Samsung CHT-350 User Manual [he]

DVD-VCR

CHT-350

Instruction Manual

www.samsungvcr.com

PAL/NTSC

◆ Foreword

■ Safety Instructions......................................................................................... 5

■ Disc Type and Characteristics....................................................................... 6

◆ DVD-VCR Overviews

■ Front View of the DVD-VCR.......................................................................... 7

■ Rear View of the DVD-VCR........................................................................... 7

■ Infrared Remote Control................................................................................ 8

■ Display Indicators.......................................................................................... 9

■ Accessories................................................................................................... 9

◆ Connecting Your DVD-VCR

■ Deciding How to Connect DVD-VCR............................................................. 10

■ Connecting DVD-VCR to the TV using the Coaxial Cable ............................ 11

■ Connecting DVD-VCR to the TV using the RCA Cable................................. 11

■ Connecting Other Equipment to Your DVD-VCR.......................................... 12

■ Plug & Auto Set Up........................................................................................ 13

■ Tuning Your Television for the DVD-VCR..................................................... 14

■ Deck Control Keys......................................................................................... 15

■ Copying from DVD to VCR............................................................................ 16

■ Inserting Batteries in the Remote Control...................................................... 17

■ Setting the Date and Time............................................................................. 17

■ Menu Language............................................................................................. 18

◆ Setting Up Your DVD-VCR

■ Presetting the Stations Automatically............................................................ 19

■ Presetting the Stations Manually................................................................... 20

■ Clearing a Preset Station............................................................................... 21

■ Changing the Preset Station Table................................................................ 22

■ Selecting the RF OUT Sound Mode (B/G-D/K)............................................. 23

■ Setting the DVD-VCR Output Channel.......................................................... 23

■ Selecting the Colour Mode............................................................................ 24

■ NICAM........................................................................................................... 24

■ Intelligent Picture Control .............................................................................. 25

■ Auto Power off............................................................................................... 26

■ Selecting the Cassette Type.......................................................................... 27

■ Auto Repeat Play........................................................................................... 27

■ Displaying/Hiding On-Screen Information ..................................................... 28

◆ Recording Television Broadcasts

■ Selecting the Recording Speed..................................................................... 28

■ Protecting a Recorded Cassette.................................................................... 29

■ Recording a Programme Immediately........................................................... 29

■ Recording a Programme with Automatic Stop............................................... 30

■ Using the Timer Programming Feature......................................................... 31

■ Checking a Preset Recording........................................................................ 32

■ Cancelling a Preset Programme.................................................................... 32

Contents (cont.)

◆ Playing Back

■ Playing a Cassette......................................................................................... 33

■ Adjusting Picture Alignment Automatically.................................................... 33

■ Adjusting Picture Alignment Manually........................................................... 33

■ Selecting the Audio Output Mode.................................................................. 34

■ Playing a Cassette in Slow Motion................................................................ 34

■ Playing a Sequence Frame by Frame........................................................... 35

■ Playing a Sequence at Variable Speeds....................................................... 35

■ Picture Search, Fast Forward/Rewind........................................................... 36

■ Searching for a Specific Sequence ............................................................... 36

■ Using the Tape Counter ................................................................................ 37

■ Connecting an RCA Audio/Video Input Cable............................................... 38

■ Using the Assemble Edit Function................................................................. 39

■ Recording from Another VCR or Camcorder................................................. 39

■ Audio Dubbing a Pre-recorded Cassette....................................................... 40

■ Using the TV Buttons on the Remote Control ............................................... 41

■ SQPB (Super VHS Quasi Playback)............................................................. 42

◆ DVD Functions

■ Choosing a Connection................................................................................. 43

■ Using the Setup Menu................................................................................... 44

■ Using the Disc Menu Language .................................................................... 45

■ Setting Up the Audio Language Features ..................................................... 46

■ Using the Subtitle Language ......................................................................... 46

