Page 1
COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual thoroughly,
Control Panel
➢
ΠInput source selection
´ On-screen menu display
ˇ Volume adjustment
¨ Channel selection
ˆ Standby & Timer indicator
Ø Remote control sensor
∏ Power on/off
◆ You can use the ¨ buttons to switch the TV on when it is
◆ The ˇ and ¨ buttons also have the same function as the
◆ If the remote control no longer works or you have
and retain it for future reference.
Register your product at
www.samsung.com/global/register
(depending on the model)
The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
in standby mode depending on the model.
œ/√/†/… buttons on the remote control.
misplaced it, you can use the controls on the panel of the
television.
Connection Panel
The actual configuration of your TV may be different,
➢
depending on your model.
Rear Panel
Whenever you connect an audio or video system to your
☛
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the Œ (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The SCART´ and SCARTˇ connectors are used for
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART´ is also used for equipment with an RGB
output, such as a video game device or video disc player.
(depending on the model)
or
cable television
network
continued...
English - 1
Connecting to the RCA
The RCA4 and RCA5 connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA7 connectors are used for equipment such as a
DVD with component output (480i only).
Connecting to the RCA Output
The RCA6 connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the Woofer
The WOOFER 8 connector is used for connecting the
woofer box (to take full advantage of low frequency
response).
Front (or Side) Panel
Please be sure to match the color coded input terminals
☛
and cable jacks.
Connecting to the RCA Input
The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting to the S-VIDEO Input
The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used
for equipment with an S-Video output, such as a camcorder
or VCR.
Connecting Headphones
The ¨ (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
When both the front (or side) AV and rear connectors
➢
are connected to external equipment, the front (or
side) AV receives priority.
Input
ΠAudio input
´ Video input
ˇ S-Video input
¨ Headphone jack
AA68-03272E-00
Page 2
Remote Control
(depending on the model)
Switching the Television On and Off
Operation of remote control may be affected by bright
➢
artificial light near to the TV.
ΠPOWER
Used to switch the TV
on and off.
´ Numeric buttons
Used to select channels
directly.
ˇ
-/--
Used to select a channel
numbered ten or over.
Press this button, then
“--” symbol is
displayed. Enter the
two-digit channel
number.
¨ MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or
button.
ˆ /
Used to increase or
decrease the volume.
Ø TV
Used to return to the TV
mode when it is in
external input mode.
∏ MENU
Used to display the onscreen menu or return to
the previous menu.
…… / †† / œœ / √√
”
Used to control the
cursor in the menu.
’ DUAL I-II
Used to select the
sound mode.
˝ GAME
Used to enjoy the game
programmed in the TV.
Ô TURBO
Used to select the turbo
sound option.
CH.SCAN
Press to have the TV
automatically scan all of
the channels it has
memorized.
Ò PRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
Ú VIDEO
Used to display all of the
available video sources.
Æ P/
Used to display the next
or previous stored
channel.
ı INFO
Used to view the
channel information and
setting status you
selected.
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+”
and “-” ends of the batteries are
inserted correctly or the batteries are
drained.
Do not mix battery types, i.e.
➢
alkaline and manganese.
English - 2
˜ EXIT
¯ ENTER
˘ P.SIZE
¿ SLEEP
¸ P. MODE
˛ S.MODE
◊ S.MENU
Used to exit from any
display or return to
normal viewing.
While using the onscreen menus, press the
ENTER button to
activate (or change) a
particular item.
Used to change the
screen size.
Used to select a preset
time interval for
automatic turn off.
Used to select the
picture effect.
Used to select the
sound effect.
Used to display the
sound menu.
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
➢
television and the frequency is 50 or 60Hz.
2 Press the button (On/Off) on the front (or side) of the
television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” or “Channel - Manual
Store” on page 4.
If the television is initially powered on, several basic
➢
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
4 To switch the television off, press the button (On/Off)
on the front (or side) of the television.
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2 To switch the television back on, simply press it again.
Do not leave the television in standby mode for long
☛
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
Page 3
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2 Press the … or † button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the … or † button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the …/†/œ/√ button to change the selected
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
button on the remote
control.
The Plug & Play is
displayed. It flickers for a
little while, and then
Language menu is
displayed.
