Samsung SGHA827, AT&T ACCESS User Manual

Samsung Access

TM

PORTABLE Quad-BAND

MOBILE PHONE

User Manual

Please read this manual before operating your

phone, and keep it for future reference.

A827_UCHA4_WB_011708_F7

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), LLC

Headquarters: Customer Care Center:
1301 E. Lookout Drive 1000 Klein St.
Richardson, TX 75082 Plano, TX 75074
Toll Free Tel: [phone].HELP (4357)

Internet Address: http://www.samsungusa.com

©

2008 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related

entities.
Access is a trademark of Samsung Telecommunications America
Do you have questions about your Samsung Mobile Phone?

For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:

www.samsungwireless.com/support

GH68-16310A
Printed in Korea
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S.
Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
Acess NetFront Browser®
FLO is a Trademark of Qualcomm Incorporated

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

1

Table of Contents

Section 1: Getting Started .............................................. 4

SIM Card Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Install Battery and SIM and Charge the Phone . . . . . . . . . . . . . . 4

Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the microSD™ Card . . . . . . . . . . . . . . . . . . . . . . . . . 6

Turning the Phone On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting Up Your Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Section 2: Understanding Your Phone ........................10

Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Side/Back View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . 13

Display Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Multitasking Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Selecting Functions and Options . . . . . . . . . . . . . . . . . . . . . . . 17

Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Section 3: Call Functions .............................................20

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Video Share . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Recent Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Call Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Data Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Data Call Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Options During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Section 4: AT&T Mobile TV with FLO .......................... 32

Welcome to AT&T Mobile TV with FLO . . . . . . . . . . . . . . . . . . 32

To subscribe to AT&T Mobile TV . . . . . . . . . . . . . . . . . . . . . . . 33

Using the Mobile TV Player . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Using the Program Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Want more? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Section 5: Cellular Video .............................................. 37

Cellular Video Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Media Clip Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Using the Video Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Customizing Cellular Video . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

My Purchases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Section 6: Entering Text ............................................... 43

Text Input Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Using the T9 Input Method . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Using the Alphabet Input Method . . . . . . . . . . . . . . . . . . . . . . 46

Using the Symbols Input Method . . . . . . . . . . . . . . . . . . . . . . 46

Using the Numeric Input Method . . . . . . . . . . . . . . . . . . . . . . 47

2

Section 7: Messaging ...................................................48

Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Display Icons for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Creating and Sending Text Messages . . . . . . . . . . . . . . . . . . . 49

Creating and Sending Multimedia Messages . . . . . . . . . . . . . 51

Locating a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Using Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Using Instant Messenger (IM) . . . . . . . . . . . . . . . . . . . . . . . . . 56

Signing into Your IM Account . . . . . . . . . . . . . . . . . . . . . . . . . 56

Signing into Your Mobile Email . . . . . . . . . . . . . . . . . . . . . . . . 56

Using Message Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Deleting Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Memory Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Section 8: MEdia Net and WAP ....................................61

Accessing the MEdia Net Home . . . . . . . . . . . . . . . . . . . . . . . 61

Accessing a MEdia Net Site . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Navigating with the WAP Browser . . . . . . . . . . . . . . . . . . . . . 62

Using Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Using your History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Clearing Caches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Clearing the Cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Changing the WAP Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Section 9: AT&T Mall .................................................... 69

Shop Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Shop Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Shop Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Shop Multimedia Content . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Shop Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Shop Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Accessing the MEdia Net Home . . . . . . . . . . . . . . . . . . . . . . . 72

Section 10: AT&T Music ............................................... 73

Accessing AT&T Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Using the Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Playing Music while Multitasking . . . . . . . . . . . . . . . . . . . . . . 77

Using Playlists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Using MusicID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

XM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Music Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

The Buzz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Music Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Section 11: Using the Applications ............................. 86

Shop Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Using the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Using the Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Record Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Appointment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

3

Section 12: Understanding Your Address Book ........ 102

Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Address Book Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . 103

Adding a New Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Dialing a Number from the SIM Card using the Location

Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Finding My Own Phone Number . . . . . . . . . . . . . . . . . . . . . . 109

Setting FDN Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Group Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Managing Address Book Entries . . . . . . . . . . . . . . . . . . . . . . 112

Checking the Memory Status . . . . . . . . . . . . . . . . . . . . . . . . 113

Using the Service Dialing Numbers . . . . . . . . . . . . . . . . . . . . 113

Section 13: Changing Your Settings .......................... 114

Quick Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Set Sound Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Set Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Set Time & Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

Set Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Set Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Set Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Set Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Reset Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

Set Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Phone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Section 14: Accessibility ............................................133

Section 15: Health and Safety Information ............... 134

Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . 134

Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 135

UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Consumer Information on Wireless Phones . . . . . . . . . . . . . . 136

Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Using Your Phone Near Other Electronic Devices . . . . . . . . . 145

Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 146

Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 148

Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 149

Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 149

Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Section 16: Warranty Information ............................. 152

Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Index ............................................................................ 156

Getting Started 4

Section 1: Getting Started

This section describes the first steps to operating your phone.

SIM Card Information

When you subscribe for 3G cellular network services, you receive
a plug-in SIM (Subscriber Identity Module) card loaded with your
subscription details, such as your PIN and available optional
services.

Install Battery and SIM and Charge the Phone

1. If necessary, power-off the phone by holding down the

key until the power-off image displays.

2. Remove the battery by pressing the battery lock down and

sliding the battery cover away, as shown.

5

Inserting and Removing the SIM card

Important!:

The plug-in SIM card and its contacts can be easily damaged by
scratches or bending. Use caution when inserting or removing
the card, and keep all SIM cards out of the reach of children.

䊳

Make sure the gold contacts of the card are face down, then

slide the SIM card into the socket.

Installing the Battery

1. Align the battery tabs with the slots at the bottom of the

phone.

2. Press the battery down until it clicks into place.

3. With the battery in position on the phone, place the cover

back on the handset and slide it in until it clicks.

Important!:

Make sure that the battery is properly installed before switching
on the phone.

Charging a Battery

Your phone is powered by a rechargeable Li-ion battery. Use the
travel adaptor to charge the battery, and use only Samsung
approved batteries and chargers.

Note:

You must fully charge the battery before using your phone for the first
time. A fully discharged battery requires up to 4 hours of charge time.

Getting Started 6

Caution!:

For connection to an electrical supply not located in the U.S., you
must use an adaptor of the proper configuration for the power
outlet. Use of the wrong adaptor could damage your phone and
void your warranty.

1. Plug the connector of the travel adaptor into the jack on

the side of the phone.

Caution!:

The previous illustration shows both the correct and incorrect
method for connecting the charger. If the incorrect method is
attempted, damage to the accessory port will occur therefore
voiding the phone’s warranty.

2. Plug the adaptor into a standard AC wall outlet.

Important!:

The battery charging function may stop if you are on a call or
viewing a streaming-video while charging your battery.

3. When the phone is completely charged (the battery icon is

not animated), unplug the adapter from the power outlet.

4. Remove the adapter from the phone by gently pulling the

connector out.

Important!:

You must unplug the adaptor before removing the battery from
the phone during charging to avoid damage.

Installing the microSD™ Card

To add additional memory to your phone, you can insert a
microSD™ card into the side of the phone. Use the following
instructions and illustrations for proper insertion and removal.

1. Open the side slot to insert the card. Place the microSD™

card into the slot.

2. Push the microSD™ card into the slot until it clicks into

place.

Note:

Please note that the side with the gold contact pins should be facing
down when inserting the card.

+

Incorrect

Correct

7

3.

To remove the card, a quick press releases the card from

the slot.

Note:

The handset supports micro-SD cards of up to 8GB.

Low Battery Indicator

When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds, the “Battery Low” message
repeats at regular intervals on the display, and the empty battery
icon blinks. The backlight turns off to conserve the
remaining battery power.

Getting Started 8

Note:

If your phone is in Silent Mode, the Low Battery Indicator defaults to
Vibration (see “Other Available Profiles” on page 116.). If you change
the alert from Vibration to Mute, you will only see a flashing message
indicating a low battery.

If the battery level becomes too low, the phone automatically
turns off. Recharge your battery.

Turning the Phone On or Off

1. Press and hold the key until the phone power-on

screen displays.

Note:

Do not turn on the phone when mobile phone use is prohibited.

2. If the phone asks you to enter a password, enter a

password and press the

Confirm

soft key or the key.

For more information, refer to “Set Phone” on page 119.

The phone searches for your network and after finding it,

the Idle screen displays. Now, you can make or receive

calls.

Note:

The display language is preset to Automatic at the factory. To change
the language, use the

Language

menu. For more information, refer to

“Set Phone” on page 119.

3. To switch off the phone, press and hold the key

until the power-off image displays.

Setting Up Your Voice Mail

Note:

If your service provider did not pre-configure your voice mail server
number, you will need to store the Voice Mail server number before
accessing the server. Your service provider can give you the number.

To access you voice mail from your keypad:

1. Press and hold .

2. Follow the voice mail prompts to the Voice Mail main

menu, then select option 4 to set up your voice mail

personal options:

•

Turn Notification On/Off

•

Change Administrative Options

•

For Greeting or Recorded Name

•

Change Notification Options

9

Changing the Voice Mail Name and Number

The SIM card gives you the default service number of the Voice
Mail center. However, you may need to change the number. Use
the following procedures to change your voice mail number.

1. Select

Menu ➔ Recent Calls

➔ Voice Mail ➔ Voice Server

Number ➔ Voicemail

. Press or the

Edit

soft key.

2. Locate the current voice mail number in the Center

Address field and press to delete the current

number.

3. Enter your new voice mail number. Press .

4. Press the key to return to Idle mode.

Understanding Your Phone 10

Section 2: Understanding Your Phone

This section outlines some key features of your phone. It also
displays the screen and the icons that are displayed when the
phone is in use.

Features of Your Phone

Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of the
features included in your phone:

•

User friendly, menu-driven access to features and options

•

Bluetooth wireless access

•

Camera and camcorder

•

AT&T Mobile TV with FLO™

•

Video Sharing

•

Instant Messaging capability

•

E-mail

•

Featured applications provide alarms, calendar, calculator, record
audio, converter, timer, stopwatch, and world time.

•

File viewer

•

Multimedia Message Service (MMS)

•

Multimedia capability (with included Music Player)

•

Photo caller ID

•

Speakerphone capability

•

Web browser

Front View of Your Phone

The following illustrations show the main elements of your
phone:

1

2

3

4

5

6

7

8

9

10

11

12

13

14

16

17

18

19

15

11

Slots, Controls and Keys

The following list correlates to the open and front view
illustrations.

1.

Headset jack/Adapter jack

: Allows you to plug in the travel

adapter (power), optional PC connection cable (data

transfer), and included headset for safe, convenient,

hands-free conversations.

2.

Display Screen

: This screen displays all the information

needed to operate your phone.

3.

Volume keys

: These keys allows you to turn up or down the

volume of the ringtone and the speaker. Press these keys

to turn the volume display on, and to change the volume.

To lower the volume of the ringer during an incoming call,

press the down volume key to the desired volume, or until

the option changes to Vibration All Activated. The volume

keys can also be used to scroll up or down to navigate

through the different menu options. These keys are also

used when the Music Player is active.

4.

Navigation keys

: This key allows you to scroll through

phone menu options and provides a shortcut to phone

functions from standby mode.

5.

Mobile TV key

: Allows you to access the Mobile TV with

FLO™ subscription service.

6.

Left soft key ( )

: Performs the functions indicated by

the screen text on the bottom of the display.

7.

Send key

: Allows you to place or receive a call. In standby

mode, press the key once to access the Recent Call log. If

you press and hold the key down, you will initiate the most

recent call from the Recent Call log.

8.

Voice Mail key

: Press and hold the key to

automatically dial your voice mail.

9.

Special Function keys: Asterisk/Shift

key - enters the [*]

character for calling features. In text mode, press to

change the character input type.

Asterisk

key -Press and

hold to enter a pause between numbers. Pressing

and holding the key will lock the phone.

Pound/

Space

key - enters the pound [#] character for calling

features. In text entry mode, press to enter a space

between characters.

Press and hold the key to activate/deactivate the

Silent profile.

Understanding Your Phone 12

10.

Microphone

: Allows the other callers to hear you clearly

when you are speaking to them.

11. Alphanumeric keypad: Use these keys to enter numbers,

letters and some special characters. When in Idle mode,

press and hold the key to access your voice mail

server or press and hold to enter an International

call prefix.

12. End/Power on/off/Menu Exit key: Ends a call. Press and

hold the key for a few seconds to power your

phone On or Off. While in the main menu, it returns the

phone to standby mode and cancels you input. When you

receive an incoming call, press to reject call.

13.

Right soft key ( )

: Performs the function indicated by

the screen text on the bottom of the display.

14.

Clear key ( )

: Deletes characters from the display

when you are in text entry mode. Deletes items when in an

application. When in a main menu, press to return to the

previous menu. A quick press of the key displays

the Calendar in Month view.

15.

Multitasking key

: Opens the application switch window

which allows you to select from a group of different

applications without having to exit from the currently

active application. These options include making a voice

call, text messaging, MEdia Net launch, launching the

music player, accessing games and applications, or end

multitasking.

16.

Camera

: Launches the camera function and activates the

camera shutter.

17.

Menu access/Confirm key (WAP browser)

: When navigating

through a menu, pressing the accepts the highlighted

choice in the menu. If you press once in Idle mode, the

WAP browser will launch.

18. Memory Card slot: Used to install an optional microSD

TM

card for additional data storage.

19.

Earpiece

: Used to listen to audio from your phone.

13

Side/Back View of Your Phone

Slots, Controls, and Keys

The following list correlates to the back and side view
illustrations.

1.

Camera lens

: Allows you to take pictures and shoot video.

2.

Speaker

: Allows you to listen to music stored on your

handset.

3.

Headset jack/Adapter jack

: Allows you to plug in the travel

adapter (power), optional PC connection cable (data

transfer), and headset for safe, convenient, hands-free

conversations.

4.

Volume keys/Menu Navigation

: Allows you to adjust the

ringer volume in standby mode or adjust the voice volume

during a call. To mute the ringer during an incoming call,

press the up or down volume key.

The volume keys can also be used to scroll up or down to

navigate through the different menu options.

This key is also used when the Music Player is active.

If you are playing music and the backlight goes out, you

will need to press this key to gain access to the music

player keys.

5.

Memory Card slot

: Used to install an optional microSD™

card for additional data storage.

1

3

4

5

6

2

Understanding Your Phone 14

6.

Camera Shutter/Multitasking

: The “up” side of this rocker

key launches the camera function and is the camera

shutter. The “down” side of the rocker key activates the

Multitasking menu.

Display Layout

The display has 3 areas:

1.

Icon bar

: displays the various phone icons, representing

such items as messages received, battery strength, signal

strength, and profile set.

2.

Text and Graphics area

: displays the area where text input

occurs, and where graphics display.

3.

Soft Key indicators

: displays the specific usage of the soft

keys. These indicators will change within menus and

functions.

Icons

Menu Options

3

2

1

tv

tv

pm

12:13

12:13

Nov 8

Nov 8

Thu

Thu

Shows the received signal strength. The greater the
number of bars, the stronger the signal.

Appears when the phone is accessing services in a GPRS
network. When data is being transferred, this icon
animates.

Appears when the phone is accessing services in an EDGE
network. When data is being transferred, this icon
animates.

