Samsung CL32A20HE, CL28A20HE User Manual
CL28A20HE
CL32A20HE
COLOR TELEVISION
Owner’s
Instructions
Important Warranty Information
Regarding Television Format
Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them
should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide
screen pictures), should be limited to no more than 15% of the total television viewing per
week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary images that exceed the above guide-
lines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost
images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that offer
picture sizing features, use these controls to view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not covered
by your Samsung limited warranty.
2
CONTENTS
Chapter 1: Your New TV . . . . . . . . . . . . . . . . 5
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Familiarizing Yourself with The TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 2: Installation . . . . . . . . . . . . . . . . . 11
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . 11
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . 11
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 12
Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . . 12
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting to a Cable Box that Descrambles All Channels . . 13
Connecting to a Cable Box that Descrambles Some Channels13
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting an S-VHS VCR. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting a Second VCR to Record from the TV. . . . . . . . . 17
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting a Digital TV Set-Top Box (480p/1080i). . . . . . . . . . . . . . . 18
Connecting a Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installing Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . . 20
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 21
Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Viewing the Menus and On-Screen Displays. . . . . . . . . . . . . . . . . . . . 23
Viewing the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Selecting a Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 25
Storing Channels in Memory (Automatic Method) . . . . . . . . 26
Adding and Erasing Channels (Manual Method). . . . . . . . . . 27
Changing Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the PRE-CH Button to select the Previous Channel. . . 28
Labeling the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using the Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3
CONTENTS
Chapter 3: Operation (Cont.) . . . . . . . . . . . . 34
Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using Automatic Sound Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Setting the Signal Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Assigning Names to External input mode . . . . . . . . . . . . . . . 37
Chapter 4: Special Features. . . . . . . . . . . . . 38
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
LNA (Low Noise Amplifier). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Changing the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
TM
DNIe
Using the R.Surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . . . 52
Adjusting the Volume Automatically. . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting the Surround. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting the BBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting the On/Off Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting the Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting the Preferred Volume Level and Channel. . . . . . . . . . . . . . . . . 58
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Setting The On/Off Melody. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Viewing the Demonstration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Using WISE LINK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Switching to WISE LINK Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Selecting Image (JPEG) Files/Music (MP3) Files . . . . . . . . . . . . . . . . . 65
Picture (JPEG) Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Rotating the Picture (JPEG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Picture Zoom (JPEG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Music File (MP3) Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Playback All JPEG/MP3 Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
WISE LINK Menu Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
(Digital Natural Image engine) . . . . . . . . . . . . . . . . . . 44
Chapter 5: Troubleshooting . . . . . . . . . . . . . 75
Identifying Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Using Your TV in Another Country. . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4
Chapter One
YOUR NEW TV
YOUR NEW TV
List of Features
Your TV was designed with the latest technology. This TV is a high-performance unit that
includes the following special features:
• Full Flat Screen
• Automatic timer to turn the TV on and off
• Adjustable picture and sound settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• Picture in Picture
TM
• DNIe
• WISE LINK is used to play JPEG files (*.jpg) and MP3 files (*.MP3) stored in the memory
(Digital Natural Image engine)
Samsung’s New Technology enables an improved image with detail, contrast and white
enhancement and 3D noise reduction.
card on the TV.
Once you have unpacked your TV, check to make sure that you have all the parts shown
here. If any piece is missing or broken, call your dealer.
Remote Control/
AAA Batteries
Owner’s Instructions
Safety Guide Manual
/
Warranty Card; 2EA/
Registration Card
Memory Card Slot
Cover
5
YOUR NEW TV
Familiarizing Yourself with The TV
Front Panel Buttons
The buttons on the front panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.
Œ
Memory Card Slot
Insert the memory card into the slot.
´
TV/VIDEO
Press to change bet ween viewing TV programs
and signals from other components.
ˇ
MENU
Press to see an on-screen menu of your TV's features.
¨
VOL – and +
Press to increase or decrease the volume.
Used to adjust the selected item.