Plug & Play
Language
English
Hindi
Move Enter
continued...
2 Select the appropriated
language by pressing the
… or † button. Press the
Check antenna input.
Enter Exit
ENTER button.
The Check antenna input. is displayed.
If any language is not selected, the language menu
➢
will disappear about 30 seconds later.
3 Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Auto Store menu is
displayed with Area
selected.
TV
Area : Belgie
Search
Move Enter Return
Auto Store
ASIA W/EUROPE
CIS E/EUROPE
CHINA
HONGKONG U/K
AUSTRALIA
NZ/INDONESIA
SOUTH AFRICA
AMERICA
√√
√√
4 Press the ENTER button again.
5 Press the … or † button to select your area. Press the
ENTER button.
6 To search the channels,
select Search by pressing
the … or † button. Press
the ENTER button.
7 Press the ENTER button
again to start search
channels. To stop the
search, press the ENTER
button.
When the channel
searching has finished, the
Time menu is displayed
with Clock selected.
8 Press the œ or √ button to
move to the hour or minute.
P 1 C-- ----- 102MHz
TV
Search
Start
Enter Return
Search
--:--
--:--
--:--
Time
am
am Off
am Off
7 %
Stop
Enter Return
Clock
Sleep Timer : Off
On Timer
Off Timer
On Timer Volume : 10
Reminder
Move Enter Return
√√
Set the hour or minute by pressing the … or † button.
continued...
9 When you have finished,
Enjoy your watching
press the MENU button.
The Enjoy your watching is displayed, and then the
channel which has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜ …/†
(Setup) ➜ ENTER ➜ …/†
(Plug & Play) ➜ ENTER
TV
Plug & Play
Language : English
Time
Child Lock
Blue Screen : Off
Melody : On
Demonstration
Move Enter Return
Input Source List / Edit Name
◆ Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top box,
and the TV source
(broadcast or cable).
You can change the required external source simply
➢
by pressing the VIDEO button on the remote
TV
TV
AV1 ---AV2 ---S-Video ---Component ----
Move Enter Return
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
◆ Edit Name
You can give a name to the
external source.
TV
AV1 : Belgie
AV2 :
S-Video :
Component :
Move Enter Return
Source List
Edit Name
----
VCR
DVD
Cable STB
Sat. STB
AV Recv.
DVD Recv.
Game
Camcorder
DVD Combo
Setup
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
English - 3
Page 4
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
To stop the search before it
➢
has finished, press the
MENU button.
When finished, the Sort menu
is displayed. To sort the stored
TV
Area : Belgie
Search
Move Enter Return
P 1 102MHz
Auto Store
ASIA W/EUROPE
CIS E/EUROPE
CHINA
HONGKONG U/K
AUSTRALIA
NZ/INDONESIA
SOUTH AFRICA
AMERICA
Search
Stop
Enter Return
7 %
√√
√√
channels into the desired
numerical order, refer to “Channel - Sort”. To exit without
sorting, press the EXIT button.
Channel - Turbo Store
You can store all the channels
found in your country in much
less time compared to auto
store.
TV
Auto Store
Turbo Store
Manual Store
Add/Delete
Sort
LNA : Off
Move Enter Return
Channel
√√
√√
√√
√√
√√
√√
Channel - Sort
This operation allows you to
change the programme numbers
of stored channels. This
TV
From : P 1
To : P-Store : ?
operation may be necessary
after using auto store.
◆ From: Channel number to
Move Adjust Return
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Sort
Channel - Manual Store
You can store channels,
including those received via
cable networks. When storing
channels manually, you can
choose:
-
Whether or not to store each
of the channels found
-
The programme number of each stored channel which
TV
Programme : P 3
Color System : AUTO
Sound System : BG
Search : 46MHz
Channel : C 1
Store : ?
Move Adjust Return
you wish to identify
◆ Programme (Programme number to be assigned to a
channel)
◆ Color System: AUTO/PAL/SECAM/NT4.43/NT3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Channel (When you know the number of the channel to
be stored)
You can also select the channel number directly by
➢
pressing the numeric buttons (0~9).
◆ Store (When you store the channel and associated
programme number)
If there is no sound or abnormal sound, re-select the
➢
sound standard required.
