Samsung b25, S25, B24, S26, S27 Reference Information
...
Read all instructions before using this product and keep to the instructions
in order to prevent danger or property damage.
2. SAFETY WARNINGS
2
CAUTION/WARNING SYMBOLS DISPLAYED
SYMBOLS
Indicates that a
danger of death
or serious injury
exists.
Indicates that a risk
of personal injury
or material damage
exists.
means ÒProhibitionÓ.
means ÒDo not disassembleÓ.
means ÒNo contactÓ.
means ÓThe things to
be followedÓ.
means ÒEarth to prevent Electric
shockÓ.
means ÒPower cord should be
unplugged from the consentÓ
Do not insert the power plugs
for many products at the
same time.
May cause abnormal
generation of heat or fire.
Do not disassemble,
repair or alter.
It may cause fire or abnormal
operation which leads to injury.
Do not bend the power cord
with excessive force or do not
have the power cord pressed
by heavy article.
May cause fire.
Do not install the refrigerator
in the wet place or the place
which water splashes.
Deterioration of insulation of electric
parts may cause electric shock or fire.
Be sure the earth.
If earthing is not done, it will cause
breakdown and electric shock.
(please refer to page 6).
Pull the power plug out for
exchanging the interior lamp
of the refrigerator.
It may cause electric shock.
Warning
Warning
Caution
Prohibition
Do not
disassemble
Earth
Unplug
3
Do not put bottles or kinds of
glass in the freezer.
Freezing of the contents may inflict
a wound.
Do not store narrow and
lengthy bottles or foods in a
small multi-purpose room.
It may hurt you when refrigerator door
is opened and closed resulting in falling
stuff down.
Do not store pharmaceutical
products, scientific materials,
etc., in the refrigerator.
The products which temperature control
shall not be stored in the refrigerator.
Do not store articles on the
product.
Opening or closing of the door may
cause throwing down which may
inflict a wound.
Use the rated components
on the replacement.
Check the correct model, rated
voltage, rated current, operating
temperature and so on.
On repair, make sure that the
wires such as harness are
bundled tightly.
Bundle tightly wires in order not to
be detached by the external force and
then not to be wetted.
Check if there is any trace
indicating the permeation
of water.
If there is that kind of trace, change
the related components or do the
necessary treatment
such as taping
using the
insulating tape.
After repair, check the
assembled state of
components.
It must be in the same assembled
state when compared with the state
before disassembly.
On repair, remove completely
dust or other things of
housing parts, harness parts,
and check parts.
Cleaning may prevent the possible
fire by tracking or short.
Caution
Prohibition
Prohibition
Prohibition
Prohibition
Rated
components
Loading...