■ Setting Up the Parental Control..................................................................... 47

■ Setting Up the Audio Options........................................................................ 48

■ Setting Up the Display Options...................................................................... 49

■ S-Video Connections (for DVD)..................................................................... 50

■ Special Playback Features............................................................................ 51

■ Using the Display Function (DVD/VCD/CD).................................................. 52

■ Repeat Play................................................................................................... 53

■ Program Play (CD)........................................................................................ 54

■ Random Play (CD) ........................................................................................ 54

■ SCREEN FIT Play......................................................................................... 55

■ Selecting the Audio Language (Using the Audio button)............................... 56

■ Selecting the Subtitle Language (Using the Subtitle button)......................... 56

■ Changing the Camera Angle......................................................................... 57

■ Using the BookMark Function (DVD/VCD).................................................... 58

■ Recalling a Marked Scene............................................................................. 58

■ Clearing a Mark............................................................................................. 58

■ Using the Zoom (DVD/VCD).......................................................................... 59

■ MP3 Play....................................................................................................... 60

■ MP3 Play (CD-R MP3 disc requirements)..................................................... 61

Contents (cont.)

◆ Appendix A - Advanced Connections

■ Connecting the FM and AM antennas........................................................... 62

■ Connecting the Speakers.............................................................................. 63

■ LINE3 AUDIO Setting.................................................................................... 64

■ Speaker Volume Control ............................................................................... 64

■ Speaker setup ............................................................................................... 65

■ Dolby Pro Logic II decoder............................................................................ 67

■ SOUND mode/effect function ........................................................................ 68

■ Listening to radio broadcasts......................................................................... 69

■ Presetting stations......................................................................................... 69

◆ Solving Problems

■ Technical Specifications................................................................................ 70

■ Problems and Solutions (VCR)...................................................................... 72

■ Troubleshooting Guide (DVD)....................................................................... 73

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corpration and other rights owners. Use of this copyright protection technology must by authorized by Macrovision Corporized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Symbols

= Step number

☛

➢

NoteImportantHold downPress/push

Safety Instructions

The following illustrations represent precautions.

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.

DO NOT OPEN THE DVD-VCR. Refer to service personnel.

Do NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%).

Do NOT place any objects on the DVD-VCR or remote control.

Do NOT expose the DVD-VCR to direct sunlight.

During a storm and/or lightning, unplug the DVD-VCR from the mains socket and aerial.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS

Do NOT expose the DVD-VCR to any liquids.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

Disc Type and Characteristics

This DVD player is capable of playing the following types of discs with the corresponding logos :

Disc Types

(Logos)

DVD

VIDEO-CD

AUDIO-CD

Recording

Types

Audio

Video

Audio

Video

Audio

Disc Size

12 Cm

8 Cm

12 Cm

8 Cm

12 Cm

8 Cm

Max.

Playing

Time

Single-sided

240 min.

Double-sided

480 min.

Single-sided

80 min.

Double-sided

160 min.

74 min.

20 min.

74 min.

20 min.

Characteristics

• DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.

• Various screen and audio functions can be easily selected through the on-screen menu.

• Video with CD sound, VHS quality & MPEG-1 compression technology.

• An LP is recorded as an analog signal with more distortion. CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!

(CDGs play audio only, not graphics.)

* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the

recording.

Disc Markings

• Playback Region Number

• ”DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

• Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

PAL

• PAL colour system in U.K, France, Germany, etc.

NTSC

• NTSC broadcast system in USA, Canada, japan, South Korea, etc.