Channel mode
☛
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
English - 4
Manual Store
√√
√√
Channel - Add/Delete
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to skip
are not displayed. All of the
channels that you did not
TV
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
Move Enter Return
specifically choose to skip are displayed during scanning.
Select Added or Deleted by pressing the ENTER button
repeatedly.
Add/Delete
Channel - LNA
This function is very useful in the
situation that the TV is used in
weak signal. LNA amplifies the
TV signal in the weak signal
area, but not noise.
TV
Auto Store
Turbo Store
Manual Store
Add/Delete
Sort
LNA :
Move Enter Return
◆ LNA (Low Noise Amplifier) setting is to be made for
each channel.
◆ If the picture is noisy with the LNA set to On, select Off.
◆ Depending on areas, factory mode of LNA will be set up
as On or Off.
Channel
Off
On
√√
√√
√√
√√
√√
√√
Page 5
Setup - Time
◆ Clock
You can set the television
clock so that the current time
is displayed when pressing
the INFO button on the
remote control. You must
also set the time if you wish
TV
Clock
Sleep Timer : Off
On Timer
Off Timer
On Timer Volume : 10
Reminder
Move Enter Return
to use the automatic on or off timers.
When pressing the button (On/Off) on the front
➢
(or side) of the television, the clock setting will be
reset.
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the television automatically switches
to standby mode.
You can select these options simply by pressing the
➢
SLEEP button on the remote control. If the sleep
timer is not yet set, Off is displayed. If it is already
set, the remaining time before which the television
switches to standby mode is displayed.
--:--
--:--
--:--
Time
am
am Off
am Off
Setup - Reminder
This feature facilitates you for displaying a message input on
the screen at the desired time set by you.
√√
If you do not want to display
◆ REMINDER: ON/OFF
TV
a message, set to OFF.
◆ MESSAGE
-
EDIT (A~Z, 0~9, &, -)
Message of maximum 30
characters can be entered.
-
ERASE
TV
You can delete the entire
written message.
REMINDER
REMINDER : ON
MESSAGE
DISPLAY TIME :
Move Enter Return
EDIT --------------------
ERASE:
√√
--:--
AM
MESSAGE
-------------------?
√√
√√
Setup Language / Blue Screen /
Melody / Demonstration
◆ Language
It is variable depending on
the model. When you start
using the television for the
first time, you must select the
language which will be used
for displaying menus and
TV
Plug & Play
Language : English
Time
Child Lock
Blue Screen : Off
Melody : On
Demonstration
Move Enter Exit
indications.
◆ Blue Screen
If no signal is being received or the signal is very weak, a
Setup
√√
√√
√√
√√
√√
√√
blue screen automatically replaces the noisy picture
◆ DISPLAY TIME
It is the time at which the
Move Enter Return
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
message will be displayed on the screen.
◆ Melody
You can hear melody sound when the television is
powered on or off.
◆ On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
You must set the clock first.
☛
◆ On Timer Volume
The preferred volume can be set for when the timer
automatically turns on the television.
Auto Power Off
☛
When you set the timer “On”, the TV will eventually turn
off, ifno controls are operated for 3 hours after the TV
was turned on by timer. This function is only available
in timer “On” mode and prevents overheating, which
may occur if a TV is on for too long.
Setup - Child Lock
This feature allows you to
prevent unauthorized users,
such as children, from watching
TV
Child Lock : On
Programme : P 1
Lock : ?
unsuitable programmes by
muting out video and audio.
Child Lock cannot be released
using front (or side) panel
Move Enter Return
buttons. Only remote control can release the Child Lock
setting, so keep the remote control away from children.
◆ Child Lock: On/Off
If you want to unlock a channel, set to Off.
◆ Programme: Channel number to be locked.
◆ Lock: When press the ENTER button, the Locked is
displayed.
If any channel is locked, you can not enter the
➢
Channel menu by using the control buttons on the
television, and the Not available is displayed. You
can access by using the remote control only.
English - 5
Child Lock
√√
◆ Demonstration
To become familiar with the various menus provided by
the television, you can view the in built demonstration.
Each of the menu options is displayed in turn. To exit
from the demonstration, press the EXIT button.
Page 6
Picture Mode / Custom /
Color Tone / Size /
Digital NR / DNIe Jr / Tilt
◆ Mode: Dynamic/
Standard/Movie/Custom
You can select the type of
picture which best
corresponds to your viewing
requirements.
