COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ENG
REMOTE CONTROL
ON-SCREEN MENUS
ENJOY GAME
(depending on the model)
TELETEXT FUNCTION
(depending on the model)
2
ENG
Safety Instructions
The following illustrations represent the precautions to be taken when using and moving your television.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Caution
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Do NOT expose the television to
extreme temperature conditions or
to extreme humidity conditions.
Do NOT expose the television to
direct sunlight.
Do NOT expose the television to
any liquids.
If the television is broken, do not
try to repair it yourself. Contact
qualified service personnel.
During a storm conditions
(especially when there is lightning)
unplug the television from the
mains socket and aerial.
If the remote control is not used for
a long period of time, remove the
batteries and store it in a cool, dry
place.
WARNING: TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash and arrow
head within the triangle is a
warning sign alerting you of
“dangerous voltage” inside the
product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
➢
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
☛
The main voltage is indicated on the
rear of the TV set and the frequency is
50 or 60Hz.
10%
H
5¡
75%
35¡
H
3
ENG
Contents
◆ PREPARING YOUR TELEVISION
■
Safety Instructions ................................................................................................ 2
■
Caution ................................................................................................................. 2
■
Control Panels ...................................................................................................... 4
■
Connection Panels ............................................................................................... 5
■
Viewing Picture From External Sources ............................................................... 7
■
Infrared Remote Control (All Functions Except Teletext) ..................................... 8
■
Infrared Remote Control (Teletext Functions) ...................................................... 9
■
Inserting the Batteries in the Remote Control....................................................... 10
■
Connecting the Aerial (or Cable Television Network)........................................... 10
■
Switching Your Television On and Off.................................................................. 11
■
Placing Your Television in Standby mode ............................................................ 11
■
Plug & Play Feature (depending on the model).................................................... 12
■
Viewing the Demonstration................................................................................... 13
■
Choosing Your Language..................................................................................... 13
◆ SETTING UP THE CHANNELS
■
Storing the Channels Automatically...................................................................... 14
■
Skipping Unwanted Channels .............................................................................. 15
■
Storing the Channels Manually............................................................................. 16
■
Fine tuning Channel Reception ............................................................................ 18
■
Sorting the Stored Channels ................................................................................ 19
■
Selecting a Channel Numbered Ten or Over ....................................................... 20
◆ USING THE TELEVISION
■
Changing the Picture Standard ............................................................................ 20
■
Adjusting the Picture Settings............................................................................... 21
■
Setting the Digital Noise Reduction ...................................................................... 22
■
Setting the Blue Screen........................................................................................ 22
■
Selecting the Picture Format ................................................................................ 23
■
Using the Tilt Control Feature (depending on the model)..................................... 23
■
Changing the Sound Standard (depending on the model) ................................... 24
■
Adjusting the Sound Settings ............................................................................... 25
■
Extra Sound Settings............................................................................................ 26
- Auto Volume
- Melody
- Pseudo Stereo/Virtual Surround
- Turbo Sound
■
Selecting the Sound Mode (depending on the model) ......................................... 27
■
Adjusting the Volume............................................................................................ 28
■
Switching the Sound Off Temporarily ................................................................... 28
■
Setting the Sleep Timer (depending on the model) .............................................. 29
■
Setting and Displaying the Current Time (depending on the model).................... 30
■
Switching the Television On and Off Automatically (depending on the model) ... 31
■
Activating the Child Lock ...................................................................................... 32
■
Enjoying Games (depending on the model) ........................................................ 33
◆ USING THE TELETEXT FUNCTION (depending on the model)
■
Teletext Decoder .................................................................................................. 34
■
Displaying Teletext Information ............................................................................ 34
■
Selecting a Specific Teletext Page....................................................................... 35
■
Using FLOF to Select a Teletext Page ................................................................. 36
■
Storing Teletext Pages ......................................................................................... 36
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■
Automatic Degaussing to Remove Color Patches................................................ 37
■
Troubleshooting: Before Contacting Service Personnel....................................... 37
☛
➢
Symbols
Press Important Note
4
ENG
Control Panels
➢
The actual configuration on your TV may be different, depending on
your model.