(TV mode)
EXIT /ENTER
(Wise Link mode)
Used to move to the previous menu.
Used to execute the selected item.
ˆ
CH and CH
Press to change channels.
MOVE
Used to move between items.
You can also use these buttons in the WISE LINK
mode.
Ø
POWER
Press to turn the TV on and off.
∏
Remote Control Sensor
Aim the remote control towards this spot on the
TV.
”
TIMER indicator
When the TV is turned on, the TIMER indicator
blinks five times. This indicator illuminates when
the TIMER mode is set to the “On” position after
setting the clock and either the On timer or Off
timer, with the remote control.Even if the power is
turned off, this indicator stays lit. (Clock must be
set before using this function.)
Note: You can use the Volume button on the remote control to control the volume while
6
in WISE LINK mode. (You cannot control the volume on the front control panel of TV.)
YOUR NEW TV
Side Panel Jacks
You can use the side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment,
see page 19.)
Œ
AUDIO INPUT jacks
Used to connect the audio signals from a camcorder
or video game.
´
VIDEO INPUT jack
Used to connect a video signal from a camcorder or
video game.
ˇ
SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD
player.
Note: In S-Video mode,Audio Output depends what
kind of audio input source is connected to the side
audio input jacks (AV1).
7
YOUR NEW TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are three sets of input jacks, you can connect three different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 11 – 18.
Œ
AUDIO-VIDEO MONITOR
OUTPUT jacks
These audio-video signals are identical to A/V
signals being displayed on the big screen. (Typically
used as the input signals for a recording VCR.)
´,Ø
VIDEO/AUDIO INPUT jacks
Video and Audio signals from VCRs, DVD players
and similar devices.
Note: The common jack of component 1 and AV2,
component 2 and AV3 input jacks are exclusive relation with each other.
ˇ
SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD
player.
Note: In S-Video mode,Audio Output depends what
kind of audio input source is connected to the side
audio input jacks (AV1).
¨
VHF/UHF
Connect to an antenna or to a cable TV system.
ˆ
COMPONENT 1, 2 INPUT
jacks
(480i/480p/1080i)
Connect to the audio and component output jacks of
a DVD player or Set-Top Box .
Note: Only black and white signals are output from
a monitor in DVD/DTVmode.
8
YOUR NEW TV
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote,
always point it directly at the TV.
You can also use your remote control to operate your Set-Top Box, VCR, DVD and cable
box. See page 73 for details.
Œ
POWER
Turns the TV on and off.
´
S.MODE
Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal, customized
sound settings).
ˇ
P.MODE
Adjust the TV picture by selecting
one of the preset factory settings
(or select your personal, customized
picture settings).
¨
Number buttons
Press to select channels directly on
the TV.
+100
Press to select channels over 100.
For example, to select
channel 121, press “+100,” then
press “2” and “1.”
ˆ
VOL -, VOL +
Press to increase or decrease the
volume.
Ø
MUTE
Press to temporarily cut off
the sound.
∏
SLEEP
Press to select a preset time interval for automatic shutoff.
”
MENU
Displays the main on-screen menu.
’
R.SURF
Press the R.SURF button to automatically return to a preferred
channel after a user-preset time
delay.
ROTATE
Press to rotate a JPEG image by 90
degrees.
Ô
MODE
Selects a target device to be controlled by the Samsung remote control (i.e., TV, Set Top Box, VCR, Cable
box, or DVD).
PRE-CH
Tunes to the previous channel.
Ò
TV/VIDEO
Press to display all of the available
video sources (i.e., Antenna/Cable,
VCR).
Ú
CH and CH
(Channel Up/Down)
Press CH or CH to change
channels.
Æ
INFO
Press to see the time, channel, etc.,
on- screen.
ı
EXIT
Press to exi t the menu.
˜
Up,Down,Left,
Right (▲,▼,œ,√)/
ENTER
Press to select highlight up, down,
left, or right. While using the onscreen menus, press ENTER to activate (or change) a particular item.
¯
MTS (Multichannel
Television Stereo)
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
P.ZOOM
Press to expand a JPEG image.
