Samsung CS-53380TPS, CS-53210TPS, CS-29M6PQ, CS-63970TPS/HA, CS-63900PF/HAC User Manual

...

COLOUR TELEVISION

CS29M6/CS29M20/CS29M16/ CS29K3/CS29K5/CS29K10/ CS29A11/CS25M6/CS25M20/ CS25K10/CS25A11/CS21T10/ CS21T20/CS21A11/CS21M7/ CS21M20/CS21S8

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PICTURE IN PICTURE

DNIe Jr

(Digital Natural Image engine Junior)

TELETEXT (OPTION)

Contents

◆ CONNECTING AND PREPARING YOUR TELEVISION

■ Control Panels (depending on the model)..................................................... 5

■ Connection Panels (depending on the model) .............................................. 6

■ Infrared Remote Control ................................................................................ 8

■ Inserting the Batteries in the Remote Control................................................ 9

■ Connecting to an Aerial or Cable Television Network ................................... 10

■ Switching Your Television On and Off........................................................... 11

■ Placing Your Television in Standby Mode ..................................................... 11

■ Becoming Familiar with the Remote Control ................................................. 12

■ Plug & Play Feature (depending on the model)............................................. 13

■ Viewing the Demonstration............................................................................ 14

■ Choosing Your Language.............................................................................. 14

◆ SETTING THE CHANNELS

■ Storing Channels Automatically..................................................................... 15

■ Storing Channels Manually............................................................................ 16

■ Skipping Unwanted Channels ....................................................................... 18

■ Sorting the Stored Channels ......................................................................... 19

ENG

◆ USING YOUR TELEVISION

■ Changing the Picture Standard ..................................................................... 20

■ Adjusting the Picture Settings........................................................................ 21

■ Selecting the Picture Size.............................................................................. 22

■ Extra Picture Settings .................................................................................... 23

■ Using the Tilt Control Feature (depending on the model).............................. 24

■ Setting the Blue Screen................................................................................. 24

■ Changing the Sound Standard ...................................................................... 25

■ Adjusting the Sound Settings ........................................................................ 26

■ Extra Sound Settings (depending on the model)........................................... 27

■ Selecting the Melody ..................................................................................... 28

■ Selecting the Sound Mode (depending on the model) .................................. 29

■ Setting and Displaying the Current Time....................................................... 30

■ Setting the Sleep Timer ................................................................................. 31

■ Switching the Television On and Off Automatically ....................................... 32

■ Setting the Preferred Volume Level............................................................... 33

■ Using the LNA (Low Noise Amplifier) feature (depending on the model) ...... 34

■ Activating the Child Lock ............................................................................... 35

■ Viewing an External Signal Source (depending on the model) ..................... 36

■ Viewing the Picture In Picture (PIP) (depending on the model) .................... 37

ENG

Contents (continued)

◆ USING THE TELETEXT FEATURE (depending on the model)

■ Teletext Feature (depending on the model) .................................................. 40

■ Displaying the Teletext Information (depending on the model) ..................... 40

■ Selecting a Page by Number (depending on the model)............................... 41

■ Using FLOF to Select a Page (depending on the model).............................. 42

■ Storing Teletext Pages (depending on the model) ........................................ 42

◆ ADDITIONAL INFORMATION ON CONNECTIONS

■ Connecting to the AV-1 or 2 Input/Outputs.................................................... 43

■ Connecting to the S-VIDEO Input (depending on the model)........................ 43

■ Connecting to the DVD Input (depending on the model)............................... 44

■ Connecting to the RCA Input (depending on the model)............................... 44

■ Connecting to the Audio Output (depending on the model) .......................... 44

■ Connecting Headphones (depending on the model)..................................... 45

■ Viewing Pictures From External Sources (depending on the model) ............ 45

◆ RECOMMENDATIONS FOR USE

■ Automatic Degaussing to Remove Colour Patches....................................... 46

■ Troubleshooting: Before Contacting Service Personnel................................ 46

Symbols

Press Important Note

☛

➢

Control Panels (depending on the model)

The actual configuration on your TV may be different, depending on

➢

your model.

Front of the TV

ENG

1) Input source selection

2) Menu display

3) Volume adjustment

4) Channel selection

Using the Buttons on the Panel

➢

If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:

◆

Switch on the TV when it is in Standby mode and select channels ( ▼ CH ▲ or CH ).

◆

Access the menu ( MENU ).

◆

Adjust the volume ( - VOL+).

◆

Switch among Video input modes ( TV/VIDEO ).

5) Remote control sensor

6) Standby indicator

7) Power On/Off

ENG

Connection Panels (depending on the model)

This figure shows the Standard Connector-jack panel.

➢

The actual configuration on your TV may be different, depending on the model.

Side of TV Front of TV

Œ CONNECTING EXTERNAL A/V DEVICES (INPUT)

The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc players and some video game devices.

◆ When both the side (or front) and rear connectors are connected to external equipment,

➢

the side (or front) AV has the priority.

◆ When using the mono equipment such as camcorders, video disc players and some video game devices, connect to the “AUDIO-L” input connector.

´ CONNECTING EXTERNAL S-VIDEO DEVICES (INPUT) (Option)

Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR.

ˇ CONNECTING HEADPHONES (Option)

You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room.

Prolonged use of headphones at a high volume may damage your hearing.

Whenever you connect an audio or video system to your

☛

television, ensure that all

Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

elements are switched off.

Connection Panels (depending on the model) (continued)

Rear of TV

ENG

MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices.

´ AV 1 (VCR) -VIDEO/AUDIO(L/R)

AV 2 (VCR) -VIDEO/L-AUDIO-R

Inputs or outputs for external devices, such as VCR,DVD, video game device or video disc players.

ˇ COMPONENT (DVD)

VIDEO (Y/Pb/Pr) and AUDIO (L/R) inputs for Component.

Available format for Component Inputs : 480i

➢

When using the mono equipment such as camcorders, video disc players and some video

➢

game device, connect to the “AUDIO-L” input connector.

¨ VHF/UHF (75Ω)

75Ω Coaxial connector for Aerial/ Cable Network.

