Samsung BN68-04501A-00, BN68-04501A User Manual

LED TV

quick start guide

1. Accessories and Cables

Accessories

The following accessories are included with your TV:

• Remote Control (AA59-00600A) & Batteries (AAA x 2)

• Warranty Card / Safety Guide

• Owner’s Guide

• Quick Start Guide

• Wire-Holder Stand (BN61-05491A)

• Power Cord

Input Cables (Sold Separately)

You will need one or more of theses cables to connect your TV to your antenna or cable outlet and your peripheral devices (Blu-ray players, DVD players, etc.)

• Audio

• HDMI

• HDMI-DVI

✎ Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are below.

• Component

• Composite (AV)

• Coaxial (RF)

Cable Plugs Ports/Jacks

HDMI

USB

Optical

Do not plug a cable in upside down.

Make sure the orientation of the plug is correct before plugging it in.

BN68-04501A-00

2. Getting Started

Provide Ventilation for Your TV

When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or a problem with the product

caused by an increase in its internal temperature.

✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x Using par ts provided by another manufacturer may cause dif ficulties with the product or result in injury caused

by the product falling.

✎ Be careful when you contact the T V because some parts can be somewhat hot.

Installation with a stand. Installation with a wall-mount.

4inches

Installing Batteries into the Remote (Battery size: AAA)

Match the polarity of the batteries to the symbols in the batter compartment

✎ NOTE

x Use the remote control within 23 feet of the T V. x Bright light may affect the performance of the remote control. Avoid use when near fluorescent lights or neon

signs.

x The color and shape of the remote may vary depending on the model.

4inches

3. Making Connections

Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the power cord to the TV, and then connect the power cord to an AC wall outlet. If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.

y For the best picture and audio quality, connect digital devices

using an HDMI cable.

y If you connect an external device to the TV that uses an older

version of HDMI, the video and audio may not work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade.

y Be sure to purchase a certiﬁed HDMI cable. Otherwise, the

picture may not display or a connection error may occur.

AV Device (1)

Using an HDMI Cable (up to 1080p)

HDMI OUT

Blu-ray player / DVD /

TV Side Panel

cable box / sat box

DVI OUT

HDMI OUT

Using an HDMI Cable or an HDMI to DVI Cable. Use the PC speakers for audio.

y PC/DVI AUDIO IN input is not supported.

y For an HDMI to DVI cable connection, you must use the HDMI

IN 1(DVI) jack.

y For PCs with DVI video out jacks, use an HDMI to DVI cable to

connect the DVI out on the PC to the HDMI IN 1 jack on the TV. Use the PC's speakers for audio.

y EX-LINK: Connector for service only.

y The side panel may differ depending on the model.

Power Input

TV Rear Panel

Audio Device (1)

Using an Audio (Analog) Cable

R W

AUDIO IN

R-AUDIO-L

DVD / Home Theater

VHF/UHF Antenna

Media Play

Using a USB Drive

R W RY

W YR

AV Device (2)

Using Audio/Video Cables

AUDIO OUT

VIDEO OUT OPTICAL

R-AUDIO-L

VCR Blu-ray player

R W R B RG

W R BR

AV Device (3)

Using a Component Cable (up to 1080p)

AUDIO OUT

COMPONENT OUT

R-AUDIO-L

PR PB Y

ANT OUT

Cable

Audio Device (2)

Using an Optical (Digital) Cable

Digital Audio System

+ 5 hidden pages