˘
TV/COMP.
Press to switch the TV, COMPONENT1 or 2 mode.
˝
W.LINK
Press to switch to or initialize the
WISE LINK mode.
9
YOUR NEW TV
Remote Control
¿
P.SIZE
Press to change the screen size.
¸
DNIe
Activates DNIe (Digital Natural
Image engine).
˛
VCR(DVD, DVR
STB or Wise Link)
Controls
REW (Rewind)
Press to rewind a tape in your
VCR(DVD, DVR or STB).
STOP
Press this button to stop a tape
during play, record, rewind or
fast forward. If the button is
pressed during Full-Automatic
play, the function will be cancelled.
PLAY/PAUSE
Press the PLAY/PAUSE but ton to
play back prerecorded tapes or
pause the tape.
FF
Press to fast forward the tape in
your VCR(DVD, DVR or STB).
◊
SET
Use this button when you are setting up your remote control to operate your Set Top Box,VCR,Cable
box or DVD.
±
STILL (Main picture)
Press to stop the action during a
particular scene. Press again to
resume normal video.
Note: The still function doesn’t oper-
ate in Component 1 or 2 mode.
≠
PIP Controls
PIP
Press this button to control the PIP
window.
SIZE
Press to make the PIP window
small, large, double window or stock
ticker window.
SWAP
Exchanges the video signal that is
currently displayed on the main
screen with the signal in the PIP
window.
CH
Displays the available channels in
sequence (These buttons change
channels in the PIP window only).
–
RESET
If your remote control is not functioning properly, take out the batteries and press the reset button for
about 2~3 seconds. Re-insert the
batteries and try using the remote
control again.
10
Chapter Two
INSTALLATION
INSTALLATION
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads” on next page.
If you have two antennas, see “Separate
VHF and UHF Antennas” on next page.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from the
twin leads under the
screws on the 300-75 ohm
adaptor (not supplied). Use
a screwdriver to tighten
the screws.
2
Plug the adaptor into the
VHF/UHF terminal on the
bottom of the back panel.
11
INSTALLATION
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into
the VHF/UHF terminal on
the bot tom of the back
panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into the
VHF/UHF terminal on the
bottom of the rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
▼
1
Plug the incoming cable
into the VHF/UHF antenna
terminal on back of the TV.
Because this TV is cable-ready,
you do not need a cable box to view
unscrambled cable channels.
12
INSTALLATION
Connecting to a Cable Box that Descrambles All Channels
▼
1
Find the cable that is connected to the ANTENNA
OUT terminal on your cable
box.
This terminal might be labeled
“ANT OUT”, “VHF OUT” or simply,
“OUT”.
2
Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable t hat is connected to
the ANTENNA IN
terminal on your cable box .
2
Connect this cable to a
two-way split ter.
3
Connect a coaxial cable
between an OUTPUT terminal on the splitter and the
IN terminal on the cable
box.
Incoming Cable
Incoming Cable
Split ter
▼
This terminal might be labeled
“ANT IN”, “VHF IN” or simply,
“IN”.
Split ter
Cable Box
13
INSTALLATION
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the RF(A/B) switch.
5
Connect another cable
between the other OUT terminal on the splitter and
the A–IN terminal on the
RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of the
TV.
Incoming
Cable
Incoming
Cable
Incoming
Cable
Split ter
Split ter
Split ter
Cable Box
Cable Box
Cable Box
RF (A/B)
Switch
RF (A/B)
Switch
RF (A/B)
Switch
TV R ear
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the
A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)
14
INSTALLATION
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 11-14). Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the VCR
and the antenna
terminal on the TV.
Incoming
Cable or
Antenna
VCR R ear Panel
VCR R ear Panel
TV Rear Panel
Coaxial Cable
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO jacks
on the TV.
VCR R ear Panel
Audio Cable
TV Rear Panel
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
VCR R ear Panel
Video Cable
TV Rear Panel
Follow the instructions in “Viewing an External Signal Source” to view your VCR tape.