ˆ / (SCART)

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

ENG

Infrared Remote Control

TELEVISION STAND-BY

TELETEXT SIZE SELECTION

SOUND MODE SELECTION/

DIRECT CHANNEL SELECTION

PICTURE SIZE/

TELETEXT SUB-PAGE

TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST

AUTOMATIC SWITCH-OFF/ TELETEXT STORE

ONE/TWO-DIGIT CHANNEL

TELETEXT PAGE HOLD

TEMPORARY SOUND SWITCH-OFF

TUNER/CABLE NETWORK

PROGRAMME SELECTION BY NAME

MOVE TO THE REQUIRED MENU

ADJUST AN OPTION VALUE

SOUND MENU DISPLAY

FASTEXT TOPIC SELECTION

SELECTION/

VOLUME INCREASE

VOLUME DECREASE

SELECTION

MENU DISPLAY/

OPTION/

RESPECTIVELY

TURBO SOUND

SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED

NEXT CHANNEL/ TELETEXT NEXT PAGE

EXTERNAL INPUT SELECTION/ TELETEXT MODE SELECTION (LIST/FLOF)

PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE

INFORMATION DISPLAY/ TELETEXT REVEAL

EXIT FROM ANY DISPLAY

CHANGE CONFIRMATION

SOUND EFFECT SELECTION

PICTURE EFFECT SELECTION

PIP FUNCTIONS (OPTION);

- PIP ON/OFF

- STILL

- INTERCHANGE THE MAIN AND SUB PICTURE (SWAP)

- SOURCE SELECTION (TV/VIDEO)

- SIZE SELECTION (SIZE)

- LOCATION SELECTION (POSITION)

- CHANNEL SELECTION (P / )

The performance of the remote control may be affected by bright light.

➢

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆ Purchase the television

◆ Find that the remote control is no longer operating

correctly

1 Remove the cover on the rear of the remote control by pressing

the symbol

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking

care to respect the polarities:

◆-on the battery against -on the remote control

◆+on the battery against +on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pressing it back into place.

()

downwards and then pulling firmly to remove it.

ENG

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

◆ A satellite network

Rear of the TV

P 4

Cable Television

Network

Mono

1 In the first three cases, connect the aerial or network input cable to

the 75Ω coaxial socket on the rear of the television.

2 If you are using an indoor aerial, you may need to turn it when

tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to:

◆ “Storing Channels Automatically” on page 15.

◆ “Storing Channels Manually” on page 16.

Signal Strength( ) display (Option)

➢

The “ ”(Signal Strength) symbol is displayed by pressing the “INFO ( )” button. This symbol displays signal strength for your watching TV channel. The more signal bar is the better TV gets sensitivity on current channel.

Switching Your Television On and Off

The mains lead is attached to the rear of your television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television

➢

and the frequency is 50 or 60Hz.

2 Press the “ ” button (On/Off) on the front of the television.

Result

: The Standby indicator on the front of the television

lights up.

3 Press the POWER ( ) button on the remote control to switch the

television on.

Result

: The programme that you were watching last is re-

selected automatically.

If you have not yet stored any channels, No clear picture

➢

appears. Refer to “Storing Channels Automatically” on page 15 or “Storing Channels Manually” on page 16.

4 To switch your television off, press the “ ” button (On/Off) again.

ENG

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce:

◆ Power consumption

◆ Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER ( ) button on the remote control.

Result

: The screen is turned off and the Standby indicator on

the front of the television lights up in red.

2 To switch the television back on, simply press the POWER ()

button again.

You can also switch on by pressing the P or button.

➢

Do not leave your television in Standby mode for long

☛

periods of time (when you are away on holiday, for example). Turn your television off by pressing the “” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.

ENG

Becoming Familiar with the Remote Control

The remote control is used mainly to:

◆ Change channels and adjust the volume

◆ Set up the television using the on-screen menu system

The following table presents the most frequently used buttons and their functions.

Button Viewing Function Menu Function

Used to display the next stored channel.

Used to display the previous stored channel.

to Used to display the corresponding channels.

-/--

PRE-CH Press the PRE-CH button. The TV will switch to the last

MUTE Used to switch the sound off temporarily.

MENU Used to display the Used to return to the previous

Used to select a channel numbered ten or over. Press this button, and the “ Enter the two-digit channel number.

channel viewed. To quickly switch between two channels that are far apart,

tune to one channel, then use the number button to select second channel. Then, use the PRE-CH button to quickly alternate between them.

Used to increase the volume.

Used to decrease the volume.

To turn the sound back on, press this button again, or

➢

press the or button.

on-screen menu system. menu or normal viewing.

” symbol is displayed.

EXIT

TV ◆ Used to return the TV

mode when it is in external input mode.

Used to:

◆ Display a submenu containing selections for the current menu option

◆ Increase/decrease a menu option value

Used to confirm your choice.

Used to exit from the menu system and return to normal viewing directly.

Plug & Play Feature (depending on the model)

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

ENG

Plug & Play

1 If the television is in Standby mode, press the POWER ( ) button

on the remote control.

Result

: The message Plug & Play is displayed. It flickers for

a little while and then

Language menu is automatically

displayed.

2 Select the appropriate language by pressing the ▼ or ▲ button.

Press the

Result

➢

ENTER ( ) button to enter the language.

: The message Check antenna input. is displayed.

If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.

3 Make sure that the antenna is connected to the TV.

Press the

Result

ENTER ( ) button.

: The Auto Store menu is displayed with Area is

selected.

4 Press the ENTER ( ) button again. Select your area by pressing

the

▼ or ▲ button, and then Press the ENTER ( ) button.

To search the channels, select

Search by pressing the ▼ or ▲

button, and then press the ENTER ( ) button. Press the Press the

Result

➢

ENTER ( ) button again to start search the channels. MENU ( ) button to stop the search.

: The Time menu is displayed with Clock is selected.

Refer to “Storing Channels Automatically” on page 15.

5 Press the œ or √ button to move to the hour or minute. Set the

hour or minute by pressing the

Refer to “Setting and Displaying the Current Time” on page

➢

30.

▼ or ▲ button.

6 When you have finished, press the MENU ( ) button.

Result

: The message Enjoy your watching is displayed,

and then the channel which has been stored will be activated.

7 If you want to reset this feature...

Language

English

Français

Türkçe

Move Enter

Check antenna input.

Enter Exit

Area : ASIA W/EUROPE

Move Enter Return

Clock -- : -- am

Sleep Timer : Off

On Timer -- : -- am Off

Off Timer -- : -- am Off

On Timer Volume : 10

Move Enter Return

Auto Store

Start

Enter Return

Time

√√ √√

1 Press the MENU ( ) button.

2 Press the ▼ or ▲ button to select Setup, and then press the

ENTER ( ) button.

Result

: The Plug & Play is selected.

3 Press the ENTER ( ) button again.

Result

: This feature starts with the message

Plug & Play

is displayed.

Enjoy your watching

Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration

Move Enter Return

Setup

√√

√√ √√ √√ √√ √√

ENG

Viewing the Demonstration

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

To become familiar with the various menus provided by your television, you can view the in built demonstration.

√√

√√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Demonstration.

5 Press the ENTER ( ) button.

Result

: Each of the menu options is displayed in turn.

When you wish to exit from the demonstration, press the

➢

EXIT ( ) button on the remote control.

