Samsung AW24PKHEA, AW18PKHEA, AW09PKHEA/AFR, AW07PHHEA User Manual [en, kk]

DB98-20384A(3)E S F P I
OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION MANUAL DE INSTRUÇÕES ISTRUZIONI PER L'USO
ENGLISH
FRANÇAIS
PORTUGUÊS
ITALIANO
Window-type Room Air Conditioner (Cool)
Acondicionador de airea doméstico sistema de tipo ventana (Reirigeración)
Climatiseur de type Fenêtre (Refroidissement)
O ar Condicionado de Window-Type (Refrigeracçã)
Condizionatore d'aria per ambienti da finestra (Raffreddamento)
AW07PHHBA AW07PH(K)HEA AW09PHHAA AW09PHHBA AW09PHHDA AW09PH(K)HEA
AW14PHHBA AW18PH(K)HEA AW18PHHBA AWT18PH(K)HEA/EB
AWT24PH(K)HEA/EB/EC
AW12PHHAA AW12PHHBA AW12PHHDA AW12PH(K)HEA AWT12PHHBA AWT12PHHEA
AW24PHHBA/BB/BC/BD AW24PH(K)HEA/EB
E-2

Safety Precautions

The following safety precautions must be taken when using your air conditioner.
Users of this product are cautioned not to attempt repair of this product at their own
discretion. Instead, they are requested to directly contact a designated
service
center or the outlet at which the product was purchased.
Never spill any kind of liquid into the unit. Should this happen, unplug or main switch
off the unit and contact an authorized service center.
Do not insert anything between the air outlet blades because the inner fan may be
damaged and could cause injury. Keep children away from the unit.
Do not place any obstacles in front of the unit.
Do not spray liquid of any kind into the indoor unit. Should this happen, switch off the
breaker used for your air conditioner and contact your installation specialist. Make sure that the unit is correctly ventilated at all times: Do
not place clothing or other materials over it.
If the wireless remote control will not be used for a long time, remove the batteries.
(If applicable)
When using a wireless remote control, the distance should not be more than 7 meters
from the air conditioner. (If applicable)
WARNING
DURING OPERATION
Risk of electric shock. Can cause injury or death. Disconnect all remote
electric power supplies before servicing, installing or cleaning.
This must be done by the manufacturer or its service agent or a similar qualified
person in order to avoid a hazard.
Register your product at www.samsung.com/global/register
D
ISPOSING OF THE UNIT
OTHERS
The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring,earthing and safety regulations.
If the power cord is damaged in any way, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
This device must be installed according to the national electrical rules.
The appliance must be installation that the plug should be easily accessible after installation.
If the fuse on PC board is broken please change it with the type of T 3.15A 250V.
The breaker of the air conditioner should be all-pole switch; and the distance between its two contacts should be no less than 3.5mm. Such means for disconnection must be incorporation in the fixed wiring.
Before throwing out the device, it is necessary to pull back the battery cells and get
rid of them safely for recycling reasons.
When you need to dispose of the unit, consult your dealer. If pipes are removed incorrectl injur
Please recycle or dispose of the packaging material for this product in an environmentally
Never store or ship the air conditioner upside down or sideways to avoid damage to
The appliance is not intended for use by young children or infirm persons without supervision: with
Max current is measured according to IEC standard for safety and current is measured
y, refrigerant may blow out and come into contact with your skin,causing
y. Releasing refrigerant into the atmosphere also damages the environments.
responsible manner.
the compressor.
Young children should be supervised to ensure that they do not play
the appliance.
according to ISO standard for energy efficiency.
E-3
Contents
PREPARING YOUR AIR CONDITIONER
Safety Precautions Air Conditioning Unit-Main
Parts, Buttons and Display
Remote Control-Button
s Getting Started Inse
rting the Remote Control Batteries
Cooling Your Room Airing Your Room
Adjusting the Air Fl
ow Direction Horizontally
Adjusting thr Air Fl
ow Direction Vertically
OPERATING YOUR AIR CONDITIONER
Setting the On Timer Setting the O
ff Timer
Setting the Sleep
Timer
Selecting Energy s
aving mode
PROGRAMMING YOUR AIR CONDITIONER
Temperature and Humidity Ranges Cleaning Your Air Conditioner Solving Common Pro
blems
Technical Specifications
RECOMMENDATIONS FOR USE
INSTALLSTION
2 4 5 6 7
8 9
11 11
12 13 14 15
15 16 17 18
19
HSILGNE
Removing Excess Humidity ............................................................................ 10
CCCCAAAAUUUUTTTTIIIIOOOONN
"The high in the ope does not comply with the rel fluctuations and flick Be
fore connection this equipment to the power supply system, please report to your suply autho Do not connect other elect
AW18
The maxi Usuall branch to the power outlet is fed from a junction box with a rated current of 32A.
NN
rush current of the starting compressor motor can have adverse effects to
ration of other equipment under unfavorable mains conditions. This equipment
evant technical standards for the limitation of voltage
er."
rity and obtain the consent.
ric appliances to the same supply lines.
**
mum permissible system impedance at the power junction box is 0.24 ohms.
y, the maximum permissible mains impedance will not be exceeded when the
E-4

