Samsung CS-14B501KJ, CS-21B850FL, CS-14B500KT, CS-21B501HL, CS-21B500HL User Manual

...
COLOUR TELEVISION
FM
CS 21Z45/21Z47/21Z43/21Z50/
21Z57/21Z55/21Z58/21AF0/ 21AE0/21AJ0/21AM0/21AD0/ 21BA0/21BE0/21BF0 /21BH0/ 21BM0/21AB0/21AS0/14BK0
Owner’s Instructions
Connection Panel (depending on the model)
The product colour and shape may vary depending on the model.
Rear Panel
or
or
cable television network
Before operating, please read this manual thoroughly,
Register your product at www.samsung.com/global/register.
and retain it for future reference.
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________
Control Panel (depending on the model)
The product colour and shape may vary depending on the
model.
Front (or Side) Panel
1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Standby indicator 6 Power on/off
You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
The 2 and 3 buttons also have the same function as the
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the television.
cable television network
or
cable television network
or
cable television network
or
cable television network
or
FM ANT
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off. Please be sure to match the colour coded input terminals and
cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a recording VCR or audio system.
Connecting to the RCA Input
The RCA34 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L of 3 input connector.) The RCA5 connectors are used for equipment such as a DVD with component output. (480i/576i)
You can press TOOLS button to enter DUAL I-II to choose
Mono or Stereo.
Connecting to the FM signal Input
The 6 is used for FM listening,Connect to the FM radio antenna.
Do not connect RCA Video to FM ANT terminal
cable television network
continued...
English - 1
continued...
AA68-03999B-02
Remote Control (depending on the model)
Front (or Side) Panel
1 Audio input 2 Video input 3 Headphone jack
1
2 3
1
2
3
1
2 3
1
2
1
2
1
2
Operation of remote control may be affected by bright
artificial light near to the TV.
4 MUTE
Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, = + or = - button.
5 Numeric buttons
Used to select channels directly.
6 INFO
Used to view the channel information and setting status you selected.
7 SOURCE
Used to display all of the available video sources.
8 TOOLS (depending on
the model) You can check the
following selection by pressing Tools button.
1. Sleep Timer(Used to select a preset time interval for automatic turn off.)
2. Picture Mode(Used to select the picture effect.)
3. Sound Mode(Used to select sound effect.)
4. Dual I-II(Used to select sound mode.)
5. Turbo Sound(Used to select the turbo sound option.)
6. FM Radio(Depending on the model)(used to select FM on or off)
7. Sound Adjust(Used to display the sound menu)
9 ENTER
While using the on­screen menus, press the ENTER button to activate (or change) a particular item.
0 EXIT
Used to exit from any
display or return to normal viewing.
! PRE-CH
Used to switch repeatedly between the last two channels displayed.
Connecting to the RCA Input
The 1 (AUDIO-L/R or AUDIO) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.
Connecting Headphones
The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing.
When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
1 POWER
Used to switch the TV on and off.
2 MENU
Used to display the on­screen menu or return to the previous menu.
English - 2
3 ▲/▼/◄/►
Used to control the cursor in the menu.
P < / >
Used to display the
next or previous stored
channel
= + / -
Used to increase or decrease the volume.
continued...
Installing Batteries
Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “–” ends of the batteries are inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
English - 3
Turning the TV On and Off
Press the “ POWER ” button,or P</> button, or Numeric button on the remote control. You can also use the “ P ” button on the TV.
Caution: One pole switch is totally not off (one line still live)
if power cord is not unplugged.
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play (depending on the model)
When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
1 If the television is in standby
mode, press the POWER button on the remote control.
The message Start Plug & Play. is displayed. To start Plug & Play, press the ENTER button. The Language menu is displayed.
The Language menu will
automatically appear after several seconds, even if the ENTER button is not pressed.
2 Select the appropriated
language by pressing the
▲ or ▼ button. Press the
ENTER button. The Check antenna input.
is displayed.