Choosing Your Language

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

√√

√√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the

Setup group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Language.

5 Select the appropriate language by pressing the ENTER ()

button repeatedly.

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

Auto Store Manual Store Add/Delete Sort LNA : Off

ENG

Channel

√√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER ( ) button.

Result

: The Auto Store is selected.

4 Press the ENTER ( ) button again.

Result

: The options available in the Auto Store group are

displayed with

Area is selected.

5 Press the ENTER ( ) button again.

6 Select your area by pressing the ▼ or ▲ button, then press the

ENTER ( ) button.

The areas are displayed in the following order:

ASIA W/EUROPE-CIS E/EUROPE-CHINA-HONGKONG U/K

AUSTRALIA-NZ/INDONESIA-SOUTH AFRICA-AMERICA

7 Press the ▼ or ▲ button to select Search, then press the ENTER

( ) button.

8 Press the ENTER ( ) button to start the search.

Result

: The horizontal bar is displayed, and then channels are

stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.

To stop the search before it has finished, press the MENU

➢

( ) button.

9 When searching and storing are complete, the Sort menu is

displayed.

◆

To sort the stored channels into the desired numerical order, go to Step on page 19.

◆

To exit from the channel store function without sorting the channels, press the menus disappear.

6 of the “Sorting the Stored Channels” procedure

MENU ( ) button repeatedly until the

Move Enter Return

Area : ASIA W/EUROPE

Move Enter Return

Area : ASIA W/EUROPE

Move Enter Return

P1 102 MHZ

From : P 1

To : P--

Store : ?

Auto Store

ASIA W/EUROPE

CIS E/EUROPE CHINA HONGKONG U/K AUSTRALIA NZ/INDONESIA SOUTH AFRICA AMERICA

Auto Store

Start

Enter Return

Stop

Enter Return

Sort

√√

√√ √√

10 When the channels have been stored, you can:

◆

Sort them in the order required (refer to page 19)

◆

Clear a channel (refer to page 18)

◆

Activate the Digital Noise Reduction feature (refer to page 23)

Move Adjust Return

ENG

Storing Channels Manually

Auto Store Manual Store Add/Delete Sort LNA : Off

Move Enter Return

Channel

You can store the channels, including those received via cable

√√ √√ √√ √√ √√

networks.

When storing channels manually, you can choose:

◆ Whether or not to store each of the channels found

◆ The programme number of each stored channel which

you wish to identify

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Adjust Return

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Enter Return

Programme : P 3

Color System : Auto

Sound System : BG

Search : 46MHz

Channel : P 1

Store : ?

Move Enter Return

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Enter Return

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Enter Return

Manual Store

AUTO

PAL SECAM NT4.43 NT3.58

Manual Store

DK I M

1 Press the MENU ( ) button.

Result

√√ √√

2 Press the ▼ or ▲ button to select Channel.

: The main menu is displayed.

3 Press the ENTER ( ) button.

Result

: The options available in the Channel group are

displayed.

4 Press the ▼ or ▲ button to select Manual Store.

√√ √√

5 Press the ENTER ( ) button.

6 To assign a programme number to a channel, press the œ or √

button.

7 Press the ▼ or ▲ button to select Color system.

8 Press the ENTER ( ) button.

9 Press the ▼ or ▲ button to select the broadcasting standards.

√√

Result

: The color standards are displayed in the following

order: AUTO-PAL-SECAM-NT4.43-NT3.58.

10 Press the ENTER ( ) button.

11 Press the ▼ or ▲ button to select Sound System .

12 Press the ENTER ( ) button.

√√ √√

13 Press the ▼ or ▲ button to select the sound standards.

Result

: The sound standards are displayed in the following

order:

BG-DK-I-M.

14 Press the ENTER ( ) button.

√√

Storing Channels Manually (continued)

ENG

15 If you do not know the channel numbers, select Search by

pressing the search.

Result

▼ or ▲ button. Press the œ or √ button to start the

: The tuner scans the frequency range until the first

channel or the channel that you selected is received on your screen.

16 If you know the number of the channel to be stored, see the

following steps.

◆

Press the ▼ or ▲ button to select Channel.

◆

Press the √ button.

◆

Press the ▼ or ▲ button to select C (Air channel) or S (Cable channel).

◆

Press the √ button.

◆

Press the ▼ or ▲ button to select indicate the required number.

You can also select the channel number directly by

➢

pressing the numeric buttons (0~9).

◆

Press the ENTER ( ) button to select the required number.

If no sound or abnormal sound, re-select the sound standard

➢

required.

17 To store the channel and associated programme number, select

Store by pressing the ▼ or ▲ button. Press the ENTER () button to select

OK.

18 Repeat Steps 16 to 17 for each channel to be stored.

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Search Return

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Enter Return

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Enter Return

Manual Store

√√ √√

Channel mode

☛

◆ P (Programme mode):

broadcasting stations in your area have been assigned to position numbers from P00 to max P99. You can select a channel by entering the position number in this mode.

◆ C (Real channel mode):

entering the assigned number to each air broadcasting station in this mode.

◆ S (Cable channel mode):

entering the assigned number for each cable channel in this mode.

When completing tuning, the

You can select a channel by

ENG

Skipping Unwanted Channels

Auto Store Manual Store Add/Delete Sort LNA : Off

Move Enter Return

Channel

You can exclude the channels you chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed.

√√ √√ √√ √√ √√

All of the channels that you do not specifically choose to skip are displayed during scanning.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

P 1 : Added

P 2 : Added

P 3 : Added

P 4 : Added

Move Enter Return

P 1 : Deleted

P 2 : Added

P 3 : Added

P 4 : Added

Move Enter Return

Add/Delete

2 Press the ▼ or ▲ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Add/Delete.

5 Press the ENTER ( ) button.

Result

The stored channels are displayed.

6 Press the ▼ or ▲ button to select the channel to add or erase.

If necessary, select ( ) button.

Added or Deleted by pressing the ENTER

7 Repeat Step 6 for each channel to be added or erased.

Sorting the Stored Channels

This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

Auto Store Manual Store Add/Delete Sort LNA : Off

ENG

Channel

√√ √√ √√ √√ √√

2 Press the ▼ or ▲ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Sort.

5 Press the ENTER ( ) button.

Result

: The options available in the Sort group are displayed

with

From is selected.

6 Select the channel number that you wish to change by pressing

the

œ or √ button repeatedly.

7 Press the ▼ or ▲ button to select To. Select the new channel

number which you wish to identify by pressing the repeatedly.

You can also select the channel number directly by pressing

➢

the numeric buttons (0~9).

œ or √ button

8 Press the ▼ or ▲ button to select Store. Select OK to confirm the

exchange of channel numbers by pressing the button.

Result

The selected channel is exchanged with the one previously stored to the chosen number.

