Samsung CS-21V10MG, CS-21M16ML, CS-21M16MK, CS-21H4MJ, CS-17K10MJ User Manual
...
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
ENJOY GAME
(depending on the model)
TELETEXT FUNCTION
(depending on the model)
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 1
2
ENG
Safety Instructions
Caution
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION
WARNING:
TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
!
☛
The main voltage is indicated on the rear
of the TV set and the frequency is 50 or
60Hz.
◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
◆ Do not expose the television to direct sunlight and other sources of heat.
◆ Do not expose the television to any liquids.
◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
◆ During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
◆ Do not step on or twist the power cord.
◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
◆ If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
◆ If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.
◆ Do not drop the remote control.
This device is not for use in industrial environments.
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 2
3
ENG
Contents
◆ PREPARING YOUR TELEVISION
■
Safety Instructions ......................................................................................... 2
■
Caution .......................................................................................................... 2
■
Front Panel Controls (depending on the model)........................................... 4
■
Using the Buttons on the Front Panel............................................................ 4
■
Connection Panels ........................................................................................ 5
■
Infrared Remote Control (All Functions Except Teletext) .............................. 6
■
Infrared Remote Control (Teletext Functions) ............................................... 7
■
Inserting the Batteries in the Remote Control................................................ 8
■
Connecting the Aerial (or Cable Television Network).................................... 8
■
Switching Your Television On and Off........................................................... 9
■
Placing Your Television in Standby mode..................................................... 9
■
Plug & Play Feature (depending on the model)............................................. 10
■
Choosing Your Language.............................................................................. 11
◆ SETTING UP THE CHANNELS
■
Storing the Channels Automatically............................................................... 12
■
Selecting a Channel Numbered Ten or Over ................................................ 12
■
Storing the Channels Manually...................................................................... 13
■
Skipping Unwanted Channels ....................................................................... 14
■
Fine tuning Channel Reception ..................................................................... 15
■
Sorting the Stored Channels ......................................................................... 16
◆ USING THE TELEVISION
■
Changing the Picture Standard ..................................................................... 17
■
Selecting the Picture Format (depending on the model) ............................... 17
■
Adjusting the Picture Settings ....................................................................... 18
■
Changing the Sound Standard (depending on the model) ............................ 19
■
Adjusting the Sound Settings (depending on the model) .............................. 20
■
Adjusting the Volume (depending on the model)........................................... 20
■
Extra Sound Settings (depending on the model)........................................... 21
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound)
■
Selecting the Sound Mode (depending on the model) .................................. 22
■
Switching the Sound Off Temporarily ............................................................ 23
■
Setting the Sleep Timer (depending on the model)....................................... 23
■
Setting and Displaying the Current Time (depending on the model)............. 24
■
Switching the Television On and Off Automatically (depending on the model)
... 25
■
Activating the Child Lock ............................................................................... 26
■
Setting the Blue Screen Mode....................................................................... 27
■
Enjoying Games (depending on the model) .................................................. 28
◆ USING THE TELETEXT FUNCTION (depending on the model)
■
Teletext Decoder ........................................................................................... 29
■
Displaying Teletext Information ..................................................................... 29
■
Selecting a Specific Teletext Page................................................................ 30
■
Using FLOF to Select a Teletext Page.......................................................... 31
■
Storing Teletext Pages .................................................................................. 31
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■
Viewing Pictures From External Sources ...................................................... 32
■
Connecting to the Audio/Video Input/Outputs ............................................... 33
■
Automatic Degaussing to Remove Color Patches......................................... 34
■
Troubleshooting: Before Contacting Service Personnel................................ 34
☛
➢
Symbols
Press Important Note
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 3
4
ENG
Front Panel Controls (depending on the model)
➣
Buttons and markings are subject to change.
Using the Buttons on the Front Panel
If your remote control no longer works or you have lost it, you can
use the controls on the front panel of the television to:
◆ Switch on the television when it is in Standby mode and
select channels
( ▼ CH ▲ )
◆ Access the main menu ( MENU )
◆ Adjust the volume ( -VOL + )
Buttons on the front panel have the same function as corresponding
buttons on the remote control.
!!
MENU DISPLAY
@@
VOLUME ADJUSTMENT
##
CHANNEL SELECTION
$$
REMOTE CONTROL SENSOR
%%
STAND-BY INDICATOR
^^
POWER
KS1A(TM75)ENG_asia(03121A) 11/13/03 10:13 AM Page 4
1
1
2
2
1
2
3
3
3
4
4
5
6
5
5
4
6
6
5
ENG
Connection Panels
➢
The actual configuration on your TV may be different, depending on
your model.