You can select these
➢
options simply by
pressing the P. MODE
button on the remote
control.
TV
Mode : Dynamic
Custom
Color Tone : Normal
Size : Normal
Digital NR : Off
DNIe Jr : On
††
More
Move Enter Exit
TV
……
More
Tilt : 0
PIP
◆ Custom: Contrast/
Brightness/Sharpness/
Color/Tint (NTSC only)
Move Enter Exit
The television has several settings which allow you to
control the picture quality.
If you make any changes to these settings, the
➢
picture mode is automatically switched to Custom.
◆ Color Tone: Cool2/Cool1/Normal/Warm1/
Warm2
◆ Size
You can select the picture size which best corresponds to
your viewing requirements. It is variable depending on
the model.
You can change the picture size simply by pressing
➢
the P.SIZE button on the remote control.
◆ Digital NR
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting
that may appear on the screen.
◆ DNIe Jr
(Digital Natural Image engine Junior)
(depending on the model)
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you. DNIe Jr
technology will fit every signals into your eyes.
◆ Tilt (depending on the model)
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting (-7 to +7).
Picture
Picture
Picture - PIP
You can display a sub picture within the main picture of TV
programme or external A/V devices such as VCR or DVD. In
this way you can watch TV program or monitor the video
input from any connected devices while watching TV or other
video input.
√√
√√
√√
√√
√√
√√
TV
……
More
Tilt : 0
PIP
Move Enter Exit
Picture
TV
PIP : On
Source : TV
√√
Swap
Size : Large
Position :
Programme : P 1
Move Enter Return
PIP
√√
√√
√√
√√
√√
√√
Sound Mode / Equalizer /
Auto Volume / Dolby Virtual /
Pseudo Stereo / Turbo Plus
◆ Mode: Standard/Music
/Movie/Speech/Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
You can select these
➢
options simply by pressing the S.MODE button on
TV
Mode : Custom
Equalizer
Auto Volume : Off
Dolby Virtual : Off
Pseudo Stereo : Off
Turbo Plus : Off
††
More
Move Enter Exit
Sound
√√
√√
√√
√√
√√
√√
the remote control.
√√
◆ PIP: On/Off
You can activate or deactivate the PIP funtion. Œ
◆ Source
You can select a source of the sub-picture. ´
Depending on the models, the sub-picture can be
➢
viewed only when a source different from the main
picture's is selected. If a TV programme is viewed
on the main picture, the sub-picture is not available
for TV programmes. If a TV source is selected, the
message Not available is displayed.
◆ Swap
You can interchange the main picture and sub-picture. ˇ
◆ Size: Small/Large
You can select a size of the sub-picture. ¨
◆ Position: / / /
You can select a position of the sub-picture. ˆ
◆ Programme
You can select a channel of the sub-picture only when
the Source is set to TV. Ø
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
If you make any changes to these settings, the
➢
sound mode is automatically switched to Custom.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
◆ Dolby Virtual (depending on the model)
Pseudo Stereo
These features convert a monaural sound signal into two
identical left and right channels. Once the Dolby
Virtual or Pseudo Stereo is set to On or Off, these
settings apply to the sound effects such as Standard,
Music, Movie, and Speech.
Manufactured under license from Dolby
☛
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Easy functions of the remote control
You can freeze the sub-picture.
Laboratories.
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
You can change the options simply by pressing the
➢
TURBO button on the remote control.
English - 6
Page 7
Sound
When the woofer speaker is
mounted to the TV, you can hear
the bass sound-effect (if not
mounted, the volume is much
lower). Attach the woofer
speaker ribs in the holes on the
top of TV. Connect the woofer
speaker wire to woofer output connector on the rear of TV.
Select the Woofer Volume and adjust to satisfy your
preference.
➢
Enjoying Games
You can enjoy the game (Chicken Farm), programmed in this
TV.
1 Press the GAME button on the
2 Press the œ or √ button to run the
3 Move the farmer to catch eggs by
4 Every time you catch fifty eggs (i.e.,
5 If you want to stop during the game,
6 If you want to re-start the game,
7 To exit the Game mode, press the GAME button.
- Woofer
TV
Woofer : On
Woofer Volume : 70
Move Enter Return
When you use headphones, first turn off the woofer.
