Samsung CHT-200 User Manual
DVD-VCR
PROG
STANDBY/ON
SCREEN FIT ATR
SVHS
DVD
TV VOL.
OPEN/CLOSE
MUTE
MENU
REC
SPEAKER TEST
SOUND MODE
SOUND EFFECT
ANGLE TITLE SUBTITLE
SPEED TIMER
DISC MENU
MODE MARK
REPEAT INDEX
00015D
TV/VCR
INFO. CLEAR
RETURN
/A. DUB
STEP AUDIO
PROG/TRK AMP VOL.
VCR TV INPUT
SELECT
ZOOM
TV
STANDBY/ON
CHT-200
Instruction Manual
www.samsungvcr.com
PAL/NTSC
GB
Contents
◆ FOREWORD
■ Safety Instructions......................................................................................... 5
■ Disc Type and Characteristics....................................................................... 6
◆ DVD-VCR OVERVIEWS
■ Front View of the DVD-VCR.......................................................................... 7
■ Rear View of the DVD-VCR........................................................................... 7
■ Infrared Remote Control................................................................................ 8
■ Display Indicators.......................................................................................... 9
■ Accessories................................................................................................... 9
DVD-VCR
◆ CONNECTING
■ Deciding How to Connect DVD-VCR............................................................. 10
■ Connecting DVD-VCR to the TV using the Coaxial Cable ............................ 11
■ Connecting DVD-VCR to the TV using the RCA Cable................................. 11
■ Connecting Other Equipment to Your DVD-VCR.......................................... 12
■ Plug & Auto Set Up........................................................................................ 13
■ Tuning Your Television for the DVD-VCR..................................................... 14
■ Deck Control Keys......................................................................................... 15
■ Copying from DVD to VCR............................................................................ 16
■ Inserting Batteries in the Remote Control...................................................... 17
■ Setting the Date and Time............................................................................. 17
■ Menu Language............................................................................................. 18
YOUR
OUR DVD-VCR
◆ SETTING
UP Y
■ Presetting the Stations Automatically............................................................ 19
■ Presetting the Stations Manually................................................................... 20
■ Clearing a Preset Station............................................................................... 21
■ Changing the Preset Station Table................................................................ 22
■ Setting the RF OUT Sound Mode (K-B-M-G-I)............................................. 23
■ Setting the DVD-VCR Output Channel.......................................................... 23
■ Selecting the Colour Mode............................................................................ 24
■ NICAM........................................................................................................... 24
■ Intelligent Picture Control .............................................................................. 25
■ Auto Power off............................................................................................... 25
■ Selecting the Cassette Type.......................................................................... 26
■ Auto Repeat Play........................................................................................... 26
■ Displaying/Hiding On-Screen Information ..................................................... 27
■ Selecting the Recording Speed..................................................................... 27
■ Protecting a Recorded Cassette.................................................................... 28
■ Recording a Programme Immediately........................................................... 28
■ Recording a Programme with Automatic Stop............................................... 29
■ Using the Timer Programming Feature......................................................... 30
■ Checking a Preset Recording........................................................................ 31
■ Cancelling a Preset Programme.................................................................... 31
2
Contents (cont.)
◆ PLAYING BACK
■ Playing a Cassette......................................................................................... 32
■ Adjusting Picture Alignment Automatically.................................................... 32
■ Adjusting Picture Alignment Manually........................................................... 32
■ Selecting the Audio Output Mode.................................................................. 33
■ Playing a Cassette in Slow Motion................................................................ 33
■ Picture Search, Fast Forward/Rewind........................................................... 34
■ Searching for a Specific Sequence ............................................................... 34
■ Using the Tape Counter ................................................................................ 35
■ Connecting an RCA Audio/Video Input Cable............................................... 36
■ Recording from Another VCR or Camcorder................................................. 37
■ Audio Dubbing a Pre-recorded Cassette....................................................... 38
■ Using the TV Buttons on the Remote Control ............................................... 39
■ SQPB (Super VHS Quasi Playback)............................................................. 40
◆ DVD FUNCTIONS
■ Choosing a Connection................................................................................. 41
■ Using the DVD SETUP.................................................................................. 42
■ Using the Disc Menu Language .................................................................... 43
■ Setting Up the Language Features................................................................ 44
■ Setting Up the Parental Control..................................................................... 45
■ Setting Up the Audio Options........................................................................ 46
■ Setting Up the Display Options...................................................................... 47
■ S-Viedo Connections (for DVD)..................................................................... 48
■ Special Playback Features............................................................................ 49
■ Using the Display Function (DVD)................................................................. 50
■ Using the Display Function (CD/VCD)........................................................... 50
■ Repeat Play................................................................................................... 51
■ Programmed Playback (CD).......................................................................... 52
■ Random Playback (CD)................................................................................. 52
■ SCREEN FIT Play......................................................................................... 53
■ Selecting the Audio Language....................................................................... 54
■ Selecting the Subtitle Language.................................................................... 54
■ Changing the Camera Angle......................................................................... 55
■ Using the Bookmark Function(DVD/VCD)..................................................... 56
■ Using the Zoom (DVD/VCD).......................................................................... 57
■ MP3 Play....................................................................................................... 58
■ CD-R MP3 Disc Requirements...................................................................... 59
GB
◆ Appendix A - Advanced Connections
■ Connecting the Speakers.............................................................................. 60
■ Speaker Volume Control ............................................................................... 61
■ Speaker setup ............................................................................................... 62
■ Dolby Pro Logic II decoder............................................................................ 64
■ SOUND mode/effect function........................................................................ 65
3
GB
Contents (cont.)
