Samsung HW-C700B, C770S, C770BS-XAC, HW-C770BS, HW-C770S User Manual

HW-C700
HW-C700B
HW-C770S
HW-C770BS

AV Receiver System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,
please register your product at

www.samsung.com/register

HW-C700-C770S-C770BS-XAC_0616.in1 1HW-C700-C770S-C770BS-XAC_0616.in1 1 2010-06-17  10:06:392010-06-17  10:06:39

Safety information

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates “dangerous voltage”

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.

WARNING

To reduce the risk of fi re or electric shock, do not expose this appliance to rain or moisture.

CAUTION

Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be
placed on the apparatus.

inside the product that presents a risk of
electric shock or personal injury.

This symbol indicates important instructions
accompanying the product.

2

HW-C700-C770S-C770BS-XAC_0616.in2 2HW-C700-C770S-C770BS-XAC_0616.in2 2 2010-06-17  10:06:562010-06-17  10:06:56

PRECAUTIONS

2.7 inches

3.9 inches

3.9 inches

3.9 inches

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install
your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure
the ventilation slots are not covered. Do not stack anything on top of the amplifier. In order to disconnect the player completely
from the power supply, remove the AC plug from the wall outlet, especially when left unused for a long period of time.

ENG

During thunderstorms, disconnect the AC plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.

Phones

Protect the player from moisture(i.e. vases), and excess
heat(e.g.fireplace) or equipment creating strong magnetic
or electric fields (i.e.speakers...). Disconnect the power
cable from the AC supply if the player malfunctions. Your
player is not intended for industrial use.

Use of this product is for personal use only.
Condensation may occur if your player or disc have been

stored in cold temperatures.
If transporting the player during the winter, wait

approximately 2 hours until the unit has reached room
temperature before using.

Do not expose the unit to direct sunlight or other heat
sources.

This could lead to overheating and malfunction of
the unit.

The batteries used with this product contain

chemicals that are harmful to the environment.

Do not dispose of batteries in the general household

trash.

3

HW-C700-C770S-C770BS-XAC_0616.in3 3HW-C700-C770S-C770BS-XAC_0616.in3 3 2010-06-17  10:06:562010-06-17  10:06:56

Features

Digital AV Receiver

This product is a pure digital AV receiver that performs digital
signal processing to minimize signal distortion and loss.

Dolby Pro Logic IIx

Dolby Pro Logic IIx is a new technology that provides
discrete 7.1 channels out of 2 channel or multi channel
sources.It also provides Music,Movie and Game modes.
Dolby Pro Logic IIx is an improved surround system that is
optimized to a 7.1 CH multimedia system, enabling you to
maximize your entertainment experience.

Dolby Pro Logic IIz

Dolby Pro Logic IIz adds front height channels to surround
sound, creating a 7.1 playback system for video games,
home music, and movies; bringing enhanced spatial effects
and enveloping sound.

DTS 96/24

DTS 96/24 encodes standard 16 bit/44.1 kHz sound to
24 bit/96kHz and applies it to a 5.1 CH sound track.

DOLBY DIGITAL EX

Adds a surround back channel for more spacious sound
compared to regular 5.1 channel Dolby Digital.

DTS (Digital Theater Systems)

DTS provides a discrete 5.1 CH digital audio signal for both
music and movie contents and uses less compression than
Dolby Digital for richer sound.

Dolby Digital Plus

Dolby Digital Plus is the next-generation audio technology
for all high-defi nition programming and media.

Dolby True-HD

Dolby True-HD is Dolby’s next-generation lossless
technology developed for high-defi nition disc-based media.

DTS-HD (Master Audio, High Resolution)
(Digital Theater Systems - High Defi nition)

DTS-HD Audio provides the highest quality multi-channel
sound possible.
It delivers sound quality that matches the clear and vivid
images of high-defi nition video.

DTS

Provides a full range of 6 channels by converting a digital PCM
or analog stereo signal using DTS digital matrix decoding.

iPod

You can enjoy music fi les by connecting your iPod/iPhone
to the AV Receiver with the supplied iPod dock.

SFE (Sound Field Effect) Using 32bit
Audio Digital Signal Processing

Provides more realistic surround sound with normal stereo
audio sources.

Anynet+ (HDMI-CEC) Function

Anynet+ is a function that can be used to operate this AV
Receiver with a Samsung TV remote control, by connecting
the receiver to a SAMSUNG TV using an HDMI Cable. (This
function is available only in connection with Samsung TV
and DVD player supporting Anynet+(HDMI-CEC).)

