Disassembly and Assembly Instructions
7.
Disassembly
7-1.
1
Release SCREW4POINT at Rear.
1)
Caution
※
Be careful not to make scratch
1)
2
①
②
③
Disjoint HOOK from up to down.
1)
Caution
※
Be careful Hook damage when you Disjoint
1)
.
REAR.
a
IF COVER
HOOK
Seperate the IF COVER front FRONT.
1)
2M
카메라
43
Disjoint LCD CONNECTOR.
1)
Separate PBA from FRONT.
2)
LCD
CONNECT
OR
PBA
HOOK
POINT
2
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5
Put tweezers to Front hole and Press
1)
downaHinge.
Separate FRONTand FOLDER ASS'Y during
2)
doing NO.1.
Caution
※
1) Beware that you do not damage LCD F-PCB.
2) Be caredful that you do not make scratch when
you press down a Hinge.
6
SCREW
POINT
2
Remove SCREW CAP using tweezers.(2POINT)
1)
Release SCREW.
2)
Caution
※
1) Be careful not to make scratch and molding damage!
Seperate UPPER from LOWER.
1)
ReleaseaHOOK which locate upside first.
Caution
※
1) Be careful Hook damage when you disjoint a UPPER.
87
SPEAKER
Sperate MOTOR from the LOWER
1)
Sperate SPEAKER from the LOWER
2)
MOTOR
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
9
LCD F-
PCB
SeperateaFolder LOWER and LCD MODULE.
1)
Caution
※
Exploded View and Parts List
Beware that you do not damage LCD F-PCB.
1)
Beware that you do not damage F-PCB
2)
when you passing F-PCB to hole of LOWER
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
Assembly
7-2.
1
Put LCD F-PCB into the hole of LOWER.
1)
Put LCD Ass'y in Folder Lower.
2)
Caution
※
Be careful not to make scratch and molding
1)
damage
Beware that you do not damage F-PCB
2)
when you insert F-PCB to hole of LOWER
.
2
Put the SPEAKER on the UPPER
1)
Caution
※
Arrange WIRE not to be interfered
1)
with other components.
Twist the MOTOR wire twice, then put
1)
into the LOWER
Caution
※
Arrange WIRE not to be interfered
1)
with other components.
Twiste twice
43
Assemble Folder Lower and Folder Upper
1)
from upside.
Caution
※
Be careful not to make scratch and molding
1)
damage
Check GAP is exist after finish assembly.
2)
.
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5
SCREW2point
Screw up two screws at FOLDER LOWER.
1)
Put in screw caps.
2)
Caution
※
Be careful not to make scratch and molding
1)
damage!
6
Insert F-PCB to hole of FRONT.
1)
Assemble while pressing the hinge.
2)
Caution
※
Beware that you do not damage F-PCB
1)
when you insert F-PCB to hole of FRONT
Open and closeafolder
2)
Check there isaproblem or not.
2~3
times to
Set KEYPAD on the FRONT.
1)
Caution
※
Check the KEYPAD's guide hole.
1)
87
LCD
CONNECT
OR
HOOK
2
SetaPBA.
1)
Connect RF CONNECTOR.
2)
Caution
※
Be careful not to make scratch and molding
1)
damage!
PBA
POINT
7-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
9
IF COVER
HOOK
Set the IF COVER on the FRONT.
1)
2M
카메라
10
①
②
③
Assemble REAR and FRONT ass'y from upside.
1)
Caution
※
Be careful not to make scratch and molding
1)
damage!
Check GAP is exist after finish assembly.
2)
11
1)Attach lower screw sheet.
Caution
※
Be careful not to make scratch and molding
1)
damage!
7-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...