ΠINPUT SOURCE SELECTION
´ MENU DISPLAY
ˇ VOLUME ADJUSTMENT
¨ CHANNEL SELECTION
ˆ STANDBY INDICATOR
Ø REMOTE CONTROL SENSOR
∏ POWER ON/OFF
➣
Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:
◆ Switch on the TV when it is in Standby mode and select channels ( ▼ CH ▲ )
◆ Access the main menu ( MENU )
◆ Adjust the volume ( -VOL + )
◆ Switch among Video input modes ( TV/VIDEO )
5
ENG
Connection Panels
➢
The actual configuration on your TV may be different, depending on
your model.
ΠAUDIO/VIDEO INPUT
´ HEADPHONE CONNECTOR
Side of the TV Front of the TV
ΠConnecting External A/V Devices (INPUT)
The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc
players and some video game devices.
➣
◆ When both the side (or front) and rear connectors are connected to external equipment, the side
(or front) AV has the priority.
◆ When using the mono equipment such as camcorders, video disc players and some video game
devices, connect to the “AUDIO-L” input connector.
´ Connecting Headphones
-
You can connect a set of headphones to your television if you wish to watch a television programme without
disturbing the other people in the room.
-
Prolonged use of headphones at a high volume may damage your hearing.
☛
Whenever you connect an audio or video system to your
television, ensure that all
elements are switched off.
Refer to the documentation supplied with your equipment for
detailed connection instructions and associated safety
precautions.
ENG
6
Connection Panels (continued)
➢
The actual configuration on your TV may be different, depending on
your model.
Ϋ Connecting External A/V Devices (INPUT/OUTPUT)
The connectors (RCA or SCART) are used for equipment such as video disc players, video game devices,
camcorder and VCR.
ˇ Connecting DVD
The RCA (Y + Pb + Pr + AUDIO-L and R) connectors are used for a DVD.
➣
When using the mono equipment such as camcorders, video disc players and some video game
devices, connect to the “AUDIO-L” input connector.
Rear of the TV
(
)
MONO
L-AUDIO-R
VIDEO
MONITOR
-OUT
INPUT 2
INPUT 1
(
)
MONO
L-AUDIO-R
VIDEO
MONITOR
-OUT
INPUT 2
INPUT 1
2
1
RGB
7
ENG
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1 Check that all the necessary connections have been made.
2 Switch the television on and if necessary, press the VIDEO ( )
button one or more times until the required input is displayed.
➢
Depending on the source selected, the pictures may appear
automatically.
➢
To watch television programmes again, press the TV ( )
button and select the number of the channel required.
8
ENG
Infrared Remote Control (All Functions Except Teletext)
➣
Buttons and markings are subject to change.
➣
Operation of remote control may be affected by bright artificial light near to the TV set.
POWER
SOUND MENU DISPLAY
(OPTION)
ONE/TWO-DIGIT CHANNEL
SELECTION
TURBO SOUND SELECTION
(OPTION)
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
PREVIOUS CHANNEL
DIRECT CHANNEL SELECTION
TUNER/CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
AUTOMATIC SWITCH-OFFGAME DISPLAY (OPTION)
NEXT CHANNEL
VOLUME INCREASE
PICTURE STANDARD
SOUND STANDARD (OPTION)
SOUND MODE SELECTION
(OPTION)
MENU DISPLAY
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SWITCH REPEATEDLY BETWEEN
THE LAST TWO CHANNELS
DISPLAYED
EXIT FROM ANY DISPLAY
CHANGE CONFIRMATION
PICTURE SIZE
9
ENG
Infrared Remote Control (Teletext Functions)
➣
Buttons and markings are subject to change.
TELETEXT HOLD
FASTEXT TOPIC SELECTION
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/MIX
LIST/FLOF MODE SELECTION
TELETEXT REVEAL
TELETEXT STORE
PICTURE SIZE
PROGRAMME SELECTION BY NAME
TELETEXT SUB-PAGE
10
ENG
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
Plug the aerial or cable network input cable to the 75Ω coaxial socket
on the rear of the television.
Connecting the Aerial (or Cable Television Network)
Cable
Television
Network
Rear of TV
You must insert or replace the batteries in the remote control when
you :
◆ Purchase the television.
◆ Find that the remote control is no longer operating
correctly.