DTS-ES
(Extended Surround)

The DTS-ES (Extended Surround) system is a new multi
digital signal format that was developed by Digital Theater
Systems Inc.
Supporting full compatibility with the conventional DTS
digital surround sound format, the DTS-ES (Extended
Surround) system improves the surround signal for a 360­degree surround effect.
DTS-ES adds an additional rear center surround channel for

6.1 channel sound.

ACCESSORIES

INPUT SELECT

POWER

TV SOURCE

AMP/TV DIMMER

BD/DVD

123

456

SLEEPNEO : 6

7809

PROLOGIC AUDIO ASSIGN

DSP

MUTE

TUNING

VOL

/CH

ASC

TUNER MEMORY SUBWOOFER MO/ST

SETUP/MENU

INFO

RETURN

EXIT

TVBD/DVD SAT

CD

iPod

MULTI CH VCR / AUX

Remote Control/

Batteries (AAA size)

4

HW-C700-C770S-C770BS-XAC_0616.in4 4HW-C700-C770S-C770BS-XAC_0616.in4 4 2010-06-17  10:07:012010-06-17  10:07:01

FM antenna User’s manual iPod Dock ASC microphone

Contents

ENG

SAFETY INFORMATION

2

FEATURES

4

DESCRIPTION

7

CONNECTIONS

14

2 Safety Warnings
3 Precautions

● CONTENTS

4 Accessories

7 Front Panel
8 Rear Panel
10 Display
11 Insert Remote Control Batteries
11 Operation Range of the Remote Control
12 Tour of the Remote Control

14 Speaker Positioning
16 Connecting the Speakers
17 Connecting External Devices/Your TV via

HDMI
18 HDMI Function
19 Connecting to your TV
20 Connecting a DVD or BD(Blu-ray) Player
21 Connecting a Cable, Satellite or Set-top Box
22 Connecting a VCR
23 Connecting a CD Player
24 Connecting 7.1 Channel Devices
25 Connecting an iPod
27 Connecting the FM Antenna
27 Connecting Aux Components

BASIC FUNCTIONS OF YOUR AV

RECEIVER

28 Before Using the AV Receiver
28 Audio Setup
29 Selecting Digital/Analog Input

28

5

HW-C700-C770S-C770BS-XAC_0616.in5 5HW-C700-C770S-C770BS-XAC_0616.in5 5 2010-06-17  10:07:022010-06-17  10:07:02

Contents

SETUP

30

OPERATION

45

30 Setup Menu Tree
34 Setting the Speaker Size
35 Setting the Speaker Listening Distance
36 Setting the Speaker Level
37 Setting the Test Tone
38 Setting Dolby Pro Logic Mode
38 Setting Dolby Pro Logic IIx
39 Setting Dolby Pro Logic IIz
39 Setting Tone Control
40 Setting NEO:6 Mode
41 Setting EX/ES Mode
42 AV SYNC
42 MP3 Enhancer
42 Smart Volume
43 ASC (Auto Sound Calibration) Setup
44 DRC Setup
44 HDMI Setup
44 Variable Set

45 Using the Surround Modes
46 Using the Subwoofer Selection Button
47 Listening to the Radio
48 Using an iPod
50 Convenient Functions
51 Software Upgrade

MISCELLANEOUS

52 Operating Your TV With the Remote Control
54 Operating your DVD or BD player with the

remote control

52

TROUBLESHOOTING

55 Troubleshooting

55

APPENDIX

57 Specifi cations

57

6

HW-C700-C770S-C770BS-XAC_0616.in6 6HW-C700-C770S-C770BS-XAC_0616.in6 6 2010-06-17  10:07:022010-06-17  10:07:02

Description

FRONT PANEL

ENG

1 2 3

HEADPHONE JACK

1

2

AUX IN JACKS

ASC MIC JACK

3

DISPLAY

4

S.DIRECT/STEREO BUTTON

5

MULTI CH BUTTON

6

AV SYNC BUTTON

7

VOLUME CONTROL

8

POWER

9

INPUT SELECT BUTTON

10

AUDIO ASSIGN BUTTON

11

SOUND EFFECT BUTTON

12

SETUP BUTTON

13

UP(,), DOWN(.), LEFT(<),

14

RIGHT(>) BUTTONS

ENTER BUTTON

15

TONE CONTROL

16

ASC BUTTON

17

TUNING MODE BUTTON

18

SELECT BUTTON

19

MEMORY BUTTON

20

BUTTON

5 6 7

10 11 1412 13

Used to connect a set of headphones.

Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device.

Used to connect the ASC MIC for setting up ASC (Auto Sound Calibration).

Displays the speaker/audio input status, listening mode, etc.

Used to select the S.DIRECT or STEREO mode.

Used to select a connected 7.1 multi channel player.

Used to select the Audio Delay Mode.

Adjusts the volume level.

Turns the receiver on/off.

Used to select a source.
IPOD AUDIO  IPOD VIDEO).

Toggles to select an input mode for the selected source.

Toggles to select a surround sound mode.

Displays the SETUP menu.

Used to move the cursor up, down, left or right.

Also used to select detailed options in the SOUND EFFECT mode and to change the tone level.

Used to select an item in the SETUP menu.

Used to set the bass, treble level and tone to on/off.

Used to select the ASC (Auto Sound Calibration) mode.

Used to select the Manual or Preset mode for FM radio.

Used to change the radio frequency.

Used to set a preset radio frequency.

(FM  BD/DVD  SAT  TV  VCR CD  AUX  7.1 MULTI CH 

15 16 17

84 9

18 19 20

● DESCRIPTION

7

HW-C700-C770S-C770BS-XAC_0616.in7 7HW-C700-C770S-C770BS-XAC_0616.in7 7 2010-06-17  10:07:022010-06-17  10:07:02

Description

REAR PANEL

1 2 3 4 5

8 9 10 18 196 7

11 12 13 14

15 16 17

8

HW-C700-C770S-C770BS-XAC_0616.in8 8HW-C700-C770S-C770BS-XAC_0616.in8 8 2010-06-17  10:07:022010-06-17  10:07:02

ENG

FM ANTENNA JACK

1

MULTI CH IN JACKS

2

HDMI IN JACKS

3

HDMI OUT JACK

4

USB PORT

5

COMPONENT VIDEO IN JACKS

6

COMPONENT VIDEO OUT JACKS

7

iPod JACK

8

OPTICAL IN JACKS (DIGITAL AUDIO IN)

9

COAXIAL IN JACK (DIGITAL AUDIO IN)

10

VCR VIDEO IN JACK

11

VCR VIDEO OUT JACK

12

VIDEO IN JACKS

13

VIDEO OUT JACK

14

Connect the FM Antenna here.

Receives the analog audio signal from an external player with a multi-channel port.

Receives digital video and audio signals simultaneously using an HDMI cable.

Outputs digital video and audio signals simultaneously using an HDMI cable.

Can be only used for fi rmware upgrades.

Receives the component video signal.

Outputs the component video signal.

Receives the audio/video signal from an iPod.

Receives the digital optical audio signal.

Receives the digital coaxial audio signal.

Receives the video signal from a VCR.

Outputs the video signal to a VCR.

Receives the video signal from a video player (BD/DVD, SAT,TV).

Outputs the video signal to video devices (TV, Projector etc).

● DESCRIPTION

VCR AUDIO IN JACKS

15

VCR AUDIO OUT JACKS

16

AUDIO IN JACKS

17

SUBWOOFER AUDIO OUT JACKS

18

SPEAKER OUT TERMINALS

19

Receives the audio signal from a VCR.

Outputs the audio signal to a VCR.

Receives the audio signal from a video player (BD/DVD, SAT,TV, CD).

Connect the subwoofers.

Speaker connection terminals.

9

HW-C700-C770S-C770BS-XAC_0616.in9 9HW-C700-C770S-C770BS-XAC_0616.in9 9 2010-06-17  10:07:042010-06-17  10:07:04

Description

DISPLAY

1 2 3 4

5

67

SPEAKER INDICATORS

1

LISTENING MODE INDICATORS

2

TUNING INDICATORS

3

AUDIO INPUT INDICATORS

4

SPEAKER LEVEL INDICATOR

5

RADIO FREQUENCY INDICATORS

6

MESSAGE DISPLAY

7

Displays the connected speakers.

Displays the current listening mode.

Displays the status of the current radio broadcast.

Displays the audio input signal type of the currently connected external audio source.

Displays the speaker level.

Displays the current radio frequency range.

