Samsung AW2490L User Manual

DB98-08499A(1)
AW2490L
Window-type Room Air Conditioner
(Cool)
ES
OWNER’S INSTRUCTIONS
E-2
Safety Precautions
1 The air conditioner must be plugged into its own specific power source, which must be
installed in compliance with national wiring, earthing and safety regulations.
Depending on national regulations and your specific installation, you may need to install:
A circuit breaker
For further information on electrical requirements, contact a professional electrician.
This device must be installed according to the national electrical rules.
2 Make sure that the unit is correctly ventilated at all times;
do NOT place clothing or other materials over it.
4 Do NOT insert anything between the air outlet blades, as it may damage the inner fan
and you may be hurt. Keep children away from the unit.
5 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
6 Do NOT attempt to repair the unit yourself. If it is damaged in any way, contact:
An authorized service center
The dealer from whom you purchased the air conditioner.
7 Do NOT place any blocking objects in front of the unit.
3 NEVER spill liquids of any kind into the unit.
Should this happen, unplug the unit and contact your installation specialist.
8 If the remote control will not be used for a long time, remove the batteries.
9 Before throwing out the device, it is necessary to pull back the battery cells
and get rid of them safely.
10 The appliance is not intended for use by young children or infirm person without supervision;
young children should be supervised to ensure that they do not play with the appliance.
11 Do NOT use an extension cord with this product.
The manufacturer does not assume responsibility for accidents or injury caused by an incorrectly installed air conditioner. If you are unsure about installation, contact an installation specialist.
CCCCAAAAUUUUTTTTIIIIOOOONN
NN
E-3
Contents
PREPARING
YOUR AIR CONDITIONER
Safety Precautions ......................................................................................... 2
Description of Each Component .................................................................... 4
Remote Control - Buttons and display............................................................ 5
Getting Started ............................................................................................... 6
Inserting the Remote Control Batteries .......................................................... 7
UU
UU
SSSSIIIINNNNGGGGTTTTHHHHEEEECCCCOOOONNNNTTTTRRRROOOOLLLLPPPPAAAANNNNEEEELLLLOOOONNNNTTTTHHHHEEEEUUUUNNNNIIIITT
TT
OPERATING YOUR AIR CONDITIONER
Cooling Your Room ........................................................................................ 9
Ventilating Your Room .................................................................................... 10
Removing Excess Humidity ............................................................................ 11
PROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer ...................................................................................... 12
Setting the Off Timer ...................................................................................... 13
Setting the Sleep Timer .................................................................................. 14
Selecting Energy Saving mode ...................................................................... 15
UU
UU
SSSSIIIINNNNGGGGTTTTHHHHEEEEWWWWIIIIRRRREEEELLLLEEEESSSSSSSSRRRREEEEMMMMOOOOTTTTEEEECCCCOOOONNNNTTTTRRRROOOOLL
LL
OPERATING YOUR AIR CONDITIONER
Cooling Your Room ........................................................................................ 17
Ventilating Your Room .................................................................................... 18
Removing Excess Humidity ............................................................................ 19
PROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer ...................................................................................... 20
Setting the Off Timer ...................................................................................... 21
Setting the Sleep Timer .................................................................................. 22
Selecting Energy Saving mode ...................................................................... 23
Adjusting the Air Flow Direction Horizontally .................................................. 24
Adjusting the Air Flow Direction Vertically ...................................................... 24
RECOMMENDATIONS FOR USE
Temperature and Humidity Ranges ................................................................ 25
Cleaning Your Air Conditioner ........................................................................ 26
Solving Common Problems ............................................................................ 27
Technical Specifications ................................................................................. 27
E-4
Description of Each Component
Air outlet
Air filter (inside)
Air inlet (Inside)
Air inlet (Outside) Air outlet
Inner air flow blades (right/left orientation)
Outer air flow blades (up/down orientation)
Ventilation lever
Power plug (The type of power plug
may differ, depending on the local power supply.)
Temperature/Timer settings
Temperature adjustment buttons
Fan speed
adjustment button
Air flow blade
swing button
Energy Saver
indicator
Sleep timer setting button
Remote control sensor
Timer indicator
Energy Saver
button
On/Off button
Mode selection button (Cool, Fan, Dry)
Timer setting
button
E-5
Remote Control - Buttons and display
Operating mode
( Cool, Dry, Fan)
Remote control
transmission indicator
Mode selection button
(Cool, Fan, Dry)
Sleep timer setting button
Energy Saving button Timer setting button
Timer Set/Cancel button
On/Off button
Fan speed adjustment button
Temperature adjustment buttons
Temperature setting
Sleep mode
Energy Saving mode
Fan speed
Air flow direction
On Timer setting Off Timer setting
Battery discharge indicator
Air flow blade swing button
E-6
Getting Started
IMPORTANT NOTE
You have just purchased a Samsung window-type room air conditioner which should be installed following your installation manual.
Your Owner’s Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s features.
The booklet is organized as follows.
The following figures are shown on pages 4 and 5:
- Description of Each Component
- Remote control (buttons & display)
They will help you find the buttons and understand the symbols displayed.
In the manual, you will find a series of step-by-step procedures for each function
available.
The illustrations in the step-by-step procedures use four different symbols:
PRESS PUSH
E-7
Inserting the Remote Control Batteries
Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
+ on the battery with + on the remote control.
- on the battery with - on the remote control.
1
2
Close the cover by sliding it back until it clicks into place.
3
Use two AAA, LR03 1.5V batteries.
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even
if they have not actually been used.
You must insert or replace the remote control batteries when :
You purchase the air conditioner
The remote control does not work correctly
E-8
This chapter indicates how to operate and program your air conditioner with the control panel on the unit.
UU
UUssssiiiinnnngggg tttthhhheeee
CC
CCoooonnnnttttrrrroooollll
PP
PPaaaannnneeeellll
oooonnnn tttthhhheeee UU
UUnnnniiiitttt
E-9
Cooling Your Room
To adjust the temperature, press the or buttons on the remote control or unit one or more times until the desired temperature is displayed.
The temperature can be set between 64°F and 86°F. Result
:◆ Each time you press the or buttons:
– The temperature is adjusted by 1°F and displayed on
the control panel
– The unit beeps
The air conditioner starts cooling, if the room temperature is higher than the selected temperature.
If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating.
3
Press the (On/Off) button. Result:
The air conditioner starts up in the mode selected when the unit was last used.
The unit beeps twice.
The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Plugged in
Stopped
It will start up normally after three minutes.
If the temperature is not displayed on the control panel:
Press the button on the unit one or more times until the temperature is displayed.
Result
:◆ The unit beeps each time you press the button.
The air conditioner starts up in the Cool mode.
You can change modes at any time.
You must select the Cool mode if you wish to lower the temperature in your room. You can also set the Fan speed.
1
2
To set the fan speed:
Press the button on the unit one or more times until the desired Fan speed(F1, F2 or F3) is displayed.
Low Medium High
4
To control the direction of the air flow, refer to page 24.
5
Loading...
+ 19 hidden pages