◆ SOLVING PROBLEMS
■ Technical Specifications................................................................................ 66
■ Problems and Solutions (VCR)...................................................................... 68
■ Troubleshooting Guide (DVD)....................................................................... 69
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corpration and
other rights owners. Use of this copyright protection technology must
by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Symbols
1
= Step number
1
4
1
☛
➢
NoteImportantHold downPress/push
Safety Instructions
HH
5°C
40°C
10% 75%
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
GB
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT place any objects on
the DVD-VCR or remote
control.
Do NOT expose the DVD-VCR
to direct sunlight.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
Do NOT expose the DVD-VCR
to any liquids.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
5
GB
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos :
Disc Types
(Logos)
DVD
VIDEO-CD
AUDIO-CD
Recording
Types
Audio
+
Video
Audio
+
Video
Audio
Disc Size
12 Cm
8 Cm
12 Cm
8 Cm
12 Cm
8 Cm
Max.
Playing
Time
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
74 min.
20 min.
74 min.
20 min.
Characteristics
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the
recording.
Disc Markings
~
• Playback
Region
Number
• ”DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
• Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
PAL
• PAL colour system
in U.K, France,
Germany, China
etc.
NTSC
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
• Dolby
Digital disc
STEREO
• Stereo
disc
Playback Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
DIGITAL
SOUND
• Digital
Audio disc
• DTS disc
Front View of the DVD-VCR
INPUT MUTE
GB
F.F/SKIP NEXT
BUTTON
PLAY/STILL
BUTTON
RECORD
BUTTON
OPEN/CLOSE
BUTTON
COPY BUTTON
SOUND MODE
STANDBY/ON
BUTTON
STOP BUTTON
DVD DECK
REW/SKIP BACK
BUTTON
Rear View of the DVD-VCR
VIDEO CASSETTE
COMPARTMENT
DVD/VCR SELECT
BUTTON
PROGRAMME
SELECTION
BUTTONS
INPUT
SELECT
MUTE
EJECT BUTTON
VOLUME
AERIAL IN
CONNECTOR
OUT TO TV
CONNECTOR
LINE IN 1, 2, 3
LINE OUT TO TV
COOLING FAN
S-VIDEO OUT
COMPONENT
VIDEO OUT
SPEAKER OUT
7
GB
STANDBY/ON
SCREEN FIT ATR
SVHS
DVD
TV VOL.
OPEN/CLOSE
MUTE
MENU
REC
SPEAKER TEST
SOUND MODE
SOUND EFFECT
ANGLE TITLE SUBTITLE
SPEED TIMER
DISC MENU
MARK
REPEAT
INDEX
00015D
TV/VCR
INFO. CLEAR
RETURN
/A. DUB
F.ADV / STEP AUDIO
PROG/TRK AMP VOL.