Appears when the phone is accessing services in a 3G
(UMTS) network. When data is being transferred, this icon
animates.

Appears when the phone is accessing services in a 3G+
(HSDPA) network. When data is being transferred, this icon
animates.

Appears when a strong TV signal is present for Mobile TV
with FLO™ reception.

tv

tv

15

Note:

The default phone profile is Normal, the profile is editable and the
displayed icons may vary according to the setting.

Appears when a TTY adapter is plugged into the handset,
making it accessible via a keyboard for the hearing or
speech impaired.

Appears when a call is in progress.

Appears when there is no network coverage available.
When you are out of the service area, you cannot make or
receive voice calls.

Appears when an alarm is set on your phone.

Appears when the incoming alert is set to Vibration or when
the Silent profile is set to Vibration.

Appears when your incoming phone calls are being
forwarded to another number.

Appears when a new voice mail has been received.

Appears when a new text message has been received.

Appears when a new email message has been received.

Appears when a new multimedia message has been
received.

Appears when a push-message has been received from
the WAP server.

Appears when a new Over the Air (OTA) software update
file has been received.

Appears after your memory card has been inserted.

Appears when Bluetooth wireless technology is active. It
appears a solid red until the connection is set, then
changes to a solid blue. When transferring data, this icon
blinks red and blue.

Appears when a Bluetooth wireless headset is active and
in use.

Appears when you are using the phone’s Music Player.

Appears when you are connected to a PC via a USB port.

Understanding Your Phone 16

Back Light

A back light illuminates the display and the keypad when you
press any key. It turns off when no keys are pressed within a
given period of time, and/or dims the light, depending on the
settings in the Backlight Time menu.

Multitasking Menu

This menu is launched by pressing the Multitasking key on the
right side of your handset. This menu allows you to choose which
tasks you want to perform. The menu icons choices are as
follows:

Appears when the phone’s profile is set to Silent. In this
case, the speaker is muted and displays incoming call or
message information on the LCD. This Speaker off icon is
replaced on screen by the Vibration icon when the Silent
profile is changed to Vibration instead of Mute.

Appears when the phone’s profile is set to Driving. In this
case, the speaker is active at twice the volume level and
will launch the currently selected ringtone or melody when
the associated notification is activated.

Appears when the phone’s profile is set to Outdoor. In this
case, the speaker is active, the volume settings are raised
to their highest levels, any currently active ringtones or
melodies are activated, and the phone’s vibrate feature is
activated.

Shows the level of your battery. The more bars you see, the
more power you have remaining.

Call

: allows you to make a voice call while using the
handset for other tasks. If Music Player is active, it is
muted during the call.

Messaging

: allow you to sent a text or multimedia

message while using the handset for other tasks.

MEdia Net

: allows you to launch the MEdia Net browser

while using the handset for other tasks.

Music Player

: allows you to launch the Music Player while
using the handset for other tasks. If an incoming call is
received, or you want to make a voice call, the Music
Player is muted until the call ends.

Games and Apps

: allows you to launch games or other

applications while using the handset for other tasks.

End all?

: allows you to end or cancel multitasking, and

returns the handset to single task usage.

17

Selecting Functions and Options

Your phone offers a set of functions that can be customized for
your ease and specific needs. These functions are arranged in
menus and sub-menus, accessed using the two soft keys. Each
menu and sub-menu allows you to view and alter the settings of
a particular function.

If you select the

Options

soft key in Idle mode, the

following displays under the title of My Menu:

•

Bluetooth

: allows you to use the Bluetooth functionality of the

handset.

•

Alarms

: allows you to set or alter alarm settings, including a Wake-up

Alarm.

•

Calendar

: allows you to access the Calendar application, where you

can set alarms, tasks, events, and reminders.

•

My Stuff

: allows you to quickly access your My Stuff folder which

contains items such as: Music, Video, Graphics, and Application files.

•

Empty

: (locations 5-12) allows you to program additional frequently
used features. Select an empty slot and press the key. Use the
Menu

and Navigation keys to select a feature, then press the

Assign

soft key or the key. The key operates as

Assign

when there

is no sub-menu, and

More

when there is a sub-menu

In some functions, you may be asked for a password or PIN.
Enter the appropriate code and press the key.

When you access a list of options, your phone highlights the
currently active option. If, however, there are only two options,
such as

On/Off

or

Enable/Disable

, your phone highlights the
option that is not currently active, so that you can select it
directly.

Selecting Options

To view the various functions and options available and to select
the one you want:

•

Press the appropriate soft key.

•

To select the function displayed or the option highlighted, press the

key.

•

To view the next function or highlight the next option on a list, press the

Down

Navigation key or the key on the left side of the phone.

•

To move back to the previous function or option on a list, press the Up

Navigation key or the key on the left side of the phone.

•

To move back up one level in the menu structure, press the

Back

soft

key.

•

To exit the menu structure without changing the settings, press the

key.

Command Keys

Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the left soft key

and the right soft key .

Understanding Your Phone 18

Soft Keys

The roles of the soft keys vary depending on the function you are
currently using; the labels on the bottom line of the display just
above each key indicate their current role.

Left Soft Key

Some functions of the left soft key are as follows.

•

At the Idle screen, the left soft key function is to launch the
main

Menu

.

•

When in a menu mode, the left soft key function is

Select

. It

may also be the OK or

Confirm

function.

Right Soft Key

Some functions of the right soft key are as follows.

•

At the Idle screen, the right soft key function is to launch the

My Menu

screen; see

“Selecting Functions and Options”

on

page 17.

•

When in a menu mode, the right soft key function is

Back

or

Cancel

.

Clear Key

The CLR key is used to erase or clear numbers, text, or
symbols from the display. You can also use to return to a
previous menu or to return to standby mode from any menu.

•

At the Idle screen, a quick press displays the calendar in Month view.

•

If you enter an incorrect character, briefly press to backspace
(and delete) the character.

•

To erase the entire sentence, press and hold .

•

To back up one menu level, briefly press .

End Key

The

End

key is used to turn on/off your phone,

disconnect calls, and return to the standby mode.

•

Press and hold the to turn on/off your phone.

•

Briefly press once to disconnect a call.

•

Press to return to standby mode from any menu.

Send Key

The

Send

key is used to answer calls, dial calls, and to

recall the last number(s) dialed, received, or missed.

•

Press once to answer calls.

•

Enter a number and briefly press to place a call.

•

Briefly press in standby mode to display a list of recent calls to
and from your phone.

/HIW6RIW.H\

&RUUHVSRQGLQJ

/HIW6RIW.H\

6HOHFWLRQ

&RUUHVSRQGLQJ
5LJKW6RIW.H\
6HOHFWLRQ

5LJKW6RIW.H\

19

•

Press twice in standby mode to call the most recent number.

•

Press to pick up a waiting call.

Navigation Key

Use the directional keys on the Navigation key to browse menus,
sub menus, and lists. Press the Up or

Down

Navigation keys

when jumping to highlighted links on the web.

Each key also acts as a shortcut to launch applications from the
Idle screen.

OK Key

The key is used as an OK key during many menu selection
functions. It can be used to complete many of the functions
instead of the soft keys. It also functions as the shutter key for
the camera. When in Idle mode, press the key to connect
WAP.

Passwords

There are three types of passwords used on the handset. These
are:

•

User-Defined Password

: most phone functions that require a
password use a password you create and maintain. The first time you
access one of these functions, you will be prompted to create the
password. For any access of those functions after you have created
the password, the prompt will read “

Enter Password

.”

•

PIN Password

: PIN (Personal Identification Numer) is a service

provider set 4-digit to 8-digit password that you can change (see

“Set

Phone”

on page 119.). This password is used to limit access to the
handset. Any time that the PIN password is required, the prompt will
read “

Enter PIN password

.”

•

PIN2 Password

: PIN2 is also a service provider set 4-digit to 8-digit
password that you can change, used to limit access to the handset.
Any time that the PIN password is required, the prompt will read
“

Enter PIN2 password

.”

Important!:

To obtain the PIN and PIN2, please contact your service provider.

Address Book

Choose Your
Community

Create New Message

My Stuff

Call Functions 20

Section 3: Call Functions

This section describes how to make or answer a call. It also
includes the features and functionality associated with making or
answering a call.

Making a Call

䊳

At the Idle screen, enter the area code and phone number, and

press the key.

Note:

When you activate the

Auto Redial

option in the Voice Call menu, the
phone automatically redials up to 10 times when the person does not
answer the call or is already on the phone.

Making an International Call

1. Press and hold the key. The + character displays.

2. Enter the country code, area code, and phone number,

then press the key.

Correcting an Entered Number

Use the following steps to correct a mis-typed entry when
dialing.

•

To clear the last digit displayed, press the key.

•

To clear another digit in the number, press the

Left

or

Right

Navigation
key until the cursor is immediately to the right of the digit to be
cleared. Press the key.

•

To enter a missing digit press the

Left

or

Right

Navigation key until the

cursor is in position and enter the digit.

•

To clear the entire display, press and hold the key.

•

Press the key to return to the Idle screen.

Ending a Call

Press the key when you want to end the call.

Redialing the Last Number

All incoming, outgoing and missed calls are listed in the Recent
Calls Menu. If the number or caller is listed in your Address Book,
the name associated displays.

To access the

Recent Calls

menu:

1. In Idle mode, select

Menu ➔ Recent Calls

.

2. Use the

Up

and

Down

Navigation keys to scroll through the

Recent Calls options. Choose from

All Calls, Missed Calls

,

Calls Made, Calls Received, Voice Mail, Speed Dial List

,

Delete All, Call Time, Data Volume

, or

Data Call Time

.

21

Only the

All Calls, Missed Calls, Calls Made

, and

Calls

Received

have the ability to dial back or redial.

3. Highlight the number to select, and press the key.

- or -

1. In Idle mode, press the key to display a list of the

most recent numbers used in the order you dialed or

received them.

2. Use the

Up

and

Down

Navigation keys to scroll through the

numbers until the number you want highlights.

3. To dial the number, highlight the number and press the

key.

Making a Call from the Address Book

You can store phone numbers that you use regularly on the SIM
card or in the phone’s memory. These entries are collectively
called the

Address Book

.

Once you have stored a number in the

Address Book

, you can dial

it by pressing a few keys using the

Speed Dial

feature.

For further details about the

Address Book

feature, see “Finding

an Address Book Entry” on page 102.

Answering a Call

When a call is received, the phone rings and displays the caller’s
phone number, or name if stored in the Address Book.

1. In Idle mode, press the key. You may set other

options to answer an incoming call using the following:

•

If the

Any key

option in the

Menu ➔ Settings ➔ Set Calls ➔

General ➔ Call Answer

menu is activated, you can press any key

to answer a call except for the key.

Note:

To reject an incoming call, press and hold either

Volume

key on the left

side of the phone or press the

Reject

soft key. A quick press of either

Volume

key silences the ringer on an incoming call.

2. End the call by pressing the key.

Note:

You can answer a call while accessing the Address Book or other menu
features. After ending the call, the phone returns to the function screen
you were using.

Video Share

The Video Share feature allows you to place a call and share live
or recorded video while on the call. You can initiate or receive
video by using the following steps. To enable or disable Video
Share, see “Video Share Settings” on page 129.

Call Functions 22

Initiating and Receiving a Video Share Session

1. Dial the number and press the key.

2. Once the call is answered, if you're both capable of Video

Share, the

Video Share

icon

displays on both screens and the soft key changes to

Video Share

. Press the soft key to invite the other

party to see video shot from your phone.

Important!:

When establishing a Video connection, the first user that actually
selects the Video Share option becomes the sending phone.

"

Establishing a Video Connection

" displays. A message is

sent to the recipient "

###-###-#### Wants to Share Video

With You.

"

3. The recipient receives a Video Share pop-up to

Accept

or

Decline

the Video Share call. To continue, press the

soft key to

Accept

or the soft key to

Decline

.

4. If you have the Auto Record option set to

On

, a

“Recording

Started”

pop-up displays that shows the memory available

for the video.

Auto record records the video share session, but only when

the Auto Record Video Share setting has been enabled. For

more information, refer to “Video Share Settings” on

page 129.

5. During a Video Share session, the following functions

display as icons on the screen. Use the

Right

and

Left

Navigation key to select.

Stop

: select this option to stop the video share fea ture.

Brightness

: select this option to adjust the brightness

for the video on the senders handset only.

Full Screen

: select this option to resize the picture from
Landscape to Full Screen mode. Press any key to
revert to Landscape. Available when receiving video
only.

Mute

: select this option to turn the audio off.

Unmute

: select this option to turn the audio back on.

Spkr Off/On

: select this option to turn off/on the

speaker.

23

6.

To stop the video sharing, press the

Options

soft key and

select the “Video Share End” option. Either party in a Video

Share call may terminate the Video Share.

A pop-up message displays “A

re You Sure You Want to Stop

Video Sharing?

”

7. Press the

Ye s

soft key to stop. The phone then displays

“

Video Sharing has been Stopped. Save the Recorded

Video?

” Press the

Ye s

soft key to save the video. Recorded

videos are stored in the

My Stuff ➔ Video

folder.

Video Share (In-Call)

䊳

You can begin a Video Share call during an existing call by

pressing the

Options

soft key and selecting

Video Share ➔ Live

.

Play a Video Share Recording

During a call (while not in a Live Video Share session) you can
share a recorded video with the recipient. Press the

Options

key

and select

Video Share ➔ Recorded

and then select from the

available files in your

My Stuff ➔ Video folder

. To make the

connection, the recipient should press

Accept

and the video

begins to play on both phones.

Recent Contacts

The phone stores the numbers of the calls you’ve dialed,
received, or missed in the Recent Calls menu. If the number or
caller is listed in your Address Book, the associated name
displays.

Recent contacts also include text, multimedia messages, and e­mail messages, as well as alerts for voice mail messages.

View Tab

The View Tab is an area that only appears on the display when a
call, message, or voice mail is received by the phone but not
answered or viewed.

There are three tabs for View: Missed Calls ( ), Voicemails
( ), and Messages ( ). You can search through calls
and messages you have not viewed by using the

Right

and

Left

navigation keys to get to the message type, then select the

View

View Exit

tv

tv

pm12:13

12:13

Nov 8

Nov 8

Thu

Thu

2 Missed Calls

3:25PM Nov 9

Call Functions 24

soft key. When you select a tab, you are viewing either the
Missed Call folder or the Messaging Inbox, or calling the Voice
Mail number.

Note:

If you select the Voicemail icon, pressing or the

Dial

soft key will
dial the Voicemail center so that you can listen to your voice mail
messages.

Viewing Missed Contacts

The number of contacts you have missed displays on the Idle
screen if the phone is on. The View tab also displays when you
first turn the phone on and you received calls or messages when
the phone was off.

To view the call details:

1. If the phone is off, turn it on.

If you received calls, voice mail, or messages during the

time the phone was off, the View Tab displays the contacts

missed.

2. If you have received more than one type of missed contact,

use the

Left

or

Right

Navigation key to select the type of

missed contact, then press the

View

soft key. The most

recently missed contact of that type (call, message, or

voice mail) displays.

3. To scroll through the list of missed contacts, press the

Up

or

Down

Navigation key.

4. To move to another contact type (i.e. voice mail, text,

multimedia, or e-mail messages), press the

Left

or

Right

Navigation key.