• Dolby Digital disc

STEREO

• Stereo disc

Playback Region Number

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

DIGITAL

SOUND

• Digital Audio disc

• DTS disc

Front View of the DVD-VCR

STANDBY/ON

BUTTON

HEADPHON JACK

STOP BUTTON

REW/SKIP BACK BUTTON

DVD DECK

PLAY/PAUSE BUTTON

RECORD BUTTON

F.F/SKIP NEXT BUTTON

OPEN/CLOSE BUTTON

SOUND EFFECT

Rear View of the DVD-VCR

COPY BUTTON

VIDEO CASSETTE

COMPARTMENT

DVD/VCR SELECT BUTTON

PROGRAMME SELECTION BUTTONS

FM/AM

INPUT SELECT

EJECT BUTTON

VOLUME

RADIO FM ANTENNA INPUT

RADIO AM ANTENNA INPUT

AERIAL IN CONNECTOR

OUT TO TV CONNECTOR

LINE IN 1, 2, 3

LINE OUT TO TV

OPTICAL INPUT

COOLING FAN

S-VIDEO OUT

COMPONENT VIDEO OUT

SPEAKER OUT

Infrared Remote Control

5 6

8 9

10 11

12 13

14 15

16 17

18 19

1 STANDBY/ON 2 OPEN/CLOSE, EJECT

3 SPEAKER SELECT 4 TEST 5 MODE, REPEAT

6 ANGLE

7 TV VOLUME 8 TV SELECT

9 DVD, VCR, FM/AM, INPUT

25 26

27 28

31 32

33 34

35 36

37 38 39

SELECT

10 REWIND, SKIP BACK 11 STOP 12 DISPLAY 13 SETUP 14 UP 15 LEFT 16 ENTER 17 RECORD 18 MARK, INDEX 19 AUDIO 20 TITLE, SPEED 21 TV STANDBY/ON 22 MUTE 23 0-9 24 SOUND MODE 25 SOUND EFFECT 26 STEP 27 ZOOM/ATR 28 PROG/TRK 29 AMP VOLUME 30 TV INPUT 31 FAST-FORWARD, SKIP

32 PLAY/PAUSE 33 CLEAR 34 DISC MENU 35 RIGHT 36 DOWN 37 RETURN, A.DUB 38 SUBTITLE, TIMER 39 SCRREEN FIT, SVHS 40 TV/VCR 41 JOG/SHUTTLE

/❷

Display Indicators

1 2 3 4 5 6 7 8 9 19 10 11

12 13 14 15 16 20 17

1 The DVD Deck is selected 2 A DVD, CD, VCD or SVCD is loaded 3 A disc with LPCM (Linear Pulse Code Modulation)

audio is loaded

4 A DVD with a Dolby Digital is loaded 5 A DVD with a DTS soundtrack is loaded

6 The time, counter position, time remaining or

current deck status is displayed

7 The current TV show or video is broadcast in Stereo 8 The Hi-Fi track of a VHS tape is playing

9 A Timer Recording is programmed or in progress.

If blinking there is an error.

10 Tape Speed

12 The status of the DVD deck is graphically displayed 13 The DVD has multiple angles. 14 MP3 15 A MPEG Audio Disc is loaded. 16 The number to the right of the “T” symbol is the

current title number

17 The number to the right of the “C” symbol is the

current chapter number

18 VHS tape is inserted and the VCR Deck is active 19 NICAM Indicator 20 COPY mode Indicator

11 The VCR Deck is selected

Accessories

You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR). Together with your DVD-VCR, you will find the following accessories in the box.

REMOTE CONTROL

BATTERIES

AUDIO & VIDEO CABLE

AM ANTENNA CABLE

OWNER’S INSTRUCTIONS

COAXIAL CABLE

FM ANTENNA CABLE

Deciding How to Connect DVD-VCR

You must take into account various factors when connecting audio or video systems:

◆ Types of connectors available on your systems

◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or

temporarily (camcorder for example)

Your DVD-VCR is equipped with the following connectors.

Connector Location Type Direction Recommended Use

LINE

COMPONENT Rear RCA Out ◆ COMPONENT out (DVD only) output

S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only) output

OUT TO TV Rear 75 Ω Out ◆ Television

IN FROM ANT. Rear 75 Ω In ◆ Aerial

Rear Audio/Video RCA In/Out ◆ Television

◆ Other VCR

coaxial

coaxial ◆ Cable television network

◆ Satellite receiver

☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all

elements are switched off.

Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

Connecting DVD-VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from one of the following sources:

◆ An outdoor aerial

◆ An indoor aerial

◆ A cable television network

◆ A satellite receiver

☛ Make sure that both the television and the DVD-VCR are

switched off

1 Remove the aerial or network input cable from the television. 2 Connect this cable to the 75Ω coaxial socket marked on the

rear of your DVD-VCR.

3 Plug the coaxial cable supplied into the socket on your

DVD-VCR.

4 Plug the other end of the coaxial cable into the connector

previously used for the aerial on the television.

5 To obtain better quality pictures and sound on your television, you

can also connect your DVD-VCR to the television via the RCA cable (see section below) if your television is equipped with this type of connection.

Connecting DVD-VCR to the TV using the RCA Cable

before connecting the cables.

Aerial

RF coaxial cable

You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on the television. You thus:

◆ Obtain better quality sound and pictures

◆ Simplify the setting up procedure of your DVD-VCR

☛

◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.

Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

◆ Make sure that both the television and the DVD-VCR are switched off

before connecting the cables.

1 Connect the coaxial cable as indicated in the above section. 2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear

of the DVD-VCR.

3 Plug the other end into the appropriate connector on the television.

Connecting Other Equipment to Your DVD-VCR

You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following illustrations give a few examples of the connection possibilities.

➢ The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,

such as camcorders, VCRs or sound systems.

Camcorder

VCR

REAR OF THE DVD-VCR

Sound system

Plug & Auto Set up

Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use.

1 Connect the coaxial cable as indicated on page 11.

(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)

2 Plug the DVD-VCR into the mains.

Result: The LANGUAGE SET menu is displayed.

3 Select the required language by pressing the

or❷

buttons.

4 Press ENTER to store the language selected.

Result: A message appears.

5 Press ENTER to start the auto scanning.

◆ The number of stations automatically stored by the DVD-VCR

depends on the number of stations that it has found.

6 Check the data and time. (see page 17) 7 On completion, press RETURN to exit the menu.

➢ Auto preset can be performed by pressing

the VCR continuously for 5 seconds or more with no tape inserted.

(STOP) on

■

AUTO SET UP

PLEASE WAIT

■■■■■■■■■■■■

RETURN

12:01 1/JAN/2003

RETURN

-------I

CLOCK SET

➛❿

❷

60%

WED

Tuning Your Television for the DVD-VCR

You must tune your television for the DVD-VCR only if you are not using a RCA cable

➢ To view pictures from your DVD-VCR when a RCA cable

1 Switch on the television. 2 Switch on the DVD-VCR by pressing STANDBY/ON on the front of

3 Select a programme position on the television to be reserved for

4 Insert the video cassette in the DVD-VCR. Check that the

5 Start a scan on your television or set the television to UHF

6 Fine tune the television until the pictures and sound are obtained

is used, the television must be set to the audio/video mode (AV).

the DVD-VCR or STANDBY/ON on the remote control.

use with your DVD-VCR.

DVD-VCR starts reading the cassette; if not, press

channel 36.

clearly.

❿

button

7 If you cannot find the pictures and sound, or there is interference

from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 23 and Problems and Solutions on page

72).

8 When the picture and sound are perfectly clear, store this channel

at the desired programme position on the television. Result: That programme is now reserved for use with your

DVD-VCR.

Deck Control Keys

The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck.

1 STANDBY/ON Button

Press the STANDBY/ON button on the remote control or front panel to turn on the DVD-VCR.

2 DVD Button

Press the DVD button on the remote control when you want to control the DVD deck.

◆ The DVD indicator will light on the Front Panel Display to show

that the DVD deck is selected.

3 VCR Button

Press the VCR button on remote control when you want to control the VCR deck.