Air Conditioning Unit - Main Parts, Buttons and Display

The design and shape are subject to change according to the model.
Air inlet (Inside)
Ventilation lever
Air inlet (Outside)
Outer air flow blades (up/down orientation)
Inner air flow blades (right/left orientation)
Temperature/
Timer settings
Temperature adjustment
buttons
Energy Saver indicator
Remote Control sensor
Air flow blade
swing button
Fan speed adjustment
button
On/Off button
Operating mode indicators (COOL, DRY,FAN)
Sleep timer setting button
Timer setting button
Timer indicator
Sleep indicator
Energy Saver button
Operating mode selection button (COOL,DRY, FAN)
Power plug
The type of the power plug may differ according to the type of local power supply.
The power plug may be not supplied depending on the model.
The air filter is
located in side
Air Outlet
E-5

Remote Control - Buttons

Timer setting button
Sleep timer setting
button
Ope
rating mode
selection
buttons
Air fl
ow blade swing button
Energy S
aver button
Temperature adjustment buttons
Fan speed adjustment buttons
On/O
ff button
HSILGNE
E-6
Gray background. Example:
White background. Example:

Getting Started

You have just purchased a window-type room air conditioner and it has been installed by your installation specialist.
Y
our Owenr's Instructions contain valuable information on using your air conditioner.
Please take the time to read them as they will help you take full advantage of the unit's functions.
This Owner's Instructions is just for using your air conditioner correctly. Thus, the illustrations shown in this manual may not exactly match your air conditioners.
The booklet is organized as follows.
The following figures are shown on pages 4 and 5:
Air conditioning unit (main parts, buttons and display) Remote control (buttons)
They will help you find the buttons and understand the symbols displayed.
In the manual, you will find a series of step-by-step procedures for each function available.
The illustrations in the step-by-step procedures use four dif
ferent symbols:
Moreover,applicable, wherever the illustrations show the positions of the buttons on both the remote control and the unit itself.
For the...
The illustrations have a...
Remote control
Unit itself
E-7

Inserting the Remote Control Batteries

You must insert or replace the remote control batteries when:
You purchase the air conditioner The remote control does not work correctly
Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even if they have not actually been used.
1 Push the battery cover on the rear of the remote control with your thumb in
the direction of the arrow and remove it.
2 Insert the two batteries,taking care to respect the polarities:
+ on the battery with + on the remote control
- on the battery with - on the remote control
3 Close the cover by sliding it back unitl it clicks into place.
You can control all the functions your air conditioning unit directly from your seat, using the remote control.
Result:
ENGLISH
Loading...
+ 15 hidden pages