Rear of TV
A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR
B) 75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
C) RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
OUTPUT
INPUT
VIDEO AUDIO
OUTPUT
INPUT
VIDEO AUDIO
RCA AUDIO/VIDEO INPUT
CONNECTORS
Front (or Side) of TV
➢
Connecting earphones ( ) /headphones ( )
◆ You can connect a set of earphones/headphones to your television if you wish to watch a
television programme without disturbing the other people in the room.
◆ Prolonged use of earphones/headphones at a high volume may damage your hearing.
INPUT
MONITOR
-OUT
VIDEO AUDIO
INPUT
MONITOR
-OUT
VIDEO
(
MONO
)
L-AUDIO-R
B
A
C
C
B
C
B
C
B
B
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 5
6
ENG
Infrared Remote Control (All Functions Except Teletext)
➣
Operation of remote control may be affected by bright artificial light near to the TV set.
POWER
SOUND MENU DISPLAY
(OPTION)
ONE/TWO-DIGIT CHANNEL
SELECTION
TURBO SOUND ON/OFF
(OPTION)
TEMPORARY SOUND SWITCH-
OFF
VOLUME DECREASE
PREVIOUS CHANNEL
DIRECT CHANNEL SELECTION
TUNER/CABLE NETWORK
SELECTION
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
AUTOMATIC SWITCH-OFFGAME DISPLAY (OPTION)
NEXT CHANNEL
VOLUME INCREASE
PICTURE STANDARD
SOUND STANDARD (OPTION)
SOUND MODE SELECTION
(OPTION)
MENU DISPLAY
➣
Buttons and markings are subject to change.
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
EXIT FROM ANY DISPLAY
CHANGE CONFIRMATION/
PICTURE SIZE
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 6
7
ENG
Infrared Remote Control (Teletext Functions)
TELETEXT HOLD
FASTEXT TOPIC SELECTION
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/MIX
LIST/FLOF MODE SELECTION
TELETEXT REVEAL
TELETEXT STORE
PICTURE SIZE
PROGRAMME SELECTION BY
NAME
➣
Buttons and markings are subject to change.
TELETEXT SUB-PAGE
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 7
8
ENG
You must insert or replace the batteries in the remote control when
you :
◆ Purchase the television.
◆ Find that the remote control is no longer operating
correctly.
1 Remove the cover of the remote control by pressing the symbol
() and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
◆ + on the battery with + on the remote control
◆-on the battery with -on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Plug the aerial or cable network input cable to the 75Ω coaxial socket
on the rear of the television.
Inserting the Batteries in the Remote Control
Connecting the Aerial or Cable Television Network
Cable
Television
Network
or
Rear of TV
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 8
75Ω
9
ENG
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
2 Press the “ ” (ON/OFF) button on the front of the television.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER () button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
4 To switch your television off, press the “ ” (ON/OFF) button again
on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1 Press the POWER () button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up.
2 To switch the screen back on, simply press the POWER () button
again on the remote control.
➣
You can also switch on by pressing the P or button.
➣
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
Switching Your Television On and Off
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 9
10
ENG
Plug & Play Feature (depending on the model)
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result: The message
Plug & Play
is displayed. It flickers for a
little while and then the
Language
menu is automatically
displayed.
2 Press the ▲ or ▼ button to select required language. Press the
MENU () button to enter the language, and then the message
Ant. Input Check
is displayed.
➣
If any language is not selected on the
Language
menu, the
Language
menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to
Storing the
Channels Automatically
on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the
Time
menu is
displayed.
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to
Setting
and Displaying the Current Time
on page 24).
6 When you have finished, press the MENU () button.
Result:
The message
ENJOY YOUR WATCHING
is displayed, and
then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU () button.
2 Press the ▲ or ▼ button to select the
Function
, and then
press the œ or √ button.
3 Select the
Plug & Play
by pressing the ▲ or ▼ button, and
then press the œ or √ button.
Result:
The message
Plug & Play
is displayed.
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Plug & Play
ENJOY YOUR WATCHING
Select Enter Exit
P 1
471 MHz 48 %
Exit
Ant. Input Check
Auto Store Exit
Language
Engllish
Indonesia
Malaysia
Adjust Select
Time
Clock - - : - - am
Move Exit
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 10
11
ENG
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1 Press the MENU () button.
2 Press the ▲ or ▼ button to select the
Function
.
3 Press the œ or √ button to select the
Language
.
4 Select a particular language by pressing the œ or √ button
repeatedly.
5 When you have finished, press the EXIT ()button or, press the
MENU () button repeatedly to return to
normal viewing.
Picture
Mode
œœ
Custom √
Adjust √
Size : Normal
Select Enter Exit
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Select Adjust Exit
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 11
Loading...