◆ The VCR indicator will light on the Front Panel Display to show

that VHS deck is selected.

4 INPUT Button

Press the INPUT button repeatedly to cycle through all of your input sources, including the Tuner (PR##), Line 1, Line 2 and Line 3 (rear AV input).

Copying from DVD to VCR

The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button.

If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision® encoded DVDs.

1 Insert Disc

Insert the disc you wish to copy in the DVD deck and close the drawer.

2 Insert VHS Tape

Insert a blank VHS videotape into the VCR deck.

3 Copy the DVD to VHS Tape

Press the COPY button on the DVD-VCR front panel.

◆ The DVD will go into Play mode and the VCR will go into Record

mode.

◆ If the DVD disc menu appears, you may need to press the PLAY

button manually to begin copying.

4 Stop the Copy Process

When the DVD is finished playing, press the VCR button on the remote control and then press the STOP button to end the copy.

◆ You must stop the Copy process manually when the DVD movie

ends or the DVD may replay and record over and over again.

☛ The copy is only active PAL Disc system.

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆ Purchase the DVD-VCR

◆ Find that the remote control is no longer working

correctly

1 Push the tab in the direction of the arrow to release the battery

compartment cover on the rear of the remote control.

2 Insert two AA, R6 or equivalent batteries, taking care to respect

the polarities:

◆ + on the battery with + on the remote control

◆ – on the battery with – on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pushing it back into place.

➢ Do not mix different battery types (manganese and

alkaline for example).

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:

◆ Automatically stop programme recording

◆ Preset your DVD-VCR to record a programme

automatically

You must set the date and time when:

◆ You purchase the DVD-VCR

☛ ◆ Do not forget to reset the time when you change

clocks from winter to summer time and vice versa.

1 Press SETUP on the remote control.

Result

: The MAIN MENU is displayed.

2 Press the corresponding

CLOCK SET option.

3 Press the ENTER button to select this option.

Result

: The

4 Press

➛or❿

Result

: The option selected flashes.

5 Press the

Result

: The day of the week is displayed automatically.

CLOCK SET menu is displayed.

to select the hour, minutes, day, month and year.

or❷

buttons to increase or decrease the value.

➢ You can hold the

quickly through the values.

6 On completion, press RETURN twice to exit the menu.

,❷

or❷

or ➛, ❿buttons to select the

buttons down to scroll more

MAIN MENU

CLOCK SET

❷

RETURN

12:00 1/JAN/2003

RETURN

➛❿

CLOCK SET

➛❿

❷

ENTER

WED

LANGUAGE SET

RETURN

Menu Language

MAIN MENU

❷

➛❿

ENTER

1 Open “MAIN MENU”

With the DVD in stop mode, press the SETUP button.

2 Set “Language”

Using the ,❷and ➛, ❿buttons, move the selection arrow to Language set then press ENTER button.

3 Set menu Language

Move the selection bar to your desired Language, then press ENTER button.

❿

English

Français Deutsch Español Italiano Nederlands

RETURN

LANGUAGE SET

❷

ENTER

Presetting the Stations Automatically

VCR

☛ You do not need to preset the stations if you have already

set them automatically (see Plug & Auto Set Up on page 13).

Your DVD-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

◆ Plug & Auto Set up (see page 13)

◆ Automatically

◆ Manually (see page 20)

You can store up to 80 stations.

1 Press the SETUP button on the remote control.

Result

: The MAIN MENU is displayed.

2 Press the corresponding

INSTALLATION option.

3 Press the ENTER button to select this option.

Result

: The INSTALLATION menu is displayed.

4 Press the corresponding

UP option is selected.

And then press the ENTER button to select this option. Result

: A message appears, indicating that any channels

already preset on your DVD-VCR will be deleted.

