![](/html/26/26f6/26f62e10e9b573bf46a47418be639f2da9e954e0abf08850d070cd5cec6c0fc6/bg1.png)
COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual thoroughly,
Control Panel
➢
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Standby indicator
6 Power on/off
◆ You can use the 3 buttons to switch the TV on when it is
◆ The 2 and 3 buttons also have the same function as the
◆ If the remote control no longer works or you have
and retain it for future reference.
Register your product at
www.samsung.com/global/register
(depending on the model)
The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
in standby mode depending on the model.
œ/√/†/… buttons on the remote control.
misplaced it, you can use the controls on the panel of the
television.
Connection Panel
The actual configuration of your TV may be different,
➢
depending on your model.
Rear Panel
or
Whenever you connect an audio or video system to your
☛
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The SCART2 connector is used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player.
(depending on the model)
or
cable television
network
continued...
Connecting to the RCA Input
The RCA4 connectors are used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player. (When using the mono equipment, connect
to the AUDIO-L input connector.)
Connecting to the RCA Output
The RCA3 connectors are used for equipment, such as a
recording VCR or audio system.
Front (or Side) Panel
1 Audio input
2 Video input
3 Headphone jack
or
3 Headphone jack
2 Video input
1 Audio input
Please be sure to match the color coded input terminals
☛
and cable jacks.
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting Headphones
The 3 (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
When both the front (or side) AV and rear connectors
➢
are connected to external equipment, the front (or
side) AV receives priority.
English - 1
AA68-03721A-04
![](/html/26/26f6/26f62e10e9b573bf46a47418be639f2da9e954e0abf08850d070cd5cec6c0fc6/bg2.png)
Remote Control
Operation of remote control may be affected by bright
➢
artificial light near to the TV.
(depending on the model)
44
MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or
button.
55
66
77
88 …… / †† / œœ / √√
99
00
!!
@@
/
Used to increase or
decrease the volume.
TV
Used to return to the TV
mode when it is in
external input mode.
MENU
Used to display the onscreen menu or return to
the previous menu.
Used to control the
cursor in the menu.
DUAL I-II (option)
Used to select the
sound mode.
TURBO (option)
Used to select the turbo
sound option.
S.MENU
Used to display the
sound menu.
PRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
##
VIDEO
Used to display all of the
available video sources.
$$
P/
Used to display the next
or previous stored
channel.
%%
INFO
Used to view the
channel information and
setting status you
selected.
^^
EXIT
Used to exit from any
display or return to
normal viewing.
&&
ENTER
While using the onscreen menus, press the
ENTER button to
activate (or change) a
particular item.
**
P.SIZE
Used to change the
screen size.
((
SLEEP
Used to select a preset
time interval for
automatic shut off.
))
P.MODE
Used to select the
picture effect.
aa
S.MODE (option)
Used to select the
sound effect.
Switching the Television On and Off
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
➢
television and the frequency is 50 or 60Hz.
2 Press the button (On/Off) on the front (or side) of the
television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” on page 3 or “Channel Manual Store” on page 4.
If the television is initially powered on, several basic
➢
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
4 To switch the television off, press the button (On/Off)
on the front (or side) of the television.
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2 To switch the television back on, simply press it again.
11
POWER
Used to switch the TV
on and off.
22
Numeric buttons
Used to select channels
directly.
33
-/--
Used to select a channel
numbered ten or over.
Press this button, then
“--” symbol is displayed.
Enter the two-digit
channel number.
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+” and “-” ends of the
batteries are inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
➢
English - 2
Do not leave the television in standby mode for long
☛
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.