Samsung CS-21S8WTR User Manual [en, en]

COLOUR TELEVISION

15A8 21A8/21A9/21M6/21S5/21S8 564B/566B/569B 25A6/25D4/25M6 29D4/29D6/29D8/29U2 30A9/7601

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ENG

REMOTE CONTROL

ON-SCREEN MENUS

TELETEXT FUNCTION

(OPTION)

ENG

Safety Instructions

The following illustrations represent the precautions to be taken when using and moving your television.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

Caution

CAUTION: TO PREVENT ELECTRICAL SHOCK, DO

NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%).

Do NOT expose the television to direct sunlight.

Do NOT expose the television to any liquids.

If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

Mode System

CZ PAL-B/G, D/K, I, SECAM-B/G,D/K, I,

NTSC4.43

CW PAL-B/G, D/K, I, SECAM-B/G,D/K, I, L/L’,

NTSC4.43

CS PAL-B/G, D/K, I, SECAM-B/G,D/K, I,

NTSC4.43/3.58

WARNING: TO PREVENT DAMAGE WHICH MAY

RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

☛

The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.

The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.

The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

➢

Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.

10%

5°

75%

35°

ENG

Contents

◆ PREPARING YOUR TELEVISION

■

Safety Instructions......................................................................................... 2

■

Caution.......................................................................................................... 2

■

Front Control Panel ....................................................................................... 4

■

Connection Panels ........................................................................................ 5

■

Infrared Remote Control (All Functions Except Teletext).............................. 6

■

Infrared Remote Control (Teletext Functions)............................................... 7

■

Inserting the Batteries in the Remote Control................................................ 8

■

Connecting the Aerial (or Cable Television Network).................................... 8

■

Switching Your Television On and Off........................................................... 9

■

Placing Your Television in Standby mode..................................................... 9

■

Plug & Play Feature....................................................................................... 10

■

Viewing the Demonstration............................................................................ 11

■

Choosing Your Language.............................................................................. 12

◆ SETTING UP THE CHANNELS

■

Storing the Channels Automatically............................................................... 13

■

Storing the Channels Manually...................................................................... 14

■

Giving Channels Names................................................................................ 16

■

Skipping Unwanted Channels ....................................................................... 17

■

Fine tuning Channel Reception..................................................................... 18

■

Sorting the Stored Channels ......................................................................... 19

◆ USING THE TELEVISION

■

Changing the Picture Standard ..................................................................... 20

■

Adjusting the Picture Settings........................................................................ 21

■

Selecting the Picture Format......................................................................... 21

■

Activation/Deactivation the Digital Noise Reduction Feature ........................ 22

■

Changing the Sound Standard...................................................................... 23

■

Adjusting the Sound Settings ........................................................................ 24

■

Extra Sound Settings..................................................................................... 25

■

Selecting the Sound Mode ............................................................................ 26

■

Selecting the Turbo Sound............................................................................ 27

■

Adjusting the Volume..................................................................................... 27

■

Switching the Sound Off Temporarily............................................................ 27

■

Setting the Sleep Timer................................................................................. 28

■

Setting and Displaying the Current Time....................................................... 28

■

Switching the Television On and Off Automatically....................................... 29

■

Setting the Blue Screen Mode....................................................................... 30

■

Activating the Childlock ................................................................................. 30

◆ USING THE TELETEXT FUNCTION (Option)

■

Teletext Decoder........................................................................................... 31

■

Displaying Teletext Information..................................................................... 31

■

Selecting a Specific Teletext Page................................................................ 32

■

Using FLOF to Select a Teletext Page.......................................................... 33

■

Storing Teletext Pages.................................................................................. 33

◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE

■

Connecting to the AV-1 or 2 Input/Outputs.................................................... 34

■

Connecting to the Rear S-VIDEO Input (Option)........................................... 34

■

Connecting to the Rear DVD Input (Option).................................................. 35

■

Connecting to the RCA Input......................................................................... 35

■

Connecting Headphones............................................................................... 36

■

Viewing Picture From External Sources........................................................ 36

■

Automatic Degaussing to Remove Colour Patches....................................... 37

■

Trouble Shooting: Before Contacting Service Personnel.............................. 37

☛

➢

Symbols

Press Important Note

ENG

Front Contr ol P anel(depending on the model)

➣

Buttons and markings are subject to change.