Viewing the Details of a Missed Voice Call

To view the details of a selected missed voice call:

1. Press the

View

soft key. The most recently missed call

displays. To scroll through the list of missed calls, press

the Up or

Down

Navigation key.

2. Select a missed call and press the

Options

soft key.

3. Use the Navigation keys to highlight

Details

and press the

key.

Returning Back a Missed Call

To return a missed call number:

1. Press the

View

soft key. The most recently missed call

displays.

2. To scroll through the list of missed calls, press the

Up

or

Down

Navigation key.

25

3.

Highlight the number and press the

Options

soft key and

select

Call Back

, or press .

Saving a Missed Call Entry to your Address Book

To save the missed call entry to your address book:

1. Press the

View

soft key. The most recently missed call

displays.

2. With the missed call selected and press the

Options

soft

key.

3. Use the navigation keys to highlight

Save to Address Book

and press the key.

4. Select the location of your Address Book:

• Phone

: This option allows you to save the missed number to your

Address Book stored on the phone.

•SIM

: This option allows you to save the missed number to your

Address Book stored on the SIM card.

For further details about the Address Book feature, see “Adding a
New Contact” on page 104.

Sending a Message to a Missed Call

To send a text message or attachment to a missed call entry:

1. Immediately after missing a call, press the

View

soft key.

2. Press

Options ➔ Send Message

. Press the key.

3. At the “Create New Message” screen, type in your

message using the alphanumeric keys.

4. Press the

Options ➔ Add Item

to insert items such as an

Image, Sound, or Video.

5. When you are done with your message, press the

Options

➔

Send

option. You may also press the

Send To

soft key or

the key.

Note:

When you select the "Add item" option, the setting automatically
changes to "Multimedia Message".

Deleting a Missed Call

To d e l ete a missed call entry:

1. Immediately after missing a call, press the

View

soft key.

2. Press

Options ➔ Delete

. Press the key.

Delete has two options: Selected or All.

Selected

will delete

only the entry that is actively selected;

All

will delete all

entries in the Recent Calls Log.

Call Functions 26

3.

At the “Delete?” prompt, press either the

Ye s

soft key or

the key to confirm deletion, or the No soft key to

cancel.

4. You can press the key at any time to exit the

Missed Call feature.

Call Time

Call time refers to the amount of time used in calls, both calls
sent and calls received.

1. From the Idle Screen, press the

Menu ➔ Recent Calls

and

press the key.

2. Press

Call Time ➔ Select

soft key or the key.

The following options are available.

•Last Call Time

: shows the length of time for the last call.

•Total Sent

: shows the total length of time for the calls made.

• Total Received

: shows the total length of time for the calls

received.

3. To reset the value of these counters, select the desired

option and press the

Reset

soft key.

Note:

If this is the first time you have attempted to reset the value of the
counters, you will be prompted to create a New Password. Afterward,
you will be prompted to enter the password you created.

4. Enter the password and press the

Confirm

soft key to reset

the selected option.

5. Press the

Back

soft key or the key to end.

Data Volume

Data Volume refers to the amount of data (volume) to and from
the phone.

1. In Idle mode, press

Menu ➔ Recent Calls ➔ Data Volume

and press the key.

2. Use the

Up

and

Down

Navigation keys to view the following

information:

•Last Sent Data

: shows the size of the last data packet (measured
in KB - kilobytes) sent by the phone since the last time this counter
was reset.

• Last Received Data

: shows the size of the last data packet
(measured in KB - kilobytes) received by the phone since the last
time this counter was reset.

•Total Sent Data

: shows the size of the total data packet (measured
in KB - kilobytes) which have been sent by the phone since the last
time this counter was reset.

27

• Total Received Data

: shows the size of the total data packet
(measured in KB - kilobytes) which have been received by the
phone since the last time this counter was reset.

3. To reset the value of these counters, select the desired

option and press the

Reset

soft key.

Note:

If this is the first time you have attempted to reset the value of the
counters, you will be prompted to create a New Password. Afterward,
you will be prompted to enter the password you created.

4. Enter the password and press the

Confirm

soft key to reset

the selected option.

5. Press the

Back

soft key or the key to end.

Data Call Time

1. In Idle mode, press the

Menu ➔ Recent Calls ➔ Data Call

Time

and press the key. The following options are

available:

• Last Data Call:

shows the time used for the last data call sent or

received since the last time this counter was reset.

• Total Data Call:

shows the total time used to send or receive data

since the last time this counter was reset.

2. To reset the value of these counters, select the desired

option and press the

Reset

soft key.

Note:

If this is the first time you have attempted to reset the value of the
counters, you will be prompted to create a New Password. Afterward,
you will be prompted to enter the password you created.

3. Enter the password and press the

Confirm

soft key to reset

the selected option.

4. Press the

Back

soft key or the key to end.

Silent Mode

Silent mode is convenient when you wish to stop the phone from
making noise, in a theater for example. For more information,
refer to “Other Available Profiles” on page 116.

In Idle mode, press and hold the key until the phone

vibrates, and the “

Silent Profile on

” message displays on screen.

Either the Silent mode icon or Vibrate icon displays on

screen.

In Silent mode, your phone’s speakers are muted. The phone
vibrates and lights up the display, or just lights the display,
depending on the settings of the Silent Phone Settings feature.

To exit and reactivate the previous sound settings, press and hold
the key again until “Normal Profile on” displays. The Silent
mode or Vibrate icons no longer display.

Call Functions 28

Options During a Call

Your phone provides a number of control functions that you can
use during a call.

Adjusting the Call Volume

During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone.

Press the key to increase the volume level and the key to
decrease the level.

In Idle mode, you can also adjust the ringer volume using these
same keys.

Putting a Call on Hold

You can place the current call on hold whenever you want. You
can also make another call while you have a call in progress if
your network supports this service.

To put a call on hold:

1. While on a call, press the

Options

soft key.

2. Highlight

Hold

and press the key. The call is on hold.

3. You can reactivate the call whenever you want, by pressing

the

Resume

soft key.

To make a call while you have a call in progress:

1. Place the current call on hold using the previous

procedure.

2. Enter the new phone number that you wish to dial or look it

up in the Address Book.

3. Press the key to dial the second call. Once

connected, both calls display on the screen.

When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.

To switch between the two calls:

1. Press the

Options

soft key.

2. Highlight

Swap

and press the

Select

soft key. The current

call (#2) is placed on hold and the previous call on hold

(#1) is reactivated so that you can continue conversing

with that person.

3. Press the key to end the currently selected call.

To end a call:

1. Press the

Options

soft key.

2. Highlight

End

and press the

Select

soft key.

3. Highlight the call you wish to end (Active Call, Held Call, or

All Calls) and press the

Select

soft key.

29

4.

Press the key to end the remaining call.

Using the Speakerphone Key

1. During a call, press the speakerphone key .

2. Use the volume keys (located on the left side of your

phone) to adjust the volume.

In Call Options

During a call, the two soft keys become call

Options

(left soft key)

and

Mute

(right soft key). To access the following call options,

press the

Options

soft key.

•

Mute

: Mutes the on-board microphone.

•

Video Share

: Initiates a video sharing session. Video can be Live or

Recorded.

•

Hold

: Places the current call on hold.

•

New Call

: Places the current call on hold and then allows you to enter

and dial another number.

•

Address Book

: Allows you to access your Address Book information.

•

Send Message

: Allows you to create and send a new Text message or

Multimedia Message.

•

Calendar

: Allows you to access your calendar while still maintaining

the current call.

•

Notes

: Allows you to create a note during the current phone call. This
note is accessible for editing when you are no longer in the call. For
further information on using Notes, see

“Notes”

on page 99.

•

Whisper Mode On/Off:

Increases the microphone sensitivity level so
that you do not have to speak loudly to be heard by the other party.
Used in quiet environments such as theaters, meetings, etc.

•

Mute Keypad Tone

: Silences/mutes the key tones when on the call.

•

Send DTMF

: Sends DTMF (Dual Tone Multi-Frequency) tones to the
contacts you have selected. These DTMF tones are sent as a group.
The DTMF tones are the tones used in phones for tone dialling,
sounding when you press the number keys. This option is helpful for
entering a password or an account number when you call an
automated system, like a banking service.

•

Save to Address Book

: Allows you to add the current phone number

to your Contacts list on either your Phone or SIM card.

•

End Call

: Allows you to end the current call.

If you are in a call, you can place the current call on hold by
selecting the

New Call

option above. Once the additional call has

been answered, the following options are available.

•

Swap

: Places the current call on hold and then activates the previous

call.

•

Join

: Joins all of the calls you have established with your phone (both

active and on hold) into a multi-party call.

Call Functions 30

When you want to finish, end each call normally by pressing the

key.

Muting or Sending Keypad Tones

These options allow you to turn the keypad tones off or on. If the

Mute Keypad Tone

option is selected, it allows you to press keys

without hearing keypad tones during a call.

Note:

To communicate with answering machines or computerized telephone
systems, the

Send Keypad Tone

option must be selected.

Switching off the Microphone (Mute)

You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.

Example:

You wish to say something to person in the room, but do not want
the person on the phone to hear you.

During a call, to switch the microphone off temporarily:

1. Press the

Mute

soft key. Unmute displays.

2. Press the

Unmute

soft key to deactivate the Mute function.

Searching for a Number in the Address Book

You can search for a number in the Address Book during a call.

1. Press the

Options

soft key.

2. Press the

Down

Navigation key to highlight the

Address

Book

option and press the key.

3. Highlight the Address Book entry by using the

Up

or

Down

Navigation key.

- or -

4. Enter the first few letters of the contact into the Search

field, which then highlights the closest match in the

Address Book list.

5. To view the highlighted entry, press the

View

soft key.

6. Press the

Select

soft key to automatically place the active

call on hold and dial the searched contact. The

New Call

pop-up screen displays. You can select this number and

Call

it or you can select the

Back

soft key to return to the

Call screen.

For further details about the Address Book feature, see “Finding
an Address Book Entry” on page 102.

Call Waiting

The Call Waiting feature allows you to answer an incoming call
while you have a call in progress, if this service is supported by
the network, and you have set the

Settings ➔ Set Calls ➔ Voice

31

Call ➔ Call Waiting

menu option to

Activated

. You are notified of

an incoming call by a call waiting tone.

To answer a call while you have a call in progress:

1. Press the key to answer the incoming call. The first

call is automatically put on hold.

2. To switch between the two calls, press the

Options

soft key

and highlight

Swap

.

To end a call on hold:

1. Press the

Options

soft key.

2. Select

End ➔ Held Call

or press the key.

3. To end the current call, press the key.

Note: Join

: Joins all of the calls you have established with your phone (both

active and on hold).

Swap

: Places the current call on hold and then activates the previous

call.

3-Way Calling (Multi-Party Calling)

The 3-Way or Multi-Party feature allows you to answer a series of
incoming calls and place them on hold. If this service is
supported by the network, all calls can be joined together. You
are notified of an incoming call by a call waiting tone.

To answer a call while you have a call in progress:

1. Press the key to answer the first incoming call.

2. Press the key to answer the consecutive incoming

calls. The previous call is then automatically put on hold.

3. To bring together the calls, press the

Options

soft key and

highlight

Join

.

4. To end the current call, press the key.

AT&T Mobile TV with FLO 32

Section 4: AT&T Mobile TV with FLO

This section describes how to subscribe to AT&T Mobile TV with
FLO™, use the Mobile TV Player, use the Program Guide, use the
Subscription Manager, and set up Parental Controls.

Welcome to AT&T Mobile TV with FLO

Congratulations! You are one step closer to experiencing the next
telecommunications revolution: AT&T Mobile TV with FLO.

The AT&T Mobile TV with FLO service allows you to watch an
exciting lineup of live entertainment, news, sports and kids'
programming from some of the most popular networks, including
CBS, Comedy Central, ESPN, FOX, MTV, NBC and Nickelodeon.

In addition to offering compelling programming and the highest
quality video and audio, the Mobile TV service is easy to use.
After you subscribe to your service, you can start watching your
favorite programs in the palm of your hand. The Program Guide is
simple to use and navigate, allowing you to see what is on. The
Samsung handset allows you to change from one channel to the
next quickly and easily without progress bars and download
delays.

What's more, watching television will not compromise the quality
of the voice service you've come to expect. AT&T Mobile TV with
FLO service was designed to give you a mobile TV experience
unlike any other.

Using your new Samsung phone to enjoy the AT&T Mobile TV
with FLO service is simple.

Important!:

The TV icon must be displayed on the Icon bar, indicating that
you are in an AT&T Mobile TV with FLO service area before you
attempt the following procedure.

1. Turn on your Samsung phone.

2. Press the key on your Samsung phone.

Note:

The first time you start AT&T Mobile TV may take a few minutes.

The Welcome to AT&T Mobile TV with FLO screen displays.

33

Important!:

Programming and available networks are subject to change.
Mobile TV with FLO services may require separate subscription
fees. Contact AT&T for details.

To subscribe to AT&T Mobile TV

1. Choose

Subscribe Now

and press the key.

The

Review Basic Package

screen displays.

If you choose

Subscribe Later

, you will have the opportunity

anytime you launch AT&T Mobile TV and get the

Subscribe

Now

option.

2. Read the basic package information and press the

Continue

soft key.

If premium content is available, the

Select Premium

Package

screen displays.

3. Scroll to the premium package(s) you want to add to your

basic package and press the key.

You can choose more than one premium package at a

time.

4. Press the

Continue

key when you are finished.

5. Press the

More Info

key if you need more information about

a premium package.

Note:

If you do not wish to select a premium package, press

Continue

after

selecting the base package.

The

Terms of Service

screen displays.

6. Read the Terms of Service and if you agree, press the

Agree

soft key. Press the

Disagree

soft key if you do not

agree.

You are prompted to exit the subscription process.

7. Press the

Submit

key to complete the subscription.

You are now subscribed to the package(s) you selected.

8. Press the

Close

key to return to the Player. You can start

viewing content immediately.

AT&T Mobile TV with FLO 34

Important!:

The costs of the package(s) are automatically added to your
monthly bill.

9. Edit or cancel your subscription package(s) through the

Subscription

screen, accessed in the

Program Guide

Options

menu.

Using the Mobile TV Player

Mobile TV Player displays scheduled programming content
according to the Mobile TV with FLO service package to which
you subscribe.

Important!:

You must be subscribed to AT&T Mobile TV with FLO service in
order to use the Mobile TV player.

To launch Mobile TV Player:

1. At the Idle screen, select

Menu ➔ TV & Video ➔ Mobile TV

.

Note:

Press the key to quickly launch Mobile TV Player.

The Mobile TV Player launch screen displays, showing the

progress of the application. Once the initialization is

complete, the first channel in the list displays.

2. Press the key to exit Mobile TV Player.

To change channels in Mobile TV Player:

䊳

Press the Up and

Down

Navigation keys.

When you select a current program in the Program Guide to
which you are subscribed, the Mobile TV Player displays the
program.

The Mobile TV Player shows the channel logo or call letters, title
of the program, duration of the program, and, if available, rating
information.

You can perform the following options from the Player:

•

Guide key

: displays the Program Guide

•

Up arrow

: cycles up through channels

•

Down arrow

: cycles down through channels

Using the Program Guide

Using the program guide is simple. You can view program times
and program descriptions by pressing the Up and

Down

Navigation keys. To view information about programs playing at a
later time, press the

Right

and

Left

Navigation keys.

