels, press the
MENU ( ) button repeatedly until the
menus disappear.
10 When the channels have been stored, you can:
◆
Sort them in the order required (refer to page 19)
◆
Clear a channel (refer to page 18)
◆
Activate the Digital Noise Reduction feature (refer to page 23)
Storing Channels Automatically
ENG
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
LNA : Off
√√
TV
Move Enter Return
Auto Store
Area : ASIA W/EUROPE
√√
Search
√√
TV
Move Enter Return
Auto Store
Area : ASIA W/EUROPE
√√
Search
√√
TV
Move Adjust Return
Sort
From : P 1
To : P--
Store : ?
TV
ASIA W/EUROPE
CIS E/EUROPE
CHINA
HONGKONG U/K
AUSTRALIA
NZ/INDONESIA
SOUTH AFRICA
AMERICA
Search
Enter Return
Start
Search
Enter Return
Stop
P1 102 MHZ
7%
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 15
16
ENG
You can store the channels, including those received via cable
networks.
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Channel.
3 Press the ENTER ( ) button.
Result
: The options available in the Channel group are
displayed.
4 Press the ▼ or ▲ button to select Manual Store.
5 Press the ENTER ( ) button.
6 To assign a programme number to a channel, press the œ or √
button.
7 Press the ▼ or ▲ button to select Color system.
8 Press the ENTER ( ) button.
9 Press the ▼ or ▲ button to select the broadcasting standards.
Result
: The color standards are displayed in the following
order:
AUTO-PAL-SECAM-NT4.43
-
NT3.58.
10 Press the ENTER ( ) button.
11 Press the ▼ or ▲ button to select Sound System.
12 Press the ENTER ( ) button.
13 Press the ▼ or ▲ button to select the sound standards.
Result
: The sound standards are displayed in the following
order:
BG-DK-I
-
M.
14 Press the ENTER ( ) button.
Storing Channels Manually
Move Enter Return
Manual Store
Programme : P 3
Color System : AUTO
√√
Sound System : BG
√√
Search : 46MHz
Channel : C 1
Store : ?
TV
Move Enter Return
Manual Store
Programme : P 3
Color System : Auto
√√
Sound System : BG
√√
Search : 46MHz
Channel : P 1
Store : ?
TV
Move Enter Return
Manual Store
Programme : P 3
Color System : AUTO
√√
Sound System : BG
√√
Search : 46MHz
Channel : C 1
Store : ?
TV
Move Enter Return
Manual Store
Programme : P 3
Color System : AUTO
√√
Sound System : BG
√√
Search : 46MHz
Channel : C 1
Store : ?
TV
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
LNA : Off
√√
TV
AUTO
PAL
SECAM
NT4.43
NT3.58
BG
DK
I
M
Move Adjust Return
Manual Store
Programme : P 3
Color System : AUTO
√√
Sound System : BG
√√
Search : 46MHz
Channel : C 1
Store : ?
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 16
17
ENG
15 If you do not know the channel numbers, select Search by
pressing the
▼ or ▲ button. Press the œ or √ button to start the
search.
Result
: The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
16 If you know the number of the channel to be stored, see the
following steps.
◆
Press the ▼ or ▲ button to select Channel.
◆
Press the √ button.
◆
Press the ▼ or ▲ button to select C (Air channel) or S (Cable
channel).
◆
Press the √ button.
◆
Press the ▼ or ▲ button to select indicate the required
number.
➢
You can also select the channel number directly by
pressing the numeric buttons (0~9).
◆
Press the ENTER ( ) button to select the required number.
➢
If no sound or abnormal sound, re-select the sound standard
required.
17 To store the channel and associated programme number, select
Store by pressing the ▼ or ▲ button. Press the ENTER ()
button to select
OK.
18 Repeat Steps 16 to 17 for each channel to be stored.
☛
Channel mode
◆ P (Programme mode):
When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode):
You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode):
You can select a channel by
entering the assigned number for each cable channel in this
mode.