Informs you of the status of the receiver.

10

HW-C700-C770S-C770BS-XAC_0616.in10 10HW-C700-C770S-C770BS-XAC_0616.in10 10 2010-06-17  10:07:042010-06-17  10:07:04

INSERT REMOTE CONTROL BATTERIES

* Battery size: AAA

Follow these precautions to avoid leaking or cracking cells:

M

Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).



Assuming typical TV usage, the batteries last for about one year.



Use the correct type of batteries. Batteries that look similar may differ in voltage.



Always replace both batteries at the same time.



Do not expose the batteries to heat or a fl ame.



ENG

● DESCRIPTION

OPERATION RANGE OF THE REMOTE CONTROL

The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a
horizontal angle of up to 30° from the remote control sensor.

INPUT SELECT

POWER

TV SOURCE

AMP/TV DIMMER

BD/DVD

123

456

SLEEPNEO : 6

7809

PROLOGIC AUDIO ASSIGN

DSP

MUTE

TUNING

VOL

/CH

ASC

TUNER MEMORY SUBWOOFER MO/ST

SETUP/MENU

INFO

RETURN

EXIT

TVBD/DVD SAT

CD

iPod

MULTI CH VCR / AUX

11

HW-C700-C770S-C770BS-XAC_0616.in11 11HW-C700-C770S-C770BS-XAC_0616.in11 11 2010-06-17  10:07:042010-06-17  10:07:04

Description

TOUR OF THE REMOTE CONTROL

1

2

3

4

5

6

7

8

9

2

INPUT SELECT

TV SOURCE

BD/DVD

3

POWER

AMP/TV DIMMER

1

456

SLEEPNEO : 6

7809

PROLOGIC AUDIO ASSIGN

MUTE

VOL

ASC

DSP

TUNING

/CH

16
17

18

19

20

21

22

23

24

12

10
11

12

13

14

15

TUNER MEMORY SUBWOOFER MO/ST

SETUP/MENU

RETURN

MULTI CH VCR / AUX

INFO

EXIT

TVBD/DVD SAT

CD

iPod

25
26

27
28

29

HW-C700-C770S-C770BS-XAC_0616.in12 12HW-C700-C770S-C770BS-XAC_0616.in12 12 2010-06-17  10:07:052010-06-17  10:07:05

POWER BUTTON

1

AMP/TV BUTTON

2

NUMBER BUTTONS

3

Turns the receiver on/off.

Used to select the AMP/TV mode.

- If you select the AMP mode, the button will fl ash orange.

- If you select the TV mode, the button will fl ash green.

Used to select a TV channel.

ENG

NEO : 6 BUTTON

4

PROLOGIC BUTTON

5

SKIP BUTTONS

6

STOP/PLAY BUTTON

7

MUTE BUTTON

8

VOLUME CONTROL BUTTONS

9

SUBWOOFER BUTTON

10

TUNER MEMORY BUTTON

11

SETUP/MENU BUTTON

12

UP/DOWN/LEFT/RIGHT BUTTONS

13

RETURN BUTTON

14

FUNCTION SELECTOR

15

BUTTONS

INPUT SELECT,

16

TV SOURCE BUTTON

DIMMER BUTTON

17

BD/DVD BUTTON

18

SLEEP BUTTON

19

Select the desired NEO:6 mode.

Select the desired Dolby Pro Logic audio mode.

Press to skip backwards or forwards on a connected DVD/BD player or iPod.

Press to stop/start playback on a connected DVD/BD player or iPod.

Mutes the sound of a connected device.

Adjusts the volume of the selected device.

Used to select the Subwoofer.

Used to set a preset radio frequency.

Displays the SETUP menu.

Used to navigate the menus.

Used to return to the previous menu from the SETUP menu.

Used to select an input source.

Toggles to fi nd and select an input source.

Press to select a connected TV's video source.

Adjusts the brightness of the display.

Used to select the BD/DVD mode.

- If you select the BD mode, the button will fl ash orange.

- If you select the DVD mode, the button will fl ash green.

Used to set the Sleep Timer.

● DESCRIPTION

AUDIO ASSIGN BUTTON

20

DSP BUTTON

21

SEARCH BUTTON

22

PAUSE BUTTON

23

TUNING/CHANNEL BUTTONS

24

ASC BUTTON

25

MO/ST BUTTON

26

INFO BUTTON

27

ENTER BUTTON

28

EXIT BUTTON

29

Toggles to select an input mode for the selected source.

