Samsung CB21M16 Owner's Instructions Manual

COLOUR
TELEVISION

Owner’s Instructions

ENG

REMOTE CONTROL

ON-SCREEN MENUS

ENJOY GAME

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference

2

Mode System

CS PAL-B/G, D/K, I, SECAM-B/G,D/K, I,

NTSC4.43 (NTSC3.58; option)

CB PAL-B/G

☛

The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.

The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.

!

CZ PAL-B/G, D/K, I, SECAM-B/G,D/K, I,

NTSC4.43

!

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION :

TO PREVENT ELECTRICAL SHOCK,DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

WARNING :

TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

The main voltage is ind

icated on

the rear of

the TV set and the frequency is 50 or 60Hz.

Safety Instructions

Caution

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

➢

Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.

The following illustrations represent the precautions to be taken when using and moving your television

Do NOT expose the television to
extreme temperature conditions
(below 50C and above 350C) or
to extreme humidity conditions
(less than 10% and more than
75%).

Do NOT expose the television to
direct sunlight.

Do NOT expose the television to
any liquids.

If the television is broken, do not
try to repair it yourself. Contact
qualified survice personnel.

During a storm conditions
(especially when there is
lightening) unplug the television
from the mains socket & aerial.

If the remote control is not used
for a long period of time, remove
the batteries and store it in a cool,
dry place.

Infrared Remote Control (Depending on Model)

Buttons and markings are subject to change

3

➣

The performance of the remote control may be affected by bright light.

TELEVISION STAND-BY

DIRECT CHANNEL SELECTION

VOLUME INCREASE

TEMPORARY SOUND SWITCH-OFF

MENU DISPLAY

MOVE TO THE REQUIRED MENU

OPTION/

ADJUST AN OPTION VALUE

RESPECTIVELY

GAME KEY

EXTERNAL INPUT SELECTION

EXIT FROM ANY DISPLAY

PREVIOUS CHANNEL

CHANGE CONFIRMATION

INFORMATION DISPLAY

AUTOMATIC SWITCH OFF

ONE/TWO /THREE-DIGIT

CHANNEL SELECTION

TUNER/CABLE NETWORK

SELECTION

SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED

PICTURE SIZE

VOLUME DECREASE

NEXT CHANNEL

SOUND EFFECT SELECTION

TURBO SOUND

CHANNEL SCAN KEY

PICTURE MODEL SLECTION

SOUND MODE SELECTION

1 Press the POWER button on the remote control.

Result : The screen is turned off and the standby indicator on
the front of the television lights up.

4 To swith your television off, press the POWER (ON/OFF) button

again on the front of the television,

3 Press the POWER button on the remote control to switch the

television on.
Result : The last watched programme reselected automatically.

2 Press the POWER (ON/OFF) button on the front of the television.

Result : The standby indicator lights up on the front panel

2 To switch the screen back on, simply press the power button

again on the remote control.

To view television channel correctly,a signal must be received by
the set from one of the following sources:

The mains lead is attached to the rear of the television

Your television can be placed in Standby mode, in order to reduce:

The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).

The television is placed automatically in Standby mode when you
turn it On.

1 Plug the mains lead into an appropriate socket.
➢ The mains voltage is indicated on the ear of the TV set and the

frequency is 50 or 60Hz.

➢ Do not leave your television in standby mode for long period of time

(when you are away on holiday, for example).
In this case, you should switch it off completely.

Plug the arrial or cable network input cable to the 75 Ω coaxial socket on
the rear of the television.

An outdoor aerial
A cable television network

Power consumption
Wear of the cathode ray tube

Connecting the Aerial (or Cable Television Network)

Switching Your Television On and Off

Placing Your Television in Standby mode

75Ω

Cable
Television
Network

Rear of TV

4

Plug & play Feature

Choosing Your Language

5

Plug & Play

RETURN

Ant. Input Check

Move Exit

Clock - - : - - am

Time

ENJOY YOUR WATCHING

When you start using your television for the first time you must
select the language, which will be used for displaying menus and
indications.

1 If the television is in standby mode, press the POWER button on
the remote control.

Result : The The message ‘Plug & Play’ is displayed. It flickers
for little while and then the ‘Language’ menu is
automatically displayed.

2 Press the

 or  button to select required language. Press the

ENTER button to enter the language and then the message
“Ant Input Check” is displayed.

3 Make sure that the antenna is connected to the TV, and then press
the

ENTER button to store the channel.

Result : The horizontal bar is displayed, and then channels are
stored in an order which reflects their position in the
frequency range.

4 When searching and storing is complete, the “Time” menu is
displayed.

2 Press

+ or - button to select the “Language” and select a particular

language by pressing the Enter button repeatedly.

3 When you have finished, press the EXIT button or press the MENU

button repeatedly to return to normal viewing.

5 Press the  or  button to move to the hour or minute. Set the
hour or minute by pressing the

 or  button.

6 When you have finished, press the

MENU button.

Result : The message “ENJOY YOUR WATCHING” is displayed.

7

If you want to reset this feature...

1 Press the MENU button then pess the  or  button to select
the “Set UP”,and then press Enter

button.

2 Select the “Plug & Play” by pressing the 

or  button,and then

press th

e Enter button.

Result : The message “Plug & Play ” is displayed.



ENTER

ENTER EXIT

STOP

P 1 102MHZ

7 %

SEARCH

ENTER

MOVE ENTER RETURN

TV

SETUP

LANG. : ENGLISH

PLUG & PLAY

TIME
CHILD LOCK

MORE

MOVE ENTER RETURN

TV

SETUP

LANG. : ENGLISH

PLUG & PLAY

TIME
CHILD LOCK

MORE

“Set UP”.