Storing Channels Manually (continued)
Move Enter Return
Manual Store
Programme : P 3
Color System : AUTO
√√
Sound System : BG
√√
Search : 46MHz
Channel : C 1
Store : ?
TV
Move Enter Return
Manual Store
Programme : P 3
Color System : AUTO
√√
Sound System : BG
√√
Search : 46MHz
Channel : C 1
Store : ?
TV
Move Search Return
Manual Store
Programme : P 3
Color System : AUTO
√√
Sound System : BG
√√
Search : 46MHz
Channel : C 1
Store : ?
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 17
18
ENG
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Add/Delete.
5 Press the ENTER ( ) button.
Result
:
The stored channels are displayed.
6 Press the ▼ or ▲ button to select the channel to add or erase.
If necessary, select
Added or Deleted by pressing the ENTER
( ) button.
7 Repeat Step 6 for each channel to be added or erased.
Skipping Unwanted Channels
Move Enter Return
Add/Delete
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
TV
Move Enter Return
Add/Delete
P 1 : Deleted
P 2 : Added
P 3 : Added
P 4 : Added
TV
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
LNA : Off
√√
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 18
19
ENG
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Sort.
5 Press the ENTER ( ) button.
Result
: The options available in the Sort group are displayed
with
From is selected.
6 Select the channel number that you wish to change by pressing
the
œ or √ button repeatedly.
7 Press the ▼ or ▲ button to select To. Select the new channel
number which you wish to identify by pressing the
œ or √ button
repeatedly.
➢
You can also select the channel number directly by pressing
the numeric buttons (0~9).
8 Press the ▼ or ▲ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the
ENTER ()
button.
Result
:
The selected channel is exchanged with the one
previously stored to the chosen number.
9 For all the channels to move to the required channel numbers,
repeat steps
6 to 8 after selecting the From by pressing the ▼ or ▲
button.
Sorting the Stored Channels
Move Adjust Return
Sort
From : P 1
To : P--
Store : ?
TV
Move Adjust Return
Sort
From : P 1
To : P 3
Store : ?
TV
Move Enter Return
Sort
From : P 3
To : P 1
Store : OK
TV
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
LNA : Off
√√
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 19
20
ENG
You can select the type of picture which best corresponds to your
viewing requirements.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ENTER ( ) button again to select Mode.
Result
: The options available in the Mode group are displayed.
5 Press the ▼ or ▲ button to select picture mode.
Result
: The following picture effects are available:
Dynamic-Standard-Movie
-
Custom.
6 Press the ENTER ( ) button.
➢
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
Changing the Picture Standard
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Dynamic
Standard
Movie
Custom
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 20
21
ENG
Your television has several settings which allow you to control
picture quality.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Custom.
5 Press the ENTER ( ) button.
Result
: The options available in the Custom group are
displayed.
6 Press the ▼ or ▲ button to select the option (Contrast,
Brightness, Sharpness, Color or Tint -NTSC only) to be adjusted.
Press the
ENTER ( ) button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
œ or √
button.
7 Press the EXIT ( ) button.
Selecting the Color Tone
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Color Tone.
5 Press the ENTER ( ) button.
6 Press the ▼ or ▲ button to select the required option (Cool2,
Cool1, Norma l , Warm1 or Warm2).
7 Press the ENTER ( ) button.
➢
◆ If you make any changes to these settings, the picture
standard is automatically switched to
Custom.
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 44.)
Adjusting the Picture Settings
Contrast 100
Move Enter Return
Custom
Contrast : 100
Brightness : 45
Sharpness : 50
Color : 55
TV
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Cool2
Cool1
Normal
Warm1
Warm2
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 21
22
ENG
Selecting the Picture Size
You can select the picture format which best corresponds to your
viewing requirements. The following picture formats are available
in the order given:
◆ Normal, Zoom
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Size.
