Samsung CB-21K5ML, CB-21N30F7 User Manual

COLOUR TELEVISION

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference

REMOTE CONTROL

ON-SCREEN MENUS

ENJOY GAME

ENG

Safety Instructions

The following illustrations represent the precautions to be taken when using and moving your television

Do NOT expose the television to extreme temperature conditions (below 50C and above 350C) or to extreme humidity conditions (less than 10% and more than 75%).

If the television is broken, do not try to repair it yourself. Contact qualified survice personnel.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.

➢

Do NOT expose the television to direct sunlight.

During a storm conditions (especially when there is lightening) unplug the television from the mains socket & aerial.

Do NOT expose the television to any liquids.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

Caution

The lightning flash and arrow head

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION :

NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING :

RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

☛

TO PREVENT ELECTRICAL SHOCK,DO

TO PREVENT DAMAGE WHICH MAY

The main voltage is ind the TV set and the frequency is 50 or 60Hz.

icated on

the rear of

within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.

The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

Mode System

CS PAL-B/G, D/K, I, SECAM-B/G,D/K, I,

NTSC4.43 (NTSC3.58; option)

CB PAL-B/G

CZ PAL-B/G, D/K, I, SECAM-B/G,D/K, I,

NTSC4.43

Infrared Remote Control (Depending on Model)

Buttons and markings are subject to change

➣

TELEVISION STAND-BY

DIRECT CHANNEL SELECTION

ONE/TWO /THREE-DIGIT

CHANNEL SELECTION

VOLUME INCREASE

TEMPORARY SOUND SWITCH-OFF

VOLUME DECREASE

TUNER/CABLE NETWORK

SELECTION

MENU DISPLAY

SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED

NEXT CHANNEL

EXTERNAL INPUT SELECTION

PREVIOUS CHANNEL

INFORMATION DISPLAY

EXIT FROM ANY DISPLAY

MOVE TO THE REQUIRED MENU

ADJUST AN OPTION VALUE

RESPECTIVELY

SOUND EFFECT SELECTION

GAME KEY

TURBO SOUND

CHANNEL SCAN KEY

The performance of the remote control may be affected by bright light.

OPTION/

CHANGE CONFIRMATION

PICTURE SIZE

AUTOMATIC SWITCH OFF

PICTURE MODEL SLECTION

SOUND MODE SELECTION

75Ω

Rear of TV

Connecting the Aerial (or Cable Television Network)

To view television channel correctly,a signal must be received by the set from one of the following sources:

An outdoor aerial A cable television network

Plug the arrial or cable network input cable to the 75 Ω coaxial socket on the rear of the television.

Cable Television Network

Switching Your Television On and Off

The mains lead is attached to the rear of the television

1 Plug the mains lead into an appropriate socket. ➢ The mains voltage is indicated on the ear of the TV set and the

frequency is 50 or 60Hz.

2 Press the POWER (ON/OFF) button on the front of the television.

Result : The standby indicator lights up on the front panel

3 Press the POWER button on the remote control to switch the

television on. Result : The last watched programme reselected automatically.

4 To swith your television off, press the POWER (ON/OFF) button

again on the front of the television,

Placing Your Television in Standby mode

Your television can be placed in Standby mode, in order to reduce:

Power consumption Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

The television is placed automatically in Standby mode when you turn it On.

1 Press the POWER button on the remote control.

Result : The screen is turned off and the standby indicator on the front of the television lights up.

2 To switch the screen back on, simply press the power button

again on the remote control.

➢ Do not leave your television in standby mode for long period of time

(when you are away on holiday, for example). In this case, you should switch it off completely.

Plug & play Feature

1 If the television is in standby mode, press the POWER button on the remote control.

Result : The The message ‘Plug & Play’ is displayed. It flickers for little while and then the ‘Language’ menu is automatically displayed.

Plug & Play

Ant. Input Check

RETURN

ENTER

P 1 102MHZ

STOP

ENTER EXIT

Time

Clock - - : - - am



Move Exit

ENJOY YOUR WATCHING

ENTER

SETUP

PLUG & PLAY

LANG. : ENGLISH

TIME CHILD LOCK

MOVE ENTER RETURN

7 %

2 Press the ENTER button to enter the language and then the message “Ant Input Check” is displayed.

3 Make sure that the antenna is connected to the TV, and then press the

Result : The horizontal bar is displayed, and then channels are stored in an order which reflects their position in the frequency range.

4 When searching and storing is complete, the “Time” menu is displayed.

5 Press the  or  button to move to the hour or minute. Set the hour or minute by pressing the

6 When you have finished, press the

Result : The message “ENJOY YOUR WATCHING” is displayed.

If you want to reset this feature...

7 1 Press the MENU button then pess the  or  button to select the “Set UP”,and then press Enter

2 Select the “Plug & Play” by pressing the  press th

Result : The message “Plug & Play ” is displayed.

 or  button to select required language. Press the

ENTER button to store the channel.

 or  button.

MENU button.

button.

or  button,and then

e Enter button.

Choosing Your Language

PLUG & PLAY

LANG. : ENGLISH

TIME CHILD LOCK

MOVE ENTER RETURN

SETUP

When you start using your television for the first time you must select the language, which will be used for displaying menus and indications.

“Set UP”.

2 Press

language by pressing the Enter button repeatedly.

3 When you have finished, press the EXIT button or press the MENU

button repeatedly to return to normal viewing.

+ or - button to select the “Language” and select a particular

+ 14 hidden pages