VCR TV INPUT
SELECT
ZOOM
TV
STANDBY/ON
Infrared Remote Control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1 STANDBY/ON
19
2 SCREEN FIT, SVHS
3 DVD, VCR, TV, INPUT
SELECT
20
4 TV VOLUME
5 OPEN/CLOSE
6 MUTE
7 REWIND, SKIP BACK
8 STOP
21
9 MENU
10 INFO.
11 ENTER
22
12 LEFT
13 RECORD
14 TEST
23
15 SPEAKER
16 ANGLE
17 REPEAT
18 TITLE, SPEED
24
19 TV STANDBY/ON
25
20 0-9
21 ZOOM, ATR
26
22 PROG/TRK
27
23 AMP VOLUME
28
24 AUDIO
25 F.ADV/STEP
29
30
26 FAST-FORWARD, SKIP
NEXT
27 PLAY/STILL
31
28 RETURN/A.DUB
29 CLEAR
32
30 UP
33
31 RIGHT
34
32 DOWN
35
33 TV/VCR
36
34 SOUND MODE
35 SOUND EFFECT
37
36 DISC MENU
38
37 MARK, INDEX
38 SUBTITLE,TIMER
8
Display Indicators
STANDB
Y/O
N
SCR
EEN
F
IT
ATR
SV
H
S
D
VD
TV VO
L.
O
P
E
N
/
C
L
O
S
E
M
UTE
M
E
NU
R
EC
S
P
E
A
K
E
R
T
E
S
T
S
O
U
N
D
M
O
D
E
S
O
U
N
D
E
F
F
E
C
T
A
N
G
LE
T
ITLE
SU
B
TITL
E
SP
E
ED
TIM
E
R
D
ISC
M
EN
U
M
AR
K
R
E
PE
A
T
IN
D
E
X
0
0
0
1
5
D
TV/V
C
R
IN
FO.
CLE
AR
R
E
TUR
N
/A. DU
B
F.AD
V / STEP
AU
DIO
PR
OG
/TRK
AM
P VOL
.
VC
R
TV IN
PU
T
S
E
L
E
C
T
ZO
O
M
T
V
S
T
A
N
D
B
Y
/
O
N
1 2 3 4 5 6
7 8 9 10
GB
1 The DVD Deck is active.
2 DVD or CD media is loaded.
3 The time, counter position, time remaining or current
deck status is indicated.
4 Recording is in progress (normal and timer).
5 VHS videotape is loaded.
6 The VCR Deck is active.
7 A DVD with a DTS soundtrack is loaded.
8 The Hi-Fi track of a VHS videotape is playing or
the current TV program or video is broadcast in
Stereo.
9 Timer Recording is in progress. When it blinks an
error has occurred. When recording is on, it displays
without the clock hands. It also blinks when you
pause the VCR.
10 DVD to VHS copy is in progress
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO CABLE
OWNER’S INSTRUCTIONS
COAXIAL CABLE
9
GB
Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type Direction Recommended Use
LINE
COMPONENT Rear RCA Out ◆ COMPONENT out (DVD only)
output
S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only)
output
OUT TO TV Rear 75 Ω Out ◆ Television
IN FROM ANT. Rear 75 Ω In ◆ Aerial
Rear Audio/Video RCA In/Out ◆ Television
◆ Other VCR
coaxial
coaxial ◆ Cable television network
◆ Satellite receiver
☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all
elements are switched off
Refer to the documentation supplied with your equipment for detailed connection
instructions and associated safety precautions.
.
10
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
☛ Make sure that both the television and the DVD-VCR are
switched off
1 Remove the aerial or network input cable from the television.
2 Connect this cable to the 75Ω coaxial socket marked IN (FROM
ANT.) on the rear of your DVD-VCR.
3 Plug the coaxial cable supplied into the socket marked OUT (TO TV)
on your DVD-VCR.
4 Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5 To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
Connecting DVD-VCR to the TV using the RCA Cable
before connecting the cables.
TV
4
GB
2
3
Aerial
TV
3
RF coaxial cable
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
☛
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆ Make sure that both the television and the DVD-VCR are switched off
before connecting the cables.
2
1 Connect the coaxial cable as indicated in the above section.
2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DVD-VCR.
3 Plug the other end into the appropriate connector on the television.
11
GB
Connecting Other Equipment to Your DVD-VCR
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢ The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
Camcorder
VCR
REAR OF THE DVD-VCR
Sound system
12
Plug & Auto Set up
GB
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result
: The LANGUAGE SET menu is displayed.
3 Select the required language by pressing the
or❷
buttons.
4 Press ENTER to store the language selected.
Result
: A message appears.
5 Press ENTER button.
Result
: The SYSTEM SELECT menu is displayed.
6 Press the corresponding
,❷
or ➛, ❿buttons to select the your
SYSTEM SELECT.
7 Press ENTER to start the auto scanning.
◆ The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
8 On completion, press RETURN twice to exit the menu.
Auto preset can be performed by pressing (STOP) on the
➢
DVD-VCR continuously for 5 seconds or more with no
tape inserted.