5 Press the ENTER ( ) button.
6 Press the ▼ or ▲ button to select the picture size (Normal or
Zoom).
7 Press the ENTER ( ) button.
➢
You can select the required picture format by simply
pressing the “P.SIZE( )”(Picture Size) button on the
remote control.
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Normal
Zoom
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 22
23
◆ Digital NR
If the signal received by your television is weak, you can activate
this feature to reduce any static and ghosting that may appear on
the screen.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the
Picture group are
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Digital NR.
5 Press the ENTER ( ) button.
6 Press the ▼ or ▲ button to select On.
7 Press the ENTER ( ) button.
◆ DNIe Jr
(Digital Natural Image engine Junior) (Option)
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white enhancement.
New image compensation Algorithm gives brighter, clearer,
much detailed image to you.
DNIe Jr technology will fit every
signals into your eyes.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select DNIe Jr.
5 Press the ENTER ( ) button.
6 Press the œ or √ button to select On.
7 Press the ENTER ( ) button.
Extra Picture Settings (depending on the model)
ENG
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : Off
√√
Tilt : 0
TV
Move Enter Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
Off
On
DNIe Jr
On Off
Adjust Enter Return
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 23
24
ENG
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Tilt.
5 Press the œ or √ button to reach the required setting (-7 to +7).
Using the Tilt Control Feature (depending on the model)
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Blue screen.
5 Press the ENTER ( ) button.
6 Press the ▼ or ▲ button to select On.
7 Press the ENTER ( ) button.
Setting the Blue Screen
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Off
On
Move Adjust Return
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 24
25
ENG
You can select the type of special sound effect to be used when
watching a given broadcast.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Sound.
Result
: The options available in the Sound group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ENTER ( ) button again to select Mode.
Result
: The options available in the Mode group are displayed.
5 Press the ▼ or ▲ button to select sound mode.
Result
: The following sound effects are available:
Standard-Music-Movie-Speech(SVE)
-
Custom.
◆
SVE : SAMSUNG Voice Enhancement Technic
6 Press the ENTER ( ) button.
➢
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
Changing the Sound Standard
Move Enter Return
Sound
Mode : Standard
√√
Equalizer
√√
Auto Volume : Off
√√
Pseudo Stereo : Off
√√
Turbo Plus : Off
√√
TV
Move Enter Return
Sound
Mode : Standard
√√
Equalizer
√√
Auto Volume : Off
√√
Pseudo Stereo : Off
√√
Turbo Plus : Off
√√
TV
Standard
Music
Movie
Speech
Custom
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 25
26
ENG
The sound settings can be adjusted to suit your personal preferences.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Sound.
Result
: The options available in the Sound group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Equalizer.
5 Press the ENTER ( ) button.
Result
: The options available in the Equalizer group are
displayed.
➢
You can also display this group simply by pressing the
S.MENU (Sound Menu) button.
6 Select the option to be adjusted by pressing the œ or √ button.
Press the
▼ or ▲ button to reach the required setting.
➢
If you make any changes to these settings, the sound
standard is automatically switched to
Custom.
Adjusting the Sound Settings (depending on the model)
Move Adjust Return
Equalizer
TV
Move Enter Return
Sound
Mode : Standard
√√
Equalizer
√√
Auto Volume : Off
√√
Pseudo Stereo : Off
√√
Turbo Plus : Off
√√
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 26
100 300 1K 3K 10K
27
ENG
◆ Auto Volume
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
◆ Pseudo Stereo
Pseudo stereo feature converts a monaural sound signal
into two identical left and right channels.
Once the Pseudo stereo is set to On or Off , these
settings apply to the sound effects such as
Standard,
Music, Movie , and Speech(SVE).
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie or other channels.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Sound.
Result
: The options available in the Sound group are
displayed.
3 Press the ENTER ( ) button.
4 Select the required option (Auto Volume , Pseudo Stereo or
Turbo Plus) by pressing the ▼ or ▲ button. Press the ENTER
( ) button.
