Samsung CI-15K22T, CF15K22Z User Manual

COLOUR TELEVISION

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

REMOTE CONTROL

ON-SCREEN MENUS

TELETEXT FUNCTION

(depending on the model)

ENG

Safety Instructions

The following illustrations represent the precautions to be taken when using and moving your television.

10%

5°

Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%).

If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

75%

35°

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

Do NOT expose the television to direct sunlight.

During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.

Do NOT expose the television to any liquids.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

Displaying any stationary images that exceed the long time, it can cause uneven aging of

☛

picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.

Caution

The lightning flash and arrow head

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO PREVENT ELECTRICAL SHOCK, DO

NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The main voltage is indicated on the rear of

☛

the TV set and the frequency is 50 or 60Hz.

within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.

The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

WARNING: TO PREVENT DAMAGE WHICH MAY

RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

◆ PREPARING YOUR TELEVISION

■

Safety Instructions ......................................................................................... 2

■

Caution .......................................................................................................... 2

■

Front Panel Controls...................................................................................... 4

■

Using the Buttons on the Front Panel............................................................ 4

■

Connection Panels ........................................................................................ 5

■

Infrared Remote Control (All Functions Except Teletext) .............................. 6

■

Infrared Remote Control (Teletext Functions) ............................................... 7

■

Inserting the Batteries in the Remote Control................................................ 8

■

Connecting the Aerial (or Cable Television Network).................................... 8

■

Switching Your Television On and Off........................................................... 9

■

Placing Your Television in Standby mode..................................................... 9

■

Plug & Play Feature....................................................................................... 10

■

Choosing Your Language.............................................................................. 11

◆ SETTING UP THE CHANNELS

■

Storing the Channels Automatically............................................................... 12

■

Selecting a Channel Numbered Ten or Over ................................................ 12

■

Storing the Channels Manually...................................................................... 13

■

Skipping Unwanted Channels ....................................................................... 14

■

Fine tuning Channel Reception ..................................................................... 15

■

Sorting the Stored Channels ......................................................................... 16

◆ USING THE TELEVISION

■

Changing the Picture Standard ..................................................................... 17

■

Selecting the Picture Format ......................................................................... 17

■

Adjusting the Picture Settings ....................................................................... 18

■

Changing the Sound Standard ...................................................................... 19

■

Adjusting the Sound Settings ........................................................................ 20

■

Adjusting the Volume..................................................................................... 20

■

Extra Sound Settings

(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) .................................... 21

■

Selecting the Sound Mode ............................................................................ 22

■

Switching the Sound Off Temporarily ............................................................ 22

■

Setting the Sleep Timer ................................................................................. 23

■

Setting and Displaying the Current Time (depending on the model)............. 23

■

Switching the Television On and Off Automatically (depending on the model)

■

Activating the Child Lock ............................................................................... 25

■

Setting the Blue Screen Mode....................................................................... 26

◆ USING THE TELETEXT FUNCTION (depending on the model)

■

Teletext Decoder ........................................................................................... 27

■

Displaying Teletext Information ..................................................................... 27

■

Selecting a Specific Teletext Page................................................................ 28

■

Using FLOF to Select a Teletext Page.......................................................... 28

■

Storing Teletext Pages .................................................................................. 29

◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE

■

Viewing Picture From External Sources ........................................................ 29

■

Connecting to the Audio/Video Input/Outputs ............................................... 30

■

Automatic Degaussing to Remove Color Patches......................................... 31

■

Troubleshooting: Before Contacting Service Personnel................................ 31

ENG

... 24

Symbols

☛

Press Important Note

➢

ENG

Front Panel Controls (depending on the model)

Buttons and markings are subject to change.

➣

MENU DISPLAY

VOLUME ADJUSTMENT

CHANNEL SELECTION

REMOTE CONTROL SENSOR

CHANNEL SELECTION

STAND-BY INDICATOR

POWER

STAND-BY

INDICATOR

REMOTE CONTROL SENSOR

Using the Buttons on the Front Panel

If your remote control no longer works or you have lost it, you can use the controls on the front panel of the television to:

◆ Switch on the television when it is in Standby mode and select channels

◆ Access the main menu ()

◆ Adjust the volume ()

Buttons on the front panel have the same function as corresponding buttons on the remote control.

()

Connection Panels

OUTPUT

INPUT

VIDEO AUDIO

OUTPUT

INPUT

VIDEO AUDIO

INPUT

MONITOR

-OUT

VIDEO AUDIO

INPUT

MONITOR

-OUT

VIDEO

(

MONO

)

L-AUDIO-R

The actual configuration on your TV may be different, depending on

➢

your model.

Front (or Side) of TV

RCA AUDIO/VIDEO INPUT

CONNECTORS

Connecting earphones ( ) /headphones ( )

➢

◆ You can connect a set of earphones/headphones to your television if you wish to watch a

television programme without disturbing the other people in the room.

◆ Prolonged use of earphones/headphones at a high volume may damage your hearing.

