Level
7.
Disassembly and assembly Instructions
7-1.
Repair
2
7-1-1.
1
Disassembly
Unscrew6points at the REAR case
2
DIsassemble the REAR as from upper side
Be careful not to make scratch and molding damage!
1)
3-1
Separate MIC, FPCB connector.
Be careful not to make scratch and molding damage!
1)
isassemble PBA, Keypad from folder ass'y
D
4
Be careful not to make scratch and molding damage!
1)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Be careful not to make scratch and molding damage!
1)
7-1
Level2Repair
7.
5
While pressing Hinge,
Separate FRONT from LOWER
Be careful not to make scratch and molding damage!
1)
Be careful not to damage LCD FPCB and LCD
3)
.
Tear off screw cap and unscrew2point.
6
Be careful not to make scratch and molding damage!
1)
7
Be careful not to make scratch and molding damage!
1)
isassemble LOWER from upper side.
D
8
eparate LCD connector, Motor, Receiver
S
FPCB connector.
Be careful not to make scratch and molding damage!
1)
careful not to damage Receiver FPCB
2) Be
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
9
isassemble CTC FPCB,Receiver from Upper
D
ass'y
Level2Repair
7.
Be careful not to make scratch and molding damage!
1)
Be careful not to damage Receiver FPCB
2)
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization