Samsung C3560 Service Manual

GSM TELEPHONE
GT-C3560
GSM TELEPHONE
CONTENTS
Safety Precautions
1.
Specification
2.
Product Function
3.
Exploded View and Parts list
4.
MAIN Electrical Parts List
5.
Level1Repair
6.
Level2Repair
7.
Level3Repair
8.
Reference data
9.
Notice All functionality, features, specifications and other product information provided in this document inclu ding, but not limited to, the benefits, design, pricing, components, performance, availability, and capabiliti
es of the product are subject to change without
-
notice or obligation. Samsung reserves the right to make changes to this document and the product described herein, at anytime, without obligation on Samsung to provide notification of such change.
:
Safety Precautions
1.
Repair Precaution
1-1.
Repair in Shield Box, during detailed tuning. Take specially care of tuning or test, because
specipicty of cellular phone is sensitive for surrounding interference(RF noise).
Be careful to useakind of magnetic object or tool, because performance of parts is damaged by
the influence of magnetic force.
Surely useastandard screwdriver when you disassemble this product, otherwise screw will be
worn away.
Useathicken twisted wire when you measure level.
thicken twisted wire has low resistance, therefore error of measurement is few.
A
Repair after separate Test Pack and Set because for short danger(for example an overcurrent
and furious flames of parts etc) when you repair board in condition of connecting Test Pack and
tuning on.
Take specially care of soldering, because Land of PCB is small and weak in heat.
Surely tune on/off while using AC power plug, becausearepair of battery charger is dangerous
when tuning ON/OFF PBA and Connector after disassembling charger.
Don't use as you pleases after change other material than replacement registered on SEC System.
Otherwise engineer in charge isn't charged with problem that you don't keep this rules.
1-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Safety Precautions
ESD(Electrostatically Sensitive Devices) Precaution
1-2.
Several semiconductor may be damaged easily by static electricity. Such parts are called by ESD
Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below.
(
You can prevent from ESD damage by static electricity.
Remove static electricity remained your body before you touch semiconductor or parts with
semiconductor. There are ways that you touch an earthed place or wear static electricity prevention
string on wrist.
Use earthed soldering steel when you connect or disconnect ESD.
Use soldering removing tool to break static electricity.,otherwise ESD will be damaged by static
electricity.
Don't unpack until you set up ESD on product. Because most of ESD are packed by box and
aluminum plate to have conductive power,they are prevented from static electricity.
You must maintain electric contact between ESD and place due to be set up until ESD is
connected completely to the proper place oracircuit board.
1-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Specification
2.
GSM General Specification
2-1.
GSM 850 EGSM 900 DCS1800 PCS1900
Freq. Band[MHz]
Uplink/Downlink
ARFCN range 128~251 0~124 & 975~1023 512~885 512~810
Tx/Rx spacing 45MHz 45MHz 95MHz 80MHz
Mod. Bit rate/
Bit Period
Time Slot
Period/Frame
Period
Modulation 0.3GMSK 0.3GMSK 0.3GMSK 0.3GMSK
824~849 869~894
270.833kbps
3.692us
576.9us
4.615ms
880~915 925~960
270.833kbps
3.692us
576.9us
4.615ms
1710~1785 1805~1880
270.833kbps
3.692us
576.9us
4.615ms
1850~1910 1930~1990
270.833kbps
3.692us
576.9us
4.615ms
MS Power
Power Class
Sensitivity -102dBm -102dBm -100dBm -100dBm
TDMA Mux 8 8 8 8
Cell Radius 35Km 35Km 2Km 2Km
33dBm ~5dBm
4
(max +33dBm)
33dBm ~5dBm
4
(max +33dBm)
30dBm ~0dBm
1
(max +30dBm)
30dBm ~0dBm
1
(max +30dBm)
2-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Specification
GSM Tx Power Class
2-2.
TX Power
control level
5 32.5±2
631±2
729±2
827±2
925±2
10 23±2
11 21±2
GSM850 GSM900
dBm
dBm
dBm
dBm
dBm
dBm
dBm
TX Power
control level
0 29.5±3
128±3
226±3
324±3
422±3
520±3
618±3
DCS1800
dBm
dBm
dBm
dBm
dBm
dBm
dBm
TX Power
PCS1900
control level
0 29.5±3
128±3
226±3
324±3
422±3
520±3
618±3
dBm
dBm
dBm
dBm
dBm
dBm
dBm
12 19±2
13 17±2
14 15±2
15 13±2
16 11±3
17 9±3
18 7±3
19 5±3
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
716±3
814±3
912±4
10 10±4
11 8±4
12 6±4
13 4±4
14 2±5
15 0±5
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
716±3
814±3
912±4
10 10±4
11 8±4
12 6±4
13 4±4
14 2±5
15 0±5
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
2-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Product Function
3.
Main Function
EDGE, GPRS
Poly Melody
64
BT
2.1
USB
2.0
WAP2.0, JAVA
MMS/SMS
Camera:
LCD
:2.2"
Size:
94.8 * 46.7 * 16.59
Battery:
Memory:
Band: GSM
BB: Infineon CatFish X-Gold213
RF: Skyworks SKY77548
Speaker
1-
Mega Pixel, CMOS
2.0
TFT(LCD)
mAH
800
OneNand
1G
850/900/1800/1900
+ 512M
mm
DDR SDRAM
3-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
4.
Cellular phone Exploded View
4-1.
QFR01
QFU01
QCA01
QPC01
QME02
QLC01
QFL01
QAR01
QMO01
QMI03
QKP01
QCR92
QME01
QMP01
QSP01
QAN02
QIF01
QRE01
QMW01
QCR03
QSC01
QCR03
QBA01
QBC00
4-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
Cellular phone Parts list
4-2.
Design LOC Description SEC CODE
QAR01 AUDIO-RECEIVER
QCR03 SCREW-MACHINE
QCR03 SCREW-MACHINE
QCR92 SCREW-MACHINE
3009-001547
6001-001811
6001-001811
6001-002261
QMO01 MOTOR DC-SGH_P250 GH31-00454A
QBA01 INNER BATTERY PACK-800MAH,BLK,UNI,MAIN GH43-03241A
QME02 KEY FPCB-SUB KEY PBA(GT_C3560) GH59-10869A
QME01 DOME SHEET-MAIN(GT_C3560) GH59-10870A
QPC01 ASSY ETC-FPCB(GT-C3560) GH59-10876A
QSC01 TAPE-SCREW CAP GH74-54270A
QMP01 A/S ASSY-PBA MAIN(COMM)GT_C3560 GH82-05761A
QLC01 ELA MODULE-GT_C3560 LCD GH96-05069A
QCA01 ASSY CAMERA-MODULE,2M(GT_C3560) GH96-05110A
QFU01 ASSY CASE-FOLDER UPPER GH98-19417A
QFL01 ASSY CASE-FOLDER LOWER GH98-19418A
QMW01 ASSY CASE-MAIN WINDOW GH98-19421A
QBC00 ASSY COVER-BATTERY GH98-19423A
QKP01 ASSY KEYPAD-MAIN(RUSSIA) GH98-20174A
QFR01 ASSY CASE-FOLDER FRONT GH98-19419A
QMI03 ASSY RUBBER-MIC HOLDER GH98-20011A
QRE01 ASSY CASE-FOLDER REAR GH98-19420A
QAN02 INTENNA-MAIN(GT_C3560) GH42-02951A
QSP01 MODULE-SPEAKER(GT-C3560) GH59-10914A
QIF01 PMO COVER-IF GH72-62937A
4-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
MAIN Electrical Parts List
5.