1 Remove the cover of the remote control by pressing the symbol
() and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
◆ + on the battery with + on the remote control
◆-on the battery with -on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
Inserting the Batteries in the Remote Control
75Ω
11
ENG
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
2 Press the “ ” (ON/OFF) button on the front of the television.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER () button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
4 To switch your television off, press the “ ” (ON/OFF) button again
on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1 Press the POWER () button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up.
2 To switch the screen back on, simply press the POWER () button
again on the remote control.
➣
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
Switching Your Television On and Off
12
ENG
Plug & Play Feature (depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result: The message
Plug & Play
is displayed. It flickers for a
little while and then the “Language” menu is automatically
displayed.
2 Press the ▲ or ▼ button to select required language. Press the
MENU button to enter the language, and then the message
Ant.
Input Check
is displayed.
➣
If any language is not selected on the
Language
menu, the
Language
menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to “Storing the
Channels Automatically” on page 14).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the
Time
menu is
displayed.
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to “Setting and
Displaying the Current Time” on page 30).
6 When you have finished, press the MENU () button.
Result:
The message
ENJOY YOUR WATCHING
is displayed, and
then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Function
, and then
press the œ or √ button.
3 Select the
Plug & Play
by pressing the ▲ or ▼ button, and
then press the œ or √ button.
Result:
The message
Plug & Play
is displayed.
ENJOY YOUR WATCHING
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Demonstration √
Plug & Play
Ant. Input Check
Time
Clock 11 : 35
AM
P 1
471 MHz 48 %
Select Enter Exit
Auto Store Exit
Exit
Move Exit
13
ENG
Viewing the Demonstration
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Function
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Demonstration
and press
the œ or √ button.
Result:
Each of the menu options is displayed in turn.
4 When you wish to exit from the demonstration, press the EXIT ()
button.
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Function
and press the œ or
√ button.
Result:
The
Language
is selected.
3 Press the œ or √ button again.
Result:
The languages available are listed.
4 Select a particular language by pressing the ▲ or ▼ button
repeatedly.
5 When you have finished, press the EXIT () button or, press the
MENU () button repeatedly to return to normal viewing.
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Demonstration √
Select Enter Exit
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Demonstration √
Select Adjust Exit
14
ENG
Storing the Channels Automatically
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 19.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Channel
.
3 Press the œ or √ button to select the
Auto Store
.
4 Press the œ or √ button again.
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
5 When searching and storing is complete, the
Sort
menu is
displayed.
To... Then...
Sort the stored channels Go to Step 4 of the “Sorting
into the desired numerical order the Stored Channels”
procedure on page 19.
Exit the channel store function Press the MENU ()
without sorting the channels button repeatedly until the
menus isappear.
➣
If sound does not work regularly after storing channels, select
the sound system which best corresponds in
Manual Store
menu (refer to page 16~17).
Picture
Mode
œœ
Custom √
Adjust √
Digital NR : Off
Tilt : 0
Select Enter Exit
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
P 1
471 MHz 48 %
Exit
Channel
Sort
From : P 1
To : P-Store : ?
Select Adjust Exit
15
ENG
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are
displayed during scanning.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Channel
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Add/Erase
and press the œ
or √ button.
Result: The
Add/Erase
menu is displayed.
4 Press the ▲ or ▼ button to select the required channel.
5 To add or erase the desired channel by pressing the œ or √ button.
6 When you have finished adding and erasing channels, press the
EXIT () button or, press the MENU () button repeatedly to
return to normal viewing
Skipping Unwanted Channels
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Add/Erase
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
Select Adjust Exit
Channel
Add/Erase
P 1 : Erased
P 2 : Added
P 3 : Added
P 4 : Added
Select Adjust Exit
16
ENG
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found.
◆ The number by which you wish to identify each stored
channel.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Channel
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Manual Store
and press the
œ or √ button.
Result:
The “Manual Store” menu is displayed with the
Color
System
selected.
4 Press the œ or √ button repeatedly until the color is of the best
quality.
Result:
The
Color System
is changed.
AUTO ↔ PAL ↔ SECAM ↔ NTSC4.43 ↔ NTSC3.58
➣
NTSC4.43 is a “trick” playback mode used
by special VCR’s to play PAL-recorded
videos in NTSC mode.
5 Press the ▲ or ▼ button to select the
Sound System
and press the
œ or √ button repeatedly until the sound is of the best quality.
Result:
The
Sound System
is changed.