,❷

or ➛, ❿buttons to select the

or❷

buttons, until the AUTO SET

MAIN MENU

INSTALLATION

RETURN

AUTO SET UP

MANUAL SET UP TV SYSTEM :G VCR OUTPUT CH :CH36

RETURN

YOUR DATA WILL BE LOST

PRESS ENTER TO CONTINUE

❷

➛❿

ENTER

INSTALLATION

❷

ENTER

RETURN TO EXIT

5 Press ENTER to start the auto scanning.

Result

: ◆ The PLEASE WAIT indication flashes on the

television screen.

◆ The first frequency band is scanned and the first

station found is displayed and stored.

◆ The DVD-VCR then searches for the second station

and so on.

◆ When the automatic scanning procedure has

finished, the DVD-VCR switches automatically to programme 1.

➢ The number of stations automatically stored by the DVD-

VCR depends on the number of stations that it has found.

6 If you wish to cancel the auto scanning before the end, press the

RETURN button three times to exit the menu.

➢ ◆ Once the auto scanning procedure has finished, some

stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (see page 21).

AUTO SET UP

PLEASE WAIT

I--------------------I

RETURN

VCR

Presetting the Stations Manually

☛ You do not need to preset the stations manually if you

have already set them automatically.

MAIN MENU

INSTALLATION

RETURN

AUTO SET UP

MANUAL SET UP

TV SYSTEM :G VCR OUTPUT CH :CH36

RETURN

PR CH NAME

2 3 4 5

❷

❿

RETURN DELETE:CLEAR

PR : 1

CH : ---

MFT : NAME : ----

❷

➛ ❿

RETURN

❷

➛❿

ENTER

INSTALLATION

❷

ENTER

TV STATION TABLE

SWAPPING:ENTER

MANUAL TUNING

MEMORY:ENTER

1 Press the SETUP button on the remote control.

Result

: The MAIN MENU is displayed.

2 Press the corresponding

,❷

or ➛, ❿buttons to select the

INSTALLATION option.

3 Press the ENTER button to select this option.

Result

: The INSTALLATION menu is displayed.

4 Press the corresponding

or❷

buttons, until the MANUAL SET

UP option is selected.

5 Press the ENTER button to select a MANUAL SET UP option.

Result

: The TV STATION TABLE menu is displayed.

6 Press the



or ❷buttons to select a programme number as

required.

7 Press the

Result

8 Press the

Result

❿

button to preset the station.

: The MANUAL TUNING menu is displayed.

➛or❿

buttons to start scanning.

: The frequency band is scanned and the first station

found is displayed.

9 Press the

or❷

buttons until the NAME is selected.

The station name is set automatically from the broadcast signal.

10 To change the programme’s name, press the

: The first letter of the name flashes.

Result

❿

button.

11 To... Then...

Select a character Press the or❷button until the in the name required character is displayed

(letters, numbers or “-” character).

Move to the next or Press the ❿or ➛buttons previous character respectively.

12 If you... Then...

Wish to store the ◆ Press the or❷buttons until the MFT station displayed is selected.

◆ Press the

picture, if necessary.

◆ Press ENTER to store the station

➛or❿

buttons to adjust the

Do not wish to ◆ Press the or ❷buttons until the store the station

CH is selected.

displayed ◆ Press the ➛or❿buttons to go on

scanning the frequency band and display the next station

◆ Go back to the beginning of Step 12

13 Repeat this procedure from Step 6 onwards, until all the required

stations have been stored.

14 On completion, press the RETURN button three times to exit the

menu.

☛ You do not need to preset the stations manually if you

have already set them automatically.

Clearing a Preset Station

If you have stored a TV station:

◆ That you do not require

VCR

◆ At the wrong programme position

you can cancel it.

1 Press the SETUP button on the remote control. 2 Press the corresponding

,❷

or ➛, ❿buttons to select the

INSTALLATION option.

3 Press the ENTER button to select this option.

Result

: The INSTALLATION menu is displayed.

4 Press the corresponding

or❷

buttons, until the MANUAL SET

UP option is selected.

