Samsung CS-21B850F3, CS-21B501HU User Manual

COLOUR TELEVISION

CS21Z45ZGQ/CS21Z47ZGQ/ CS21Z43ZGQ/CS21A550MU/ CS21A551MU/CS21B501HU

Connection Panel (depending on the model)

The product colour and shape may vary depending on the

➢

model.

Rear Panel

Front (or Side) Panel

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

Record your Model and Serial number.

▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

The product colour and shape may vary depending on the

➢

model.

Front (or Side) Panel

1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Standby indicator 6 Power on/off

 You can use the 3 buttons to switch the TV on when it is

in standby mode depending on the model.

 The 2 and 3 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

cable television network

Whenever you connect an audio or video system to your

☛

television, ensure that all elements are switched off.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1 (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

Connecting to the SCART Input/Output

The SCART2 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART2 is also used for equipment with an RGB output, such as a video game device or video disc player.

1 Audio input

2 Video input

3 Headphone jack

Connecting to the RCA Input

The 1 (AUDIO-L/R or AUDIO) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

Connecting Headphones

The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing.

When both the front (or side) AV and rear connectors are

➢

connected to external equipment, the front (or side) AV receives priority.

English - 1

continued...

AA68-03992F-00

Remote Control (depending on the model)

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

1 POWER

Used to switch the TV on and off.

2 MENU

Used to display the on-screen menu or return to the previous menu.

3 ▲/▼/◄/►

Used to control the cursor in the menu.

P < / >

Used to display the next or previous stored channel

= + / -

Used to increase or decrease the volume.

4 MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, = + or = - button.

5 Numeric buttons

Used to select channels directly.

6 INFO

Used to view the channel information and setting status you selected.

7 SOURCE

Used to display all of the available video sources.

8 TOOLS (depending on

the model) You can check the

following selection by pressing Tools button.

1. Sleep Timer(Used to select a preset time interval for automatic turn off.)

2. Picture Mode(Used to select the picture effect.)

3. Sound Mode(Used to select sound effect.)

4. Dual I-II(Used to select sound mode.)

5. Turbo Sound(Used to select the turbo sound option.)

6. Sound Adjust(Used to display the sound menu)

9 ENTER

While using the onscreen menus, press the ENTER button to activate (or change) a particular item.

0 EXIT

Used to exit from any display or return to normal viewing.

! PRE-CH

Used to switch repeatedly between the last two channels displayed.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “–” ends of the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

Turning the TV On and Off

Press the POWER button,or P</> button, or Numeric button on the remote control. You can also use the P button on the TV.

Caution: One pole switch is totally not off (one line still live)

➢

if power cord is not unplugged.

continued... continued...

English - 2

English - 3

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and

Setup.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Setup - Plug & Play (depending on the model)

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in standby

mode, press the POWER button on the remote control. The message Start Plug & Play is displayed. To start Plug & Play, press the ENTER button. The Language menu is displayed.

The Language menu will

➢

automatically appear after several seconds, even if the ENTER button is not pressed.

2 Select the appropriated

language by pressing the

▲ or ▼ button. Press the

ENTER button. The Check antenna input. is displayed.

If any language is not selected, the language menu

➢

will disappear about 30 seconds later.

Plug & Play

Start Plug & Play.

Enter Exit

Plug & Play

Language

English

Pусcкий

Move Enter Skip

Plug & Play

Check antenna input.

Enter Skip

continued...

3 To search the channels,

press the ENTER button. To stop the search, press the ENTER button. When the channel searching has finished, the Clock Set menu is displayed.

4 Press the ◄ or ► button to

move to the hour or minute. Set the hour or minute by

pressing the ▲ or ▼ button.

5 When you have finished,

press the MENU button. The Enjoy your watching. is displayed, and then the channel which has been stored will be activated.

Re-setting the Plug & Play

Method:

MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play)  ENTER

Plug & Play

Auto Store

Start

Enter Skip

Plug & Play

Auto Store

P 1 102MHz 7 %

Stop

Enter Skip

Plug & Play

Clock Set 0 0 : 0 0

Move Enter

Adjust Skip

Enjoy your watching.

Plug & Play

Language : English Time Child Lock Blue Screen : Off

Move Enter Return

Setup

Input - Source List

You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top box,

Ext.

and the TV source (broadcast or cable).

You can change the required

➢

source simply by pressing

Move Enter Return

the SOURCE button on the remote control. It might take a short period of time for pictures to be switched.

►

► ► ► ►

Channel - Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

Channels are sorted and stored in the order which reflects their position in the frequency range

P 1 102MHz 7 %

(with lowest first and highest last). The programme originally

Enter Return

selected is then displayed.

To stop the search before it has finished, press the ENTER

➢

button.

When finished, the Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to “Channel - Sort” on page 4. To exit without sorting, press the EXIT button.

Source List

Stop

+ 5 hidden pages