B/G ↔ I ↔ D/K ↔ M
➣
If sound does not work regularly after storing
channels, select the sound system which best
corresponds.
6 To start the search, select the
Search
and then press the œ or √
button.
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
Storing the Channels Manually
➞
➞
➞
➞
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Manual Store
Color system : AUTO
Sound system : B/G
Search : -/+
Prog. No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color system : AUTO
Sound system : B/G
Search : -/+
Prog. No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color system : AUTO
Sound system : B/G
Search : -/+
Prog. No. : 18
Store : ?
Select Adjust Exit
17
ENG
Storing the Channels Manually (continued)
7 To assign a programme number to the channel, select the
Prog.No.
. Press the œ or √ button until you find the correct
number.
8 To store the channel and associated programme number, select
the
Store
and press the œ or √ button.
Result:
OK
is displayed.
9 Repeat Steps 6 to 8 for each channel to be stored.
10 When you have finished manual storage, press the EXIT ()
button or, press the MENU () button repeatedly to return to
normal viewing
Channel
Manual Store
Color system : AUTO
Sound system : B/G
Search : -/+
Prog. No. : 18
Store : OK
Select Adjust Exit
Channel
Manual Store
Color system : AUTO
Sound system : B/G
Search : -/+
Prog. No. : 18
Store : ?
Select Adjust Exit
18
ENG
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to finetune the channel manually.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Channel
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Fine Tune
and press the œ
or √ button.
Result: The
Fine Tune
menu is displayed with the
Tune
selected.
4 To... Press the...
obtain a sharp and ◆ œ or √ button.
clear picture and Result: The horizontal bar’s
good sound quality cursor moves to the left
or right.
memorise adjusted ◆▲ or ▼ button to select the
Store
.
picture or sound ◆ œ or √ button.
Result:
OK
is displayed.
erase adjusted ◆▲ or ▼ button to select the
Erase
.
picture or sound ◆ œ or √ button.
Result:
OK
is displayed.
5 When you have finished, press the EXIT () button or, press the
MENU ( )button repeatedly to return to normal viewing.
Fine tuning Channel Reception
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : ?
Select Adjust Exit
Fine tune
Channel
Fine Tune
Tune : -/+
Store : OK
Erase : ?
Select Adjust Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : OK
Select Adjust Exit
19
ENG
You can exchange the numbers of two channels, in order to:
◆ Modify the numeric order in which the channels have
been automatically stored.
◆ Give easily remembered numbers to the channels that
you watch most often.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Channel
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Sort
and press the œ or √
button.
Result: The
Sort
menu is displayed with the
From
selected.
4 Press the œ or √ button until the channel number that you wish to
change is displayed.
Result: The selected channel’s picture is displayed.
5 Press the ▲ or ▼ button to select the
To
.
6 Press the œ or √ button until the new number by which you wish to
identify the channel is displayed.
Result: The selected channel is exchanged with the one
previously stored to the chosen number.
Example: If you select
P 1
for the
From
and
P 3
for the To:
◆ Channel 1 becomes channel 3.
◆ Channel 3 becomes channel 1.
7 To... Press the...
Confirm the exchange ◆▲ or ▼ button to select the
Store
.
of channel numbers ◆ œ or √ button.
Result:
OK
is displayed.
➣
You can exchange other
channel numbers by selecting
From
and returning to step 4.
8 When you have finished sorting channels, press the EXIT ()
button or, press the MENU () button repeatedly to return to
normal viewing
Sorting the Stored Channels
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Sort
From : P 1
To : P-Store : ?
Select Adjust Exit
Channel
Sort
From : P 1
To : P 3
Store : ?
Select Adjust Exit
Channel
Sort
From : P 3
To : P 1
Store : OK
Select Adjust Exit
20
ENG
You can select the type of picture which best corresponds to your
viewing requirements. The following picture effects are available in
the order given:
◆ Custom, Standard, Sports, Natural, Mild.
1 Press the MENU button.
Result:
The
Picture
menu is displayed.
2 Press the œ or √ button.
Result:
The
Mode
menu is selected.
3 Select to satisfy your preference by pressing the œ or √ button.
4 When you have been finished, press the EXIT () button or,
press the MENU () button repeatedly to return to normal
viewing.
➣
You can select the required picture effect by simply
pressing the “P,MODE” (Picture Mode) button on the
remote control.