ENTER ()

9 For all the channels to move to the required channel numbers,

repeat steps button.

6 to 8 after selecting the From by pressing the ▼ or ▲

Move Enter Return

From : P 1

To : P--

Store : ?

Move Adjust Return

From : P 1

To : P 3

Store : ?

Move Adjust Return

From : P 3

To : P 1

Store : OK

Sort

Move Enter Return

ENG

Changing the Picture Standard

Mode : Dynamic Custom Color Tone : Normal Size : Normal Digital NR : Off DNIe Jr : On

††

Move Enter Return

Picture

You can select the type of picture which best corresponds to your viewing requirements.

√√ √√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Picture.

Result

: The options available in the Picture group are

displayed.

Mode : Dynamic

Custom Color Tone : Normal Size : Normal Digital NR : Off DNIe Jr : On

††

Move Enter Return

Picture

Dynamic

Standard Movie Custom

3 Press the ENTER ( ) button.

√√

√√ √√ √√ √√ √√

4 Press the ENTER ( ) button again to select Mode.

Result

: The options available in the Mode group are displayed.

5 Press the ▼ or ▲ button to select picture mode.

Result

: The following picture effects are available:

Dynamic-Standard-Movie-Custom.

6 Press the ENTER ( ) button.

You can also set these options simply by pressing the

➢

P.MODE (

Picture Mode) button.

Adjusting the Picture Settings

Your television has several settings which allow you to control picture quality.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Picture.

Result

: The options available in the Picture group are

displayed.

Mode : Dynamic Custom Color Tone : Normal Size : Normal Digital NR : Off DNIe Jr : On

††

Move Enter Return

Picture

ENG

√√ √√ √√ √√ √√ √√

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Custom.

5 Press the ENTER ( ) button.

Result

: The options available in the Custom group are

displayed.

6 Press the ▼ or ▲ button to select the option (Contrast,

Brightness, Sharpness, Color or Tint-NTSC only) to be adjusted.

Press the

Result

ENTER ( ) button.

: The horizontal bar is displayed. Move the horizontal

bar’s cursor left or right by pressing the

œ or √

button.

7 Press the EXIT ( ) button.

Selecting the Color Tone

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Picture.

Result

: The options available in the Picture group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Color Tone.

5 Press the ENTER ( ) button.

6 Press the ▼ or ▲ button to select the required option (Cool2,

Cool1, Normal, Warm1 or Warm2).

Contrast : 100

Brightness : 45

Sharpness : 50

Color : 55

Move Enter Return

Contrast 100

Mode : Dynamic Custom Color Tone : Normal Size : Normal Digital NR : Off DNIe Jr : On

††

Move Enter Return

Mode : Dynamic Custom

Color Tone : Normal

Size : Normal Digital NR : Off DNIe Jr : On

††

Move Enter Return

Custom

Picture

Cool2 Cool1

Normal

Warm1 Warm2

√√ √√ √√ √√ √√ √√

√√ √√

√√

√√ √√ √√

7 Press the ENTER ( ) button.

◆ If you make any changes to these settings, the picture

➢

standard is automatically switched to

◆ The television has an “automatic degaussing” system that is activated if magnetic interference is present. To degauss the television screen, switch power off by pressing the “” (On/Off) button on the front panel. (Refer to “Automatic Degaussing to Remove Colour Patches” on page 46.)

Custom.

ENG

Selecting the Picture Size

Mode : Dynamic Custom Color Tone : Normal Size : Normal Digital NR : Off DNIe Jr : On

††

Move Enter Return

Mode : Dynamic Custom Color Tone : Normal

Size : Normal

Digital NR : Off DNIe Jr : On

††

Move Enter Return

Picture

Normal

Zoom

You can select the picture format which best corresponds to your viewing requirements. The following picture formats are available in the order given:

√√ √√ √√ √√ √√ √√

1 Press the MENU ( ) button.

◆ Normal, Zoom

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Picture.

Result

: The options available in the Picture group are

displayed.

√√ √√ √√

√√

√√ √√

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Size.

5 Press the ENTER ( ) button.

6 Press the ▼ or ▲ button to select the picture size (Normal or

Zoom).

7 Press the ENTER ( ) button.

You can select the required picture format by simply

➢

pressing the “P.SIZE( )”(Picture Size) button on the remote control.

Extra Picture Settings

◆ Digital NR

If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Picture.

Result

: The options available in the Picture group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Digital NR.

5 Press the ENTER ( ) button.

6 Press the ▼ or ▲ button to select On.

Mode : Dynamic Custom Color Tone : Normal Size : Normal Digital NR : Off DNIe Jr : On

††

Move Enter Return

Mode : Dynamic Custom Color Tone : Normal Size : Normal

Digital NR : Off

DNIe Jr : Off

††

Move Enter Return

Picture

Off

ENG

√√ √√ √√ √√ √√ √√

√√ √√ √√ √√

√√

7 Press the ENTER ( ) button.

◆ DNIe Jr

This feature bring you more detailed image with detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, much detailed image to you. signals into your eyes.

(Digital Natural Image engine Junior) (Option)

DNIe Jr technology will fit every

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Picture.

Result

: The options available in the Picture group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select DNIe Jr.

5 Press the ENTER ( ) button.

6 Press the œ or √ button to select On.

Mode : Dynamic Custom Color Tone : Normal Size : Normal Digital NR : Off DNIe Jr : On

††

Move Enter Return

DNIe Jr

On Off

Adjust Enter Return

Picture

√√ √√ √√ √√ √√ √√

7 Press the ENTER ( ) button.

ENG

Using the Tilt Control Feature (depending on the model)

……

More Tilt : 0 PIP

Move Adjust Return

Picture

If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting.

√√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Picture.

Result

: The options available in the Picture group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Tilt.

5 Press the œ or √ button to reach the required setting (-7 to +7).

Setting the Blue Screen

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Plug & Play Language : English Time Child Lock

Blue screen : Off

Melody : On Demonstration

Move Enter Return

Setup

Off

If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.

√√

√√ √√ √√ √√ √√

If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

√√

√√ √√

√√

√√ √√

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Blue screen.

5 Press the ENTER ( ) button.

6 Press the ▼ or ▲ button to select On.

7 Press the ENTER ( ) button.

Changing the Sound Standard

You can select the type of special sound effect to be used when watching a given broadcast.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Sound.

Result

: The options available in the Sound group are

displayed.

Mode : Standard Equalizer Auto Volume : Off Dolby Virtual : Off Pseudo Stereo : Off Turbo Plus : Off

Move Enter Return

Sound

ENG

√√ √√ √√ √√ √√ √√

3 Press the ENTER ( ) button.

4 Press the ENTER ( ) button again to select Mode.

Result

: The options available in the Mode group are displayed.