Design LOC SEC CODE Description
ZD505
ZD403,ZD506
D402,ZD404
D400
ZD500,ZD501,ZD502
ZD503,ZD504
D401,ZD400,ZD401
ZD402,ZD507
LED500,LED501,LED502
LED503,LED504,LED505
U301
U100
PAM100
U402
U400
U200
U101
TH200
V500,V501
R404
R105
R307
R305
R516
R107,R306
R407
R406
R416,R417
R523
R211
R408,R410
R414,R415
R100,R101,R103,R500
R501,R503,R504,R507
R522
R106
0403-001741
0406-001286
0406-001413
0406-001431
0406-001446
0406-001446
0406-001459
0406-001459
0601-002652
0601-002652
1009-001036
1201-002944
1201-002985
1201-003111
1202-001036
1204-003112
1205-004116
1404-001224
1405-001298
2007-000138
2007-000143
2007-000148
2007-000153
2007-000157
2007-000162
2007-000166
2007-000169
2007-001298
2007-001341
2007-007142
2007-007156
2007-007798
2007-008045
2007-008045
2007-008045
2007-008047
TFZGTR5.6B
PESD5V0L5UV
PESD5V0F1BL
RCLAMP3655P.TCT
RD1301
RD1301
RD1301B
RD1301B
AOT-TAWE-XXLM
AOT-TAWE-XXLM
HED59XXU12
BGB707L7ESD
SKY77548
MAX97200AEWC-T
TC75W56FK-TE12L
PCS3PS550A
CSR8810A04-ICXR-R
NCP15XH103E04RC
LXES15AAA1-075
RC1005J101CS
RC1005J472CS
RC1005J103CS
RC1005J223CS
RC1005J473CS
RC1005J104CS
RC1005J304CS
TSR16GJ514V
RC1005J510CS
RC1005J684CS
RC1005F103CS
RC1005J1R0CS
RC1005F0100CS
ERJ1GEJ101C
ERJ1GEJ101C
ERJ1GEJ101C
RK73B1HTTB181J
5-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
Design LOC SEC CODE Description
R202,R203,R204,R515
R200
R213,R405
R205
R102,R514
R303,R304,R401,R403
R412
R210,R212,R214,R300
R301,R302,R418,R517
R518,R519,R520,R521
R104,R400
R207
R402,R411
R409
R508,R509,R510,R511
R512,R513
R201
C100,C101,C106,C120
C308
C520
C107
C413,C523
C227,C228
C126,C222,C225
C416
C109
C232
C218,C219
C108,C233
C102
C111
C123
C129,C202,C210
C112,C501,C505,C506
C507,C508,C509,C510
C511,C512,C513,C514
2007-008052
2007-008054
2007-008055
2007-008056
2007-008419
2007-008478
2007-008483
2007-008516
2007-008516
2007-008516
2007-008544
2007-008587
2007-009084
2007-009169
2007-009199
2007-009199
2007-009766
2203-000233
2203-000233
2203-000254
2203-000278
2203-000386
2203-000425
2203-000438
2203-000679
2203-000812
2203-002443
2203-002487
2203-002668
2203-005057
2203-005234
2203-005395
2203-005481
2203-005682
2203-005682
2203-005682
ERJ1GENJ472X
MCR006YZPJ682
ERJ1GENJ104X
RC0603J331CS
ERJ1GEJ102C
RMC1/20152JPA
RMC1/20473JPA
ERJ1GEJ103C
ERJ1GEJ103C
ERJ1GEJ103C
ERJ1GEJ681C
ERJ1GEJ561C
MCR006YZPJ105
MCR006MZPJ243
MCR006YZPJ360
MCR006YZPJ360
RC0603J5R1CS
GRP1555C1H101J
GRP1555C1H101J
GRP155R71C103K
GRP1555C1H100D
GRP1555C1H150J
GRP1555C1H180J
GRP155R71H102K
GRP1555C1H270J
GRP1555C1H330J
GRP155R71H331KD01E
CL05B472KA5NNNC
C1005CG1H0R5BT
GRP1555C1H8R2CZ01E
GRP1555C1H1R2CZ01E
C1005CG1H4R7BT
GRP155R71A473KA01E
GRP0335C1E330JD01E
GRP0335C1E330JD01E
GRP0335C1E330JD01E
5-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Design LOC SEC CODE Description
C515,C516,C522
C412
C401,C410
C117
C104,C115,C204,C205
C220,C224,C235,C236
C518
C125
C201,C209,C215,C237
C409
C116,C223
C213,C214,C302,C503
C504
C203,C206,C208,C240
C303,C304,C309,C405
C406,C500,C502
C200,C207,C216,C217
C239,C305,C310,C402
C403,C521
C226
C311
C212,C519
C118,C127
C128
C419,C420
C300,C301
C113,C114,C119,C230
C400
C238
C234
C306,C307,C404
C105,C221,C414,C517
C407,C408
C211
C411
C415
2203-005682
2203-005729
2203-005732
2203-005792
2203-006048
2203-006048
2203-006048
2203-006138
2203-006190
2203-006208
2203-006257
2203-006324
2203-006324
2203-006399
2203-006399
2203-006399
2203-006423
2203-006423
2203-006423
2203-006462
2203-006556
2203-006562
2203-006642
2203-006647
2203-006712
2203-006841
2203-006872
2203-006890
2203-007210
2203-007269
2203-007271
2203-007279
2203-007342
2203-007391
2203-007449
2203-007693
Main Electrical Parts List
GRP0335C1E330JD01E
CL03C150JAGC
GRP0335C1E680JD01E
CL03C1R5CA3GNNC
GRM155R71A104K
GRM155R71A104K
GRM155R71A104K
CL05C1R2BB5ANNC
GRM155R60J224KE01E
CM105X5R475M06AT
GRM155R60J474KE19E
GRM188R61A225KE19D
GRM188R61A225KE19D
GRM155R60J105KE19D
GRM155R60J105KE19D
GRM155R60J105KE19D
GRM33X5R104K6.3
GRM33X5R104K6.3
GRM33X5R104K6.3
GRM033R60J333K
GRM0335C1E470JD01D
CV05X5R105K10AH
GRM033R71E331KA01D
GRM033R60J473KE19D
GRM033R61A152K
CV05X5R105K16AH
GRM155R60J225ME15D
CV105X5R106M06AT
CV03X5R224K06AH
CL21A226MPCLRNC
CL05A225KP5NSNC
CV105X5R106M10AT
CV05X5R225M10AH
CL03A474KQ3NNNH
CV03X5R105M06AH-SAM
GRM188R61E225KA12D
5-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
Design LOC SEC CODE Description
C124
L119
L101
L110,L114
L107
L118
L100,L104
L102
L106,L109,L112,L115
L116
L111
L108
L117
L408
L201
OSC200
OSC201
F501,F503
F500,F502
F504
F101
MIC400
L300
L404,L405
L200
L400,L401,L402,L403
L406,L407
RFS100
CD500
SIM500
HEA500
BTC500
ANT100,ANT101
SPK400,SPK401
IFC400
2203-007754
2703-000213
2703-001613
2703-001734
2703-001747
2703-002176
2703-002199
2703-002204
2703-002208
2703-002208
2703-002308
2703-002367
2703-002369
2703-003781
2703-003869
2801-004902
2801-004931
2901-001422
2901-001435
2901-001454
2909-001337
3003-001138
3301-001342
3301-001812
3301-002000
3301-002065
3301-002065
3705-001731
3709-001575
3709-001645 5000-6
3711-006843 14-5802-044-002-829
3711-007393
3712-001348
3712-001361
3722-003115
CL05C010BBNC
LQM18NNR47K00
HK1005-18NK-T
LL1005-FH6N8J
LL1005-FH4N7S
CIH05T2N7SNC
CIH05T12NKNC
CIH05T22NJNC
CIH05T2N2SNC
CIH05T2N2SNC
CIH05T68NJNC
CIH05T1N0SNC
CIH05T1N5SNC
LMF1608TP-101K
LQM2HPN3R3MGCL
ST3215SB32768E0HPWBB
SQ2D02600B2HBG
ICVE10184E050R101FR
AVRC-14S-03Q-030-200R
AVRC-14S-03Q-030-050R
LCB10B2450K4
SPU0410LR5H-QB
ACZ1005M-152-T
BLM15HD102SN1
BLM15GA750SN1D
MMZ1005A182ET
MMZ1005A182ET
KMS-560-002-BEF
SCHA4B0301
P-1.5SB
KQ03SB2-3R
HJ-ICT-05Y
HJ-ICT-02Y
KQ20AX-7P-4D
SC100,SC101,SC102 GH70-03951A ONBOARD-CLIP-7
5-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
Design LOC SEC CODE Description
SC103,SC104,SC105 GH70-03951A ONBOARD-CLIP-7
U300
U202
U201
F100
EAR400
Please consult the GSPN website (Samsung Portal) for the most recent version of the product's part list.