Changing the Picture Standard
Picture
Mode
œœ
Custom √
Adjust √
Digital NR : Off
Tilt : 0
Select Adjust Exit
Selecting a Channel Numbered Ten or Over
When using the numeric buttons to select a channel stored at
programme position ten or higher, follow the instructions below.
1 Press the
-/--
button.
Result:
The “--” symbol is displayed.
2 Enter the two-digit channel number.
Example
: To select channel 42, press 4, followed by 2.
21
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Color Tone, Contrast, Brightness, Sharpness, Color,
Tint (NTSC only)
1 Press the MENU button.
Result:
The
Picture
menu is displayed.
2 Press the œ or √ button.
3 Press the ▲ or ▼ button to select the
Adjust
, and then press the œ
or √ button.
Result:
When select the
Mode
to
Custom
, the
Adjust
menu is
displayed.
4 To adjust the... Press the...
◆ Color Tone ◆ œ or √ button.
Result: You select the required option
(
Normal, Warm1, Warm2
,
Cool1, Cool2
).
◆ Contrast ◆ œ or √ button.
◆ Brightness Result: The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
➣
The
Sharpness
and
Tint
are not available in DVD
mode.
5 When you are satisfied with the settings, press the EXIT ()button
or, press the MENU ()button repeatedly to return to normal
viewing.
➣
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “ ”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing to Remove Color Patches” on page 37).
➣
If you make any changes to the
Adjust
settings, the picture
standard is automatically switched to
Custom
.
Contrast 100
Picture
Mode
œœ
Custom √
Adjust √
Digital NR : Off
Tilt : 0
Select Enter Exit
Picture
Adjust
Color Tone: Normal
Contrast 100
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
Picture
Adjust
Color Tone: Normal
Contrast 100
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
22
ENG
If the signal received by your television is weak, you can activate
the Digital Noise Reduction feature to help reduce any static and
ghosting that may appear on the screen.
1 Press the MENU button.
Result:
The
Picture
menu is displayed.
2 Press the œ or √ button.
3 Press the ▲ or ▼ button to select the
Digital NR
.
4 Select the required option (
On/Off
)
by pressing the
œ or √
button.
➣
Not available in DVD mode.
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue screen” mode to “Off”.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Function
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Blue Screen
.
4 Select the required option (
On/Off
)
by pressing the
œ or √
button.
Setting the Digital Noise Reduction
Setting the Blue Screen
Picture
Mode
œœ
Custom √
Adjust √
Digital NR : On
Tilt : 0
Select Adjust Exit
Function
Language : English
Time √
Plug & Play √
Blue Screen : On
Child Lock √
Demonstration √
Select Adjust Exit
23
ENG
You can select the picture format which best corresponds to your
viewing requirements by simply pressing the “P.SIZE ( )”(Picture
size) button on the remote control.
Depending on the model, the following picture formats are
available in the order given:
◆ Normal
◆ Zoom
◆ 16:9
Selecting the Picture Format
Using the Tilt Control Feature (depending on the model)
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1 Press the MENU button.
Result: The
Picture
menu is displayed.
2 Press the œ or √ button.
3 Press the ▲ or ▼ button to select the
Tilt
.
4 To adjust the
Tilt
(±7) by pressing the + or – button.
5 When you are satisfied with the settings, press the EXIT ()
button, or press the MENU () button repeatedly to return to
normal viewing.
Picture
Mode
œœ
Custom √
Adjust √
Digital NR : Off
Tilt : 0
Select Adjust Exit
24
ENG
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast. The following sound effects are
available in the order given:
◆ Custom, Standard, Music, Movie, Speech.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Sound
and press the œ or √
button.
Result:
The
Mode
menu is selected.
3 Select to satisfy your preference by pressing the œ or √ button.
4 When you have been finished, press the EXIT () button or,
press the MENU () button repeatedly to return to normal
viewing.
➣
You can select the required sound effect by simply pressing
the “S.MODE” (Sound Mode) button on the remote
control.
Sound
Mode
œœ
Custom
√
Adjust
√
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Virtual Surround : Off
Select Adjust Exit
25
ENG
The sound settings can be adjusted to suit your personal preferences.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Sound
and press the œ or √
button.
3 Press the ▲ or ▼ button to select the
Adjust
(or
Equalizer
).