TV/VIDEO

SELECTION

MENU DISPLAY

VOLUME ADJUSTMENT

CHANNEL SELECTION

POWER

STAND-BY/TIMER

INDICATOR

REMOTE CONTROL SENSOR

MENU DISPLAY

VOLUME ADJUSTMENT

CHANNEL SELECTION

POWER

STAND-BY/TIMER

INDICATOR

REMOTE CONTROL SENSOR

ENG

Connection Panels

HEADPHONE JACK

INPUT 1

MONITOR

-OUT

INPUT 2

VIDEO

(

MONO

)

L-AUDIO-R

Side of TV

Rear of TV

RCA AUDIO/VIDEO INPUT CONNECTORS

75 Ω COAXIAL CONNECTOR

FOR AERIAL/CABLE NETWORK

Front of TV

HEADPHONE JACK

RCA AUDIO/VIDEO

INPUT CONNECTORS

☛

This figure shows the Standard Connector-jack panel. The actural configuration on your TV may be different, depending on the model.

DVD INPUT CONNECTORS

(OPTION)

S-VIDEO CONNECTOR

(OPTION)

RCA AUDIO/VIDEO

INPUT/OUTPUT CONNECTORS

RGB

SCART AUDIO/VIDEO

INPUT/OUTPUT CONNECTORS

ENG

Infrared Remote Control (All Functions Ex cept Teletext)

➣

Operation of remote control may be affected by bright artificial light near to the TV set.

POWER

SOUND MENU DISPLAY

(OPTION)

ONE/TWO-DIGIT CHANNEL

SELECTION

TURBO SOUND ON/OFF

(OPTION)

TEMPORARY SOUND SWITCH-

OFF

VOLUME DECREASE

PREVIOUS CHANNEL

DIRECT CHANNEL SELECTION

TUNER/CABLE NETWORK SELECTION

EXTERNAL INPUT SELECTION

ON-SCREEN DISPLAY

AUTOMATIC SWITCH-OFF

PICTURE SIZE NEXT CHANNEL

VOLUME INCREASE

PICTURE STANDARD

SOUND STANDARD (OPTION)

SOUND MODE SELECTION (OPTION)

MENU DISPLAY

➣

Buttons and markings are subject to change.

ENG

Infrared Remote Control (Teletext Functions)

TELETEXT HOLD

FASTEXT TOPIC SELECTION

TELETEXT NEXT PAGE

TELETEXT PREVIOUS PAGE

TELETEXT DISPLAY/MIX

LIST/FLOF MODE SELECTION

TELETEXT REVEAL

TELETEXT STORE

PICTURE SIZE

TELETEXT SUB-PAGE

PROGRAMME SELECTION BY NAME

➣

Buttons and markings are subject to change.

ENG

You must insert or replace the batteries in the remote control when you :

◆ Purchase the television.

◆ Find that the remote control is no longer operating

correctly.

1 Remove the cover of the remote control by pressing the symbol

( ) and pulling the cover in the direction of the arrow.

2 Insert batteries, taking care to respect the polarities:

◆ + on the battery with +on the remote control

◆-on the battery with -on the remote control

3 Replace the cover by pushing it in the direction of the arrow.

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.

Inserting the Batteries in the Remote Control

Connecting the Aerial (or Cable Television Netw ork)

Cable Television Network

Rear of TV

PRESS

ENG

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

➢

The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.

2 Press the “” (ON/OFF) button on the front of the television.

Result

: The Standby indicator lights up on the front panel.