If any language is not selected, the language menu
will disappear about 30 seconds later.
Plug & Play
Start Plug & Play.
OK
Enter Exit
Plug & Play
Language
English
Français
Indonesia Melayu
Türkçe
Move Enter Skip
Plug & Play
Check antenna input.
OK
Enter Skip
continued...
3 To search the channels,
press the ENTER button. To stop the search, press the ENTER button. When the channel searching has finished, the Clock Set menu is displayed.
4 Press the ◄ or ► button to
move to the hour or minute. Set the hour or minute by
pressing the ▲ or ▼ button.
5 When you have finished,
press the MENU button. The Enjoy your watching. is displayed, and then the channel which has been stored will be activated.
Re-setting the Plug & Play
Method:
MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play) ENTER
Plug & Play
Auto Store
Start
Enter Skip
Plug & Play
Auto Store
P 1 102MHz 7 %
Stop
Enter Skip
Plug & Play
Clock Set 1 2 : 0 0 a m
Move Enter
Adjust Skip
Enjoy your watching.
OK
TV
Plug & Play
Language : English Time Child Lock Blue Screen : Off
Move Enter Return
Setup
► ► ► ►
Input - Source List (depending on the model)
You can switch between viewing signal from connected equipment,
such as a VCR, DVD, set-top box,
and the TV source (broadcast or
TV
TV
AV 1 AV 2 Co m po n e nt
cable).
You can change the required
source simply by pressing
Move Enter Return
the SOURCE button on the remote control. It might take a short period of time for pictures to be switched.
Source List
Channel - Sort
This operation allows you to change the programme numbers of stored channels. This operation may be necessary
TV
From : P 1
To : P-­Store : ?
after using auto store.
Move Adjust Return
From : Channel number to be
changed.
To : New channel number to be identified.Store : Confirmation the exchange of channel numbers.
Sort
Channel - Add/Delete
You can exclude channels you
have chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you did not specifically choose to skip are displayed during scanning.
Method:
ENTER : Select Added or Deleted
TV
▲ More
P 1 : Added
P 2 : Added P 3 : Added P 4 : Added P 5 : Added
▼ More
Move Enter Return
Add/Delete
Channel - Auto Store
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
Channels are sorted and stored in the order which reflects their position in the frequency range
P 1 102MHz 7 %
(with lowest first and highest last). The programme originally selected is then displayed.
To stop the search before it has finished, press the ENTER
button.
When finished, the Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to “Channel ­Sort” on page 4. To exit without sorting, press the EXIT button.
Search
Stop
Enter Return
Channel - Manual Store
Manual Store
You can store channels, including those received via cable networks. When storing channels manually, you can choose:
– Whether or not to store each of
the channels found
– The programme number of
each stored channel which you wish to identify
Programme (Programme number to be assigned to a
channel)
Colour System : AUTO / PAL / SECAM / NTSC4.43 /
NTSC3.58
Sound System : BG / DK / I / MSearch (When you do not know the channel numbers)
The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated
programme number)
If there is no sound or abnormal sound, re-select the
sound standard required.
English - 4
TV
Programme : P 3
Colour System : AUTO Sound System : BG Search : 46MHz Store : ?
Move Adjust Return
Channel - Fine Tune
If the reception is clear, you do
► ►
not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually.
Method:
◄/► : You can obtain a sharp and clear picture and good
sound quality.
▲/▼ ENTER : You can reset the setting. ENTER : You can memorise adjusted picture or sound.
Fine Tune
P 1 0
Reset
Move Save
Adjust Return
English - 5
Channel - LNA (depending on the model)
Channel
When a weak broadcast signal causes an unclear, noisy picture, the “LNA” feature improves the picture quality by setting to
“On”. If you experience noise
on a certain noise on a certain channel, set the the “LNA” to
TV
Auto Store
Manual Store Add/Delete Fine Tune Sort
LNA : On
Move Enter Return
On” or “Off” for this channel, to obtain the optimum picture.