15
INSTALLATION
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This
connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the 1AUDIO
INPUT jacks on the TV.
VCR R ear Panel
VCR R ear Panel
TV Rear Panel
Coaxial Cable
TV Rear Panel
Audio Cable
Make sure the jacks you are using are underneath the number “1.”
3
Connect an S-video
cable between the
S-VIDEO OUT jack on the
VCR and the
S-VIDEO INPUT
jack on the TV.
VCR R ear Panel
S-Video Cable
TV Rear Panel
16
An S-video cable is usually included with an S-VHS VCR (If not, check your local
electronics store.)
INSTALLATION
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a set of audio
cables between the
AUDIO OUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
TV Rear Panel
VCR Input Panel
Audio Cable
(The VCR input jacks might be either on the front or on back of the VCR.)
2
Connect a video cable
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the
VCR.
TV Rear Panel
VCR Input Panel
Video Cable
Refer to your VCR’s instructions for more information about how to record using this kind
of connection.
Connecting a DVD Player (480i)
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio
cables between the COMPONENT INPUT1(L, R) or
COMPONENT INPUT 2 (L,
R) jacks on the TV and
the AUDIO OU T jacks on
the DVD player.
2
Connect a video cable
between the COMPONENT INPUT 1 (Y, PB,PR)
or COMPONENT INPUT 2
(Y, PB,PR) jacks on the
TV and the COMPONENT
VIDEO OUT (Y, PB,PR)
jacks on the DVD player.
DVD Player R ear Panel TV Rear Panel
Audio Cable
DVD Player Rear Panel
Video Cable
TV Rear Panel
Note: For an explanation of Component video, see your DVD player's owner's manual.
17
INSTALLATION
Connecting a Digital TV Set-Top Box (480p/1080i)
Connecting to Y,PB,P
R
Connect the Y, PB, and PRvideo outputs of the set-top box to their corresponding inputs
on the TV. Next, connect the Left and Right audio from the set-top box to the corresponding L and R terminals on the TV. (The connections for a typical set-top box are
shown below.)
1
Connect a coaxial cable
between the ANTENNA
OUT terminal on the Set
Top Box and the antenna
terminal on the TV.
2
Connect a set of audio
cables between the COMPONENT INPUT 2 (L, R) or
COMPONENT INPUT 1 (L, R)
jacks on the TV and the
AUDIO OUT jacks on the
Set Top Box.
Set Top Box Rear Panel
Set Top Box Rear Panel
Set Top Box Rear Panel
Coaxial Cable
Audio Cable
TV Rear Panel
TV Rear Panel
TV Rear Panel
18
3
Connect a video cable
between the COMPONENT
INPUT 2 (Y, PB,PR) or
COMPONENT INPUT 1 (Y,
PB,PR) jacks on the TV and
the VIDEO OUT (Y, PB,PR)
jacks on the Set Top Box.
Set Top Box Rear Panel
TV Rear Panel
Video Cable
Note: For detailed information, refer to the Set Top Box instruction manual.
INSTALLATION
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal
Source” on page 36).
1
Locate the A/V output
jacks on the camcorder.
They are usually found on
the side or back of the
camcorder.
Camcorder
Outpu t Jacks
2
Connect an audio cable
between the AUDIO
OUTPUT jack on the
camcorder and the
AUDIO terminals on the
side of the TV.
3
Connect a video cable
between the VIDEO OUTPUT jack on the camcorder and the VIDEO terminal on the side of the
TV.
Camcorder
Outpu t Jacks
Camcorder
Outpu t Jacks
Audio Cable
Y-Connector
Video Cable
TV Side Panel
TV Side Panel
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
19
INSTALLATION
Installing Batteries in the Remote Control
1
Slide the cover out completely.
▼
2
Install two AAA size
batteries.
Make sure to match the “+” and
“
–” ends of the batteries with the
diagram inside the compartment.
3
Replace the cover.
▼
Remove the batteries and store
them in a cool, dry place if you won’t
be using the remote control for a
long time.