1. To view a current program in the Program Guide, highlight

the program and press the key.

The Program Guide includes all scheduled programming

currently available with their respective channels, program

titles descriptions, and show times.

35

If you select a channel that is not currently included in your

subscription package, you can add that programming

package immediately by following the prompts on your

phone.

2. Press the

Options

soft key to display the menu and perform

tasks from the Program Guide.

3. Scroll to the desired option and press the key.

View description

䊳

From the

Options

menu, select

View description

to view a

description of a program you highlighted in the Program Guide.

Subscription manager

䊳

From the

Options

menu, select

Subscription manager

to

manage your subscription. While in the subscription screen,

press the

Options

key to display the subscription menu.

Parental controls

䊳

From the

Options

menu, select

Parental controls

if you wish to

limit access to certain rated programs.

To set Parental Controls:

1. Turn

Parental Controls

on.

2. Set up a PIN for the service.

3. Select the rating levels for the service.

After you perform these tasks, the service assesses a

program's rating before it allows program viewing.

Programs with restricted ratings require the PIN you set up

to view the program.

Note:

You must turn parental controls on before the ratings criteria can take
effect.

When a program is selected that exceeds the rating you set

䊳

Enter the PIN you selected at the prompt.

Note:

If you do not enter the correct PIN, you cannot view or listen to the
program.

To allow viewing only of this program:

䊳

Enter your PIN at the prompt. The program is now available for

viewing.

AT&T Mobile TV with FLO 36

Note:

After you set up the PIN, you must enter the PIN to remove or add
programming packages to your subscription.

Important!:

Keep the PIN in a safe place. Do not share your PIN with
unauthorized third parties. If you forget your PIN, call AT&T
customer service for assistance.

Check for updates

䊳

From the

Options

menu, select the

Check for updates

option to

see if there is an updated version of AT&T Mobile TV with FLO

service available for your phone.

Refresh subscription

䊳

From the

Options

menu, select the

Refresh subscription

option

if you believe your subscription is out of sync.

Tip:

You can sync your subscription if you have more than one AT&T Mobile
TV-enabled phone, and you want to swap the SIM card.

When you refresh your subscription, AT&T Mobile TV with FLO
service checks your records to verify that you are receiving the
correct package.

About

䊳

From the

Options

menu, select the

About

option to display the

current version of AT&T Mobile TV with FLO operating on your

phone.

Want more?

For more information about AT&T Mobile TV with FLO and for
current programming, go to

www.att.com/mobiletv

.

37

Section 5: Cellular Video

Your phone is equipped with a WAP (Wireless Application
Protocol) browser which allows you to access the Internet and
upload media files directly to your phone. These media files
display using the built-in Media Player.

Cellular Video (CV) is a media service which allows you to not
only navigate to your favorite web sites but stream media content
(Weather, News/Sports highlights, etc.) directly to your phone.

1. At the Idle screen, select

Menu

➔

TV & Video ➔

Cellular

Video

and press the key. You are then taken to your

default Cellular Video homepage.

This homepage provides you with several sections of

accessible content:

•My Favorites

: allows you to choose from some recently uploaded

video clips from media providers.

• Video Categories

: provides some general content categories from

which to begin searching for media.

• Customize Cellular Video

: allows you to access the Cellular Video
Settings menu where you can configure most of the settings
associated with Cellular Video.

•Parental Control

: provides you with settings which can be
configured to restrict certain media content from being displayed on
the phone.

•MEdia Net

: exits from the Cellular Video application and launches

the MEdia Net homepage.

•Help

: provides basic on-line assistance which answers most of the

common issues users come across while using this feature.

2. Highlight the desired media clip or select from one of the

available categories and press the key.

Cellular Video Options

1. At the Idle screen, select

Menu

➔

TV & Video ➔

Cellular

Video

and press the key.

2. From the main Cellular Video homepage, press the

Options

soft key to use one of the following options:

•Go

: lets you navigate Forward (next sequenced web page) or
Backward (to the previously visited web page) through pages in
your browsing history.

•Reload

: reloads the current page with any updated information that

is available.

•Smart-Fit/Desktop View

: changes the display mode of the

browser Smart-Fit sizes the display to fit the display area.

Cellular Video 38

•Page Size

: change the page size of the displayed web page using a

scale tool.

• Go to Homepage

: takes you back at any time to the homepage of

the Wireless Web service provider.

• Add to Favorites

: bookmarks the current page and marks it as a

favorite site.

•View Favorites

: accesses and displays the bookmarks assigned as

favorite web pages.

• Send URL via

: send the URL of the current page via either a

message or to another party via a Bluetooth device.

•Enter URL

: allows you to manually enter the URL address of a WAP
site. After entering an address, press the OK soft key to go there
directly.

• Copy URL to Message

: send the URL of the current page to

another party as a message.

•Save

: saves either the image of the current web page or the current

page itself.

•Saved Pages

: access the list of web pages you have saved.

•History

: displays the list of web pages you have recently accessed.

• Advanced

: allows you to change the following settings for the
browser.

–

Clear Caches

: deletes the information stored in the cache. The cache

stores the most recently accessed pages.

–

Empty Cookies

: delete cookies. Cookies are pieces of personal

information sent to a web server while navigating the web.

–

Cookie Options

: allows you to set whether to accept all cookies, reject

all cookies, or prompt for accept or reject.

–

Preferences

: changes the settings for the web browser to suit your

preference.

–

Certificates

: accesses certificate information from your phone.

–

Page Details

: displays the properties for the currently active web page.

–

Browser Settings

: selects a connection profile to be used when

connecting to the Internet.

–

About Browser

: displays the access version and copyright information

about the browser.

Media Clip Options

With the media currently active on the phone (either playing or
paused), press the

Options

soft key to open a list of the following

streaming media options.

Tip:

Within the clips listed in the My Favorites section of your main CV
homepage, highlight the description and then press the key to
begin the stream.

Pause/Resume

This feature allows you to toggle the state of the current video
between being

Paused

or

Resuming

playback.

Stop

The feature stops the current media, exits the media player and
returns you to the main Cellular Video homepage.

39

Jump to track time

This feature pauses the current media content and displays a
“Jump to track time” pop-up which allows you to enter an Hour,
Minute, and Second value which corresponds to the media’s
timeline.

If, as an example, the content is three minutes long, entering a
value of: 00:01:30, would cause the Media Player to begin
replaying the content from its half-way point.

1. Use your keypad to enter a value for the Hour, Minute, and

Seconds.

2. Press the

Jump

soft key to cause the Media Player to

resume playback at that value on the clip’s timeline.

- or -

3. Press the

Cancel

soft key to go back to your media clip and

resume playback from its previous location.

Properties

Displays a Media Player window which gives file specific
information such as title, and Duration.

Settings

This feature pauses the content and navigates you to the

Player

Settings

menu where you can configure the Media Player’s

settings.

1. Use the

Up

or

Down

Navigation key to increase/decrease

the current volume setting for the player while in Full

Screen mode or Normal View mode. Use the

Right

or

Left

Navigation key to fast forward or rewind in the video clip.

2. Press the

Save

soft key to save your changes

- or -

3. Press the

Back

soft key to resume your media playback

without saving your changes.

Cellular Video Settings

This feature allows you to configure the current server profile
being used by the key to access the on-board WAP. For more
information, refer to “Changing the WAP Profiles” on page 66.

Full Screen/Normal View Mode

This option allows you to set the video to be viewed in Full
Screen mode or in the Normal View mode. The default mode is
Normal View.

Cellular Video 40

Using the Video Categories

This grouping of media categories provides access to an
additional listing of streaming media. Where the previous
Favorites list of media stream can be user edited and updated,
this list of categories is defined by Cellular Video’s homepage and
can not be changed.

Viewing a Video Clip

1. At the Idle screen, select

Menu ➔ TV and Video ➔ Cellular

Video

and press the key.

2. Use the

Up

or

Down

Navigation key to highlight the video

clip from within the Favorites section and press the

key.

3. After the stream is buffered into memory, you can choose

to either

Pause

or play the content. Pressing the key

toggles the

Play

and

Pause

functionality.

Customizing Cellular Video

Updating the Favorites List

The list of media providers which display in the Favorites section
of the Cellular Video homepage can be edited and changed by
the user.

1. At the Idle screen, select

Menu ➔ TV and Video ➔ Cellular

Video

and press the key.

2. Use the

Up

or

Down

Navigation key to highlight the

Edit

button from the upper-right of the homepage (adjacent to

the My Favorites title) and press the key.

3. From

Customize Cellular Video ➔ Options

➔ Edit My

Favorites

, press the key.

4. Navigate to the

Add to Favorites

section of the page and

highlight one the additional streaming media channels

which are not currently in your Favorites list (ex: Cartoon

Network).

5. Press the

Options

soft key. Highlight

Add to Favorites

and

press the key.

Adding a Video Alert

When new media is available for upload to your phone (such as
breaking news), you can set your phone to notify you of the new
available content.

1. At the Idle screen, select

Menu ➔ TV and Video ➔ Cellular

Video

and press the key.

41

2.

Use the Up or

Down

Navigation key to highlight the

Customize Cellular Video

button from the bottom of the

homepage and press the key.

3. From

Customize Cellular Video ➔ Options ➔ My Video Alerts

,

press the key.

4. Navigate to the

Add to My Alerts

section of the page and

highlight one the available services (ex: Breaking News).

5. Select

Options ➔ Add to Favorites

and press the key.

My Purchases

The Cellular Video homepage can be used to shop for streaming
multimedia content. The My Purchases section can help keep
track of your purchase history and view any new resale products.

1. At the Idle screen, press the

Menu ➔ TV and Video ➔

Cellular Video

and press the key.

2. Use the

Up

or

Down

Navigation key to highlight the

Customize Cellular Video

button from the bottom of the

homepage and press the key.

3. From

Customize Cellular Video ➔ My Purchases

, press the

key.

4. Highlight

Purchase History

and press the key. This

provides you with an on-screen listing of your “to date”

purchase history for media content.

5. Highlight

My Account

and press the key. This provides

you with an on-screen description of your account details.

Parental Controls

Your phone can be configured to block both purchased and
streamed media content. Before filtering, you must first establish
a PIN and password, and a contact e-mail address. Once those
have been established, you have two available filter options:
Content Filters and Purchase Blocker.

•

Content Filtering

: let you restrict access to inappropriate content both

on and outside of MEdia Net.

•

Purchase Blocking

: lets you restrict the ability to buy ringtones,

downloads, games, etc., from this phone.

Setting up Parental Control

1. At the Idle screen, press the

Menu ➔ TV and Video ➔

Cellular Video

and press the key.

2. Use the

Up

or

Down

Navigation key to highlight the

Customize Cellular Video

button from the bottom of the

homepage, and press the key.

Cellular Video 42

3.

From

Customize Cellular Video ➔ Options ➔ Parental

Controls

, press the key.

4. Highlight the

OK

button and press the key to access

the MEdia Net parental setup fields.

5. From the Parental Control Setup screen, use your keypad

to enter information into the following fields:

PIN Code, Re-

enter PIN code

, and

contact email address

.

6. Use the Navigation keys to highlight the

Save

button and

press the key. Allow a few minutes for your

information to be received and accepted by MEdia Net. You

can then use this information to activate the parental

filters.

Configuring the Filters

1. At the Idle screen, press the

Menu ➔ TV and Video ➔

Cellular Video

, and press the key.

2. Use the

Up

or

Down

Navigation key to highlight the

Customize Cellular Video

button from the bottom of the

homepage and press the key.

3. Highlight the

OK

button and press the key.

4. When prompted, enter the PIN and e-mail address which

was registered with MEdia Net in the previous section.

5. Highlight

Content Filters

and press the key.

6. Highlight the

On

button and press the key to toggle the

On/Off

state.

7. Highlight

Purchase Blocker

and press the key.

8. Highlight the

On

button and press the key to toggle the

On/Off

state.

9. Press the

Back

soft key or the key. This activates the

filters.

43

Section 6: Entering Text

This section outlines how to select the desired text input mode
when entering characters into your phone. This section also
describes how to use the T9 predictive text entry system to
reduce the amount of key strokes associated with entering text.

Text Input Modes

The Text Input option switches the key entry functions from an T9
Alphabet, ABC (Alphabet), Numeric Mode, and Symbols Mode.

T9 Input Method (T9 abc, T9 Abc, and T9 ABC)

This input method allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, pressing the key can enter J, K, or L.
However, the T9 method automatically compares the series of
keystrokes you make with an internal linguistic dictionary to
determine the most likely word, thus requiring far fewer
keystrokes than the traditional Alphabet mode. The T9 abc
method makes all characters lowercase. The T9 Abc method
makes the initial character an uppercase while the remaining
characters are left as lowercase. The T9 ABC method makes all
characters uppercase.

䊳

To select the T9 Input method, select

Menu ➔ Messaging ➔

Create New Message ➔ Options ➔ Input Method

.

ABC (Alphabet) Input Method (Abc, abc, and ABC)

This input method allows you to enter letters by pressing the key
labeled with the letter you want. Press the key once, twice, three,
or four times until the correct letter displays. The Abc mode
makes only the initial character of the word uppercase. The abc
method makes all characters of the word lowercase. The ABC
method makes all characters of the word uppercase.

䊳

To select the Alphabetic method, select

Menu ➔ Messaging ➔

Create New Message ➔ Options ➔ Input Method

.

Numeric

This mode allows you to enter numbers.

䊳

To select the Numeric Input method, select

Menu ➔ Messaging

➔

Create New Message

and press the key until the

numeric input ( ) displays on the top line of the message

input screen.

1 2 3

Entering Text 44

Symbols

This mode allows you to enter symbols, such as punctuation
marks.

䊳

To select the Symbolic input method, select

Menu ➔ Messaging

➔

Create New Message,

and press and hold the key until

the symbol grid displays on the message input screen.

Changing the Text Input Mode

When you are in a field that allows characters to be entered (such
as in a text message), the input mode indicator displays on the
screen.

1. To change the input mode from within a text or multimedia

message, press the

Options

soft key.

2. Highlight

Input Method

and press the key. The default

mode is Abc.

3. Choose from the following options:

4. You may also access Symbol mode by pressing and

holding the key. Press the number key corresponding

to the symbol you want to enter. Use the Up and

Down

Navigation keys to scroll through the available symbols.

Press the

Cancel

soft key to exit.

abc

input is in all lowercase

Abc

input is in initial capitalization

ABC

input is in all uppercase

T9

Predictive Text: input method is based on a built­in dictionary.

T9 abc

Predictive Text: completed words are all
lowercase.

T9 Abc

Predictive Text: completed words are all initial
capitalization.

T9 ABC

Predictive Text: completed words are all
uppercase.

Numeric

input is in all numeric format.

Symbols

activates the Symbols grid for you to select your
input.

45

Using the T9 Input Method

T9 Predictive Text input method is based on a built-in dictionary.

Enter a Word in T9 Mode

1. In T9 method, begin entering a word by pressing the

through keys. Press each key only once for

each letter. The built-in dictionary lists words that match

the keystrokes you have entered.

Example: To enter “Hello”, press

, , , ,

The word that you are typing displays on the screen. It may

change with each key that you press.

2. Enter the whole word before editing or deleting the

keystrokes.

3. When the word displays correctly, go to step 4.

If the word doesn’t display correctly, press the key

to display alternative word choices for the keys that you

have pressed.

