Samsung CS-21K40MJ, CS-21Z30SN, CS-21Z50SN, CS-21M40SN, CS-21Z40ML User Manual

...

COLOUR TELEVISION

CS 21Z30/21Z40/21Z45/21Z50/

21Z57/21Z58/21K40/21M40/ 21E22

Owner’s Instructions

Connection Panel (depending on the model)

The product colour and shape may vary depending on the

➢

model.

Rear Panel

Connecting to the RCA Input

The RCA

3 connectors are used for equipment, such as a

VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the

AUDIO-L input connector.)

The RCA

4 connectors are used for equipment such as a

DVD with component output (480i only).

Before operating, please read this manual thoroughly,

and retain it for future reference.

Record your Model and Serial number.

▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

The product colour and shape may vary depending on the

➢

model.

Front (or Side) Panel

1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Standby indicator 6 Power on/off

 You can use the 3 buttons to switch the TV on when it is

in standby mode depending on the model.

 The 2 and 3 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

cable television network

Whenever you connect an audio or video system to your

☛

television, ensure that all elements are switched off.

Please be sure to match the colour coded input terminals

☛

and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

Connecting to the RCA Output

The RCA

2 connectors are used for equipment, such as a

recording VCR or audio system.

1 (75 Ω

continued...

Front (or Side) Panel

2 3

Connecting to the RCA Input

The 1 (AUDIO-L/R or AUDIO) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

Connecting Headphones

The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing.

When both the front (or side) AV and rear connectors are

➢

connected to external equipment, the front (or side) AV receives priority.

1 Audio input 2 Video input 3 Headphone jack

English - 1

AA68-03905A-04

Remote Control (depending on the model)

Switching the Television On and Off

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

This is a special remote control for the visually impaired,

➢

and has Braille points on the POWER, Channel and Volume buttons.

1 POWER

Used to switch the TV on and off.

2 Numeric buttons

Used to select channels directly.

3 -/--

Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number.

4 /

Used to increase or decrease the volume.

5 MENU

Used to display the on-screen menu or return to the previous menu.

6 ▲/▼/◄/►

Used to control the cursor in the menu.

7 S.MENU (option)

Used to display the sound menu.

8 TURBO (option)

Used to select the turbo sound option.

9 DUAL I-II (option)

Used to select the sound mode.

0 SOURCE

Used to display all of the available video sources.

! INFO

Used to view the channel information and setting status you selected.

@ PRE-CH

Used to switch repeatedly between the last two channels displayed.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “–” ends of the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

# P / P

$ EXIT

% MUTE

^ ENTER

& S.MODE (option)

* P.MODE

( TV

) SLEEP

English - 2

Used to display the next or previous stored channel.

Used to exit from any display or return to normal viewing.

Used to switch the sound off temporarily. To turn the sound back on, press the

, or

While using the on-screen menus, press the ENTER button to activate (or change) a particular item.

Used to select the sound effect.

Used to select the picture effect.

Used to return to the TV mode when it is in external input mode.

Used to select a preset time interval for automatic turn off.

MUTE,

button.

The mains lead is attached to the rear of the television

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the

➢

television and the frequency is 50 or 60Hz.

2 Press the “ I ” button (On/Off) on the front (or side) of the

television.

3 Press the POWER button on the remote control to switch

the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel

- Auto Store” on page 3 or “Channel - Manual Store” on page 4.

If the television is initially powered on, several basic

➢

customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.

4 To switch the television off, press the “ I ” button (On/Off)

on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER button on the remote control while

viewing. The television is in standby mode.

2 To switch the television back on, simply press it again.

You can also switch on by pressing the TV,

➢

P / P , or numeric button.

Do not leave the television in standby mode for long

☛

periods of time (when you are away on holiday, for example). Turn the television off by pressing the “ button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

I ”

English - 3

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons:

Input, Picture, Sound, Channel, and

Setup.

2 Press the ▲ or ▼ button to select one of the icons.

Press the

ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the

ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the

MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Setup - Plug & Play (depending on the model)

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in standby

mode, press the button on the remote control.

POWER

The message Start Plug & Play is displayed. To start Plug & Play, press the ENTER button. The Language menu is displayed.

The Language menu will

➢

automatically appear after several seconds, even if the ENTER button is not pressed.

2 Select the appropriated

language by pressing the ▲ or ▼ button. Press the ENTER button. The Check antenna input. is displayed.

If any language is not selected, the language menu

➢

will disappear about 30 seconds later.

Plug & Play

Start Plug & Play

Enter Return

Plug & Play

Language

English

Français

Indonesia Melayu

Türkçe

Move Enter Skip

Plug & Play

Check antenna input.

Enter Skip

3 To search the channels,

press the

ENTER button. To stop the search, press the ENTER button. When the channel searching has finished, the Clock Set menu is displayed.

4 Press the ◄ or ► button to

move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button.

5 When you have finished,

press the

MENU button. The Enjoy your watching. is displayed, and then the channel which has been stored will be activated.

Re-setting the Plug & Play

Method:

MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play)  ENTER

Plug & Play

Auto Store

Start

Enter Skip

Plug & Play

Auto Store

P 1 102MHz 7 %

Stop

Enter Skip

Plug & Play

Clock Set 0 1 : 00 am

Move Enter

Adjust Skip

Enjoy your watching.

Plug & Play

Language : English Time Child Lock Blue Screen : Off

Move Enter Return

Setup

Input - Source List

You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top box, and the TV source (broadcast or

AV Component

cable).

You can change the required

➢

external source simply by

Move Enter Return

pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control.

►

► ► ► ►

Channel - Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

Channels are sorted and stored in the order which reflects their position in the frequency range

P 1 102MHz 7 %

(with lowest first and highest last). The programme originally

Enter Return

selected is then displayed.

To stop the search before it has finished, press the ENTER

➢

button.

When finished, the

Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to “Channel Sort” on page 4. To exit without sorting, press the

EXIT button.

Source List

Stop

continued...

+ 5 hidden pages