Samsung CI20F32Z User Manual
COLOUR
TELEVISION
Owners Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
TELETEXT FUNCTION
(depending on the model)
ENG
Safety Instructions
The following illustrations represent the precautions to be taken when using and moving your
television.
Do NOT expose the television to
extreme temperature conditions
(below 5°C and above 35°C) or to
extreme humidity conditions (less
than 10% and more than 75%).
If the television is broken, do not
try to repair it yourself. Contact
qualified service personnel.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Caution
Do NOT expose the television to
direct sunlight.
During a storm conditions
(especially when there is lightning)
unplug the television from the
mains socket and aerial.
Do NOT expose the television to
any liquids.
If the remote control is not used for
a long period of time, remove the
batteries and store it in a cool, dry
place.
The lightning flash and arrow head
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The main voltage is indicated on the
**
rear of the TV set and the frequency is
50 or 60Hz.
2
within the triangle is a warning
sign alerting you of dangerous
voltage inside the product.
The exclamation point within the
triangle is a warning sign
alerting you of important
instructions accompanying the
product.
WARNING: TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Contents
uu
PREPARING YOUR TELEVISION
n
Safety Instructions ......................................................................................... 2
n
Caution .......................................................................................................... 2
n
Front Panel Controls...................................................................................... 4
n
Using the Buttons on the Front Panel............................................................ 4
n
Connection Panels ........................................................................................ 5
n
Infrared Remote Control (All Functions Except Teletext) .............................. 6
n
Infrared Remote Control (Teletext Functions) ............................................... 7
n
Inserting the Batteries in the Remote Control................................................ 8
n
Connecting the Aerial (or Cable Television Network).................................... 8
n
Switching Your Television On and Off........................................................... 9
n
Placing Your Television in Standby mode ..................................................... 9
n
Plug & Play Feature....................................................................................... 10
n
Choosing Your Language.............................................................................. 11
u
SETTING UP THE CHANNELS
n
Storing the Channels Automatically............................................................... 12
n
Selecting a Channel Numbered Ten or Over ................................................ 12
n
Storing the Channels Manually...................................................................... 13
n
Skipping Unwanted Channels ....................................................................... 14
n
Fine tuning Channel Reception ..................................................................... 15
n
Sorting the Stored Channels ......................................................................... 16
u
USING THE TELEVISION
n
Changing the Picture Standard ..................................................................... 17
n
Selecting the Picture Format ......................................................................... 17
n
Adjusting the Picture Settings ....................................................................... 18
n
Changing the Sound Standard ...................................................................... 19
n
Adjusting the Sound Settings ........................................................................ 20
n
Adjusting the Volume..................................................................................... 20
n
Extra Sound Settings
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) .................................... 21
n
Selecting the Sound Mode ............................................................................ 22
n
Switching the Sound Off Temporarily ............................................................ 22
n
Setting the Sleep Timer ................................................................................. 23
n
Setting and Displaying the Current Time (depending on the model)............. 23
n
Switching the Television On and Off Automatically (depending on the model)
n
Activating the Child Lock ............................................................................... 25
n
Setting the Blue Screen Mode
u
USING THE TELETEXT FUNCTION (depending on the model)
n
Teletext Decoder
n
Displaying Teletext Information ..................................................................... 27
n
Selecting a Specific Teletext Page ................................................................ 28
n
Using FLOF to Select a Teletext Page
n
Storing Teletext Pages .................................................................................. 29
u
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
n
Viewing Picture From External Sources ........................................................ 29
n
Connecting to the Audio/Video Input/Outputs ............................................... 30
n
Automatic Degaussing to Remove Color Patches......................................... 31
n
Troubleshooting: Before Contacting Service Personnel................................ 31
........................................................................................... 27
....................................................................... 26
..........................................................
ENG
... 24
28
Symbols
*
Press Important Note
â
3
Front Panel Controls (depending on the model)
Buttons and markings are subject to change.
â
MENU DISPLAY
MENU DISPLAY
VOLUME ADJUSTMENT
VOLUME ADJUSTMENT
CHANNEL SELECTION
REMOTE CONTROL SENSOR
CHANNEL SELECTION
STAND-BY INDICATOR
STAND-BY
INDICATOR
REMOTE CONTROL SENSOR
POWER
POWER
Using the Buttons on the Front Panel
If your remote control no longer works or you have lost it, you
can use the controls on the front panel of the television to:
u
Switch on the television when it is in Standby mode
and select channels
Access the main menu
u
u
Adjust the volume
Buttons on the front panel have the same function as
corresponding buttons on the remote control.