5 Press the ▼ or ▲ button to select sound mode.

Result

: The following sound effects are available:

Standard-Music-Movie-Speech(SVE)-Custom.

◆

SVE : SAMSUNG Voice Enhancement Technic

6 Press the ENTER ( ) button.

You can also set these options simply by pressing the

➢

S.MODE (

Sound Mode) button.

Mode : Standard

Equalizer Auto Volume : Off Dolby Virtual : Off Pseudo Stereo : Off Turbo Plus : Off

Move Enter Return

Sound

Standard

Music Movie Speech Custom

√√

√√ √√ √√ √√ √√

ENG

Adjusting the Sound Settings

The sound settings can be adjusted to suit your personal preferences.

Mode : Standard Equalizer Auto Volume : Off Dolby Virtual : Off Pseudo Stereo : Off Turbo Plus : Off

Move Enter Return

100 300 1K 3K 10K

Move Adjust Return

Sound

Equalizer

√√ √√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Sound.

Result

: The options available in the Sound group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Equalizer.

5 Press the ENTER ( ) button.

Result

: The options available in the Equalizer group are

displayed.

You can also display this group simply by pressing the

➢

S.MENU (Sound Menu) button.

6 Select the option to be adjusted by pressing the œ or √ button.

Press the

➢

▼ or ▲ button to reach the required setting.

If you make any changes to these settings, the sound standard is automatically switched to

Custom.

Extra Sound Settings (depending on the model)

◆ Auto Volume

Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

◆ Pseudo Stereo / Dolby Virtual

Pseudo stereo/Dolby Virtual (Option) feature converts a monaural sound signal into two identical left and right channels.

Once the to as

Pseudo stereo/Dolby Virtual (Option) is set On or Off, these settings apply to the sound effects such Standard, Music, Movie, and Speech(SVE).

◆ Turbo Plus

This feature suitably emphasizes both higher and lower bands of sound (and includes other effects). You can enjoy more magnificent and dynamic sound when watching music, movie or other channels.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Sound.

Result

: The options available in the Sound group are

displayed.

3 Press the ENTER ( ) button.

4 Select the required option (Auto Volume, Dolby Virtual,

Pseudo Stereo or Turbo Plus) by pressing the ▼ or ▲ button. Press the

➢

ENTER ( ) button.

You can select the turbo sound feature simply by pressing the

TURBO button.

5 To activate each feature, select On by pressing the ▼ or ▲ button.

6 Press the ENTER ( ) button.

Manufactured under license from

➢

Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

(Option)

Mode : Standard Equalizer Auto Volume : On Dolby Virtual : Off Pseudo Stereo : Off Turbo Plus : Off

Move Enter Return

Mode : Standard Equalizer Auto Volume : Off Dolby Virtual : On Pseudo Stereo : Off Turbo Plus : Off

Move Enter Return

Mode : Standard Equalizer Auto Volume : Off Dolby Virtual : Off Pseudo Stereo : On Turbo Plus : Off

Move Enter Return

Mode : Standard Equalizer Auto Volume : Off Dolby Virtual : Off Pseudo Stereo : Off Turbo Plus : On

Move Enter Return

Mode : Standard Equalizer

Auto Volume : On

Dolby Virtual : Off Pseudo Stereo : Off Turbo Plus : Off

Move Enter Return

Sound

Off

ENG

√√ √√ √√ √√ √√ √√

√√ √√

√√

√√ √√ √√

ENG

Selecting the Melody

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

You can hear clear melody sound when the television is powered on or off.

√√

√√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

Plug & Play Language : English Time Child Lock Blue screen : Off

Melody : On

Demonstration

Move Enter Return

Setup

Off

3 Press the ENTER ( ) button.

√√

√√ √√ √√

√√

4 Press the ▼ or ▲ button to select Melody.

5 Press the ENTER ( ) button.

6 Press the ▼ or ▲ button to select On (activating) or Off .

7 Press the ENTER ( ) button.

Selecting the Sound Mode (depending on the model)

The “DUAL of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission.

I-II”

button displays/controls the processing and output

ENG

Type of broadcast

Regular broadcast

(Standard audio)

Regular +

NICAM

Stereo

◆ If the receiving conditions deteriorate, listening will be

➣

◆ If the stereo signal is weak and an automatic switching

◆ When receiving a mono sound in the AV mode, connect

NICAM Mono

NICAM Stereo

NICAM Dual-I/II

Regular broadcast

(Standard audio)

Bilingual or Dual-I/II

Stereo

easier if the mode is set to the

occurs, then switch to the

to the “AUDIO-L” input connector on the panel (front or side). If the mono sound comes out only from left speaker, press the

DUAL

On-screen indication

(Normal use)

Mono

Mono ↔ Mono

NICAM (Normal)

Stereo ↔ Mono

NICAM (Normal)

Dual-I → Dual-II → Mono

NICAM NICAM (Normal)

→

Mono (Normal use)

DUAL-I ↔ DUAL-II

Stereo ↔ Mono

Mono.

I-II

button.

→

(Forced mono)

ENG

Setting and Displaying the Current Time

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

You can set the television’s clock so that the current time is displayed by pressing the “INFO

()

” button. You must also set the time if

you wish to use the automatic on or off timers.

√√

When pressing the “” button (On/Off) on the front of

√√ √√ √√ √√ √√

➢

the television, the clock setting will be reset.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

Clock -- : -- am

Sleep Timer : Off

On Timer -- : -- am Off

Off Timer -- : -- am Off

On Timer Volume : 10

Move Enter Return

TV Time

Clock 11 : 00 am

Sleep Timer : Off

On Timer -- : -- am Off

Off Timer -- : -- am Off

On Timer Volume : 10

Move Adjust Return

Time

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Time.

5 Press the ENTER ( ) button.

Result

: The Time is selected.

6 Press the ENTER ( ) button again.

Result

: The Clock is selected.

7 Press the œ or √ button to move to the hour or minute. Set the

hour or minute by pressing the

▼ or ▲ button.

8 Press the ENTER ( ) button.

9 When you have finished, press the EXIT ( ) button to exit.

10 Press the INFO ( ) button to display the channel information and

the current time.

Setting the Sleep Timer

You can set your TV to automatically turn off after a preset interval.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

ENG

√√

√√ √√ √√ √√ √√

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Time.

5 Press the ENTER ( ) button.

Result

: The Time is selected.

6 Press the ▼ or ▲ button to select Sleep Timer.

7 Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for

staying on by pressing the

œ or √ button.

8 Press the EXIT ( ) button.

You can select a time period of between 30 and 180 minutes

➢

after the television automatically switches to Standby mode by pressing the

SLEEP ( ) button.