(depending on the model)
remote control to enter the Game
mode. The READY window will be
displayed.
game.
using the œ or √ button. Every time
the scores go up, the speed of
game becomes faster bit by bit.
50, 100, 150 ...), if any broken egg
exists, one egg can be restored.
When five eggs are lost, the game
will be over and simultaneously the
final score window will be displayed.
press the MENU button. Then, the
final score window will be displayed.
press the MENU, œ, or √ button.
Then, the final score window will be
switched to the READY window.
Woofer
√√
√√
Teletext Feature
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
For teletext information to be displayed correctly,
☛
channel reception must be stable. Otherwise,
information may be missing or some pages may not be
displayed.
Π(teletext on/mix)
Press to activate teletext mode after selecting the
channel providing the teletext service. Press it again to
overlap the teletext with the current broadcasting screen.
´ (sub-page)
Used to display the available sub-page.
(depending on the model)
English - 7
ˇ (size)
Press to display the double-size letters in the upper half
of the screen. For lower half of the screen, press it again.
To display normal screen, press it once again.
¨ (store)
Used to store the teletext pages.
ˆ (hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow
on automatically. To resume, press it again.
Ø (page up)
Used to display the next teletext page.
∏ (mode)
Press to select the teletext mode (LIST/FLOF). If you
press it in the LIST mode, it switches into the List save
mode. In the List save mode, you can save teletext page
into list using the (store) button.
” (page down)
Used to display the previous teletext page.
’ (index)
Used to display the index (contents) page at any time
while you are viewing teletext.
˝ (reveal)
Used to display the hidden text (answers to quiz games,
for example). To display normal screen, press it again.
Ô Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting
company, the different topics covered on a teletext page
are color-coded and can be selected by pressing the
coloured buttons. Press one of them corresponding to the
required. The page is displayed with other coloured
information that can be selected in the same way. To
display the previous or next page, press the
corresponding coloured button.
Page 8
Troubleshooting
OSD Map
✽ : It is variable depending on the model.
Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a
wall socket.
◆ Check that you have pressed the button (On/Off)
and the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the
remote control has been pressed.
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting
the television, then move it further away.
◆ Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
◆ Check the direction, location and connections of your
aerial.
This interference often occurs due to the use of an
indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
◆ Check that the “+” and “-” ends of the batteries are
inserted correctly.
◆ Check that the batteries are drained.
Input
Picture
Sound
Channel
Setup
-
Source List
-
Edit Name
-
Mode
-
Custom
-
Colour Tone
-
Size
✽
-
Digital NR
-
DNIe Jr
-
Tilt
-
PIP
-
Mode
-
Equalizer
-
Auto Volume
-
Dolby Virtual
-
Pseudo Stereo
-
Turbo Plus
-
Woofer
✽
-
Auto Store
-
Tubrbo Store
-
Manual Store
-
Add/Delete
-
Sort
-
LNA
-
Plug & Play
-
Language
-
Time
-
Child Lock
-
Blue Screen
-
Melody
-
Demonstration
✽
-
VCR / DVD / Cable STB / Sat. STB / AV Recv. / DVD Recv. / Game /
Camcorder / DVD Combo
Dynamic / Standard / Movie / Custom
-
-
Contrast / Brightness / Sharpness / Colour / Tint (NTSC only)
-
Cool2 / Cool1 / Normal / Warm1 / Warm2
-
Off / On
-
Off / On
-
-
PIP
-
Source
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
✽
-
-
-
-
-
-
-
-
-
✽
Swap
Size
Position
Programme
Standard / Music / Movie / Speech / Custom
Off / On
Off / On
Off / On
Off / On
Area
✽
Search
Programme
Color System ✽Sound System ✽Search
Channel
Store
Off / On
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
Reminder
Off / On
Off / On
Off / On
✽
Off / On
-
ASIA W/EUROPE / CIS E/EUROPE / CHINA /
HONGKONG U/K /AUSTRALIA / NZ/INDONESIA /
SOUTH AFRICA / AMERICA
AUTO / PAL / SECAM / NT4.43 / NT3.58
BG / DK / I / M
English - 8
Loading...