➢
You can select the turbo sound feature simply by pressing
the
TURBO button.
5 To activate each feature, select On by pressing the ▼ or ▲ button.
6 Press the ENTER ( ) button.
Extra Sound Settings (depending on the model)
Move Enter Return
Sound
Mode : Standard
√√
Equalizer
√√
Auto Volume : On
√√
Pseudo Stereo : Off
√√
Turbo Plus : Off
√√
TV
Move Enter Return
Sound
Mode : Standard
√√
Equalizer
√√
Auto Volume : On
√√
Pseudo Stereo : Off
√√
Turbo Plus : Off
√√
TV
Move Enter Return
Sound
Mode : Standard
√√
Equalizer
√√
Auto Volume : Off
√√
Pseudo Stereo : Off
√√
Turbo Plus : Off
√√
TV
Move Enter Return
Sound
Mode : Standard
√√
Equalizer
√√
Auto Volume : Off
√√
Pseudo Stereo : On
√√
Turbo Plus : Off
√√
TV
Off
On
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 27
28
ENG
Selecting the Melody
You can hear clear melody sound when the television is powered on
or off.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Melody.
5 Press the ENTER ( ) button.
6 Press the ▼ or ▲ button to select On (activating) or Off .
7 Press the ENTER ( ) button.
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Off
On
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 28
29
ENG
Selecting the Sound Mode (depending on the model)
The “DUAL
I-II”
button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on
the current transmission.
➣
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the
Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the
Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the
DUAL
I-II
button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
Mono
(Normal use)
Mono ↔ Mono
NICAM (Normal)
Stereo ↔ Mono
NICAM (Normal)
Mono (Normal use)
DUAL-I ↔ DUAL-II
Stereo ↔ Mono
(Forced mono)
Dual-I → Dual-II → Mono
NICAM NICAM (Normal)
NICAM
Stereo
A2
Stereo
→
→
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 29
30
ENG
Setting and Displaying the Current Time
Move Enter Return
TV
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Time
Clock -- : -- am
Sleep Timer : Off
On Timer -- : -- am Off
Off Timer -- : -- am Off
On Timer Volume : 10
Move Adjust Return
TV Time
Clock 11 : 00 am
Sleep Timer : Off
On Timer -- : -- am Off
Off Timer -- : -- am Off
On Timer Volume : 10
You can set the television’s clock so that the current time is displayed
by pressing the “INFO
()
” button. You must also set the time if
you wish to use the automatic on or off timers.
➢
When pressing the “” button (On/Off) on the front of
the television, the clock setting will be reset.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Time .
5 Press the ENTER ( ) button.
Result
: The Time is selected.
6 Press the ENTER ( ) button again.
Result
: The Clock is selected.
7 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the
▼ or ▲ button.
8 Press the ENTER ( ) button.
9 When you have finished, press the EXIT ( ) button to exit.
10 Press the INFO ( ) button to display the channel information and
the current time.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 30
31
ENG
Setting the Sleep Timer
You can set your TV to automatically turn off after a preset
interval.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Time .
5 Press the ENTER ( ) button.
Result
: The Time is selected.
6 Press the ▼ or ▲ button to select Sleep Timer.
7 Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for
staying on by pressing the
œ or √ button.
8 Press the EXIT ( ) button.
➢
You can select a time period of between 30 and 180 minutes
after the television automatically switches to Standby mode
by pressing the
SLEEP ( ) button.
Move Adjust Return
TV Time
Clock 11 : 00 am
Sleep Timer : 30
On Timer -- : -- am Off
Off Timer -- : -- am Off
On Timer Volume : 10
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 31
32
ENG
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
➢
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the page
30). If you have not yet set the clock, the message
Set
the clock first
is displayed.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Time .
5 Press the ENTER ( ) button.
Result
: The Time is selected.
6 Press the ▼ or ▲ button to select On Timer. Set the time at which
you wish the television to be switched on automatically.