LANGUAGE SET
❿
English
Français
Deutsch
Español
Italiano
Nederlands
RETURN
AUTO SET-UP WILL BE
STARTED.
CHECK ANTENNA AND
TV CABLE CONNECTION.
RETURN PROCEED:ENTER
SYSTEM-B/G SYSTEM-D/K
SYSTEM-I SYSTEM-B/B
U.S-ANT U.S-HRC
U.S-IRC JAPAN
RETURN
I
■■■■■■■■■■■■
❷
SYSTEM SELECT
❷
AUTO SET UP
PLEASE WAIT
-------I
➛ ❿
ENTER
ENTER
60%
RETURN
CLOCK SET
12:00 1/JAN/2004
❷
RETURN
➛❿
13
THU
GB
MENU INFO. CLEAR
RETURN
/A. DUB
STANDBY/ON
Tuning Your Television for the DVD-VCR
You must tune your television for the DVD-VCR only if you are not
TV
STANDBY/ON
using a RCA cable
➢ To view pictures from your DVD-VCR when a RCA cable
2
1 Switch on the television.
2 Switch on the DVD-VCR by pressing STANDBY/ON on the front of
3 Select a programme position on the television to be reserved for
4
4 Insert the video cassette in the DVD-VCR. Check that the
5 Start a scan on your television or set the television to UHF
6 Fine tune the television until the pictures and sound are obtained
is used, the television must be set to the audio/video
mode (AV).
the DVD-VCR or STANDBY/ON on the remote control.
use with your DVD-VCR.
DVD-VCR starts reading the cassette; if not, press
channel 36.
clearly.
❿
II
button
.
7 If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on page
67).
8 When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
: That programme is now reserved for use with your
Result
DVD-VCR.
14
Deck Control Keys
STANDBY/ON
SCREEN FIT
SVHS
DVD
TV VOL.
PROG/TRK AMP VOL.
VCR TV INPUT
SELECT
ZOOM
INPUT MUTE
The DVD-VCR uses one set of controls to operate both
following keys are helpful in successfully controlling each deck.
1 STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
DVD Button
2
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3 VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
INPUT Button
4
Press the INPUT button repeatedly to cycle through all of your
input sources, including the Tuner (PR##), Line 1, Line 2 and Line
3 (rear AV input).
decks. The
GB
1
1
3
2
4
15
GB
INPUT MUTE
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
INPUT MUTE
2
1 Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2 Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3 Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆ The DVD will go into Play mode and the VCR will go into Record
mode.
4 Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆ You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
3
SVHS
SELECT
DVD
VCR TV INPUT
TV VOL. PROG/TRK AMP VOL.
OPEN/CLOSE
MENU INFO. CLEAR
4
MUTE
4
F.ADV / STEP AUDIO
ZOOM
RETURN
/A. DUB
☛ The copy is only active PAL Disc system.
16
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AAA, R6 or equivalent batteries, taking care to respect
the polarities:
◆ + on the battery with + on the remote control
◆ – on the battery with – on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢ Do not mix different battery types (manganese and
alkaline for example).
GB
1
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
◆ You purchase the DVD-VCR
1 Press MENU on the remote control.
Result
: The MAIN MENU is displayed.
2 Press the corresponding
CLOCK SET option.
3 Press the ENTER button to select this option.
Result
4 Press
: The
➛or❿
CLOCK SET menu is displayed.
to select the hour, minutes, day, month and year.
Result: The option selected flashes.
5 Press the
Result
or❷
: The day of the week is displayed automatically.
➢ You can hold the
quickly through the values.
6 On completion, press RETURN to exit the menu.
,❷
or ➛, ❿buttons to select the
buttons to increase or decrease the value.
or❷
buttons down to scroll more
MAIN MENU
CLOCK SET
➛❿
RETURN
12:00 1/JAN/2004
RETURN
❷
CLOCK SET
❷
➛❿
ENTER
THU
17
GB
MENU INFO. CLEAR
RETURN
/A. DUB
Menu Language
1 Open “MAIN MENU”
With the DVD in stop mode, press the MENU button.
1
LANGUAGE SET
RETURN
❿
RETURN
❷
English
Français
Deutsch
Español
Italiano
Nederlands
MAIN MENU
➛❿
ENTER
LANGUAGE SET
❷
ENTER
2 Set “LANGUAGE”
Using the ,❷or ➛, ❿buttons, move the selection arrow to
Language set then press ENTER button.
3 Set menu Language
Move the selection bar to your desired Language, then press
ENTER button.