Example:

Both “Of” and “Me” use the and keys. The phone
displays the most commonly used choice first.

4. Insert a space by pressing the key and start entering

the next word.

Add a New Word into the T9 Dictionary

1. After pressing the keys corresponding to the word you

want to add, press the key to display the alternative

words.

2. When the last alternative word displays,

Spell

displays.

Press the

Spell

soft key.

3. Enter the word you want to add using the ABC mode.

4. Press the

Add

soft key or the key.

The word is added to the T9 dictionary and becomes the

first word for the associated keypress series.

Note:

This feature may not be available for some languages.

•

To enter periods, hyphens, colons, or parenthesis, press and hold the

key to access the symbols popup menu.

•

T9 mode applies grammar rules to ensure that correct punctuation is

used.

Entering Text 46

•

To shift case in T9 mode, use the key. There are 4 cases: Initial
capital, Capital lock, Lower case, and Numeric.

•

You can move the cursor by using the

Left

and

Right

Navigation keys.
To delete letters, press the key. Press and hold the key
to clear the display.

Using the Alphabet Input Method

To use the ABC Alphabet input method use the through

keys to enter your text.

1. Press the key labeled with the letter you want:

•

Once for the first letter

•

Twice for the second letter

•

And so on

2. Select the other letters in the same way.

Note:

The cursor moves to the right when you press a key. When entering the
same letter twice or a different letter on the same key, just wait for a
few seconds for the cursor to move to the right automatically, and then
select the next letter.

Keys

Using the Symbols Input Method

The Symbol input method enables you to insert symbols and
punctuation marks into text.

1. To enter symbol mode press and hold the key.

2. Use the Navigation keys to select an on-screen symbol

group.

. , ’ - ? ! @ : / 1

A

B C Ä Å Æ Ç 2 a b c ä à å æ ç 2

D E F É ∆ Φ 3 d e f è é Φ 3
G H I Γ 4 g h i ì Γ 4

J K L Λ 5 j k l Λ 5

M N O Ñ Ö Ø Ω 6 m n o ñ ö ò ø Ω 6

P Q R S П Σ Ψ 7 p q r s β Σ Ψ 7

T U V Ü θ 8 t u v ü ù 8

W X Y Z Ξ 9 w x y z Ξ 9
+ = < > € £ $ % & ¥ ¤ 0

47

3.

To select a symbol from that group, press the

corresponding number key.

4. To clear the symbol(s), press the key. When the

input field is empty, this key returns the display to the

previous mode.

5. To return to your message, press the

OK

soft key or the

key.

Using the Numeric Input Method

The Numeric mode enables you to enter numbers into a text
message. To enter Numeric input mode, press the key until

123

displays in the input method. Press the keys corresponding

to the digits you want to enter.

Messaging 48

Section 7: Messaging

This section describes how to send or receive different types of
messages. It also includes the features and functionality
associated with messaging.

Types of Messages

Your phone provides the following message types:

•

IM Messages

•

Mobile Email

•

Text Messages

•

Multimedia Messages

Display Icons for Messages

When new messages are received on your handset, icons appear
in two locations on the phone display: in the View Tab that
appears on your screen, and in the icon bar at the top of the
display (see “Display Layout” on page 14.).

For more information on the View Tab, see “View Tab” on
page 23.

Message Icons on the Icon Bar

On the icon bar at the top of the display, a new voice mail is
indicated by the icon. A new text message is indicated by
the icon. A new multimedia message is indicated by the

icon.

Message Icons in the Inbox

Within the Inbox, the Text Message icon ( ) displays in the
Messaging Inbox when you have received new text messages
and saved it to the SIM. The Text Message icon ( ) displays
when the message has been saved to the Phone. When the
memory is full, an error message displays and you cannot
receive any new messages. Use the

Delete

option in each

message box to delete obsolete messages.

The Multimedia Message icon ( ) displays when you have
received new multimedia messages. When the memory is full, an
error message displays and you cannot receive any new
messages. Use the

Delete

option in each message box to delete

Multimedia messages.

49

Creating and Sending Text Messages

The Short Message Service (SMS) allows you to send and receive
short text messages to and from other mobile phones. To use this
feature, you must subscribe to your service provider’s message
service.

Creating a New Text Message

1. At the Idle screen, press

Menu ➔ Messaging ➔ Create New

Message

, and press the key. You may also press the

Up

Navigation key to go directly to the Create New

Message screen.

2. Enter either a phone number or contact name (from your

Address Book) by pressing the key to access both a

list of recent calls and your Address Book Contacts and

Groups.

• Recent Log

: allows you to choose from a brief list of recent
contacts. Press the key to add a selected number to your
message’s recipients list field. This entry can later be appended
prior to sending the message.

•Contacts

: allows you to insert additional recipients from your

Address Book by using your Up and

Down

Navigation keys to

select those entries you wish to add.

–

Press the key to place a check mark next to those entries.

–

Once you have selected the desired entries, press the

Done

soft key to

return to the message.

• Groups

: allows you to insert additional Group members from your

Address Book by using your Up and

Down

Navigation keys to

select those entries you wish to add.

3. Use the

Down

Navigation key to access the text field and

begin creating your text message.

4. Press the

Options

soft key when you have finished writing

your message. Choose from the following options:

•Send

: allows you to send the message.

•Text

: allows you to highlight the text inserted, then set the Text
Selection on or off, Cut previously entered text, Copy text, or
Remove text before sending.

• Add Item

: allows you to add an image, sound or video clip to your

message.

Note:

If you add an image, sound clip, or video clip to your message, the
message is sent as a Multimedia Message.

•Create Item

: allows you to temporarily exit from the current text
message and create either a new photo, video clip, or audio clip for
your current text message.

–

Tak e Ph oto

: allows you to temporarily exit the message, take a photo

with phone’s camera, and then add it to your message.

Messaging 50

–

Record Audio

: allows you to temporarily exit the message, record an
audio clip using the phone’s microphone, and then add it to your
message.

–

Record Video:

allows you to temporarily exit the message, record a

video clip using the phone’s camera, and then add it to your message.

•Insert

: allows you to insert a predefined Text template, Text

emoticon, Address Book, or favorite web address into the message.

–

Text Template

: allows you to insert one of the preset message

templates to the text, such as Out of Office, I’m in a meeting..., etc.

–

Text Emoticon

: allows you to add an a emotion (created by phone
characters) to your message. An example would be: which
creates a “happy face”.

–

Address Book

: allows you to add contact information for an entry from

your Address Book directly to your message.

–

Favorites

: allows you to add a web address from your Favorites list of

Internet sites to the message.

• Add Recipients

: allows you to update the recipient list by
appending it with information from either your Recent Log,
Contacts, or Groups entries.

• Change to Multimedia Message

: allows you to convert the current
message to/from either a text or multimedia message prior to being
sent.

Note:

A multimedia message should only be sent to a phone which can
support the receipt and display of this message type.

• Input Language

: allows you to temporarily change the input

language used to create your message.

• Input Method

: allows you to change the method used to input data
into your message, such as text, numbers, and symbols. For more
information, refer to

“Entering Text”

on page 43.

• Add Attachment

: allows you to add either a file, card, or other

information such as a calendar entry, task, or note.

–

File

: allows you to insert an audio, graphic, or video clip to your

message as an attached file.

–

Business Card

: allows you to insert the contact information for an

entry from Address Book directly to your message as an attached file.

–

Appointment

: allows you to insert an Appointment entry from your

calendar directly to your message as an attached file.

–

Anniversary

: allows you to insert an Anniversary entry from your

calendar directly to your message as an attached file.

–

Private

: allows you to insert a Private entry from your calendar directly

to your message as an attached file.

–

Holiday

: allows you to insert a Holiday entry from your calendar directly

to your message as an attached file.

–

Important

: allows you to insert an entry from your calendar tagged as

Important directly to your message as an attached file.

–

Ta sk s

: allows you to insert an entry from your calendar tagged as a

Task directly to your message as an attached file.

–

Notes

: allows you to insert a presaved Note (text) directly to your

message as an attached file.

51

–

Favorites

: allows you to add a web address from your Favorites list of

Internet sites as an attachment to the message.

• Sending Options:

allows you to save a copy or adjust your Text

Message Center Settings.

• Save to Drafts

: allows you to save the message to the Drafts folder.

• Save as Template

: allows you to save the message as a text

template.

•Back

: allows you to return to the active message.

5. Press the

Send To

soft key and confirm the recipient(s). You

can add additional recipients from your Address Book by

selecting one of the

Empty

fields and pressing the key.

•

Add additional recipients from your Address Book by using your Up
and

Down

Navigation keys to select those entries you wish to add.

•

Press the key to place a checkmark next to those entries.

•

Once you have selected the desired entries, press the

Done

soft

key to return to the previous list of Recipients.

6. Send the message to the selected recipients by pressing

the

Send

soft key. You may also use the

Options

soft key to

select

Save to Draft

.

Creating and Sending Multimedia Messages

The Multimedia Messaging Service allows you to send and
receive multimedia messages to and from other mobile phones.

To use this feature, you must subscribe to your service provider’s
multimedia message service.

1. At the Idle screen, select

Menu ➔ Messaging ➔ Create New

Message

, and press the key. You may also press the

Up

Navigation key to go directly to the Create New

Message screen.

2. Enter either a phone number or contact a contact name

(from your Address Book) by pressing the key to

access both a list of recent calls and your Address Book

Contacts and Groups.

• Recent Log

: allows you to choose from a brief list of recent

contacts. Press the key to add a selected number to your
message’s recipients list field. This entry can later be appended
prior to sending the message.

•Contacts

: allows you to insert additional recipients from your

Address Book by using your Up and

Down

Navigation keys to

select those entries you wish to add.

–

Press the key to place a checkmark next to those entries.

–

Once you have selected the desired entries, press the

Done

soft key to

return to the message.

• Groups

: allows you to insert additional Group members from your

Address Book by using your Up and

Down

Navigation keys to

select those entries you wish to add.

Messaging 52

3.

Use the

Down

Navigation key to access the text field and

begin creating your message.

4. Select

Options ➔ Change to Multimedia Message

and press

the key.

Note:

A multimedia message should only be sent to a phone which can
support the receipt and display of this message type.

5. Add an Image, Sound, or Video clip directly into your

message by pressing the

Options

soft key and selecting

from one of the following options:

•Send

: allows you to send the message.

•Preview

: allows you to preview your message prior to being sent.

•Text

: allows you to enter, cut, copy, and remove text from your

message prior to being sent.

• Add Item

: allows you to add an image, sound or video clip to your

message.

•Create Item

: allows you to temporarily exit from the current text
message and create either a new photo, video clip, or audio clip for
your current text message.

–

Tak e Pho to

: allows you to temporarily exit the message, take a photo

with phone’s camera, and then add it to your message.

–

Record Audio

: allows you to temporarily exit the message, record an
audio clip using the phone’s microphone, and then add it to your
message.

–

Record Video

: allows you to temporarily exit the message, record a

video clip using the phone’s camera, and then add it to your message.

•Insert

: allows you to insert a predefined Text template, Text
emoticon, Address Book entry, or favorite web address into the
message.

–

Text Template

: allows you to insert one of the preset message

templates to the text, such as Out of Office, I’m in a meeting..., etc.

–

Text Emoticon

: allows you to add an a emotion (created by phone
characters) to your message. An example would be: which
creates a “happy face”.

–

Address Book

: allows you to add the information for an entry from
your Address Book directly into your message.

–

Favor ites

: allows you to add a web address from your Favorites list of

Internet sites to the message.

• Add Recipients

: allows you to update the recipient list by
appending it with information form either your Recent Log,
Contacts, or Group entries.

• Change to Text Message

: allows you to convert the multimedia
message back to a text-based message which deletes the attached
multimedia files

• Add Page

: allows you to add a text page to your multimedia

message.

53

• Input Language

: allows you to change the language used for the

message text.

• Input Method

: allows you to change the method used to input data
into your message, such as text, numbers, and symbols.For more
information, refer to

“Entering Text”

on page 43.

•Edit Style

: allows you to edit the style of your outgoing message
with option such as: Select page, Background Color, Page Duration
(for embedded media), Font Color, and Font Style.

• Add Subject

: allows you to add a subject header to your

multimedia message.

• Add Attachment

: allows you to add either a file, card, or other

information such as a calendar entry, task, or note.

–

File

: allows you to insert an audio, graphic, or video clip to your

message as an attached file.

–

Business Card

: allows you to insert the contact information for an

entry from Address Book directly to your message as an attached file.

–

Appointment

: allows you to insert an Appointment entry from your

calendar directly to your message as an attached file.

–

Anniversary

: allows you to insert an Anniversary entry from your

calendar directly to your message as an attached file.

–

Private

: allows you to insert a Private entry from your calendar directly

to your message as an attached file.

–

Holiday

: allows you to insert a Holiday entry from your calendar directly

to your message as an attached file.

–

Important

: allows you to insert an entry from your calendar tagged as

Important directly to your message as an attached file.

–

Tas ks

: allows you to insert a Task directly to your message as an

attached file.

–

Notes

: allows you to insert a presaved Note (text) directly to your

message as an attached file.

–

Favorites

: allows you to add a web address from your Favorites list of

Internet sites as an attachment to the message.

• Sending Options:

allows you to configure the options associated

with sending the message.

• Save to Drafts

: saves the current message to the Drafts folder.

• Save as Template

: allows you to save the current text message or
multimedia message to the current list of preset message
templates, such as Out of Office, I’m in a meeting..., etc.

•Back

: allows you to return to the active message.

6. Press the

Send To

soft key and confirm the recipient(s). You

can add additional recipients from your Address Book by

selecting one of the Empty fields and pressing the

key.

•

Add the additional recipients from your Address Book by using your

Up

and

Down

Navigation keys to select those entries you wish to

add.

•

Press the key to place a checkmark next to those entries.

•

Once you have selected the desired entries, press the

Done

soft

key to return to the previous list of Recipients.

Messaging 54

7.

Send the message to the selected recipients by pressing

the

Send

soft key. You may also use the

Options

soft key to

select

Save to Drafts

.

Locating a Message

䊳

In Idle mode, press the

Menu

➔ Messaging ➔ Inbox

and press

the

Select

soft key. The message list opens.

Retrieving a Text Message

Within the Inbox, the Text Message icon ( ) displays in the
Messaging Inbox when you have received new text messages
and saved it to the SIM. The Text Message icon ( ) displays
when the message has been saved to the Phone.

1. To view a message, select

Menu

➔ Messaging ➔ Inbox

and

press the

Select

soft key. The message list opens.

2. Use the

Up

or

Down

Navigation keys to select the message.

3. Press the key to open the message.

4. Press the key to return to Idle mode when you are

finished.

Retrieving a Multimedia Message

When a new Multimedia message comes in, the display in the
Inbox shows a new Multimedia Message notification icon ( )
along with the available sender’s information.

1. To view a message, select

Menu

➔ Messaging ➔ Inbox

and

press the

Select

soft key. The message list opens.

2. Use the

Up

or

Down

Navigation keys to select a message

from the list.

3. To review the multimedia message, press the key. If a

video clip is a part of the message, the following options

can be used:

•

To pause the audio/video clip, press the key.

•

To stop the audio/video clip press the

Stop soft key.

4. To scroll through the message (if additional pages have

been added), press the Up or

Down

Navigation key.