3 Press the POWER button on the remote control to switch the

television on. Result

: The programme that you were watching last is re-

selected automatically.

4 To switch your television off, press the “” (ON/OFF) button

again on the front of the television.

Placing Your Tele vision in Standb y mode

Your television can be placed in Standby mode, in order to reduce:

◆ Power consumption

◆ Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

The television is placed automatically in Standby mode when you turn it on.

1 Press the POWER button on the remote control.

Result:

The screen is turned off and the Standby indicator on the front of the television lights up.

2 To switch the screen back on, simply press the POWER button

again on the remote control.

➣

Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.

Switc hing Your Television On and Of f

ENG

Plug & Play Feature

When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1 If the television is in Standby mode (red light visible on the

television front panel), press the POWER button on the remote control.

Result: The message “Plug & Play” is displayed. It flickers for a

little while and then the “Language” menu is automatically displayed.

2 Press the ▲ or ▼ button to select required language. Press the

MENU button to enter the language, and then the message “Ant.

Input : Check” is displayed.

➣

If any language is not selected on the “Language” menu, the “Language” menu will be displayed about 30 seconds later.

3 Make sure that the antenna is connected to the TV. And then press

the + or – button.

Result: The “Auto store” menu is displayed.

4 Select your country by pressing the + or – button. To search the

channels, select the “Search” by pressing the ▲ or ▼ button, and then press the + or – button (refer to “Storing the Channels Automatically” on page 13). Press the MENU button to skip.

Result:

The “Time” menu is displayed.

5 Press the +or – button to move to the hour or minute. Set the hour

or minute by pressing the ▲ or ▼ button (refer to “Setting and Displaying the Current Time” on page 28).

6 When you have finished, press the MENUbutton.

Result:

The message “ENJOY YOUR WATCHING” is displayed, and then the channel which has been stored will be activated.

7 If you want to reset this feature...

1 Press the MENU button.

2 Press the ▲ or ▼ button to select the “Function”, and then

press the + or – button.

3 Select the “Plug & Play” by pressing the ▲ or ▼ button, and

then press the

+ or – button.

Result:

The message “Plug & Play” is displayed.

Plug & Play

Ant. Input : Check

Select Exit

Auto store Area : ASIA W/EUROPE Search : -/+

Select Adjust Exit

Time Clock : -- : -- am Timer : Off

Select Enter Exit

Function Language : English Time Plug & Play Blue screen : Off Childlock Demonstration

Select Enter Exit

Function Language : English Time Plug & Play Blue screen : Off Childlock Demonstration

Select Enter Exit

ENG

Viewing the Demonstration

To become familiar with the various menus provided by your television, you can view the inbuilt demonstration.

1 Press the MENUbutton. 2 Press the ▲or ▼ button to select the “Function” and press the + or

– button.

3 Press the ▲ or ▼ button to select the “Demonstration” and press

the + or – button.

Result: Each of the menu options is displayed in turn.

4 When you wish to stop the demonstration, press any button on the

remote control.

Picture Mode Custom Adjust Digital NR : Off

Select Enter Exit

Function Language : English Time Plug & Play Blue screen : Off Childlock Demonstration

Select Enter Exit

Function Language : English Time Plug & Play Blue screen : Off Childlock Demonstration

Select Enter Exit

ENG

Choosing Your Language

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

1 Press the MENUbutton. 2 Press the ▲or ▼ button to select the “Function”. 3 Press the +or – button to select the “Language”. 4 Select a particular language by pressing the ▲ or ▼ button

repeatedly.

5 When you have finished, press the TV button, or press the

MENU button repeatedly to return to normal viewing.

Picture Mode Custom Adjust Digital NR : Off

Select Enter Exit

Function Language : English Time Plug & Play Blue screen : Off Childlock Demonstration

Select Enter Exit

Function Language : English Time Plug & Play Blue screen : Off Childlock Demonstration

Select Adjust Exit

+ 28 hidden pages