5 Press the ENTER button to select this option.

Result: The TV STATION TABLE menu is displayed.

6 Press the corresponding

TV station is selected. (

or❷

PR)

buttons, until the required preset

7 Press the CLEAR button. 8 Repeat the same procedure from Step 6 onwards until all the

required stations have been cleared.

9 On completion, press the RETURN button three times to exit the

menu.

MAIN MENU

INSTALLATION

❷

➛❿

RETURN

AUTO SET UP

MANUAL SET UP

TV SYSTEM :G VCR OUTPUT CH :CH36

RETURN

PR CH NAME

1 003

2 3 4 5

❷

❿

RETURN DELETE:CLEAR

TV STATION TABLE

ENTER

INSTALLATION

❷

ENTER

SWAPPING:ENTER

VCR

Changing the Preset Station Table

You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences.

MAIN MENU

1 Press the SETUP button on the remote control.

INSTALLATION

❷

➛❿

RETURN

AUTO SET UP

MANUAL SET UP

TV SYSTEM :G VCR OUTPUT CH :CH36

RETURN

PR CH NAME

1 003

2 3 4 5

❷

❿

RETURN DELETE:CLEAR

TV STATION TABLE

ENTER

INSTALLATION

❷

ENTER

SWAPPING:ENTER

2 Press the corresponding

,❷

or ➛, ❿buttons to select the

INSTALLATION option.

3 Press the ENTER button to select this option.

Result

: The INSTALLATION menu is displayed.

4 Press the corresponding

or❷

buttons, until the MANUAL SET

UP option is selected.

5 Press the ENTER button to select this option.

Result

: The TV STATION TABLE menu is displayed.

6 Press the corresponding

or❷

buttons, until the required preset TV programme is selected. Result

: The selected station is displayed at the same time on

the television screen.

7 To change the programme number assigned to a station press the

ENTER button on the remote control (For example; To move a TV station in programme 1 to programme 3).

8 Press the

or❷

buttons to select required position and the press

ENTER again to swap the position.

9 On completion, press the RETURN button three times to exit the

menu.

PR CH NAME

1 2

3 003

4 5

❷

❿

RETURN DELETE:CLEAR

TV STATION TABLE

SWAPPING:ENTER

Selecting the RF OUT Sound Mode (B/G-D/K)

You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR.

1 Press SETUP on the remote control.

Result

: The MAIN MENU is displayed.

VCR

MAIN MENU

2 Press the corresponding

,❷

or ➛, ❿buttons to select the

INSTALLATION option.

3 Press the ENTER button to select this option.

Result

: The INSTALLATION menu is displayed.

4 Press the

or❷

buttons, until the TV SYSTEM option is

selected.

Press the ➛or ❿button to select G or K.

6 On completion, press RETURN to exit the menu.

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the DVD-VCR output channel to adjust the frequency in which information is displayed on the screen.

INSTALLATION

❷

RETURN

AUTO SET UP MANUAL SET UP

TV SYSTEM :G

VCR OUTPUT CH :CH36

RETURN

➛❿

INSTALLATION

❷

➛❿

VCR

MAIN MENU

ENTER

1 Press SETUP on the remote control.

Result

: The MAIN MENU is displayed.

2 Press the corresponding

,❷

or ➛, ❿buttons to select the

INSTALLATION option.

3 Press the ENTER button to select this option.

Result

: The

4 Press the

selected.

INSTALLATION menu is displayed.

or❷

buttons, until the VCR OUTPUT CH option is

5 Select the required output channel (CH21~CH69) by pressing the

➛

or ❿buttons.

6 On completion, press RETURN twice to exit the menu.

Then tune your television again (see page 14).

INSTALLATION

❷

RETURN

AUTO SET UP MANUAL SET UP TV SYSTEM :G

VCR OUTPUT CH :CH36

RETURN

➛❿

INSTALLATION

➛❿

❷

ENTER

CH21

CH36

CH69

+ 51 hidden pages