TV Time

Clock 11 : 00 am

Sleep Timer : 30

On Timer -- : -- am Off

Off Timer -- : -- am Off

On Timer Volume : 10

Move Adjust Return

ENG

Switching the Television On and Off Automatically

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

You can set the On/Off timers so that the television will:

◆ Switch on automatically and tune to the channel of your

√√

√√ √√ √√ √√ √√

choice at the time you select

◆ Switch off automatically at the time you select

The first step is to set the television’s clock (refer to

➢

“Setting and Displaying the Current Time” on the page

30). If you have not yet set the clock, the message

the clock first

is displayed.

Set

TV Time

Clock 11 : 00 am

Sleep Timer : Off

On Timer 06 : 00 am On

Off Timer -- : -- am Off

On Timer Volume : 10

Move Adjust Return

TV Time

Clock 11 : 00 am

Sleep Timer : Off

On Timer 06 : 00 am On

Off Timer 11 : 00 pm On

On Timer Volume : 10

Move Adjust Return

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Time.

5 Press the ENTER ( ) button.

Result

: The Time is selected.

6 Press the ▼ or ▲ button to select On Timer. Set the time at which

you wish the television to be switched on automatically.

◆

Press the œ or √ button to move to the hour or minute. Set these by pressing the

◆

Press the œ or √ button to move Off and then, press the ▼ or

▼ or ▲ button.

▲ button to select On and press the ENTER ( ) button.

7 Press the ▼ or ▲ button to select Off Timer. In the same above,

set the time at which you wish the television to be switched off automatically.

Absent Power Off

➢

When you set the timer “On”, your television will eventually be turned off, if you do not operate any controls during the 3 hours after the TV is turned on by timer. This function is available in only the timer “On” mode and will prevent a leakage accident or overheating, caused by your TV left on for a long time due to the timer “On” (when you are away on holiday, for example).

Setting the Preferred Volume Level

The preferred volume can be set for when the timer automatically turns on the TV.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

ENG

√√

√√ √√ √√ √√ √√

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Time

5 Press the ENTER ( ) button.

Result

: The Time is selected.

6 Press the ▼ or ▲ button to select On Timer Volume.

7 Press the œ or √ button to adjust volume level.

8 When you have finished, press the EXIT ( ) button.

TV Time

Clock 11 : 00 am

Sleep Timer : Off

On Timer 06 : 00 am On

Off Timer 11 : 00 am On

On Timer Volume : 10

Move Adjust Return

ENG

Using the LNA (Low Noise Amplifier) feature (depending on the model)

Auto Store Manual Store Add/Delete Sort LNA : Off

Move Enter Return

Auto Store Manual Store Add/Delete Sort

LNA : Off

Move Enter Return

Channel

Off

This function is very useful in the situation that the TV is used in

√√ √√ √√ √√ √√

weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. This feature is working only weak signal condition, and that is memorized on current channel, additional.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Channel.

Result

: The options available in the Channel group are

√√ √√ √√ √√

√√

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select LNA.

displayed.

5 Press the ENTER ( ) button.

6 Press the ▼ or ▲ button to select On.

7 Press the ENTER ( ) button.

Activating the Child Lock

You can restrict viewing by locking the channels of your choice.

Example

: You can prevent your children from watching

unsuitable programmes.

Press the MENU ( ) button.

Result

: The main menu is displayed.

Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

Press the ENTER ( ) button.

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Child Lock : Off

Setup

Child Lock

Off

ENG

√√

√√ √√ √√ √√ √√

√√

4 Press the

▼ or ▲

button to select the

Child Lock

Press the ENTER ( ) button.

Press the ENTER ( ) button again.

6 Press the

Result

➢

Press the ENTER ( ) button.

8 Press the

number of the channel to be locked by pressing the

9 Press the

Press the ENTER ( ) button

Result

▼ or ▲

button to select the On.

: The

If you want to unlock a channel, set to

Child Lock

▼ or ▲

button to select the

Locked

is displayed.

menu is displayed.

button to select the

Lock

Off

Programme

œ or √

. Select the

button.

11 When you have finished, press the EXIT ( ) or MENU ()

button repeatedly to return to normal viewing.

If any channel is locked, you can not enter the Channel

➢

menu by using the control buttons on the television, and the message “Not availble” is displayed. You can access by using the remote control only.

Move Enter Return

TV Child Lock

Child Lock : On Programme : P 1 Lock : ?

Move Adjust Return

TV Child Lock

Child Lock : On Programme : P 1 Lock : Locked

Move Enter Return

√√

ENG

Source List Edit Name

Viewing an External Signal Source (depending on the model)

Use the remote control to switch between viewing signal from

Input

√√ √√

connected equipment, such as VCR, DVD, Set-Top-boxes and the TV source (broadcast or cable)

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

Move Enter Return

TV AV1 ---AV2 ---S-Video ---Component ----

Move Enter Return

Source List Edit Name

Move Enter Return

AV1 : ---AV2 : ---S-Video : ---Component : ----

Move Enter Return

Source List

Input

Edit Name

2 Press the ENTER ( ) button to select Input.

Result

: The options available in the Input group are

displayed.

3 Press the ENTER ( ) button again to select Source List.

Result

: The options available in the Source List group are

displayed.

4 Press the ▼ or ▲ button to select signal source, then press the

ENTER ( ) button.

When you connect equipment to the TV, you can choose

➢

between the following sets of jacks :

AV1, AV2 , S-Video or

Component on the TV’s rear panel, and AV2 or S-Video on

√√ √√

the TV’s side (or front) panel.

S-Video and Component signal sources are depending on

➢

the model.

5 Press the MENU ( ) button.

Result

: The main menu is displayed.

6 Press the ENTER ( ) button to select Input.

Result

√√ √√ √√ √√

7 Press the ▼ or ▲ button to select Edit Name . Press the ENTER

: The options available in the Input group are

displayed.

( ) button.

Result

: The options available in the Edit Name group are

displayed.

Edit Name

----

VCR DVD Cable STB Sat. STB AV Recv. DVD Recv. Game Camcorder DVD Combo

AV1 : ----

AV2 : ---- S-Video : ---- Component : ----

Move Enter Return

8 Press the ▼ or ▲ button to select external device :

√√

√√ √√ √√

AV1-AV2-S-Video -Component.

9 Press the ENTER ( ) button.

Result

The device names available are listed.

10 Select the name by pressing the † or … button.

Press the

ENTER ( ) button.

11 Set other signal sources (AV1 , AV2, S-Video, Component) using

the same method as listed above.

You can also set these options simply by pressing the VIDEO

➢

( ) button. If you change the external source while viewing, pictures might take a short period of time to be switched.

Viewing the Picture In Picture (PIP) (depending on the model)

You can display a sub picture within the main picture of TV program or external A/V devices such as VCR or DVD. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input.