5. Select

Options ➔ Properties

, and press the key to view

brief information about the message, such as the sender’s

number, the message size, and the subject.

6. Press the key to return to Idle mode when you are

finished.

55

Using Message Options

While viewing the content of a message, press the

Options

soft

key to access the following message options:

Options for SMS Messages

•

Reply

: allows you to reply to the message via Text message.

•

Forward

: allows you to forward the message.

•

Call Back

: allows you to dial the originating message number.

•

Delete

: deletes the message.

•

Move to Phone/Move to SIM

: If a message is stored in the SIM card,
it is saved to the phone’s memory. If a message is stored in the
phone’s memory it is then saved to the SIM card.

•

Save to Address Book

: allows you to save the recipient or sender’s
information from the message to your Address Book on either the
Phone or SIM.

Note:

When storing an Address Book entry into the SIM card, notice that only
the Name, Address, Group, and Slot location are initially displayed. To
save additional information for a particular contact, such as other
phone numbers, or e-mail, it is important to add new information fields
to that Contact.

Important!:

It is important to remember that if you move the SIM card to
another phone that does not support additional fields on the SIM
card that the additional information may not available.

•

Save as Template

: allows you to save the message as a text template.

•

Print via Bluetooth

: allows you to print the message content

wirelessly to a target Bluetooth-compatible printer.

Options for Multimedia Messages

•

View/Play

: allows you to view or play the multimedia message.

•

Reply

: allows you to reply to the message.

•

Reply to All

: allows you to reply to the all recipients of the message.

•

Forward

: allows you to forward the message to another person.

•

Call Back

: allows you to dial the originating message number.

•

Delete

: allows you to delete the selected or all messages.

•

Move to My Folder

: moves the message to the phone’s My Folder

location.

•

Save as Template

: saves to the message as a template for this
message type. This template can be used to save time during the
creation of the next similar message.

•

Save Items

: saves the multimedia content to the My Stuff folder.

•

Save to Address Book

: allows you to save the recipient or sender’s
information from the message to your Address Book on either the
Phone or SIM.

•

Print via Bluetooth

: allows you print the contents of the message on a

Bluetooth compatible printer.

•

Lock

: locks the message.

•

Properties

: displays some of the file properties for the message such

as: sender, date/time, file size, priority, etc.

Messaging 56

Using Instant Messenger (IM)

The Instant Messenger function allows you to send and receive
instant messages using AIM, Windows Live, and Yahoo
communities. You must first create a default community account
before accessing it on your phone.

Default Community Settings

To access your default community session settings:

1. At the Idle screen, press the

Menu ➔ Messaging ➔ IM

, and

press the key.

2. Select

Settings

and press the

key.

3. Select

Choose Your Community

and press the key. This

is the service that loads when you press the IM soft key.

4. Use the Navigation keys to highlight your option, and press

the key to save your selection.

Signing into Your IM Account

Although each account type differs, the initial sign in procedure is
common to all supported types. Before beginning the sign in
procedure, you must complete the previous procedures for
selecting your default IM Community.

1. At the Idle screen, select

Menu ➔ Messaging ➔ IM

➔ Sign

In/On

, and press the key.

2. Use the Navigation keys to select each log in field and then

use the keypad to enter the appropriate information.

3. Select

Options ➔ Sign In/On

, and press the key.

Signing into Your Mobile Email

Take your e-mail with you! With Mobile Email you can check your
Yahoo!® Mail, AOL®, AIM, Windows Live Mail, AT&T Yahoo!®,
BellSouth, and other providers quickly and easily.

1. At the Idle screen, press the

Menu

➔ Messaging ➔ Mobile

Email

, and press the key.

2. Use the Navigation keys to select an e-mail carrier of your

choice and press the key.

3. Use the Navigation keys to select which domain your

personal account uses (e.g., "@hotmail.com") and press

the key.

4. Type in your personal Email address (e.g., "silverfox2"),

then enter your account's Password and press the

Sign In/

On

soft key. You are connected to your account's Inbox and

contacts, where you can send and receive e-mails.

57

Using Message Templates

Your phone has message templates (both SMS and MMS) which
allows you to retrieve them when creating a message. You can
change the templates as your preferences or send a message
immediately.

1. At the Idle screen, select

Menu ➔ Messaging ➔ Templates

,

and press the key.

2. Highlight a template type (Text or Multimedia) and press

the key.

3. Use the

Up

or

Down

Navigation keys to select a current

template message and press the

Options

soft key to

access the following options:

•Edit

: allows you to change the currently selected template.

• Insert to Message

: allows you to insert the selected template into a

new text message.

• Add New

: allows you to add a new the template.

• Delete

: deletes the currently selected template or all templates.

4. Press the key to return to Idle mode when you are

finished.

Deleting Messages

You can delete the messages in each message folder(s)
individually or all at one time. You can also delete all of your
messages at one time.

1. At the Idle screen, select

Menu ➔ Messaging ➔ Delete All

,

and press the key.

2. Using the

Up

or

Down

Navigation keys to select the

message folder(s) you want to empty.

3. Press the key to mark the folder you want to delete.

•All

: allows you select all of the list items and mark each one for

content deletion.

• Inbox

: allows you select the your Inbox folder and mark its files for

deletion.

•Sent

: allows you select the your Sent folder and mark its files for

deletion.

• Outbox

: allows you select the your Outbox folder and mark its files

for deletion.

• Drafts

: allows you select the your Drafts folder and mark its files for

deletion.

•My Folder

: allows you select the your My Folder and mark its files

for deletion.

Messaging 58

To view the contents in each folder, use the

Right

key to

display the folder’s contents or use the

Left

key to close the

folder’s contents.

4. To delete all of the messages in all folders, select

All

.

5. Press the

Delete

soft key. At the “Delete?” pop-up, press

the

Ye s

soft key or the key to delete.

6. Press the key to return to Idle mode when you are

finished.

Messaging Settings

You can set up various options for using messaging services.

1. At the Idle screen, select

Menu ➔ Messaging ➔ Messaging

Settings

, and press the key.

2. Select the type of messages that you want to change

settings.

•Text Message

• Multimedia Message

• Voice Mail

• Push Message

• Broadcast* (SIM-dependent)

3. Press the key.

Text Message

The following options are available:

•

Sending Options

: allows you to set the following options:

–

Keep a Copy

: allows you to keep a copy of your sent messages.

•

Text Message Center Settings

: allows you to set the default method
of text message transmission used by the Text Message Center. The
options are:

–

SMS Settings

: allows you to configure the text delivery parameters

used when sending this type of message.

–

Email Settings

: allows you to configure the Email parameters used

when sending this type of message.

–

Empty

: allows you to configure a new Text Message Center profile for

use when sending this type of message.

Multimedia Message

The following options are available:

•

Sending Options

:

–

Priority

: you can select the priority level of your messages.

–

Expiration

: select the length of time you wish the message you sent to

remain on the MMS server.

–

Delivery

: you can set a time delay before the phone sends your

messages.

–

Size

: you can set the maximum allowed size for a multimedia

message.

–

Request Delivery Report

: when this option is enabled, the network

informs you whether or not your message was delivered.

59

–

Request Read Report

: when this option is enabled, your phone sends

a request for a reply along with your message to the recipient.

–

Keep a Copy

: you specify whether you want to keep a copy of the sent

messages on your phone.

–

Add My Business Card

: you send your content information along with

your sent messages.

•

Receiving Options

: you can specify the category of messages you

want to receive. Allows you to set the following:

–

Download Type

: allows you to set the message receipt options.

Choose from Auto Download, Manual, or Reject.

–

Send Delivery Report

: when this option is enabled, the phone allow
the network report to the sender whether or not the message was
delivered.

–

Send Read Report

: when this option is enabled, your phone sends a
notification back to the recipient indicating that your message was
read.

–

Reject Anonymous

: allows you to automatically reject messages with

a category of anonymous.

–

Reject Advertisement

: allows you to automatically reject messages

with a category of advertisement.

•

Multimedia Message Profiles

: you can select a connection profile

which is then used for sending and receiving Multimedia messages.

–

MMS Profiles

: allows you to select an option for sending a multimedia

message. Choose from the following options:

•

MEdia Net

•

AT&T M MS

•

AT&T I MS

–

Profile Settings

(accessed by pressing the

Options

soft key and

selecting

Edit

):

•

Set Name

•

Access Name

•

Auth Type

•

User ID

•

Password

•

Protocol

•

Home URL

•

Proxy address

•

Linger Time (Sec.)

•

Advanced Settings (Static IP, Static DNS, and Traffic Class)

–

Auto Resize Image

: you can specify that the received image by be

resized up/down:

•

No Resize

•

100 KB

•

300 KB

•

600 KB

–

Creation Mode

: you can specify that the users creating new media

content be given the following options:

•

Warning

•

Free

•

Restricted

–

Default Style

: you can specify the default visual parameters used by

this type of message:

Messaging 60

•

Font Color

•

Font Style

•

Background Color

•

Page Duration

Voice Mail

The following options are available:

•

Voicemail

: you can specify the default phone number used for access

of the phone’s remote Voicemail Server. If you select the

Edit

soft key,

the following fields display:

–

Name

: allows you to create a new descriptive name for this access

number.

–

Center Address

: allows you edit the existing number and create a new

number for use when accessing the remote Voicemail Server.

Important!:

Changing the Voicemail Center Address can affect your ability to
access your voice mail. Check with your provider’s Customer
Service before changing.

Push Message

Push Messages are service provider-sent messages, that include
software upgrades or general information messages.

The following options are available:

•

Receiving Option

: you can specify whether to turn push message

reception On or Off.

•

Service Loading

: you can specify whether to load this service:

–

Always

–

Prompt

–

Never

Memory Status

You can check the amount of the memory being used and the
memory remaining for Multimedia, Text, Push, and Configuration
Messages. The display shows the total space including the used
and free space. You can also view how much space is currently
occupied by each message box.

1. At the Idle screen, select

Menu ➔ Messaging ➔Memory

Status

, and press the key.

2. Use your

Up, Down, Left

or

Right

Navigation keys to select

a particular folder for review.

3. Press the key. The contents of that folder are then

listed.

4. Press the key to return to Idle mode when you are

finished.

61

Section 8: MEdia Net and WAP

Your phone is equipped with a WAP (Wireless Application
Protocol) browser which allows you to access the Internet. This
section explains how to access the WAP services of your service
provider and navigate the WAP browser.

Accessing the MEdia Net Home

1. In Idle mode, press the key to launch the WAP

browser. You can also select

Menu ➔ MEdia Net ➔ MEdia

Net Home

, and press the key.

Your phone is connected to the network and loads the

MEdia Net homepage. The content of the start-up

homepage contains the following selections:

• Search field

: allows you enter a text string into the field and then
search the MEdia Net database for matches. Once you have
entered a word, press the

Right

Navigation key to select the

Search

button and press the key to begin your search.

•My Links

: provides you with quick access to your those sites which
you have setup in this category. Highlight one of these entries and
press the key to launch that web page.

•Categories

: provides you with a list of MEdia Net web pages

containing links to a variety of special interest sites. Highlight a

selection from this list and press the key. These categories
can be edited from within Customize MEdia Net.

Important!:

Prior to using MEdia Net services, you must complete the
registration process located at: att.com/wireless. Some services
require you to agree to the terms of a service agreement and
setup the service on your handset.

• My Account

: provides you with access to a listing of your most
recent purchases and available product (services). From the My
Account screen, highlight

My Purchases

and press the key to

begin.

• Customize MEdia Net

: provides you with a list of MEdia Net setup
and service options which allow you to configure different aspects
of the MEdia Net experience. Highlight a selection from this list and
press the key.

–

Edit My Links

: provides you with a list of available Internet links which
you can choose to add to your My Links section of the main Media Net
homepage. To add a link, navigate to the Add to My Links section,
highlight an entry, and press the key. To remove a link, navigate to
the Move/Delete Links section, highlight an entry, and press the
key. From the Edit My Links page, highlight

Remove

, and press the

key.

–

Edit Categories

: allows you to edit those category entries which
appear on the MEdia Net homepage. Although the first four entries
(WHAT’S HOT, Tones, Games, Pics, and Cellular Video) can not be

MEdia Net and WAP 62

removed, the remaining entries can be toggled on or off. Highlight a
category entry and press the key to toggle it on (appear on the
page) or off (remove it from the homepage).

–

Parental Control

: provides you with settings which can be configured
to restrict certain media content from being downloaded on the phone.
For more information, refer to

“Parental Controls”

on page 41.

–

Username & Password

: allows you to setup a username and
password prior to gaining access to the MEdia Net homepage and
related services.

Important!:

Prior to using this service you must agree to the terms of the
service agreement and setup the service on your handset.

–

MEdia Net Mail

: allows you to access and edit the entries found within
the MEdia Net messaging center. Although most of the entries can not
be removed, the remaining entries can be toggled on or off by
navigation to the top of the page, highlight

Edit

, and press the

key. From the Mail & Messaging page, highlight an entry and press the

key to toggle it on (appears on the Mail & Messaging page) or off

(remove it from the Mail & Messaging page).

–

MEdia Net Tour

: allows you to take a quick guided tour through the
main features of the MEdia Net pages (homepage, navigation, teams,
etc.).

–

Privacy Policy

: provides the web address for the Privacy Policy.

•Help

: provides you with list of some of the most frequently asked
questions regarding MEdia Net functionality. Highlight a question
and press the key to launch an on screen description

2. To scroll through the screen, use the

Up

and

Down

Navigation keys.

3. To exit the browser at any time, simply press the

key.

Accessing a MEdia Net Site

There are several ways to access a WAP site:

•

Selecting a link on the browser

•

Using a bookmark item in the Favorites folder; use the Bookmarks
option on the browser menu list or Favorites menu.

•

Entering a URL address manually; use the Go to URL option on the
browser menu list.

Navigating with the WAP Browser

1. To scroll through browser items, press the

Up

or

Down

Navigation keys.

2. To select a browser item, highlight a MEdia Net entry and

press the key or press the

Options

soft key and

choose

Select

.

3. To return to the previous page, press the key, or

press the

Options

soft key and choose

Back

.

4. To access the browser menu list, press the

Menu

soft key.

63

5.

To return to the start-up homepage, select

Menu ➔ Home

option and press the key.

Entering Text in the WAP Browser

When you are prompted to enter text, the currently active text
input mode is indicated on the screen.

1. Select the text field (such as the

Search

field) by pressing

the key.

The default text entry mode displays on the Icon bar.

2. To change the text entry mode, press the key until

the mode you want displays.

The following modes are available:

• Upper-Case Alphabet Mode (ABC)

: allows you to enter upper-

case characters.

• Lower-Case Alphabet Mode (abc)

: allows you to enter lower-case

characters.

Note:

In upper or lower case alphabet mode, press the 1 key to access the
symbols menu.

• T9 Mode (T9)

: allows you to enter characters by pressing one key
per letter. In this mode, you can use only the 0 key to display
alternative words. To change case, press and hold the * key.

• Number Mode (123)

: allows you to enter numbers.

Selecting and Using Menu Options

Various options are available when you are using the WAP
Browser to navigate the Wireless Web.

To access a option, press the

Options

soft key. A menu list

displays.

Note:

The menus may vary, depending on your version of the WAP Browser.

The following options are available:

•

Go

: lets you navigate Forward (next sequenced web page) or
Backward (to the previously visited web page) through pages in your
browsing history.

