SAMSUNG AW07A0SE_CAF.41915.1.15 Service Manual
ROOM AIR CONDITIONER
AW07A0SE/AW07A1SE
AW09A0SE/AW09A1SE
SERVICE Manual
AIR CONDITIONER |
CONTENTS |
|
|
1. |
Precautions |
|
2. |
Product Specifications |
|
3. |
Operating Instructions and |
|
|
Installation |
|
4. |
Disassembly and Reassembly |
|
5. |
Troubleshooting |
|
OFF |
|
|
LOW |
|
FANHI |
COOL |
|
|
|
|
|
HI |
|
|
COOL |
|
|
OPERATION |
|
|
THERMOSTAT |
|
6.Exploded Views and Parts List
7.Block Diagram
8.Wiring Diagram
ELECTRONICS
©Samsung Electronics Co., Ltd. MAR. 1999. Printed in Korea.
Code No. DB81-00066A(1)
1. Precautions
1.Warning: Prior to repair, disconnect the power cord from the circuit breaker.
2.Use proper parts: Use only exact replacement parts. (Also, we recommend replacing parts rather than repairing them.)
3.Use the proper tools: Use the proper tools and test equipment, and know how to use equipment may cause problems laterintermittent contact, for example.
4.Power Cord: Prior to repair, check the power cord and replace it if necessary.
5.Avoid using an extension cord, and avoid tapping into a power cord. This practice may result in malfunction or fire.
6.After completing repairs and reassembly, check the insulation resistance, Procedure: Prior to applying power, measure the resistance between the power cord and the ground terminal. The resistance must be greater than 30 megohms.
7.Make sure that the grounds are adequate.
8.Make sure that the installation conditions are satisfactory. Relocate the unit if necessary.
9.Keep children away from the unit while it is being repaired.
10.Be sure to clean the unit and its surrounding area.
Fig. 1-1 Avoid Dangerous Contact
Fig. 1-2 No Tapping and No Extension Cords
Fig. 1-3 No Kids Nearby!
Fig. 1-4 Clean the Unit
Samsung Electronics |
1-1 |
2. Product Specifications
2-1 Table
Item |
Unit of Measure |
AW07A0SE |
|
AW07A1SE |
|
AW09A0SE |
|
AW09A1SE |
Remarks |
|
|
|
|
|
|
|
|
|
|
Type |
- |
|
|
Window |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dimensions: |
mm (inch) |
|
|
520 X 345 X 485 (20.5 X 13.6 X 19.1) |
|
|
|||
(Width X Height X Depth) |
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Packing Size |
mm (inch) |
|
|
571 X 449 X 546 (22.5 X 17.7 X 21.5) |
|
|
|||
(Width X Height X Depth) |
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Voltage: |
Volt |
|
220 - 240 |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
Phase |
- |
|
|
Single |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Frequency |
Hz |
|
50 |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Operating Current |
A |
|
3.5 |
|
4.5 |
|
|
||
|
|
|
|
|
|
|
|
|
|
Power Consumption |
W |
|
750 |
|
1,000 |
|
|
||
|
|
|
|
|
|
|
|
|
|
Refrigerant Type |
FREON |
|
|
R-22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Refrigerant Charge |
g |
|
410 |
|
420 |
|
|
||
|
|
|
|
|
|
|
|
|
|
Cooling Capacity |
KW |
|
2.05 |
|
2.60 |
|
|
||
|
|
|
|
|
|
|
|
|
|
EER |
KW/Wh |
|
2.05 |
|
2.6 |
|
|
||
|
|
|
|
|
|
|
|
|
|
Net Weight |
kg |
|
28 |
|
29 |
|
|
||
|
|
|
|
|
|
|
|
|
|
Condenser |
Row |
|
|
2 x15 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Condenser Fan |
Type |
|
|
Propeller Fan |
|
|
|||
|
|
|
|
|
|
|
|
|
|
Evaporator |
Row |
|
|
2 x14 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Evaporator Fan |
Type |
|
|
Blower |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fan Motor |
W |
|
|
IC - 9630SWJ5B |
|
|
|||
|
|
|
|
|
|
|
|
||
Compressor(Rotary) |
Model |
44A070JW1E1 |
|
44B092JW1E5 |
|
||||
Overload Protect |
- |
MST24AMN - 12008 |
|
KRA1256 - 12007 |
|
||||
Compressor Capacitor |
|
25/370 |
|
|
20/370 |
|
|
|
|
µF/ VAC |
|
Dual Type |
|
Dual Type |
|
||||
|
|
|
|
||||||
Fan Motor Capacitor |
|
2.5/370 |
|
|
3/370 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fan Speed Control |
- |
|
|
Fan speed switch(High & Low) |
|
|
|||
Themo Control |
- |
|
|
Thermostat |
|
|
|||
Air Swing |
- |
- |
|
M2LJ49ZR42 |
|
- |
|
M2LJ49ZR42 |
|
|
|
(5/6 RPM) |
|
|
(5/6 RPM) |
|
|||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Samsung Electronics |
2-1 |
2-2 Dimensions
2-2-1 Main Unit
Unit : mm
485
Front view |
Side view |
345 |
345 |
|
OFF |
LOW |
LOW |
FAN |
COOL |
FANHI |
COOLHI |
OPERATION THERMOSTAT
520
2-2 |
Samsung Electronics |
3. Installation and Operating Instructions
3-1 Installation
3-1-1 Selecting Area for Installation
1.Make sure that you install the unit in an area providing good ventilation. The air conditioner must not be blocked by any obstacles affecting the airflow near the air inlet and the air outlet.
2.Make sure that you install the unit in an area that allows good air handling. The installation area must be able to endure vibration from the unit.
3.Make sure that you install the unit away from heat or vapor.
4.Make sure that you install the unit in an area which is cool and has adequate space.
5.Make sure that you install the unit in an area away from TVs, audio units, cordless phones, fluorescent lighting fixtures and other electrical appliances (at least 1 meter clearance).
6.Make sure that you install the unit in an area which provides easy drainage for condensed water.
7.Make sure that you install the unit in area not exposed to the rain or direct sunlight.
(Install a separate sunblind if exposed to direct sunlight).
8.Make sure that you install the unit in an area allowing good air movement. Do not install it in a space that would cause noise amplification
of noise.
9.Fix the unit firmly if mounted in a high place.
Caution:
Do not use the air conditioner in the following environments : greasy areas (including areas near machines), or marine areas. Contact your local dealer for advice.
Samsung Electronics |
3-1 |
Loading...