Samsung AW09A0KE User Manual

OWNER’S INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’UTILISATION

MANUAL DE INSTRUÇÕES

ISTRUZIONI PER L’USO

AW07F0(1)(3)NAA/AB/BA/CA/DA/EA	AW07A(G)0(1)(3)NAA/AB/BA/CA/DA/EA
AW08F0(1)(3)NAA	AW08A(G)0(1)(3)NAA
AW09F0(1)(3)NAA/BA/CA/DA/EA	AW09A(G)0(1)(3)NAA/BA/CA/DA/EA
AW10F0(1)(3)DAA/BA/CA	AW10A(G)0(1)(3)DAA/BA/CA
AW12F0(1)(3)DAA/BA/CA/DA/EA	AW12A(G)0(1)(3)DAA/BA/CA/DA/EA
AW14F0(1)(3)MAA/AB/BA/CA/DA/EA	AW14A(G)0(1)(3)MAA/AB/BA/CA/DA/EA
AW18F0(1)(3)MBA/BB/BC/DA/EA/EB	AW18A(G)0(1)(3)MBA/BB/BC/DA/EA/EB
AW18F0(1)(3)MCA/CB/CC	AW18A(G)0(1)(3)MCA/CB/CC
AWT18F0(1)(3)MBA/BB/DA/EA/EB	AWT18A(G)0(1)(3)MBA/BB/DA/EA/EB
AW22F0(1)(3)MBA/CA/DA/EA	AW22A(G)0(1)(3)MBA/CA/DA/EA
AW22F0(1)(3)MBB/CB/DB/EB	AW22A(G)0(1)(3)MBB/CB/DB/EB
AW24F0(1)(3)MBA/CA/CB/CC/CD/DA/EA	AW24A(G)0(1)(3)MBA/CA/CB/CC/CD/DA/EA
AW24F0(1)(3)MBB/BC/BD/EB	AW24A(G)0(1)(3)MBB/BC/BD/EB
AWT24F0(1)(3)MBA/CA/DA/EA	AWT24A(G)0(1)(3)MBA/CA/DA/EA
AWT24F0(1)(3)MBB/BC/EB/EC	AWT24A(G)0(1)(3)MBB/BC/EB/EC

Window-type Room Air Conditioner (Cool) Acondicionador de aire doméstico sistema de tipo ventana (Refrigeración)

Climatiseur de type Fenêtre (Refroidissement)

O ar Condicionado de Window-Type (Refrigeração) Condizionatore d’aria per ambienti da finestra (Raffreddamento)

ITALIANO PORTUGUÊS FRANÇAIS ESPAÑOL ENGLISH

E S F P I DB98-04664A(4)

Safety Precautions

The following safety precautions must be taken when installing and using your air conditioner.

1 The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring, earthing and safety regulations.

Depending on national regulations and your specific installation, you may need to install:

A circuit breaker

For further information on electrical requirements, contact a professional electrician.

This device must be installed according to the national electrical rules.

2 Make sure that the unit is correctly ventilated at all times; do NOT place clothing or other materials over it.

3 NEVER spill liquid of any kind into the unit.

Should this happen, unplug the unit and contact your installation specialist.

4Do NOT insert anything between the air outlet blades, as the inner fan may be damaged and you may be hurt. Keep children away from the unit.

5ALWAYS ensure that the power cable is in good condition.

Make sure that it is not walked on or damaged by items placed on or against it.

If the power cord is damaged in any way, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

6Do NOT attempt to repair the unit yourself. If it is damaged in any way, contact:

An approved service center

The outlet at which the air conditioner was purchased

7Do NOT place any obstacles in front of the unit.

8The appliance is not intended for use by young children or infirm person without supervision; young children should be supervised to ensure that they do not play with the appliance.

CAUTION

The manufacturer do not take the responsibility of the accident happened because the air conditioner is not fixed firmly or installed securely, during installing or using the product. In case you have difficulty in installation, you must ask for an installation specialist help. The accident will be happened in case of installing improperly.

E-2

ENGLISH

	Contents
PREPARING YOUR AIR CONDITIONER
■	Safety Precautions .........................................................................................	2
■ Air Conditioning Unit - Main Parts and Control Panel ....................................		4
OPERATING YOUR AIR CONDITIONER
■	Cooling Your Room ........................................................................................	5
■	Airing Your Room ...........................................................................................	6
■ Switching the Air Conditioner Off ....................................................................		6
■ Adjusting the Air Flow Direction Horizontally ..................................................		7
■ Adjusting the Air Flow Direction Vertically ......................................................		7
■	Selecting Energy Saving Mode (Only F3/A3/G3 models) ..........	8
RECOMMENDATIONS FOR USE
■	Operating Recommendation ...........................................................................	8
■ Temperature and Humidity Ranges ................................................................		8
■	Cleaning Your Air Conditioner ........................................................................	9
■	Solving Common Problems ............................................................................	11
■	Technical Specifications .................................................................................	12
INSTALLATION .......................................................................................................		13

The illustrations in the step-by-step procedures use four different symbols:

PRESS

PUSH

IMPORTANT

NOTE

CAUTION

" The high inrush current of the starting compressor motor can have adverse effects to the operation of other equipment under unfavorable mains conditions. This equipment does not comply with the relevant technical standards for the limitation of voltage fluctuations and flicker."

Before connecting this equipment to the power supply system, please report to your supply authority and obtain the consent.

Do not connect other electric appliances to the same supply lines.

AW18

The maximum permissible system impedance at the power junction box is 0.24 ohms. Usually, the maximum permissible mains impedance will not be exceeded when the branch to the power outlet is fed from a junction box with a rated current of 32A.

E-3

Air Conditioning Unit - Main Parts and Control Panel

The design and shape are subject to change according to the model.

Air inlet (Inside)

Air filter (The air filter is located in inside.)

F0/A0/G0

F1/A1/G1

mode selection dial

F3/A3/G3

Operating mode selection dial

flow blade swing switch

Air outlet

Inner air flow blades (right/left orientation)

Outer air flow blades (up/down orientation)

Air inlet (Outside)

Ventilation lever

The power plug may be not supplied depending on the model.

Power plug

Power cable

Blue Brown Yellow/Green

Main Power Earth

Operating mode selection dial

Temperature control dial

The type of the power plug may differ according to the type of local power supply.

Power cable connection should be committed to an installation engineer.

Temperature control dial

Air flow blade swing switch

Temperature control dial

Energy Saver switch

E-4

Cooling Your Room

You must select the Cool mode if you wish to lower the temperature in your room. You can also set the fan speed.

1Select the operating mode and fan speed.

To cool your room with a... Set the operating mode

		selection dial to...
	High fan speed	HI COOL
	Between HIGH and LOW	MED COOL
	Low fan speed	LOW COOL

Result: The air conditioner starts up in Cool mode.

The fan starts up at the speed selected.

You can change modes at any time.

2To adjust the temperature, turn the temperature control dial to the desired position.

Possible temperatures: Between 18°C and 29°C inclusive.

Result: The air conditioner starts cooling if the room temperature is higher than the selected temperature.

ENGLISH

	27˚C ~ 23˚C
29˚C	23˚C
~ 27˚C	~ 18˚C

3 To control the direction of the air flow, refer to page 7.

E-5