Method: ENTER : On/Off
Setting the FM Radio (depending on the model)
You can listen to FM radio.
1. Press the MENU button to
TV
Source List FM Radio
display the menu. Press
the ▲ or ▼ button to select
"FM Radio", then press the ENTER button.
You can select the options by pressing TOOLS button to
enter FM Radio.
2. Press "MENU" and You can
see this window,and press ►
then ENTER ,
3. FM is searching as the follow window
Move Enter ExitExit
FM Radio
Search
Add/Delete
Move Enter Exit
ENTER:Select added or Deleted
CH 1 87.50MHz
Scan Fine Tune
E Auto Store Exit
4. After FM radio search finished,It will display CH1 Then you can press P < / > select your listening.
When you finish your listening,you can press TOOLS button and
Press the ▼ button to select “FM Radio”, then press ► ,Quit FM.
This FM Radio model can not
support AM listening.
Sound Mode ◄ Standard ►
FM Radio ◄ on
Move Adjust Exit
Input
Search
Tools
Setup - Time
Clock
You can set the television clock so that the current time
TV
Clock 1 2 : 0 0
On Timer Off Timer
is displayed when pressing the INFO button on the remote control. You must also set the time if you wish to use
Move Enter Return
the automatic on or off timers.
On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
You must set the clock first.
Auto Power Off
When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer “On” mode and prevents overheating, which may occur if a TV is on for too long.
a m
- - : - - a m
- - : - - a m
Time
Off Off
Sleep Timer
You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.
You can select these options simply by pressing the TOOLS button on the remote control to enter Sleep Timer. If the sleep timer is not yet set, Off is displayed. If it is already set, the remaining time before which the television switches to standby mode is displayed.
Setup - Child Lock
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable
TV
Child Lock : On
Programme : P 1 Lock : ?
programmes by muting out video and audio. Child Lock cannot be released using front (or side) panel buttons. Only remote
Move Enter Return
control can release the Child Lock setting, so keep the remote control away from children.
Child Lock : On/Off
If you want to unlock a channel, set to Off.
Programme : Channel number to be locked.  Lock : When press the ENTER button, the Locked is
displayed.
If any channel is locked, you can not access to the
Channel and Child Lock menu by using the control buttons on the TV panel (the Not available is displayed in the Child Lock menu). You can accessby using the remote control only.
Child Lock
Setup - Language / Blue Screen
(depending on the model)
Language
It is variable depending on the model. When you start using the television for the first time, you must select the language which will be used for displaying menus and indications.
Blue Screen
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen to Off.
TV
Plug & Play Language : English Time Child Lock Blue Screen : Off
Move Enter Exit
Setup
► ► ► ► ►
Picture - Mode
Mode : Dynamic / Standard
/ Movie / Custom
You can select the type of picture which best corresponds to your viewing requirements.
You can select these
options by pressing
TV
Mode : Dynamic
Contrast : 100 Brightness : 50 Sharpness : 75 Colour : 50
Tint : G 50 R 50
Colour Tone : Cool1 Reset
Move Adjust Return
TOOLS button to enter Picture Mode.
Contrast / Brightness / Sharpness / Colour / Tint
(NTSC only)
The television has several settings which allow you to control the picture quality.
Colour Tone : Cool2 / Cool1 / Normal / Warm1 / Warm2
Reset
You can return to the factory defaults. The reset function is set for each mode (Dynamic, Standard, Movie, or Custom).
Mode
Picture - Digital NR / DNIe Jr
(depending on the model)
Digital NR
If the signal received by the
► ►
television is weak, you can activate this feature to reduce any static and ghosting that
TV
Mode : Dynamic Digital NR : Off DNIe Jr : Off
may appear on the screen.
DNIe Jr
Move Enter Exit
This feature bring you more detailed image with detail enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you.
DNIe Jr technology will fit every signals into your eyes.