◆
Press the œ or √ button to move to the hour or minute.
Set these by pressing the
▼ or ▲ button.
◆
Press the œ or √ button to move Off and then, press the ▼ or
▲ button to select On and press the ENTER ( ) button.
7 Press the ENTER ( ) button.
8 Press the ▼ or ▲ button to select Off Timer. In the same above,
set the time at which you wish the television to be switched off
automatically.
➢
Absent Power Off
When you set the timer “On”, your television will
eventually be turned off, if you do not operate any controls
during the 3 hours after the TV is turned on by timer.
This function is available in only the timer “On” mode and
will prevent a leakage accident or overheating, caused by
your TV left on for a long time due to the timer “On”
(when you are away on holiday, for example).
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Move Adjust Return
TV Time
Clock 11 : 00 am
Sleep Timer : Off
On Timer 06 : 00 am On
Off Timer -- : -- am Off
On Timer Volume : 10
Move Adjust Return
TV Time
Clock 11 : 00 am
Sleep Timer : Off
On Timer 06 : 00 am On
Off Timer 11 : 00 pm On
On Timer Volume : 10
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 32
33
Setting the Preferred Volume Level
ENG
The preferred volume can be set for when the timer automatically
turns on the TV.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Time
5 Press the ENTER ( ) button.
Result
: The Time is selected.
6 Press the ▼ or ▲ button to select On Timer Volume.
7 Press the œ or √ button to adjust volume level.
8 When you have finished, press the EXIT ( ) button.
Move Adjust Return
TV Time
Clock 11 : 00 am
Sleep Timer : Off
On Timer 06 : 00 am On
Off Timer 11 : 00 am On
On Timer Volume : 10
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 33
34
ENG
Using the LNA (Low Noise Amplifier) feature (depending on the model)
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise. This feature is working only weak signal condition,
and that is memorized on current channel, additional.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select LNA.
5 Press the ENTER ( ) button.
6 Press the ▼ or ▲ button to select On.
7 Press the ENTER ( ) button.
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
LNA : Off
√√
TV
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
LNA : Off
√√
TV
Off
On
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 34
35
Activating the Child Lock
ENG
You can restrict viewing by locking the channels of your choice.
Example
: You can prevent your children from watching
unsuitable programmes.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the ENTER ( ) button.
4 Press the
▼ or ▲
button to select the
Child Lock
.
Press the ENTER ( ) button.
5
Press the ENTER ( ) button again.
6 Press the
▼ or ▲
button to select the On.
Result
: The
Child Lock
menu is displayed.
➢
If you want to unlock a channel, set to
Off
.
7
Press the ENTER ( ) button.
8 Press the
▼ or ▲
button to select the
Programme
. Select the
number of the channel to be locked by pressing the
œ or √
button.
9 Press the
▼ or ▲
button to select the
Lock
.
10
Press the ENTER ( ) button
.
Result
:
Locked
is displayed.
11 When you have finished, press the EXIT ( ) or MENU ()
button repeatedly to return to normal viewing.
➢
If any channel is locked, you can not enter the Channel
menu by using the control buttons on the television, and
the message “Not availble” is displayed. You can access
by using the remote control only.
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Child Lock
√√
Blue screen : Off
√√
Melody : On
√√
Demonstration
√√
TV
Move Enter Return
Child Lock
Child Lock : Off
√√
TV
Off
On
Move Adjust Return
TV Child Lock
Child Lock : On
√√
Programme : P 1
Lock : ?
Move Enter Return
TV Child Lock
Child Lock : On
√√
Programme : P 1
Lock : Locked
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 35
36
ENG
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ENTER ( ) button to select Input.
Result
: The options available in the Input group are
displayed.
3 Press the ENTER ( ) button again to select Source List.
Result
: The options available in the Source List group are
displayed.
4 Press the ▼ or ▲ button to select signal source, then press the
ENTER ( ) button.