Used to select the SFE mode.

Press to search backwards or forwards.

Pauses playback on a connected device.

Used to change the radio broadcasting frequency or TV channel.

Used to set the Auto Sound Calibration function.

Select MONO or STEREO for radio broadcasts.

Display information on the connected device currently being used.

Used to select an item in the SETUP menu.

Exits the SETUP menu.

13

HW-C700-C770S-C770BS-XAC_0616.in13 13HW-C700-C770S-C770BS-XAC_0616.in13 13 2010-06-17  10:07:052010-06-17  10:07:05

Connections

This section involves various methods of connecting the AV receiver to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

SPEAKER POSITIONING

There are two methods for positioning the speakers.
When using Dolby Pro Logic IIz, place the Surround Back Speakers in the FHL, FHR position and connect them to
SURROUND BACK/ FRONT HEIGHT Jack.

* The HW-C700/C700B model does not supply speakers (sold separately).

FHL FHR

6.6~9.8 feet (2~3m)

AV

RECEIVER

SL

SBL

SBR

SR

SL SR

AV

RECEIVER

6.6~9.8 feet (2~3m)

L, R, C, SW, SL, SR, SBL, SBR ( Dolby Pro Logic IIx ) L, R, C, SW, SL, SR, FHL, FHR( Dolby Pro Logic IIz)

Position of AV Receiver

Place the AV Receiver on a dedicated stand or rack.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

Subwoofer function (HW-C770S/C770BS only)

Active subwoofer with integrated 150W amplifi er provides rich bass sound.

Connect the SW OUT terminal of the amplifi er to the INPUT

•

terminal of the subwoofer speaker.
Press the POWER button on the rear side of the subwoofer to

•

turn the power on.

•

Using the subwoofer’s VOLUME control, you can set the desired
bass level
(See page 36 "Setting the speaker level" to set the subwoofer level in
the menu).

Front Speakers

Place these speakers in front of your listening position, facing inwards (about 45°) toward you.

Place the speakers so that their tweeters will be at the same height as your ears.

Align the front face of the front speakers with the front face of the center speaker or place them slightly
in front of the center speaker.

14

HW-C700-C770S-C770BS-XAC_0616.in14 14HW-C700-C770S-C770BS-XAC_0616.in14 14 2010-06-17  10:07:052010-06-17  10:07:05

Center speaker

It is best to install it at the same height as the front speakers.

You can also install it directly over or under the TV.

ENG

Surround Speakers

Place these speakers behind your listening position.

If there isn't enough room, place these speakers so they face each other.

Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.

Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects
and sound will not come from them all the time.

Surround Back Speakers

If you are using two rear center speakers, place them behind the listening position.

Place the surround back speaker about 2.3-3.3 feet (70 cm to 1 m).

Front Height Speakers

When using Dolby Pro Logic IIz, place the Surround Back Speakers on the FHL, FHR position above the front L and front R speakers at
least 3.3 feet(1 m) above each one.

- Using the Surround Back Speakers as Front Height Speakers -

1.

Fasten 2 screws(not supplied) for each speaker on the wall
above the front L and R speakers.

2.

Install the Surround Back Speakers (L, R) by fi tting the holes
on the back the Surround Back Speakers to the screws on
the wall.

When you attach the speakers to the wall, make sure to fasten them tightly so they do not fall off.



M

FHL FHR

SBL SBR

When you

(Using Dolby Pro Logic IIz)

● CONNECTIONS

Speaker Confi guration

For the best surround-sound experience, you should connect seven speakers and a powered subwoofer.

The following table shows which channels you should use based on the number of speakers you have.

2 speakers 3 speakers 4 speakers 5 speakers 6 speakers

SBL SBL

No matter how many speakers you use, a powered subwoofer is recommended for powerful and solid bass.



M

If you place a speaker near your TV set, screen colour may be distorted because of the magnetic fi eld



generated by the speaker. If this occurs, place the speaker away from your TV set.