➣
When select the
Mode
to
Custom
, the
Adjust
(or
Equalizer
) menu is displayed.
4 Press the œ or √ button.
Result:
The “Adjust” (or
Equalizer
) menu is displayed.
5 Select the required option and adjust to satisfy your preference.
6 When you are satisfied with the settings, press the EXIT ()button
or, press the MENU () button repeatedly to return to normal
viewing.
➢
You can display the sound adjust menu directly by pressing
the “S.MENU” (Sound Menu) button on the remote control.
Adjusting the Sound Settings (depending on the model)
Balance L 49 R 51
Sound
Mode
œœ
Custom
√
Adjust
√
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Virtual Surround : Off
Select Enter Exit
Sound
Adjust
Bass 50
Treble 50
Balance L 50 R 50
Select Adjust Exit
Sound
Mode
œœ
Custom
√
Equalizer
√
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Virtual Surround : Off
Select Enter Exit
Equalizer
Adjust Move Exit
R
L
100 300 1K 3K 10K
26
ENG
Extra Sound Settings
The following sound settings can be adjusted to suit your personal
preferences.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every
time the channel is changed. “Auto Volume” lets you
automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation
signal is low.
◆ Melody
You can hear clear melody sound when the TV is
powered ON or OFF.
◆ Pseudo Stereo / Virtual Surround
Pseudo Stereo
converts a monaural sound signal into
two identical left and right channels.
Once the
Pseudo Stereo
or
Virtual Surround
is set to
On
or
Off
, the setting applies to the sound effects such as
Standard, Music, Movie and Speech.
◆ Turbo Sound
On- Plus- Off
You can enjoy more magnificent and dynamic sound
when watching music, movie or other channel.
Turbo
Sound
suitably emphasizes both higher and lower bands
of sound (and includes other effects).
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Sound
and press the œ or √
button.
3 To... Press the...
Change an option ▲ or ▼ button.
Select the required option (On/Off) œ or √ button.
4 When you are satisfied with the settings, press the EXIT ()
button or, press the MENU () button repeatedly to return to
normal viewing.
➢
You can select the turbo sound by simply pressing the
“TURBO” button on the remote control.
➢
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol ( ) are trademarks of Dolby
Laboratories.
Sound
Mode
œœ
Custom
√
Adjust
√
Auto Volume : On
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Virtual Surround : Off
Select Adjust Exit
Sound
Mode
œœ
Custom
√
Adjust
√
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Virtual Surround : Off
Select Adjust Exit
Sound
Mode
œœ
Custom
√
Adjust
√
Auto Volume : Off
Melody : Off
Pseudo Stereo : On
Turbo Sound : Off
Virtual Surround : Off
Select Adjust Exit
Sound
Mode
œœ
Custom
√
Adjust
√
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Turbo Sound : On
Virtual Surround : Off
Select Adjust Exit
Sound
Mode
œœ
Custom
√
Adjust
√
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Turbo Sound : Off
Virtual Surround : On
Select Adjust Exit
27
ENG
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and
output of the audio signal. When power is switched ON, the mode
is automatically preset to either “Dual-I” or “Stereo”, depending
on the current transmission.
➣
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the “Mono” position using the
DUAL I-II button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the
“Mono” mode.
◆ When receiving mono sound in the AV mode, connect to
the “L” input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
Mono (Normal use)
Mono
↔
Mono
Nicam (Normal)
Stereo
↔
Mono
Nicam (Normal)
Mono (Normal use)
Dual-I
↔
Dual-II
Stereo
↔
Mono
(Forced Mono)
Dual-I
→ Dual-II → Mono
Nicam Nicam (Normal)
NICAM
Stereo
A2
Stereo
→
→
28
ENG
Switching the Sound Off Temporarily
You can switch the sound off temporarily, for example you may
wish to answer the telephone.
1 Press the MUTE () button.
Result:
The sound is switched off and “ ” is displayed.
2 When you wish to turn the sound back on at the same volume as
before, press the MUTE () button again (or either of the volume
buttons).
You can adjust the volume by pressing the + or -button on the
remote control.
◆ Press the button to increase the volume (cursor moves to the right)
◆ Press the button to decrease the volume (cursor moves to the left)
➣
The volume setting is retained:
◆ When you switch the television to standby mode
◆ When you switch the television off using the “”
(ON/OFF) button on the front panel
◆ If there is a power failure.