➢
When you connect equipment to the TV, you can choose
between the following sets of jacks :
AV1, AV2 , S-Video or
Component on the TV’s rear panel, and AV2 or S-Video on
the TV’s side (or front) panel.
➢
S-Video and Component signal sources are depending on
the model.
5 Press the MENU ( ) button.
Result
: The main menu is displayed.
6 Press the ENTER ( ) button to select Input.
Result
: The options available in the Input group are
displayed.
7 Press the ▼ or ▲ button to select Edit Name. Press the ENTER
( ) button.
Result
: The options available in the Edit Name group are
displayed.
Viewing an External Signal Source (depending on the model)
Move Enter Return
Input
Source List
√√
Edit Name
√√
TV
Move Enter Return
Input
Source List
√√
Edit Name
√√
TV
Move Enter Return
Source List
TV
AV1 ---AV2 ---S-Video ---Component ----
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 36
37
8 Press the ▼ or ▲ button to select external device :
AV1-AV2-S-Video
-
Component.
9 Press the ENTER ( ) button.
Result
:
The device names available are listed.
10 Select the name by pressing the † or … button.
Press the
ENTER ( ) button.
11 Set other signal sources (AV1, AV2 , S-Video, Component ) using
the same method as listed above.
➢
You can also set these options simply by pressing the VIDEO
( ) button. If you change the external source while
viewing, pictures might take a short period of time to be
switched.
ENG
Move Enter Return
Edit Name
AV1 : ----
√√
AV2 : ----
√√
S-Video : ----
√√
Component : ----
√√
TV
----
VCR
DVD
Cable STB
Sat. STB
AV Recv.
DVD Recv.
Game
Camcorder
DVD Combo
Move Enter Return
Edit Name
AV1 : ----
√√
AV2 : ----
√√
S-Video : ----
√√
Component : ----
√√
TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 37
38
ENG
Most television channels provide written information services via
teletext. Information provided includes:
◆
Television programme times
◆
News bulletins and weather forecasts
◆
Sports results
◆
Travel information
This information is divided into numbered pages (see diagram).
Part Contents
A Selected page number.
B Broadcasting channel identity.
C Current page number or search indications.
D Date and time.
E Text.
F Status information.
FASTEXT information.
➢
It can be different from depending on TTX source.
➢
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a colored heading (FASTEXT system)
Teletext Feature (depending on the model)
You can display Teletext information at any time on your television.
☛
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1 Select the channel providing the Teletext service using the
( ) or ( )
button.
2 Press the TTX/MIX ( ) button to activate the teletext mode.
Result
:
The contents page is displayed. It can be redisplayed
at any time by pressing the (index) button.
3 If you wish to display the actual broadcast at the same time as
the teletext page, press the
TTX/MIX ( ) button.
4 Press the TV ( ) button to exit from the teletext display.
Displaying the Teletext Information (depending on the model)
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 38
39
ENG
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1 Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result
: The current page counter is incremented and the
page is then displayed.
2 If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the (hold). Press the (hold) again to
resume.
Using the various display options:
To display... Press the...
◆ Both teletext information and TTX/MIX ()
the normal broadcast twice
◆ Hidden text (reveal)
(answers to quiz games, for example)
◆ The normal screen (reveal) again
◆ A secondary page, (sub-page)
by entering its 4-digit number
◆ The next page (page up)
◆ The previous page (page down)
◆ Double-size letters in the: (size)
• Upper half of the screen • Once
• Lower half of the screen • Twice
◆ Normal screen • Three times
Selecting a Page by Number (depending on the model)
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 39
40
ENG
You can store up to four teletext pages to display them later at
leisure.
1 Select the LIST mode using the button.
Result
: Four 3-digit numbers are displayed in different
colours.
➣
The button is used to switch between the LIST and
FLOF modes.
2 Press the colored button corresponding to the page that will be
replaced.