ENG

Rear of TV

A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR

B) 75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK

C) RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS

Infrared Remote Control (All Functions Except Teletext)

ENG

POWER

DIRECT CHANNEL SELECTION

ONE/TWO-DIGIT CHANNEL

SOUND MENU DISPLAY

TURBO SOUND ON/OFF

TEMPORARY SOUND SWITCH-

SELECTION

(OPTION)

OFF

Buttons and markings are subject to change.

TUNER/CABLE NETWORK SELECTION

EXTERNAL INPUT SELECTION

ON-SCREEN DISPLAY

SOUND MODE SELECTION (OPTION)

AUTOMATIC SWITCH-OFF

SOUND STANDARD (OPTION)

PICTURE STANDARD (OPTION)

PICTURE SIZE

NEXT CHANNEL

VOLUME DECREASE

PREVIOUS CHANNEL

Operation of remote control may be affected by bright artificial light near to the TV set.

➣

VOLUME INCREASE

MENU DISPLAY

Infrared Remote Control (Teletext Functions)

Buttons and markings are subject to change.

➣

ENG

TELETEXT DISPLAY/MIX

LIST/FLOF MODE SELECTION

TELETEXT HOLD

FASTEXT TOPIC SELECTION

TELETEXT NEXT PAGE

TELETEXT PREVIOUS PAGE

TELETEXT REVEAL

TELETEXT STORE

TELETEXT SUB-PAGE

PICTURE SIZE

PROGRAMME SELECTION BY NAME

ENG

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you :

PRESS

◆ Purchase the television.

◆ Find that the remote control is no longer operating

correctly.

1 Remove the cover of the remote control by pressing the symbol

PRESS

() and pulling the cover in the direction of the arrow.

2 Insert batteries, taking care to respect the polarities:

◆ + on the battery with + on the remote control

◆-on the battery with -on the remote control

3 Replace the cover by pushing it in the direction of the arrow.

PRESS

Connecting the Aerial (or Cable Television Network)

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.

75Ω

Rear of TV

Cable Television Network

Switching Your Television On and Off

The mains lead is attached to the rear of the television.

If you have purchased this television in the United Kingdom,

☛

refer to rear cover for further instructions on plug wiring.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the TV set and

➢

the frequency is 50 or 60Hz.

2 Press the “ ” (ON/OFF) button on the front of the television.

Result

: The Standby indicator lights up on the front panel.

3 Press the POWER button on the remote control to switch the

television on.

Result

: The programme that you were watching last is re-

selected automatically.

4 To switch your television off, press the “ ” (ON/OFF) button

again on the front of the television.

ENG

Placing Your Television in Standby mode

Your television can be placed in Standby mode, in order to reduce:

◆ Power consumption

◆ Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

The television is placed automatically in Standby mode when you turn it on.

1 Press the POWER button on the remote control.

Result:

2 To switch the screen back on, simply press the POWER button

again on the remote control.

Do not leave your television in standby mode for long

➣

periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.

The screen is turned off and the Standby indicator on the front of the television lights up.

ENG

Plug & Play Feature

Plug & Play

When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1 If the television is in Standby mode, press the POWER button

on the remote control.

Result: The message “Plug & Play” is displayed. It flickers for a

little while and then the “Language” menu is automatically displayed.

2 Press the ▲ or ▼ button to select required language. Press the

MENU button to enter the language, and then the message “Ant.

Input Check” is displayed.

If any language is not selected on the “Language” menu, the

➣

“Language” menu will be displayed about 30 seconds later.

Ant. Input Check

P 1 471 MHz 48 %

Time

Clock 11 : 35

ENJOY YOUR WATCHING

Function

Language : English

Plug & Play

Blue Screen : Off Child Lock



3 Make sure that the antenna is connected to the TV. And then press

the + or – button to store the channels (refer to “Storing the Channels Automatically” on page 12).

Result: The horizontal bar is displayed, and then channels are

stored in an order which reflects their positions in the frequency range.

4 When searching and storing is complete, the “Time” menu is

displayed.

5 Press the + or – button to move to the hour or minute. Set the hour

or minute by pressing the ▲ or ▼ button (refer to “Setting and Displaying the Current Time” on page 23).

6 When you have finished, press the MENU button.

Result: The message “ENJOY YOUR WATCHING” is displayed,

and then the channel which has been stored will be activated.

7 If you want to reset this feature...

1 Press the MENU button.

2 Press the ▲ or ▼ button to select the “Function”, and then

press the

3 Select the “Plug & Play” by pressing the ▲ or ▼ button, and

then press the + or – button.

Result:

+ or – button.

The message “Plug & Play” is displayed.

+ 22 hidden pages

Samsung CI-15K22T, CF15K22Z User Manual

Contents

Front Panel Controls (depending on the model)

Using the Buttons on the Front Panel

Connection Panels

Infrared Remote Control (All Functions Except Teletext)

Inserting the Batteries in the Remote Control

Connecting the Aerial (or Cable Television Network)

Switching Your Television On and Off

Placing Your Television in Standby mode

Plug & Play Feature