Adjusting the Volume
29
ENG
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode by
pressing the “SLEEP ( )” button.
1 Press the SLEEP ()button on the remote control.
Result:
If the sleep timer is... The screen displays...
Already set Time remaining before the television
will be placed in standby mode.
Not yet set Word
Off
.
2 Press the SLEEP () button repeatedly and cycle through the
preset time intervals (30, 60, 90, 120, 150, 180).
Result:
The television automatically switches to standby mode
when the timer reaches 0.
3 To cancel the sleep timer function, press the SLEEP () button
repeatedly and select
Off
.
Setting the Sleep Timer (depending on the model)
30
ENG
You can set the television’s clock so that the current time is displayed
when you press the “INFO ( )” button.
You must also set the time if you wish to use the automatic On/Off
timers.
➣
The clock setting will be re-activated when pressing the
“” (ON/OFF) button on the front panel.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Function
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Time
, and press the œ or √
button.
Result:
The
Time
menu is displayed with the
Clock
selected.
4 To... Press the...
Move to the hour or minute œ or √ button.
Set the hour or minute ▲ or ▼ button.
5 When you have finished, press the EXIT () button or, press the
MENU () button repeatedly to return to normal viewing.
6 To display the... Press the “INFO ()” button...
Channel information Once.
Current time Twice.
7 To remove the display, press the INFO ()button again.
Setting and Displaying the Current Time
(depending on the model)
Function
Time
Clock 11 : 00 AM
Timer Off
Select Move Exit
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Demonstration √
Select Enter Exit
31
ENG
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of
your choice at the time you select
◆ Switch off automatically at the time you select
➣
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the
previous page). If you have not yet set the clock,
the message
Set the clock first
is displayed.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Function
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Time
, and press the œ or √
button.
Result: The
Time
menu is displayed.
4 Press the ▲ or ▼ button to select the
Timer
.
5 Press the œ or √ button to set the mode to
On
.
Result: The
On Time
and
Off Time
options are displayed.
6 Press the ▲ or ▼ button to select the
On Time
.
7 Set the time at which you wish the television to be switched On.
To... Press the...
Move to the hour or minute œ or √ button.
Adjust the hour or minute ▲ or ▼ button.
8 In the same way, set the time at which you wish the television to be
switched Off.
9 When you have finished setting the On/Off time, press the EXIT
() button or, press the MENU () button repeatedly to return to
normal viewing.
➣
Absent Power Off
If no function buttons (including remote control buttons
or front panel buttons) are operated for three hours after
the TV is turned on by
On time
, the TV will be
automatically turned off.
Switching the Television On and Off Automatically (depending on the model)
Function
Time
Clock 11 : 35 AM
Timer Off
Select Adjust Exit
Function
Time
Clock 11 : 35 AM
Timer On
On time -- : --
AM
Off time -- : --
AM
Select Adjust Exit
Function
Time
Clock 11 : 35 AM
Timer On
On time
07 : 00 AM
Off time -- : --
AM
Select Adjust Exit
Function
Time
Clock 11 : 35 AM
Timer On
On time
07 : 00 AM
Off time
11 : 00 PM
Select Adjust Exit
32
ENG
You can restrict viewing by locking the channels of your choice.
Example
: You can prevent your children from watching
unsuitable programmes.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the
Function
and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Child Lock
and press the œ
or √ button.
Result
: The
Child Lock
menu is displayed.
4 Set to
On
by pressing the œ or √ button.
➣
If you want to unlock a channel, set
Off
.
5 Press the ▲ or ▼ button to select the
Prog.No.
. Select the
number of the channel to be locked by pressing the œ or √ button.
6 Press the ▲ or ▼ button to select the
Lock
and press the œ or √
button.
Result
:
Locked
is displayed.
7 When you have finished, press the EXIT () button or, press the
MENU () button repeatedly to return to normal viewing.
➣
If any channel is locked, you can not enter the “Channel”
menu by using the control buttons on the television, and
the message “Not available” is displayed. You can access
by using the remote control only.
Activating the Child Lock
Child Lock : Locked
Function
Child Lock
Child Lock
: Off
Select Adjust Exit
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Demonstration √
Select Enter Exit
Function
Child Lock
Child Lock
:On
Prog.No. : 1
Lock : ?