3 Enter the new page number using the numeric buttons.
4 Repeat steps 2 and 3 for each page to be stored, using a
different colored button each time.
5 Press the (store) button until the corresponding blocks blink.
Using FLOF to Select a Page (depending on the model)
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1 Display the teletext contents page by pressing the TTX/MIX
( ) button.
2 Press the colored button corresponding to the topic that you wish
to select;the available topics are given on the status line.
Result
:
The page is displayed with other colored information
that can be selected in the same way.
3 To display the previous or next page, press the corresponding
colored button.
4 To display the subpage, see the following steps.
◆
Press the (sub-page) button.
Result
: The available subpages appear.
◆
Select the required sub-page. Sub-pages can be scrolled by
using the
TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages (depending on the model)
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 40
41
ENG
Connecting to the AV-1 or 2 Input/Outputs
➢
AV-1 is used for equipment with an RGB output, such as video game
devices and video disc players or a VCR.
Rear of TV
Video disc player
Decoder/
Video game device
VCR
Camcorder
or
Satellite receiver
AV cable
➢
These figures show typical connector-jack panels. The actual
configuration on your TV may be different, depending on your model.
or
Connecting to the S-VIDEO Input (depending on the model)
➢
The S-VIDEO/RCA (AUDIO-L and R) connectors are used for equipment
with an S-Video output, such as a camcorder or VCR.
Side of TV Front of TV
VCR
Camcorder
and
➢
When both the side AV and rear connectors are connected to
external equipment, the side (or front) AV receives priority.
☛
Whenever you connect an audio or video system to your television,
ensure that all
elements are switched off.
Refer to the documentation supplied with your equipment for
detailed connection instructions and associated safety precautions.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 41
(
)
MONO
L-AUDIO-R
MONITOR
-OUT
INPUT 2
INPUT 1
VIDEO
2
1
RGB
42
ENG
Connecting to the Audio Output (depending on the model)
Connecting to the DVD Input (depending on the model)
➢
The “MONITOR OUT” (L-AUDIO-R) connectors are used for equipment, such as an audio
system (to take full advantage of the Surround sound effect).
Audio system
Rear of the TV
Connecting to the RCA Input (depending on the model)
➢
The Component/RCA (AUDIO-L and R) connectors are used for equipment with a DVD output.
DVD
Rear of TV
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Side of the TV
Camcorder
Video game device
Video disc player
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 42
43
ENG
You can connect a set of headphones to your television if you wish
to watch a television programme without disturbing the other
people in the room.
1 Plug a set of headphones into the 3.5 mm mini-jack socket of the
television.
Result
: The sound is heard through the headphones.
2 When you wish to hear the sound through the speakers again,
simply disconnect the headphones.
➢
Prolonged use of headphones at a high volume may
damage your hearing.
Connecting Headphones (depending on the model)
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1 Check that all the necessary connections have been made.
2 Switch your television on, then press the VIDEO
()
button
repeatedly.
Result
: The input sources are displayed in the following
order:
◆
AV1 AV2 S-VIDEO (option)
Component (option) - (RCA model)
◆
AV1 AV2 S-VIDEO (option) - (SCART model)
➢
Depending on the source selected, the pictures may appear
automatically.
➢
To watch television programmes again, press the TV()
button and select the number of the channel required.
Viewing Pictures From External Sources (depending on the model)
Side of the TV
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 43
44
ENG
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture,
distorted sound
Remote control malfunctions
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the volume MUTE ( ) button on the remote control
has been pressed.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
Automatic Degaussing to Remove Colour Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER ” button on the remote control.
☛ If your television will be left unattended, press the “” (On/Off) button to turn your
television off.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 44
45
ENG
Memo
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 45
46
Memo
ENG
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 46
47
Memo
ENG
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 47
AA68-03415A-00
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
KS7A(03415A)ENG_asia_TM75 3/19/04 11:21 AM Page 48
ELECTRONICS
Loading...