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

……

More Tilt :0 PIP

Move Enter Return

ENG

Picture

√√ √√

2 Press the ▼ or ▲ button to select Picture.

Result

: The options available in the Picture group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select PIP. Press the ENTER ()

button.

5 Press the ENTER ( ) button again.

6 Press the ▼ or ▲ button to On.

Result

: The options available in the PIP group are displayed.

7 Press the ENTER ( ) button.

You can also activate the PIP simply by pressing the PIP ON

➢

button. To deactivate, press it again.

8 Press the ▼ or ▲ button to select Source.

9 Press the ENTER ( ) button.

10 Press the ▼ or ▲ button to select a source of sub picture.

Result

: The sources are displayed in the following order:

TV/AV1/AV2/S-Video

In some PIP TV models, the PIP function will not operate if

➢

the same source to the main picture is selected for the subpicture. When a TV channel is viewed on the main picture, PIP is not available for TV channels. If a TV source is selected, the message "Not available" will appear on the screen. The PIP picture can be viewed only when a source different from the main picture's is selected in the PIP window.

11 Press the ENTER ( ) button.

Off

AV1 AV2 S-Video

PIP

PIP : Off

Move Enter Return

PIP : On Source : TV Swap Size : Large Position : Programme : P 1

Move Enter Return

PIP : On

Source : TV

Swap Size : Large Position : Programme : P 1

Move Enter Return

PIP : On Source : TV Swap Size : Large Position : Programme : P 1

√√

√√ √√ √√ √√ √√

√√

√√ √√ √√

√√ √√ √√ √√ √√

12 Press the ▼ or ▲ button to select Swap.

13 Press the ENTER ( ) button.

Result

: The main picture and the sub picture are

interchanged.

You can also interchange the main picture and the sub

➢

picture simply by pressing the

SWAP button.

Move Enter Return

ENG

Viewing the Picture In Picture (PIP) (depending on the model) (continued)

Small

Large

PIP

PIP : On Source : TV Swap Size : Large Position : Programme : P 1

Move Enter Return

PIP : On Source : TV Swap

Size : Large

Position : Programme : P 1

Move Enter Return

PIP : On Source : TV Swap Size : Large Position : Programme : P 1

Move Enter Return

√√ √√ √√ √√ √√

15 Press the ENTER ( ) button.

16 Select a size of sub picture by pressing the ▼ or ▲ button.

Result

: The sizes are displayed in the following order:

Small-Large

17 Press the ENTER ( ) button.

You can select these options simply by pressing the SIZE

14 Press the ▼ or ▲ button to select Size.

√√ √√ √√

√√

√√ √√ √√ √√ √√

➢

button.

18 Press the ▼ or ▲ button to select Position .

19 Press the ENTER ( ) button.

Result

: The positions available are displayed.

---

You can select these options simply by pressing the

➢

Position ( ) button.

20 Select a position of the sub picture by pressing the † or … button.

Press the

21 Press the † or … button to select Programme . You can select the

channel that you want to view through sub picture by pressing the œ or √ button.

ENTER ( ) button.

PIP : On Source : TV Swap Size : Large

Position :

Programme : P 1

Move Enter Return

PIP : On Source : TV Swap Size : Large Position : Programme : P 1

Move Adjust Return

PIP

◆ When the Source is set to TV, you can select the

➢

√√ √√ √√ √√

√√

√√ √√ √√ √√ √√

channel of sub picture.

◆ You can select the channel of the sub picture simply by pressing the

† or … button.

Viewing the Picture In Picture (PIP) (depending on the model) (continued)

Easy functions of remote control

Buttons Feature

PIP ON Used to activate or deactivate the PIP function directly.

STILL Used to freeze the sub picture.

SWAP Used to interchange the main picture and the sub picture.

When the main picture is in the Video mode and the

➣

sub picture is in the TV mode, you might not hear the sound of main picture when pressing the SWAP ( ) button after changing the sub picture channel. At this time, reselect the channel of main picture.

TV/VIDEO Used to assign a source of sub picture (TV , AV1, AV2 or

S-VIDEO).

SIZE Used to select a size of sub picture (Small or Large ).

POSITION Used to move the sub picture counterclockwise.

P/ Used to select the channel of sub picture.

ENG

Teletext Feature (depending on the model)

Most television channels provide written information services via teletext. Information provided includes:

◆

Television programme times

◆

News bulletins and weather forecasts

◆

Sports results

◆

Travel information

This information is divided into numbered pages (see diagram).

Part Contents

A Selected page number.

B Broadcasting channel identity.

C Current page number or search indications.

D Date and time.

E Text.

F Status information.

➢ ➢

FASTEXT information.

It can be different from depending on TTX source. Teletext information is often divided between several

pages displayed in sequence, which can be accessed by:

◆ Entering the page number

◆ Selecting a title in a list

◆ Selecting a colored heading (FASTEXT system)

Displaying the Teletext Information (depending on the model)

You can display Teletext information at any time on your television.

For Teletext information to be displayed correctly,

☛

channel reception must be stable; otherwise:

◆ Information may be missing

◆ Some pages may not be displayed

1 Select the channel providing the Teletext service using the

( ) or ( )

2 Press the TTX/MIX ( ) button to activate the teletext mode.

Result

3 If you wish to display the actual broadcast at the same time as

the teletext page, press the

4 Press the TV ( ) button to exit from the teletext display.

button.

The contents page is displayed. It can be redisplayed at any time by pressing the (index) button.

TTX/MIX ( ) button.

Selecting a Page by Number (depending on the model)

You can enter the page number directly by pressing the numeric buttons on the remote control.

1 Enter the three-digit page number given in the content by pressing

the corresponding numeric buttons.

Result

: The current page counter is incremented and the

page is then displayed.

2 If the selected page is linked with several secondary pages, the

secondary pages are displayed in sequence. To freeze the display on a given page, press the (hold). Press the (hold) again to resume.

Using the various display options:

To display... Press the...

◆ Both teletext information and TTX/MIX ()

the normal broadcast twice

◆ Hidden text (reveal) (answers to quiz games, for example)

◆ The normal screen (reveal) again

ENG

◆ A secondary page, (sub-page) by entering its 4-digit number

◆ The next page (page up)

◆ The previous page (page down)

◆ Double-size letters in the: (size)

• Upper half of the screen • Once

• Lower half of the screen • Twice

◆ Normal screen • Three times

ENG

Using FLOF to Select a Page (depending on the model)

The various topics included in the teletext pages are color-coded, and can be selected by pressing the colored buttons on the remote control.

1 Display the teletext contents page by pressing the TTX/MIX ()

button.

2 Press the colored button corresponding to the topic that you wish

to select;the available topics are given on the status line.