Picture
► ► ►
Sound - (depending on the model) Mode / Adjust / Auto Volume / Turbo Sound
Mode : Standard / Music /
Movie / Speech / Custom
You can select the type of special sound effect to be
TV
Mode : Standard Adjust Auto Volume : Off Turbo Sound : Off
used when watching a given broadcast.
You can select these
options by pressing
Move Enter Exit
TOOLS button to enter Sound Mode.
Adjust : Bass / Treble / Balance
The television has several settings which allow you to control the sound quality.
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
Sound
► ► ► ►
Auto Volume
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Turbo Sound
This feature suitably emphasizes both higher and lower bands of sound (and includes other effects). You can enjoy more magnificent and dynamic sound when watching music, movie, or other channels.
You can select the options by pressing TOOLS button
to enter Turbo Sound.
English - 6
English - 7
Teletext Feature (depending on the model)
Troubleshooting
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
For teletext information to be displayed correctly, channel
reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
1 (index)
Used to display the index (contents) page at any time while you are viewing teletext.
2 Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting
company, the different topics covered on a teletext page
are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To
display the previous or next page, press the corresponding
coloured button.
3 (reveal)
Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again.
4 (teletext on/mix)
Press to activate teletext mode after selecting the channel providing the teletext service. Press it again to overlap the teletext with the current broadcasting screen.
5 (hold)
Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically. To resume, press it again.
6 (store)
Used to store the teletext pages.
7 (page up)
Used to display the next teletext page.
8 (page down)
Used to display the previous teletext page.
9 (cancel)
Used to display the broadcast when searching for a page.
0 (sub-page)
Used to display the available sub-page.
! (mode)
Press to select the teletext mode (LIST/FLOF). If you press it in the LIST mode, it switches into the List
save mode. In the List save mode, you can save teletext
page into list using the (store) button.
@ (size)
Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again.
Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.
No sound or picture
Check that the mains lead has been connected to a wall
socket.
Check that you have pressed the “ P ” button (On/Off)
and the POWER button on remote control.
Check the picture contrast and brightness settings. Check the volume.
Normal picture but no sound
Check the volume. Check whether the volume MUTE button on the remote
control has been pressed.
No picture or black and white picture
Adjust the colour settings. Check that the broadcast system selected is correct.
Sound and picture interference
Try to identify the electrical appliance that is affecting the
television, then move it further away.
Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
Check the direction, location and connections of your
aerial. This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries. Clean the upper edge of the remote control (transmission
window).
Check that the “+” and “–” ends of the batteries are
inserted correctly.
Check that the batteries are drained.
A still image may cause color distortion, but with normal sound(white or highlight image).
Switch to other channels with moving image, and check if
the color turns normal after 5 minutes.
Turn off the TV, and turn it on after 30 minutes to check
the color.
continued...
OSD Map
Input – Source List – TV / AV1 / AV2 / Component – FM Radio
Picture – Mode – Mode – Dynamic / Standard / Movie / Custom Contrast Brightness Sharpness Colour Tint (NTSC only) Colour Tone – Cool2 / Cool1 / Normal / Warm1 / Warm2 Reset – Digital NR – Off / On – DNIe Jr – Off / On
Sound – Mode – Standard / Music / Movie / Speech / Custom – Adjust – Bass / Treble / Balance – Auto Volume – Off / On – Turbo Sound – Off / On
Channel – Auto Store – Manual Store – Programme – Colour System – AUTO / PAL / SECAM / NTSC4.43 / NTSC3.58 – Sound System – BG / DK / I / M – Search – Store – Add/Delete – Fine Tune – Sort – LNA – Off / On
Setup – Plug & Play – Language – Time – Clock – On Timer – Off Timer – Child Lock – Child Lock – Programme – Lock – Blue Screen – Off / On
: It is variable depending on the model.
Important Warranty Information Regarding Television Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on non-
expanded standard format television video and programming,
should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as
stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary
images that exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty.
English - 8
Loading...