4
()
(
)
()
Connection Panels
The actual configuration on your TV may be different, depending on
â
your model.
Front (or Side) of TV
RCA AUDIO/VIDEO INPUT
CONNECTORS
Connecting earphones ( ) /headphones ( )
â
u You can connect a set of earphones/headphones to your television if you wish to watch a
television programme without disturbing the other people in the room.
u Prolonged use of earphones/headphones at a high volume may damage your hearing.
ENG
Rear of TV
C
BA
A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR
B) 75WCOAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
C) RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
C B
C
BC
5
Infrared Remote Control (All Functions Except Teletext)
POWER
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT CHANNEL
SOUND MENU DISPLAY
TURBO SOUND ON/OFF
SELECTION
(OPTION)
(OPTION)
Buttons and markings are subject to change.
â
TUNER/CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
SOUND MODE SELECTION
(OPTION)
AUTOMATIC SWITCH-OFF
SOUND STANDARD (OPTION)
PICTURE STANDARD (OPTION)
TEMPORARY SOUND SWITCH-
VOLUME DECREASE
PREVIOUS CHANNEL
OFF
PICTURE SIZE
NEXT CHANNEL
VOLUME INCREASE
MENU DISPLAY
Operation of remote control may be affected by bright artificial light near to the TV set.
ââ
6
Infrared Remote Control (Teletext Functions)
Buttons and markings are subject to change.
â
ENG
TELETEXT DISPLAY/MIX
LIST/FLOF MODE SELECTION
TELETEXT REVEAL
TELETEXT HOLD
FASTEXT TOPIC SELECTION
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT STORE
TELETEXT SUB-PAGE
PICTURE SIZE
PROGRAMME SELECTION
BY NAME
7
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control
when you :
u
Purchase the television.
u
Find that the remote control is no longer operating
correctly.
1 Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
u + on the battery with + on the remote control
u-on the battery with -on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
Rear of TV
8
Connecting the Aerial (or Cable Television Network)
To view television channels correctly, a signal must be
received by the set from one of the following sources:
u
An outdoor aerial
u
A cable television network
Plug the aerial or cable network input cable to the 75W coaxial socket
on the rear of the television.
Cable
Television
Network
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
If you have purchased this television in the United
*
Kingdom, refer to rear cover for further instructions on
plug wiring.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the TV set and
â
the frequency is 50 or 60Hz.
2 Press the (ON/OFF) button on the front of the television.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER button on the remote control to switch the
television on.
: The programme that you were watching last is re-
Result
4 To switch your television off, press the (ON/OFF) button
again on the front of the television.
selected automatically.
ENG
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to
reduce:
u
Power consumption
u
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when
you turn it on.
1 Press the POWER button on the remote control.
Result:
2 To switch the screen back on, simply press the POWER button
again on the remote control.
Do not leave your television in standby mode for long
â
periods of time (when you are away on holiday, for
example). In this case, you should switch it off completely.
The screen is turned off and the Standby indicator on
the front of the television lights up.
9
Plug & Play Feature
When the television is initially powered ON, three basic
customer settings proceed automatically and subsequently:
setting the language, channel and clock.
1 If the television is in Standby mode (red light visible on the
television front panel), press the POWER button on the remote
control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the Language menu is automatically
displayed.
Plug & Play
Ant. Input Check
P 1
471 MHz 48 %
Time
Clock 11 : 35
ENJOY YOUR WATCHING
2 Press the s or t button to select required language. Press the
MENU button to enter the language, and then the message Ant.
Input Check is displayed.
If any language is not selected on the Language menu, the
â
Language menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press
the + or button to store the channels (refer to Storing the
Channels Automatically on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the Time menu is
displayed.
5 Press the + or button to move to the hour or minute. Set the hour
or minute by pressing the s or t button (refer to Setting and
Displaying the Current Time on page 23).
6 When you have finished, press the MENU button.
Result: The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be
activated.
7 If you want to reset this feature...
Language : English
Plug & Play
Blue Screen : Off
Child Lock
10
Function
E
E
1 Press the MENU button.
2 Press the s or t button to select the Function, and then
press the + or button.
3 Select the Plug & Play by pressing the s or t button, and
then press the + or button.
Result:
The message Plug & Play is displayed.
Loading...