Samsung CS-29Z50M1, CS-29Z45M5, CS-29A750J2, CS-29Z58M1, CS-29B850F1 User Manual

...

COLOUR TELEVISION

CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57 CS29Z58 / CS29A730 / CS29A760 / CS29A750

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

www.samsung.com/global/register

Connection Panel (depending on the model)

The actual configuration of your TV may be different,

➢

depending on your model.

Rear Panel

Connecting to the RCA Output

The RCA2 connectors are used for equipment, such as a recording VCR or audio system.

Connecting to the RCA Input

The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the The RCA

connectors are used for equipment such as a

AUDIO-L input connector.)

DVD with component output.

Front (or Side) Panel

Control Panel (depending on the model)

The actual configuration of your TV may be different,

➢

depending on your model.

Front (or Side) Panel

On-screen menu display

Volume adjustment

Channel selection

Remote control sensor

Standby indicator

Power on/off

 You can use the 3 buttons to switch the TV on when it is

in standby mode depending on the model.

 The 2 and 3 buttons also have the same function as

the ◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

cable television network

COMPONENT IN

(480i/480p/576i/576p/� 720p/1080i/1080p)

OUT

IN 2

IN 1

VIDEO

AV IN / OUT

L - AUDIO - R

cable television network

Whenever you connect an audio or video system to your

☛

television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1 (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

1 S-Video input

2 Video input

3 Audio input

Please be sure to match the colour coded input terminals

☛

and cable jacks.

Connecting to the RCA Input

The 3 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

Connecting to the S-Video Input

The 1 (S-VIDEO input) and 2 (VIDEO input) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.

When both the front (or side) AV and rear connectors are



➢

connected to external equipment, the front (or side) AV receives priority.

English - 1

AA68-03967L-00

Remote Control

MUTE

-/--

LNA

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

(depending on the model)

Used to increase or decrease the volume.

MENU Used to display the onscreen menu or return to the previous menu.

▲/▼/◄/► Used to control the cursor in the menu.

S.MENU Used to display the sound menu.

TURBO Used to select the turbo sound option.

DUAL I-II

Used to select the sound mode.

SOURCE Used to display all of the available video sources.

INFO Used to view the channel information and setting status you selected.

PRE-CH Used to switch repeatedly between the last two channels displayed.

P / Used to display the

next or previous stored channel.

EXIT Used to exit from any display or return to normal viewing.

MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or button.

ENTER While using the onscreen menus, press the ENTER button to activate (or change) a particular item.

S.MODE

Used to select the sound effect.

P.MODE Used to select the picture effect.

(

TV Used to return to the TV mode when it is in external input mode.

)

EZ.VIEW Used to display Channel Grouping, Channel Minimizer, Channel Schedule, Music Mode, Half Mute menu.

Switching the Television On and Off

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the

➢

television and the frequency is 50 or 60Hz.

2 Press the “I” button (On/Off) on the front (or side) of the

television.

3 Press the

switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” on page 3 or “Channel Manual Store” on page 3.

➢

4 To switch the television off, press the “I” button (On/Off)

on the front (or side) of the television.

POWER button on the remote control to

If the television is initially powered on, several basic



customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER button on the remote control while

viewing. The television is in standby mode.

2 To switch the television back on, simply press it again.

1 POWER Used to switch the TV on and off.

2 Numeric buttons Used to select channels directly.

-/--

Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “-” ends of the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 2

Do not leave the television in standby mode for long

☛

periods of time (when you are away on holiday, for example). Turn the television off by pressing the “ button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

I”

English - 3

Viewing the Menus

Channel - Auto Store

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.

Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the

▲/▼/◄/► button to change the selected items. Press the MENU button to return to the previous menu.

5 Press the

EXIT button to exit from the menu.

Setup - Plug & Play

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in standby

mode, press the POWER button on the remote control. The Start Plug & Play is displayed. To start Plug & Play, press the ENTER button. The Language menu is displayed.

The Language menu

➢

will automatically appear after several seconds, even if the

ENTER

button is not pressed.

2 Select the appropriated

language by pressing the

▲ or ▼ button. Press the

ENTER button. The Check antenna input. is displayed.

If any language is not selected, the language menu

➢

will disappear about 30 seconds later.

3 Make sure that the antenna

is connected to the television (refer to page 1). Press the ENTER button. The Area menu is displayed.

continued...

Start Plug & Play.

Enter

Language

English

Indonesia Melayu

Move

Check antenna input.

Enter

Area

Asia/W.Europe

CIS/E.Europe China Hong Kong/UK Australia NZL/Indonesia

Move

Plug & Play

Enter

Plug & Play

Enter

Return

Skip

South Africa America

Skip

4 Press the ▲ or ▼ button to select your area. Press the

ENTER button.

5 To search the channels,

press the

ENTER button. To

Plug & Play

Auto Store

stop the search, press the ENTER button. When the channel searching has finished, the

Clock Set

menu is displayed.

6 Press the ◄ or ► button to

move to the hour or minute. Set the hour or minute by

pressing the ▲ or ▼ button.

7 When you have finished,

press the

MENU button. The Enjoy your watching. is displayed, and then the channel which has been stored will be activated.

Re-setting the Plug & Play

Method: MENU ➜ ▲/▼ (Setup) ➜ ENTER ➜ ▲/▼ (Plug & Play) ➜ ENTER

Auto Store

P 1 C-- 102MHz 7 %

Clock Set 1 1 : 0 0 am

Start

Enter

Plug & Play

Stop

Enter

Plug & Play

Move Adjust

Enjoy your watching.

Plug & Play

Language : English Time Child Lock Blue Screen : On Melody : On Music Mode : Off

Move

Enter

Enter Skip

Skip

Setup

Return

Input (depending on the model) - Source List

Enter

Source List

Return

Source List

◆

You can switch between

viewing signal from connected equipment,

AV1 AV2 S-Video Component

such as a VCR, DVD, settop box, and the TV source (broadcast or cable).

You can change the required external source simply

➢

by pressing the SOURCE button on the remote

Move

control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control.

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

Channels are sorted and stored in the order which reflects their position in the frequency range (with lowest first and highest last). The programme originally selected is then displayed.

To stop the search before

➢

it has finished, press the ENTER button.

When finished, the

Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to

Area : Belgie

Move

P 1 C-- 102MHz 7 %

Enter

Asia/W.Europe

CIS/E.Europe China Hong Kong/UK Australia NZL/Indonesia South Africa America

Enter

Stop

Return

Auto Store

Return

“Channel - Sort”. To exit without sorting, press the

EXIT button.

Channel - Sort



     

This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store.

From: Channel number to

◆

Move

From : P 1

To : P-Store : ?

Adjust

be changed. To: New channel number to be identified.

◆

Store: Confirmation the exchange of channel numbers.

◆

Sort

Return

Channel - Manual Store

Manual Store

You can store channels, including those received via cable networks. When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish to identify.

Programme : P 3

Colour System : AUTO Sound System : BG Search : 46MHz Channel : C 4 Store : ?

Move

Adjust

continued...

Return

 

+ 5 hidden pages