4 On completion, press RETURN to exit the menu.
18
Presetting the Stations Automatically
VCR
GB
☛ You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 20)
You can store up to 80 stations.
1 Press the MENU button on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding
INSTALLATION option.
3 Press the ENTER button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding
option is selected. And then press the
option.
Result: The SYSTEM SELECT menu is displayed.
5 Press the corresponding
SYSTEM SELECT.
,❷
or ➛, ❿buttons to select the
or ❷buttons, until the AUTO SET UP
,❷
or ➛, ❿buttons to select the your
button to select this
ENTER
MAIN MENU
INSTALLATION
❷
➛❿
INSTALLATION
❷
SYSTEM SELECT
➛ ❿
❷
ENTER
ENTER
ENTER
RETURN
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
SYSTEM-B/G SYSTEM-D/K
SYSTEM-I SYSTEM-B/B
U.S-ANT U.S-HRC
U.S-IRC JAPAN
RETURN
6 Press ENTER button.
Result
: A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
7 Press ENTER to start the auto scanning.
Result:
◆ The PLEASE WAIT indication flashes on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second station
and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢ The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
8 If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
➢ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select the
stations with the best reception and delete the ones no
longer required (see page 21).
YOUR DATA WILL BE LOST
PRESS ENTER TO CONTINUE
RETURN TO EXIT
AUTO SET UP
PLEASE WAIT
I--------------------I
RETURN
19
2%
VCR
Presetting the Stations Manually
GB
MAIN MENU
INSTALLATION
RETURN
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
PR CH NAME SYSTEM
1
2
3
4
5
❷
RETURN DELETE:CLEAR
SYSTEM : B/G
PR : 1
CH : ---
MFT : NAME : ----
❷
RETURN
❷
➛❿
INSTALLATION
TV STATION TABLE
❿
➛ ❿
SWAPPING:ENTER
MANUAL TUNING
MEMORY:ENTER
❷
ENTER
ENTER
☛ You do not need to preset the stations manually if you
have already set them automatically.
1 Press the MENU button on the remote control.
Result
: The MAIN MENU is displayed.
2 Press the corresponding
INSTALLATION option.
3 Press the ENTER button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding
UP option is selected.
5 Press the ENTER button to select a MANUAL SET UP option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the
or ❷buttons to select a programme number as
required.
7 Press the
Result
8 Press the
❿
button to preset the station.
: The MANUAL TUNING menu is displayed.
or ❷buttons until the SYSTEM is selected.
9 Select the required system by pressing the
10 Press the
11 Press the
Result
12 Press the
The station name is set automatically from the broadcast signal.
or ❷buttons until the CH is selected.
➛or❿
: The frequency band is scanned and the first station
found is displayed.
or❷
13 To change the programme’s name, press the
: The first letter of the name flashes.
Result
14 To... Then...
Select a character Press the or❷button until the
in the name required character is displayed
Move to the next or Press the ➛or❿buttons
previous character respectively.
If you... Then...
15
Wish to store the ◆ Press the or❷buttons until the MFT
station displayed is selected.
,❷
or ➛, ❿buttons to select the
or❷
buttons, until the MANUAL SET
➛or❿
buttons to start scanning.
buttons until the NAME is selected.
❿
button.
(letters, numbers or “-” character).
◆ Press the
➛or❿
buttons to adjust the
picture, if necessary.
◆ Press ENTER to store the station
buttons.
20
Do not wish to ◆ Press the or ❷buttons until the
store the station CH is selected.
displayed
◆ Press the
➛or❿
buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 9
16 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
17 On completion, press the RETURN button three times to exit the
menu.
☛ You do not need to preset the stations manually if you
have already set them automatically.
Clearing a Preset Station
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
VCR
GB
MAIN MENU
1 Press the MENU button on the remote control.
2 Press the corresponding
,❷
or ➛, ❿buttons to select the
INSTALLATION option.
3 Press the ENTER button to select this option.
Result
: The INSTALLAION menu is displayed.
4 Press the corresponding
or❷
buttons, until the MANUAL SET
UP option is selected.
5 Press the ENTER button to select this option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding
TV station is selected. (
or❷
PR)
buttons, until the required preset
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button three times to exit the
menu.
INSTALLATION
❷
➛❿
RETURN
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
PR CH NAME SYSTEM
1 003
2
3
4
5
❷
❿
RETURN DELETE:CLEAR
SWAPPING:ENTER
ENTER
INSTALLATION
❷
ENTER
TV STATION TABLE
21
Loading...