•

Reload

: reloads the current page with updated information.

•

Smart-Fit View/Desktop View:

changes the display mode of the

browser.

•

Page Size

: change the page size of the displayed web page using a

scroll bar.

•

Go to Homepage

: takes you back at any time to the homepage of the

Wireless Web service provider.

•

Add to Favorites

: bookmarks the current page and marks it as a

favorite site.

•

View Favorites

: accesses and displays the bookmarks assigned as

favorite web pages.

MEdia Net and WAP 64

•

Send URL via

: send the URL of the current page via either a message

or to another party via a Bluetooth device.

•

Enter URL

: allows you to manually enter the URL address of a WAP
site. After entering an address, press the OK soft key to go there
directly.

•

Copy URL to Message

: send the URL of the current page to another

party as a message.

•

Save

: saves either the image of the current web page or the current

page itself.

•

Saved Pages

: access the list of web pages you have saved.

•

History

: displays the list of web pages you have recently accessed.

•

Advanced

: allows you to change the following settings for the
browser.

–

Clear Caches

: deletes the information stored in the cache. The cache

stores the most recently accessed pages.

–

Empty Cookies

: delete cookies. Cookies are pieces of personal

information sent to a web server while navigating the web.

–

Cookie Options

: sets whether or not cookies are stored on your phone.
If you select Prompt, the phone prompts you to save the cookies on
every page that requires cookies.

–

Preferences

: changes the settings for the web browser to suit your

preference.

–

Certificates

: accesses certificate information from your phone.

–

Page Details

: displays the properties for the currently active web page.

–

Browser Settings

: selects a connection profile to be used when

connecting to the Internet.

–

About Browser

: displays the access version and copyright information

about the browser.

Using Favorites

While navigating through either the Internet or the MEdia Net
pages, you can bookmark a site to quickly and easily access it at
a future time. The URL addresses of the bookmarked sites are
stored in the Favorites folder, wherein you can either use the 6­preset URL addresses or store your own favorite URL addresses.

Accessing a WAP Site Using Favorites

1. At the Idle screen, select

Menu ➔ MEdia Net ➔ Favorites

and press the key.

2. Select a bookmark item on the

Favorite

list. The preset

URLs consist of:

• Cellular Video

•Chat

•News

•Sports

•Weather

• MEdia Net (homepage)

65

3.

Press the

Options

soft key to select

Go to

or press the

key.

Storing a URL Address as a Favorite

1. At the Idle screen, select

Menu ➔ MEdia Net ➔ Enter URL

and press the key.

2. Enter the URL address and press the key to launch the

web page.

Tip:

Use can use the key to cycle through that available symbols and
choose the “.” (period) and the “@” (at) needed for most website
addresses.

3. Press the

Options

soft key, and use the

Down

Navigation

key, highlight

Add to Favorites

and press the key.

4. Press the

Go to

soft key to launch the website.

5. Press the key to return to Idle mode when you are

finished.

Editing Favorites

1. From the

Favorites

list, select the bookmark you want to

change.

2. Press the

Options

soft key, highlight

Edit Favorites

and

press the key.

3. Change the address and the name, as you would when

storing a new one.

4. Press the

Save

soft key.

5. Press the key to return to Idle mode when you are

finished.

Deleting Favorites

1. From the

Favorites

list, select the bookmark you want to

delete.

2. Press

Options

soft key, highlight

Delete

and press the

key.

3. Highlight

Selected

and press the key.

4. Press the

Ye s

soft key or the key to confirm the

deletion.

5. Press the key to return to Idle mode when you are

finished.

MEdia Net and WAP 66

Using your History

The History list provides you with a list of the most recently
visited web sites. These entries can be used to return to
previously unmarked web pages.

1. At the Idle screen, select

Menu

➔ MEdia Net ➔ History

and

press the key.

2. Use the

Up

or

Down

Navigation key to highlight an entry

from the list.

3. Press the

Options

soft key, highlight

Go to

and press the

key.

4. Press the key to exit from the browser when you

are finished.

Clearing Caches

A cache is the phone’s temporary memory in which the most
recently accessed web pages are stored. You can clear the
caches at anytime.

1. At the Idle screen, select

Menu ➔ MEdia Net

➔ Advanced

➔

Clear Caches

and press the key.

2. Press the

Ye s

soft key or the key to confirm the

deletion.

3. Press the key to return to Idle mode when you are

finished.

Clearing the Cookies

A cookie is a small file which is placed on your phone by a web
site during navigation. In addition to containing some site­specific information, it can also contain some personal
information (such as a username and password) which can pose
a security risk if not properly managed. You can clear this cookies
from your phone at any time.

1. At the Idle screen, select

Menu ➔ MEdia Net ➔ Advanced ➔

Empty Cookies

and press the key.

2. Press the

Yes

soft key or the key to confirm the

deletion.

3. Press the key to return to Idle mode when you are

finished.

Changing the WAP Profiles

Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via any of the available
WAP browsers: MEdia Net, AT&T MMS (MultiMedia Server), or
AT&T IMS. Use this menu to create and customize the profiles
containing the settings for connecting your phone to the network.
You need these settings to use the web browser or send MMS

67

messages or e-mails. Although the active connection can be
changed by the user, it is recommended that this choice be made
with the assistance of either the retailer or customer service
representative.

1. At the Idle screen, select

Menu

➔ MEdia Net ➔ Browser

Settings

, and press the key.

2. Use the

Up

or

Down

Navigation key to highlight one of

these options and press the key:

•MEdia Net

• AT&T MMS

• AT&T IMS

Important!:

The WAP browsers are pre-configured. Your phone is set up by
default for connecting to the network. If you change the settings
without first checking with your service provider, the web
browser, MMS, and e-mail features may not work properly.

3. To create a new connection, press the

Options

soft key,

select

New

, and press the key.

- or -

4. To edit the existing MMS, highlight this entry, press the

Options

soft key, select

Edit

, and press the key.

5. Select the parameter you want to edit:

• Set Name

: enter a profile name.

• Access Name

: edit the access point name.

• Auth Type

: select the type of authentication used for this WAP

connection: None, Normal, or Secure.

•User ID

: enter the User ID required to connect to the network.

• Password

: enter the user password required to connect to the

network.

•Protocol

: set the connection protocol used by the WAP browser:

WAP or HTTP.

•Home URL

: enter the URL address of the page to be used as your

homepage.

• Proxy address

: (HTTP only) set the proxy server address and port.

• Linger Time (Sec.)

: sets a time period (in seconds) after which the

network is disconnected if there is no new data traffic.

• Advanced Settings

: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic
Class.

–

Static IP

: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.

–

Local Phone IP

: enter the IP address obtained from the network

operator, if you checked the Static IP option.

–

Static DNS

: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.

MEdia Net and WAP 68

–

Server 1/Server 2:

enter the Domain Name Server (DNS) addresses.

–

Traffic Class:

select the traffic class.

Note:

The WAP settings may vary depending on the service provider.

69

Section 9: AT&T Mall

The AT&T Mall topics covered in this section are shopping for
Tones, Games, Graphics, Multimedia, Applications, Video, and
Accessing the MEdia Home site.

Your phone has embedded links to the WAP sites providing you
with download services that are preset by your service provider.

Note:

The downloaded content is delivered to you in multimedia messages.
You can retrieve the messages from the server and then save the items
in your phone’s memory. You cannot forward these messages to other
people or add the saved items to a multimedia message.

Shop Tones

The

Shop Tones

menu option allows you to shop for audio tones
using the built-in browser. You can download and save audio to
either your

Audio

or

Music

folder.

To access this menu option:

1. At the Idle screen, select

Menu

➔ AT&T Mall

➔ Shop Tones

and press the key to launch the built-in browser and

select a file to download.

2. Follow the on-screen options. The downloaded files can be

stored in the

Applications, Video, Audio

or

Music

folders

found within the

My Stuff

(Phone) location.

3. Select an audio file and press the key.

4. When you are ready to purchase the audio file, press the

Buy Now

button to complete the transaction.

Shop Games

The

Shop Games

menu option allows you to shop for games using

the built-in browser. You can download new games to your

Games

folder. To access this menu option:

1. At the Idle screen, select

Menu ➔ AT&T Mall ➔ Shop Games

and press the key to launch the built-in browser and

select a game to download.

Follow the on-screen options. The downloaded files can be

stored in the

Games

folder found within the

My Stuff

(Phone) location.

2. Select a game entry and press the key.

3. When you are ready to purchase the game, press the

Buy

Now

button to complete the transaction.

AT&T Mall 70

Shop Graphics

The

Shop Graphics

menu option allows you to shop for graphic
images using the built-in browser. You can download new
images to your

Graphics

folder. To access this menu option:

1. At the Idle screen, select

Menu ➔ AT&T Mall ➔ Shop

Graphics

and press the key to launch the built-in

browser and select an image to download.

2. Follow the on-screen options. The downloaded files can be

stored in the

Graphics

folder found within the

My Stuff

(Phone) location. These images can be used as wallpapers

or included into multimedia messages.

3. Select an image entry and press the key.

4. When you are ready to purchase the image, press the

Buy

Now

button to complete the transaction.

Shop Multimedia Content

The

Shop Multimedia

menu option allows you to shop for
multimedia files using the built-in browser. You can download
new videos to your

Videos

folder. To access this menu option:

1. At the Idle screen, select

Menu ➔ AT&T Mall ➔ Shop

Multimedia

and press the key to launch the built-in

browser and select a video file to download.

2. Follow the on-screen options. The downloaded files can be

stored in the

Video

folder found within the

My Stuff

(Phone)

location. These files can be included into multimedia

messages or sent as attachment files to text messages.

3. Select an video file entry and press the key.

4. When you are ready to purchase the file, press the

Buy

Now

button to complete the transaction.

71

Shop Applications

The

Shop Applications

menu option allows you to shop for
application files using the built-in browser. You can download the
new applications to your

Applications

folder. To access this menu

option:

1. At the Idle screen, select

Menu

➔ AT&T Mall ➔ Shop

Applications

and press the key to launch the built-in

browser and select an application to download.

2. Follow the on-screen options. The downloaded

applications can be stored in the

Applications

folder found

within the

My Stuff

(Phone) location. These files can be

included into multimedia messages or sent as attachment

files to text messages.

3. Select an application file entry and press the key.

4. When you are ready to purchase the application, press the

Buy Now

button to complete the transaction.

Shop Video

The Shop Video menu option allows you to shop for video files
using the built-in browser. You can download the videos to you
Videos folder. To access this menu option:

1. At the Idle screen, select

Menu

➔ AT&T Mall ➔ Shop Video

and press the key to launch the built-in browser and

select a video to download.

2. Follow the on-screen options. The downloaded video can

be stored in the

Videos

folder found within the

My Stuff

(Phone) location. These files can be included into

multimedia messages or sent as attachment files to text

messages.

3. Select an video file entry and press the key.

4. When you are ready to purchase the video, press the

Buy

Now

button to complete the transaction.

AT&T Mall 72

Accessing the MEdia Net Home

The

MEdia Net Home

menu option allows you to quickly access
your MEdia Net homepage. This page gives you quick access to
information such as local weather, sports scores, horoscope
information and quick links to the previously mentioned shopping
sites. To access this menu option:

䊳

At the Idle screen, select

Menu ➔ AT&T Mall ➔ MEdia Net Home

and press the key to launch the built-in browser and

launch this AT&T homepage.

73

Section 10: AT&T Music

AT&T Music is a group of music services and applications which
provide you access to Streaming Music, Music Videos, Music
store, Music communities, Music applications, and a unique
MusicID application.

Accessing AT&T Music

䊳

At the Idle screen, select

Menu

➔ AT&T Music

and press the

key.

Note:

Audio files less than 300 KB are treated as ringtones, whereas audio
files which are greater than 300 KB are stored in the Music Folder.
A user can not set an MP3 file as a ringtone if it is larger than 300 KB.

Adding Music to your Handset

Music files (such as ringtones) can be added to your handset by
using one or more of the following methods:

•

Download music and ringtones over the AT&T network directly to your
device by using the Shop Music feature.

•

Add music from your existing digital media collection through Windows
Media Player®.

•

Add music from music store partners through the applicable music
client.

Note:

If the Bluetooth feature is currently active on your handset, USB
communication is not available. To transfer files to your handset, turn
off the Bluetooth functionality (

Settings

➔

Set Connectivity

➔

Bluetooth

).

Shopping for Music

AT&T Music can be used to shop for ringtones, Answer Tones™
and songs from some of your favorite music stores.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ Shop

Music

and press the key.

2. Use the

Up

or

Down

Navigation key to highlight your music

store of choice (or select Ringtones), and press the

key.

3. From the

Categories

listing, highlight the desired entry and

press the key. Press the

Back

soft key to return to the

previous page.

4. To exit the browser at any time, simply press the

key.

AT&T Music 74

Transferring Music from the Digital Music Stores

In order to download music from the computer to your handset, a
microSD™ card and USB data cable are required. These items
are sold separately; go to

att.com/mobile-music

.

1. Insert the microSD™ card into the handset. For more

information, refer to “Installing the microSD™ Card” on

page 6.

2. Using your computer, open your preferred Windows Media

Digital Rights Management (WMDRM) PC music

management client (i.e.,

www.napster.com

).

3. Download the selected song to your library.

4. Use the USB adapter cable to connect the handset to the

target PC. When an active connection is established, a USB

icon ( ) displays on the phone.

5. Once the USB connection is established, the handset

displays "

Connected

" and the computer screen then

displays your device.

Note:

If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, follow steps
6-9.

6. At the Idle screen, select

Menu

➔ Settings

➔ Set

Connectivity

and press the key.

7. Choose

Select USB Mode ➔ Media Player

and press the

Save

soft key or the key.

8. Highlight the song you wish to download to the handset.

9. Using your right mouse button, click on the highlighted

song and select

Transfer Track(s) to Portable Device

from

the drop-down menu. This step begins the download

process.

Transferring Music using a Media Application

A USB cable, microSD™ card, and a current version of a media
application (such as Windows Media Player) are required for this
procedure.

1. At the Idle screen, select

Menu

➔ Settings

➔ Set

Connectivity

and press the key.

2. Choose

Select USB Mode ➔ Media Player

and press the

Save

soft key or the key.

3. Open the media player on your computer (if you are using

Windows Media Player, use version 10.0 or higher).

75

4.

Use the USB adapter cable (sold separately) to connect the

handset to the target PC. When an active connection is

established, a USB icon ( ) displays on the screen.

5. Once the USB connection is established, the handset

displays "

Connected

" and the computer screen then

displays your device.

Note:

If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, please follow
steps 6-10 from the previous see “Transferring Music from the Digital
Music Stores” on page 74.

Important!:

While this procedure specifies Windows Media Player (version

10.0 or higher), other third-party applications can be used. Refer
to the Help files of your specific application for details.

6. From within the Windows Media Player application, click

on the

Sync

tab. Previously downloaded songs are then

listed on the left side of the application.

7. Choose the destination location for the media files. The

SGH-A827 - Phone

and

SGH-A827 Card

entries both display

in a drop-down list on the right side of the screen. This

selection determines whether the audio files are

synchronized with the Phone or with the inserted memory

card.

Important!:

If there are no items present in the playlist, click the

Edit Playlist

button and begin adding the music files from among the various
media categories. See ‘Adding songs to a Playlist” on page 79.