Select Adjust Exit
Function
Child Lock
Child Lock
:On
Prog.No. : 1
Lock : Locked
Select Adjust Exit
P 1
33
ENG
You can enjoy the game (Chicken Farm), programmed in this TV.
1 Press the GAME button to enter the Game mode.
Result: The
READY
window will be displayed.
2 Press the œ or √ button to run the game.
3 Move the farmer to catch eggs by using the œ or √ button. Every
time the scores go up, the speed of game becomes faster bit by bit.
4 Every time you catch fifty eggs (i.e., 50, 100, 150 ...), if any broken
egg exists, one egg can be restored. When five eggs are lost, the
game will be over and simultaneously the final score window will be
displayed.
5 If you want to stop during the game, press the MENU button. Then,
the final score window will be displayed.
6 If you want to re-start the game, press the MENU, œ or √ button.
Then, the final score window will be switched to the
READY
window.
7 To exit the Game mode, press the GAME button.
Enjoying Games (depending on the model)
READY
SCORE 0
SCORE 16
34
ENG
Most television channels carry “teletext,” pages of written
information that provide information such as:
◆ Television programme times
◆ News bulletins
◆ Weather forecasts
◆ Sports results
The teletext pages are organized according to six categories:
Part Contents
A Selected page number.
B Broadcasting station identity.
C Current page number or search status
D Date and time.
E Text.
F Status information.
You can display teletext information at any time, but signal
reception must be good. Otherwise:
◆
Information may be missing
◆
Some pages may not be displayed
To activate the teletext mode and display the contents page:
1 Using the or button, select the channel providing the
teletext service.
2 Press the TTX/MIX () button to activate the teletext mode.
Result: The contents page (page 100) is displayed. It can be
redisplayed at any time by pressing the (index)
button.
3 To display the actual broadcast simultaneously with the teletext
page, press the TTX/MIX () button.
4 To return to normal viewing press the TV ()button.
Teletext Decoder (depending on the model)
Displaying Teletext Information (depending on the model)
35
ENG
Press the number buttons on the remote control to enter the page
number directly:
1 Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
Result
: The current page counter is incremented and the page is
then displayed.
2 If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the (hold). Press the (hold) again to
resume.
3 Using the various display options:
To display... Press the...
◆ Both teletext information and TTX/MIX ()
the normal broadcast
◆ Hidden text (reveal)
(answers to quiz games, for example)
◆ The normal screen (reveal) again
◆ A secondary page, (sub-page)
by entering its 4-digit number
◆ The next page (page up)
◆ The previous page (page down)
◆ Double-size letters in the: (size)
• Upper half of the screen ◆ Once
• Lower half of the screen ◆ Twice
◆ Normal screen ◆ Three times
Selecting a Specific Teletext Page (depending on the model)
36
ENG
Up to four teletext pages can be stored.
1 Select the LIST mode.
Result:
Four 3-digit numbers are displayed in different colors at
the bottom of the screen.
2 Press the colored button corresponding to the page that will be
replaced.
3 Enter the new page number using the numeric buttons.
4 Repeat steps 2 and 3 for each page to be stored, using a different
colored button each time.
5 Press the (store) button until the corresponding blocks are
displayed in white.
➣
The button is used to switch between:
◆ LIST mode
◆ FLOF mode
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1 Display the teletext contents page by pressing the TTX/MIX ()
button.
2 Press the colored button corresponding to the topic that you wish
to select (The available topics are listed on the status information
line).
Result:
The page is displayed with additional color-coded
information that can be selected in the same way.
3 To display the: Press the:
Previous page Red button.
Next page Green button.
4 When you have finished, press the TV ()button to return to the
normal broadcast.
Using FLOF to Select a Teletext Page
(depending on the model)
Storing Teletext Pages (depending on the model)
37
ENG
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ ” (ON/OFF) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the MUTE () button has been pressed on the
remote control.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the television
and move it further away.
◆ Plug your television into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture,
distorted sound
Remote control malfunctions
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (ON/OFF) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss
function can be activated, and then press the POWER ( ) button on the remote control.
☛
If your television will be left unattended, press the “ ” (ON/OFF) button to turn your
television off.
Automatic Degaussing to Remove Color Patches
38
ENG
Memo
39
ENG
Memo
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
AA68-03045A-00
Loading...