1001-001706
1205-004215
1108-000406
2904-001987
3722-003262
MAX8985EWX-T
PMB8815-V1.0
K5W1G12ACP-BL500
DGLW75S02
IJAN4-121
5-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6.
Level
Repair
1
USB Cable:Because of supporting USB
1) he device manager of your PC may not recognize the cable that does not support USB
Battery:AB463446BU
2)
Diagram of connection
-
Data Cable
2.0
2.0.
cable,
Mobile Phone(with Battery)
Software Download
6-1.
6-1-1.
Pre-requisite for Download
Download Program
FlashTool_E2_XMM2150.ZIP:Version v.4.68.3.44
-
USB Driver
Samsung_USB_Driver_for_Mobile_Phones_1.3.1650.0.exe
-
GT-C3560 Mobile Device
Data Cable
JIG BOX(GH99-36900A)
RF Test Cable(GH39-00985A)
JIG Cable(GH39-01290A)
Adapter(GH99-38251A) Binary file
ActiveSync Setting
Driver Installation.
s
PC
6-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level1Repair
6-1-2.
6-1-3.
1)
-
Driver Installation
Make sure that you install the driver foraphone.
-
You have to install the driver of Samsung USB Modem of downloadingaphone image
-
Restart your host PC after you install the phone driver.
-
S/W Download Process
Execute the downloader
Execute the‘FlashTool_E2_XMM2150.zip\FlashTool_E2.exe’program
.
6-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Add binary file
2)
Level1Repair
-
Click
and you can select appropriate binary files.
"...",
These can be added via“Drag&Drop
Target Software
[
C3560**xxx_psi.fls(Type:Bootcore(PSI))
-
C3560**xxx_slb.fls(Type:Bootcore)
-
C3560**xxx_bin.fls(Type:Code)
-
C3560**xxx_cds.fls(Type:Code)
-
Resource File
[
C3560***xxx.dffs(Type:Cust)
-
]
]
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6-3
Level1Repair
a.Binary sequence should be set as
C3560**xxx_psi.fls
C3560***xxx.diffs
C3560**xxx_slb.fls
C3560**xxx_bin.fls
C3560**xxx_cds.fls
b. This can be done automatically if‘Customer Order’not chcked and check
c. Communication Driver shoud be set as Infineon USB Driver
d. Choose the‘Erase whole flash before download[default]
e. You can change quantity as"#Chnnels"(Max
8)
f. Click"NEXT" button
6-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Connect thedevice
3)
Level1Repair
a. Click"Start USB1" button.
b. Connet the target without battery via USB cable.
c. The download will start automatically
Complete download
6)
The download process is automatically executed.
-
.
a. If succeeds, you can see the right side image
6-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level1Repair
b. If"Failed" message was shown the right side image,
you should check and rearrange the order of
binary files after click"x" box on top right.
refer to2-a)
(
Confirm Download
7)
When completing download, downloader is automatically ready mode for next.
-
Click"Start USB1" button, and refeat above process.
You can check the version as pushing
-
[*#1234#]
after booting.
6-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level
7.
Disassembly and Assembly Instructions
7-1.
Repair
2
7-1-1.
1)
Disassembly
1 2
Be care of scratch and molding damage.
Unscrew4points
Caution
Separate Rear case6hooks
Caution
Be care of scratch and molding damage.
1)
3
Separate LCD connector, and keypad, PBA
ass'y
Caution
Be care of scratch and molding damage.
1)
Be care of damage to LCD FPCB.
)
2
Separate front using disassemble jig
4
Caution
Be care of scratch and molding damage.
1)
Be care of damage to LCD FPCB.
)
2
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level2Repair
7.
5
Separate screw cap and unscrew2points
Caution
Be care of scratch and molding damage.
1)
Separate upper front bottom to top
6
3
Caution
Be care of scratch and molding damage.
1)
Be care of damage to LCD FPCB.
)
2
2
1
7
Separate LCD connector and Camera
Caution
Be care of damage to LCD FPCB, Camera
1)
8
Separate LCD ass'y
Caution
Be care of scratch and molding damage.
1)
Be care of damage to LCD FPCB.
)
2
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...
+ 47 hidden pages