Samsung CS-21M20MK, CS-21M16MK, CS-21K30ML, CS-21K30MG, CS-21K10ML User Manual

COLOR TELEVISION

Owner’s Instructions

Before operating, please read this manual thoroughly,

Control Panel

➢

and retain it for future reference.

Register your product at

www.samsung.com/global/register

(depending on the model)

The actual configuration of your TV may be different,
depending on your model.

Front (or Side) Panel

Connection Panel

The actual configuration of your TV may be different,

➢

depending on your model.

Rear Panel

or

Whenever you connect an audio or video system to your

☛

television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.

(depending on the model)

or

cable television
network

Connecting to the RCA Input

The RCA¨ connectors are used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player. (When using the mono equipment, connect
to the AUDIO-L input connector.)

Connecting to the RCA Output

The RCAˇ connectors are used for equipment, such as a
recording VCR or audio system.

Front (or Side) Panel

ΠAudio input

´ Video input

ˇ Headphone jack

or

ˇ Headphone jack

´ Video input
ΠAudio input

ΠOn-screen menu display
´ Volume adjustment
ˇ Channel selection
¨ Standby indicator
ˆ Remote control sensor
Ø Power on/off

◆ You can use the ˇ buttons to switch the TV on when it is

in standby mode depending on the model.

◆ The ´ and ˇ buttons also have the same function as the
œ/√/…/† buttons on the remote control.

◆ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the Œ (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.

Connecting to the SCART Input/Output

The SCART´ connector is used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player.

continued...

English - 1

Please be sure to match the color coded input terminals

☛

and cable jacks.

Connecting to the RCA Input

The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.

Connecting Headphones

The ˇ (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.

When both the front (or side) AV and rear connectors

➢

are connected to external equipment, the front (or
side) AV receives priority.

AA68-03121B-00

Remote Control

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

(depending on the model)

∏∏

MENU

Used to display the on­screen menu or return to
the previous menu.

”” …… / †† / œœ / √√

Used to control the
cursor in the menu.

’’

DUAL I-II (option)
Used to select the
sound mode.

˝˝

GAME (option)
Used to enjoy the game
programmed in the TV.

ÔÔ

TURBO (option)
Used to select the turbo
sound option.



S.MENU (option)
Used to display the
sound menu.

ÒÒ

PRE-CH

Used to switch
repeatedly between the
last two channels
displayed.

ÚÚ

VIDEO

Used to display all of the
available video sources.

ÆÆ

P/

Used to display the next
or previous stored
channel.

ıı

INFO

Used to view the
channel information and
setting status you
selected.

˜˜

EXIT

Used to exit from any
display or return to
normal viewing.

¯¯

ENTER

While using the on­screen menus, press the
ENTER button to
activate (or change) a
particular item.

˘˘

P.SIZE

Used to change the
screen size.

¿¿

SLEEP

Used to select a preset
time interval for
automatic shut off.

¸¸

P.MODE

Used to select the
picture effect.

˛˛

S.MODE (option)
Used to select the
sound effect.

Switching the Television On and Off

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the

➢

television and the frequency is 50 or 60Hz.

2 Press the button (On/Off) on the front (or side) of the

television.

3 Press the POWER button on the remote control to

switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” or “Channel - Manual
Store” on page 4.

If the television is initially powered on, several basic

➢

customer settings proceed automatically. Refer to
“Function - Plug & Play” on page 3.

4 To switch the television off, press the button (On/Off)

on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).

ŒŒ

POWER

Used to switch the TV
on and off.

´´

Numeric buttons

Used to select channels
directly.

ˇˇ

-/--

Used to select a channel
numbered ten or over.
Press this button, then
“--” symbol is
displayed. Enter the
two-digit channel
number.

¨¨

MUTE

Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or

button.

ˆˆ

ØØ

/

Used to increase or
decrease the volume.

TV

Used to return to the TV
mode when it is in
external input mode.

Installing Batteries

Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+” and “-” ends of the
batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 2

1 Press the POWER button on the remote control while

viewing.
The television is in standby mode.

2 To switch the television back on, simply press it again.

Do not leave the television in standby mode for long

☛

periods of time (when you are away on holiday, for
example). Turn the television off by pressing the
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.

Viewing the Menus

Function - Plug & Play

1 Press the MENU button.

The main menu is displayed on the screen. Its left side
has four icons: Picture, Sound, Channel, and
Function.

2 Press the … or † button to select one of the icons.

Press the œ or √ button to access the icon’s sub-menu.

3 Press the … or † button to move to items in the menu.

Press the œ or √ button to enter items in the menu.

4 Press the …/†/œ/√ button to change the selected

items. Press the MENU button to return to the previous
menu.

5 Press the EXIT button to exit from the menu.

When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.

1 If the television is in standby

Plug & Play

mode, press the POWER
button on the remote control.
The Plug & Play is displayed. It flickers for a little
while, and then Language menu is displayed.

2 Select the appropriated

language by pressing the …
or † button. Press the
MENU button.
The Ant. Input Check
is displayed.

If any language is not

➢

selected, the language

Language

English

Indonesia
Malaysia

Adjust Select

Ant. Input Check

Auto Store Exit

menu will disappear about 30 seconds later.

3 Make sure that the antenna is connected to the

television (refer to page 1).

4 Press the œ or √ button to

search the channels. The

P 1
471 MHz 48%

searching starts. To stop the
search, press the MENU

Exit

button.

continued...

5 When the channel

searching has finished, the
Time menu is displayed
with Clock selected.

Time

Clock -- : -- am

Move Exit

6 Press the œ or √ button to move to the hour or minute.

Set the hour or minute by pressing the … or † button.

7 When you have finished,

ENJOY YOUR WATCHING

press the MENU button.
The

ENJOY YOUR WATCHING is displayed, and then the

channel which has been stored will be activated.

Re-setting the Plug & Play

Method: MENU ➜ …/†
(Function) ➜ œ/√ ➜ …/†
(Plug & Play) ➜ œ/√

Language : English
Time

Plug & Play

Blue Screen : Off
Child Lock

Select Enter Exit

Function

√√

√√

√√

English - 3