Result

The page is displayed with other colored information that can be selected in the same way.

3 To display the previous or next page, press the corresponding

colored button.

4 To display the subpage, see the following steps.

◆

Press the (sub-page) button. Result

: The available subpages appear.

◆

Select the required sub-page. Sub-pages can be scrolled by using the

TURBO (Red) or S.MENU (Green) button.

Storing Teletext Pages (depending on the model)

You can store up to four teletext pages to display them later at leisure.

1 Select the LIST mode using the button.

Result

: Four 3-digit numbers are displayed in different

colours.

The button is used to switch between the LIST and

➣

FLOF modes.

2 Press the colored button corresponding to the page that will be

replaced.

3 Enter the new page number using the numeric buttons.

4 Repeat steps 2 and 3 for each page to be stored, using a

different colored button each time.

5 Press the (store) button until the corresponding blocks blink.

Connecting to the AV-1 or 2 Input/Outputs

These figures show typical connector-jack panels. The actual

➢

configuration on your TV may be different, depending on your model.

AV-1 is used for equipment with an RGB output, such as video game

➢

devices and video disc players or a VCR.

ENG

VCR

Rear of TV

MONITOR

-OUT

INPUT 2

INPUT 1

VIDEO

(

)

MONO

L-AUDIO-R

RGB

AV cable

Decoder/

Video game device

Video disc player

Camcorder

Satellite receiver

Connecting to the S-VIDEO Input (depending on the model)

The S-VIDEO/RCA (AUDIO-L and R) connectors are used for equipment

➢

with an S-Video output, such as a camcorder or VCR.

Side of TV Front of TV

When both the side AV and rear connectors are connected to

➢

external equipment, the side (or front) AV receives priority.

Whenever you connect an audio or video system to your television,

☛

ensure that all Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

elements are switched off.

Camcorder

VCR

and

ENG

Connecting to the DVD Input (depending on the model)

The Component/RCA (AUDIO-L and R) connectors are used for equipment with a DVD output.

➢

Rear of TV

Connecting to the RCA Input (depending on the model)

The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,

➢

such as camcorders, video disc players, and some video game devices.

DVD

Camcorder

Side of the TV

Video game device

Video disc player

Connecting to the Audio Output (depending on the model)

The “MONITOR OUT” (L-AUDIO-R) connectors are used for equipment, such as an audio

➢

system (to take full advantage of the Surround sound effect).

Rear of the TV

Audio system

Connecting Headphones (depending on the model)

You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room.

1 Plug a set of headphones into the 3.5 mm mini-jack socket of the

television.

Result

: The sound is heard through the headphones.

2 When you wish to hear the sound through the speakers again,

simply disconnect the headphones.

Prolonged use of headphones at a high volume may

➢

damage your hearing.

ENG

Side of the TV

Viewing Pictures From External Sources (depending on the model)

Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input.

1 Check that all the necessary connections have been made.

2 Switch your television on, then press the VIDEO

repeatedly.

Result

: The input sources are displayed in the following

order:

◆

AV1 AV2 S-VIDEO (option) Component (option) - (RCA model)

◆

AV1 AV2 S-VIDEO (option) - (SCART model)

Depending on the source selected, the pictures may appear

➢

automatically.

To watch television programmes again, press the TV()

➢

button and select the number of the channel required.

()

button

ENG

Automatic Degaussing to Remove Colour Patches

A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually.

If you move the television to a different position and color patches appear on the screen, you must:

◆ Switch the television off by pressing the “ ” (On/Off) button on the front panel

◆ Unplug the television from the wall socket

◆ Leave the television power-off for about 30 minutes so that the automatic degauss function

can be activated, and then press the “POWER ” button on the remote control.

☛ If your television will be left unattended, press the “” (On/Off) button to turn your

television off.

Troubleshooting: Before Contacting Service Personnel

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture, distorted sound

Remote control malfunctions

◆ Check that the mains lead has been connected to a wall socket.

◆ Check that you have pressed the “ ” button (On/Off) and the

POWER ( ) button.

◆ Check the picture contrast and brightness settings.

◆ Check the volume.

◆ Check whether the volume MUTE ( ) button on the remote control

has been pressed.

◆ Adjust the colour settings.

◆ Check that the broadcast system selected is correct.

◆ Try to identify the electrical appliance that is affecting the television,

then move it further away.

◆ Plug your television into a different mains socket.

◆ Check the direction, location and connections of your aerial.

This interference often occurs due to the use of an indoor aerial.

◆ Replace the remote control batteries.

◆ Clean the upper edge of the remote control (transmission window).

◆ Check the battery terminals.

Memo

ENG

AFTER SALES SERVICE

Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.

ELECTRONICS

AA68-03418A-00

Samsung CS-53380TPS, CS-53210TPS, CS-29M6PQ, CS-63970TPS/HA, CS-63900PF/HAC User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Control Panels (depending on the model)

Connection Panels (depending on the model)

Infrared Remote Control

Inserting the Batteries in the Remote Control

Connecting to an Aerial or Cable Television Network

Switching Your Television On and Off

Placing Your Television in Standby Mode

Becoming Familiar with the Remote Control

Plug & Play Feature (depending on the model)

Viewing the Demonstration

Choosing Your Language

Storing Channels Automatically

Storing Channels Manually

Skipping Unwanted Channels

Sorting the Stored Channels

Changing the Picture Standard

Adjusting the Picture Settings

Selecting the Picture Size

Extra Picture Settings

Using the Tilt Control Feature (depending on the model)

Setting the Blue Screen

Changing the Sound Standard

Adjusting the Sound Settings

Extra Sound Settings (depending on the model)

Selecting the Melody

Selecting the Sound Mode (depending on the model)

Setting and Displaying the Current Time

Setting the Sleep Timer

Switching the Television On and Off Automatically

Setting the Preferred Volume Level

Using the LNA (Low Noise Amplifier) feature (depending on the model)

Activating the Child Lock

Viewing an External Signal Source (depending on the model)

Viewing the Picture In Picture (PIP) (depending on the model)

Teletext Feature (depending on the model)

Displaying the Teletext Information (depending on the model)

Selecting a Page by Number (depending on the model)

Using FLOF to Select a Page (depending on the model)

Storing Teletext Pages (depending on the model)

Connecting to the AV-1 or 2 Input/Outputs

Connecting to the S-VIDEO Input (depending on the model)

Connecting to the DVD Input (depending on the model)

Connecting to the RCA Input (depending on the model)

Connecting to the Audio Output (depending on the model)

Connecting Headphones (depending on the model)

Viewing Pictures From External Sources (depending on the model)

Automatic Degaussing to Remove Colour Patches

Troubleshooting: Before Contacting Service Personnel