The remote control can be used up
to about 23 feet from the TV.
(Assuming typical TV usage, the
batteries last for about one year.)
20
OPERATION
Chapter Three
OPERATION
OPERATION
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, five basic customer settings proceed automatically
and subsequently: Setting the language, Video signal source, Ant. input check, Auto
program and Clock.
1
Press the POWER button on
the remote control.
The message “Plug & Play”
is displayed.
It flickers for a little while
and then the “Language”
menu is automatically displayed.
2
Press the œœor √√button to select
the desired language.
Press the MENU button to enter
the language, then the “Channel”
menu is automatically displayed.
3
Press the œœor √√button to select
the desired video signal source.
Press the MENU button to enter
the video signal source, then the
“Check antenna input.” is automatically displayed.
Plug & Play
Setup
Plug & Play
Time
LanguageœœEnglish
Caption
Melody : On
Demonstration
Adjust Skip
Channel
Auto program
Add/Delete
Fine tune : 00
Air/CATV
Name : - - - LNA : On
Adjust Skip
œœ
Air
√√
√√
√√
√√
√√
√√
√√
√√
Check antenna input.
Auto program Skip
21
OPERATION
4
Make sure that the antenna
is connected to the TV.
And then press the œœor
√√
button to activate "Auto
Program" or press the MENU
button to skip. (refer to “Auto
program” on page 27.)
5
Press the √√button to move to
the hour or minute.
Set the hour or minute by pressing the ▲ or ▼ button. (refer to
“Setting the Clock” on page 31.)
6
When you have finished,
press the MENU button.
The message “Enjoy your
watching..” is displayed.
Auto program
Air 3
Exit
Time
Clock - - : - - am
On Timer - - : - - am Off
Off Timer - - : - - am Off
Sleep Timer : Off
On Timer Volume : 10
On Timer Channel : 3
Move Adjust Skip
Enjoy your watching..
22
7
If you want to reset this feature
(1)Press the MENU button.
(2)Press the ▲ or ▼ button to
select the “Setup”, then press
the ENTER button.
(3)Press the ENTER button to
select “Plug & Play”.
The message “Plug & Play” is
Move Enter Return
Setup
Plug & Play
Time
Language: English
Caption
Melody : On
Demonstration
√√
√√
√√
√√
displayed.
Note: Plug & Play feature doesn’t work in the A/V mode.
OPERATION
Viewing the Menus and On-Screen Displays
Viewing the Menus
1
With the power on, press the
MENU but ton.
The main menu appears on the
screen. Its left side has five icons:
Input , Picture, Sound, Channel and
Setup.
Move Enter Exit
Input
Source List : TV
Edit Name
2
Use the ▲ and ▼ buttons to highlight one of the 5 icons.
Then press the ENTER button to access the icon’s sub-menu.
3
Press the EXIT button to exit the menu.
Viewing the Display
1
Press the INFO button.
The on-screen display
shows any or all of the following : Active channel, the
channel label, signal, MTS
and the current time.
Air 10
12 : 00 am
MTS : Stereo
Signal : Mono
▼
The on-screen menus disappear
from the screen after two minutes.
√√
√√
▼
You can also use the MENU, CH
and VOL buttons on the control
panel of the TV to make selections.
▼
The on-screen displays
disappear after ten seconds.
23
OPERATION
Selecting a Menu Language
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to
select “Setup”, then press the
ENTER button.
2
Press the ▲ or ▼ button to
select “Language”.
3
Press the
select the appropriate language:
“English”,“Español”or “Français”.
Press the EXIT button to exit the
menu.
œœ or√√
button to
Setup
Plug & Play
Time
Language: English
Caption
Melody : On
Demonstration
Move Enter Return
Setup
Plug & Play
Time
LanguageœœEnglish
Caption
Melody : On
Demonstration
Move Adjust Return
Configuración
Plug & Play
Tiempo
œœ
Idioma
Subtítulo
Melodía : Enc.
Demostración
Español
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
24
Mover Ajustar Regresar
Loading...