HW-C700-C770S-C770BS-XAC_0616.in15 15HW-C700-C770S-C770BS-XAC_0616.in15 15 2010-06-17  10:07:062010-06-17  10:07:06

7 speakers

(DPL IIx)

SBR

7 speakers

(DPL IIz)

FHL

FHR

15

Connections

CONNECTING THE SPEAKERS

FRONT (R)

PS-FC770S

ACTIVE SUBWOOFER

(BUILT-IN POWER AMPLIFIER)

PS-AW730

SURROUND (R)

SURROUND BACK (R)

PS-RC770S

PS-BC770S

SURROUND BACK (L)

CENTER

PS-CC770S

SURROUND (L)

PS-RC770S

FRONT (L)

PS-FC770S

PS-BC770S

Model HW-C700/C700B
AV Receiver HW-C700/C700B

Model HW-C770S/C770BS
AV Receiver HW-C770S/C770BS
FRONT SPEAKER PS-FC770S
CENTER SPEAKER PS-CC770S
SURROUND SPEAKER PS-RC770S
SURROUND BACK SPEAKER PS-BC770S
ACTIVE SUBWOOFER PS-AW730

16

One Active Subwoofer is provided, if you would like to use another, purchase it from the retailer where you bought



M

the player and connect it to the other SUBWOOFER OUT Jack.



When using Dolby Pro Logic IIz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT
HEIGHT Jack.

Connecting Speaker Wire

Loosen the knob by turning counterclockwise.

1.

Insert the bare part of the wire into the hole in the side of each

2.

terminal.

Tighten the knob by turning clockwise to secure the wire.

3.

Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects



M

into the duct (hole).



Never touch speaker terminals while the power is on. Doing so could result in electric shock.



Make sure the polarities (+ and -) are correct.

Connecting the Speakers

Press down the terminal tab on the back of the speaker.

1.

Insert the black wire into the black terminal (–) and the red wire into

2.

the red (+) terminal, and then release the tab.

Connect the connecting plugs to the back of the AV Receiver.

3.

Make sure the colors of the speaker terminals on the back of the

•

AV receiver match the colors of the connecting plugs.

Black

Red

HW-C700-C770S-C770BS-XAC_0616.in16 16HW-C700-C770S-C770BS-XAC_0616.in16 16 2010-06-17  10:07:092010-06-17  10:07:09

CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI

OPTICAL
OUT

HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top
box and more.

HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was
originally created in the digital source.

By connecting through the HDMI(High-Defi nition Multimedia Interface) interface, you can play back digital video and audio.

ENG

● CONNECTIONS

DVD or

Blu-ray Player

•

Connect it if you want
to use Anynet+.

SAT

(Cable/Satellite/Set-top box)

Game console

Camcorder
or
HDTV Tuner

(HDTV Terrestrial Receiver)

High-bandwidth Digital Content Protection System (HDCP) support

To play digital contents through the HDMI connection, both the connected external device and TV must
support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP.

Compatibility with a TV Supporting HDMI

A TV with an HDMI jack. Video/Audio

A TV with a DVI-D jack (TV supporting HDCP) Video

A TV with a DVI-D jack (TV not supporting HDCP) -

Audio from SACD discs will not be heard with this connection. To play a DVD disc whose copyright is protected



M

by CPPM, use a player supporting CPPM.
The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the



performance of the connected device.
Since HDMI connection supports both video and audio, you don’t have to connect an additional audio cable.



17

HW-C700-C770S-C770BS-XAC_0616.in17 17HW-C700-C770S-C770BS-XAC_0616.in17 17 2010-06-17  10:07:142010-06-17  10:07:14

Connections

HDMI FUNCTION

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's
remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an
HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support
Anynet+.

1.

Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17)

2.

Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.)

•

You can operate the volume on the AV receiver by using Volume buttons on the TV remote

control.

To turn on Anynet+

1.

Press the SETUP/MENU button.

•

Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.

2.

Press the ENTER button to select SETUP ENTER.

3.

Press the ▲▼ buttons to select HDMI SETUP, and then press the ENTER or ► button.

4.

Press the ▲▼ buttons to select HDMI ANYNET+, and then press the ENTER or ► button.

5.

Press the ▲▼ buttons to set ANYNET+ to ON.

- To exit setup mode-

•

Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.

If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using



M

the TV’s remote control. This function is available only in connection with Samsung TV and DVD player
supporting Anynet +(HDMI-CEC).

Please check your TV for the n logo. If your TV has an n logo, then it supports the Anynet+



function.

When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed).



Otherwise, it can cause a malfunction.

18

HW-C700-C770S-C770BS-XAC_0616.in18 18HW-C700-C770S-C770BS-XAC_0616.in18 18 2010-06-17  10:07:192010-06-17  10:07:19