8. Click on the checkmark boxes (to the left of the song entry)

to select the song(s) you want to synchronize to your

handset.

9. Click the

Start Sync

button at the upper right corner of the

application to download the selected songs to your

handset. A “

synchronization in progress

” message displays

on the screen. Do not unplug the handset during this

process. Once complete, a Music folder displays below the

device entry on the right of the

Sync

tab.

Note:

The maximum number of songs you can synchronize between your
phone and your PC is 700.

10. It is now safe to unplug the USB connector from the

handset.

AT&T Music 76

Using the Music Player

The Music Player is an application that can play music files. The
music player supports files with extensions AAC, AAC+, eAAC+,
MP3, WMA, 3GP, MPEG, MP4, and M4A. Launching the Music
Player allows you to navigate within your Music folders and
select playback material.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Player

and press the key.

2. Use the

Up

or

Down

Navigation key to highlight a folder

from the list:

• Now playing

: displays the songs that were recently played.

• All Music

: provides a list of all uploaded music files which have
been purchased or downloaded from your computer. This can
include ringtones, answer tones, and music.

•Artists

: provides a list of the artists that you have music stored.

•Albums

: provides a list of albums that you have stored.

• Playlists

: provides a list of your music playlists. See ‘Using

Playlists” on page 78.

•Genres

: provides a list of your music by music genre (e.g. rock,
jazz, or classical) if that information was available when the music
was loaded to the handset.

• Shop Music

: allows you to shop online music and download to the

handset.

3. When the phone displays

Now Playing

or

All Music

press

the

Select

soft key and then press key to play the

selected song.

4. Press the key to begin playing the song.

Playing Music Transferred to the Handset

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Player

and press the key.

2. Highlight

All Music

and press the key to open the

folder.

3. Use the

Up

or

Down

Navigation key to select the song you

want to listen to and press the key, or just press the

key to begin playing all the music stored on the

handset and/or the microSD™ card.

Playing Music through a Stereo Bluetooth Device

Your device supports the Stereo Bluetooth profile (A2DP) that
when synchronized to a stereo Bluetooth headset plays music in
stereo.

1. Pair your handset to a stereo Bluetooth device. For specific

pairing procedures, For more information, refer to “Set

Connectivity” on page 124.

77

2.

At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Player

and press the key.

The following options display:

•

Now playing

•

All Music

•

Artists

•

Albums

•

Playlists

•

Genres

•

Shop Music

3. Make your selection and press the key to open the

folder.

4. Use the

Up

or

Down

Navigation key to select a song and

press the key to play the song within the Music Player.

5. During playback, press the

Options

soft key. Highlight

Transfer to Bluetooth stereo headset

and press the key.

The headset searches for compatible stereo bluetooth

devices.

6. From the list of compatible devices, select the previously

paired bluetooth headset and press the key to begin

listening to your song through the headset.

Playing Music while Multitasking

The Multitasking option allows you to play the Music Player in the
background while performing other tasks on your phone. The
music pauses when an incoming call is accepted, and the music
resumes when the call ends. Music continues to play when you
receive a Text Message, Multimedia Message, or an Instant
Message.

The other options of multitasking are:

•

Call

: make or receive a call (music player is paused)

•

Messaging

: send or receive a text or multimedia message. Music
continues to play unless an audio clip is received as a part of a
multimedia message.

•

MEdia Net

: browse the web (music continues to play).

•

Music Player

: turns on Music Player, or allows you to use full-screen

controls of the music player.

•

Games and Apps

: lets you play games or access applications while

listening to music.

Important!:

Playing music and pausing the music player requires the same
amount of battery power.

AT&T Music 78

1.

At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Player

and press the key. The following options

display:

•

Now playing

•

All Music

•

Artists

•

Albums

•

Playlists

•

Genres

•

Shop Music

2. Make your selection and press the key to open the

folder.

3. Use the

Up

and

Down

Navigation keys to find the music you

want to play.

4. Once the music starts to play, the music icon displays on

the top of the screen ( ). Press the

Options

soft key

and highlight the

Hide Player

option, and press the

key.

5. Press the key to return to the Idle screen. The

Music Player

displays as center key options.

To go to the previous song press the

Rewind (Left

Navigation key). To temporarily stop the music press

Pause

( ). To advance to the next song, press

Fast Forward

(

Right

Navigation key).

After the Music Player is enabled, you can listen to music in the
background while performing other phone functions.

Important!:

When you are finished using the Music Player function, you must
press the key to stop the function to prevent the battery
from losing its charge. While paused, the player continues to use
the battery.

Using Playlists

Playlists are used to assign songs to a list of preferred media
which can then be grouped into a list for later playback. These
Playlists can be created via either the handset’s Music Player
options menu or from within a 3rd-party music application (such
as Windows Media Player) and then downloaded to the handset.

Note:

The Music Player does not necessarily support all features of a
particular file format nor all the variations of those formats. The Music
Player includes support for Windows Media Digital rights Management
(WMDRM) which allows you to play some purchased or subscription
content. Copyright protections may prevent some images, music
(including ringtones) and other content from being copied, modified,
transferred or forwarded.

79

Creating a Playlist

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Player

and press the key.

2. Highlight

Playlists ➔ New Playlist

and press the key.

The list of available music folders display. Select by album

name, artist, genre, or all music. The list of music available

for that option displays.

3. Go through the list of music, using the key to select

one or multiple songs to add to the playlist.

4. Press the

Done

soft key when you have finished selecting

the songs for the playlist. The Music Player will prompt you

for a name for the playlist.

5. Enter the name of the playlist, and press the

Save

soft key.

Adding songs to a Playlist

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Player

and press the key.

2. Highlight

Playlists

and press the key.

3. Highlight a previously created playlist and press the

key.

4. Press the

Options

➔ Add Tracks

and press the key.

The list of available music folders display. Select by album

name, artist, genre, or all music. The list of music available

for that option displays.

5. Go through the list of music, using the key to select

one or multiple songs to add to the playlist.

You can choose to add All available songs. All selects all of

the available listed songs and marks them for addition to

the playlist.

6. Press the

Done

soft key and confirm the name of the

playlist to which you want to add the song(s).

7. Press the

Save

soft key and wait for the song to be added

to the current playlist.

Remove songs from a Playlist

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Player

and press the key.

2. Select

Playlists

press

Select

soft key or the key.

AT&T Music 80

3.

Highlight an existing playlist and press the

Options ➔

Remove Tracks

and press the key.

The number of songs currently in that playlist display

below the playlist name.

4. Use the

Up

or

Down

Navigation key to highlight an audio

file (or multiple files) and press the key to select.

5. Press the

Done

soft key.

6. Confirm the playlist name that you are editing, and press

the

Save

soft key.

Importing a Playlist from a 3rd Party Application

Note:

While this procedure specifies Windows Media Player, other third-party
music applications can be used to download songs and playlists to
your handset. Refer to the Help files of your specific music application
for details.

1. At the Idle screen, select

Menu

➔ Settings

➔ Set

Connectivity

and press the key.

2. Choose

Select USB Mode ➔ Media Player

and press the

Save

soft key or the key.

3. Open Windows Media Player on your computer (version

10.0 or higher).

4. Use the USB adapter cable to connect the handset to the

target PC. When an active connection is established, a USB

icon ( ) displays on the screen.

5. Once the USB connection is established, the handset

displays "

Connected

" and the computer screen then

displays the A827 device.

Note:

If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, see
“Transferring Music from the Digital Music Stores” on page 74., see
steps 6-9.

6. From within the Windows Media Player application, click

on the

Library

tab.

7. From the left side of the

Library

tab, click on

All Music

. The

right side of the page is then populated with all of the

songs which the player has previously found.

8. Right click on the song entry and select,

Add to.. ➔

Additional Playlists

.

9. From the

Add to Playlist

dialog, click the

New

button and

type in a unique playlist name.

81

10.

Click OK when you are done entering the new playlist

name. The new Windows Media playlist is then displayed

within the

My Playlist

section of the Library tab (left side).

11. Drag and drop the newly created playlist from the

My

Playlist

section to the

A827-Phone

or the

A827-Card

entry

listed just above it.

The

A827-Phone

and

A827-Card

entries both display on the

left side of the screen.

Note:

If there are no items present in the playlist, click the

Edit Playlist

button
and begin adding the music files from among the various media
categories. See ‘Adding songs to a Playlist” on page 79.

12. It is now safe to unplug the USB connector from the

handset.

Using MusicID

MusicID is an application which uses the on-board microphone to
analyze a song sample and then compare it to a remote database
of songs. Once the application completes the analysis of the song
sample, it then provides you with the name of the song, artist and
album art as well as opportunities to buy related content.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ MusicID

and press the key. You are then presented with a list

of ID options:

• ID song!

: begins the analysis of the song being sampled through

the handset’s microphone.

• manage IDs

: provides a list of recently identified song and allows
you to obtain information about the song, delete the song, or send
the Music ID as a link to another phone number.

•help me out

: provides you with on screen descriptions of several
key MusicID features.

•exit

: allows you to exit the application and return to the main AT&T

Music menu.

2. To exit the application at any time, simply press the

key.

Using ID song!

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ MusicID

and press the key.

2. Highlight

ID song!

and press the key.

3. Place the handset’s microphone up to the source of the

song, which can be from either a radio, stereo, or headset.

The handset then begins to analyze the audio signal. If a

song match is found, the screen displays the Artist Name,

Track Title, and Album cover art.

AT&T Music 82

4.

To purchase the song (with ringtone and wallpaper if

available), highlight

get:

, and press the key.

5. To share the song ID with another user, highlight

Share ID

press the key. Enter the recipient’s phone number and

press the

ShareID!

soft key. Within a short time the

recipient receives a message containing a Music ID link to

the song.

6. If the song can not be found, the handset displays a “Sorry,

No Match Try Again!” message. Press the

newID!

soft key

and try analyzing the song again.

7. To exit the application at any time, simply press the

key.

Using Manage IDs

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ MusicID

and press the key.

2. Highlight

Manage IDs

and press the key. The screen

displays a list of the most recent successful song IDs

which were made.

3. Highlight a song and press the

Options

soft key.

4. Highlight one of the following options and press the

key.

•ID Info

: displays the Artist Name, Track Title, and Album cover art of

the identified song.

• Delete ID

: deletes the selected song from the list of identified

songs.

•New ID!

: begins the song analysis process again. Hold the

microphone to the song source and wait for analysis.

5. To exit the application at any time, simply press the

key.

Getting Help with Music ID

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ MusicID

and press the key.

2. Highlight

help me out

and press the key to select a

topic. The screen displays a list of helpful topics related to

the MusicID application. These topics cover:

• IDing a Song

: provides information about the analysis process.

• Recommendations and More!

: describes the process following
the successful identification of a song. You can choose to purchase
the song and wallpaper (if available) or send the MusicID as a link to
another phone number.

83

• Subscription

: provides details about the general usability and

monthly term information.

• About MusicID

: provides information about the Music ID software

version.

Exiting from the Music ID Application

There are two ways to exit from the MusicID application:

1. Highlight

exit

and press the key to select the option

2. Exit the application at any time by simply pressing the

key.

XM Radio

This service allows you to stream over 20 music stations of
commercial free music through your handset.

Important!:

Since this product uses a large amount of data in its stream
process, you should note that you are responsible for all data
charges incurred. It is recommended that you subscribe to a
MEdia Max data bundle so that you are not charged for data
overages.

Note:

XM Radio Mobile does not work with Bluetooth. Periodically, the
application prompts you to confirm you are still listening to the stream.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ XM Radio

and press the key.

2. Use the

Down

Navigation key to scroll through the

following list of available Menu options:

•Back

: if you are already streaming a music station, this option

allows you to return to the main guide.

• Guide

: launches the main XM Radio Mobile page which lists the
currently available radio stations. Once the subscription is
purchased, this list increases from those available only during the
trial period, to more than 20 channels.

•Help

: provides some on screen information about some of the main

XM Radio Mobile features and functions.

• About

: provides information about the XM Radio Mobile software

version.

•Exit

: allows you to exit from the Streaming Music application and

return to the main AT&T Music menu.

Streaming a Music Channel

1. Press the

OK

soft key to accept the terms of the trial

period. You have only a few days to use the service before

the trial period expires. If at any time you wish to purchase

a subscription to the XM Radio Mobile service, press the

Buy

soft key and follow the on screen prompts.

2. Use the

Up

or

Down

Navigation key to highlight a radio

station category from the guide list and press the key.

AT&T Music 84

3.

Use the Up or

Down

Navigation key to highlight a specific

radio channel and press the key to begin the stream

to your phone.

Music Video

The Music Video homepage is a component of the Cellular Video
service. This page provides you with links to some of the most
popular multimedia content.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Video

and press the key.

You are then taken to your CV Music homepage. This

homepage provides you with several sections of

accessible content.

2. Highlight the desired media clip or select from one of the

available categories and press the key.

Music Video Options

The options for the Music Video page are identical to those
options provided for within the Cellular Video homepage. For
more information, refer to “Cellular Video Options” on page 37.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ Music

Video

and press the key.

2. From the main Music Video homepage, press the

Options

soft key.

Viewing a Video Clip

1. Use the

Up

or

Down

Navigation key to highlight the video

clip and press the key.

2. After the stream buffers into memory, you can choose to

either Pause or play the content. Pressing the key

toggles the

Play

and

Pause

functionality.

The Buzz

This service allows you to navigate through Top 20 chart songs
(in a variety of categories). Other features of this service include
entertainment news about your favorite music artists, access to
an artists main page (containing discographies, ringtones,
concert dates, etc.), concert information, games, and setup
options for your own personal billboard notifications.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ The Buzz

and press the key.

85

2.

Press the

Tr ia l

soft key to accept the terms of the trial

period. You have only a few days to use the service before

the trial period expires. If at any time you wish to purchase

a subscription to this service, press the Buy soft key and

follow the on screen prompts.

3. Enter an area code, phone number (without dashes), and

Zip code into the appropriate fields on the Customize

screen. Use the Up or

Down

Navigation key to switch

between fields.

4. Press the

Confirm

soft key to accept and save your

information.

5. Once the phone number is successfully registered, press

the OK soft key to continue onto the main Billboard mobile

menu where you are given a list of categories from which

to select.

6. To exit the application at any time, simply press the

key.

Community

This Community is a place where you can find a listing of various
fan sites that provide sound clips, wallpapers, bios,
discographies, and other information about an artist.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ AT&T

Music ➔ Community

and press the key.

2. Use the

Up

or

Down

Navigation key to select a fan site and

press the key. These pages can contain a variety of

sites for music or artist information.

3. To exit the application at any time, simply press the

key.

Music Apps

The Music Apps option accesses the internet to provide Music
tools for your handset. Services provided on this site are,
Music ID and XM Radio Mobile.

1. At the Idle screen, select

Menu ➔ AT&T Music ➔ AT&T

Music ➔ Music Apps

and press the key.

2. Use the

Up

or

Down

Navigation key to select a fan site and

press the key to make your selection.

Using the Applications 86

Section 11: Using the Applications

The on-board applications include such functions as camera,
camcorder, calendar, alarms, and other tools.

These functions can be supplemented with additional
applications which can be purchased via the AT&T Mall.

䊳

At the Idle screen, select

Menu

➔ AT&T Mall ➔ Shop

Applications

and press the key.

-or-

䊳

At the Idle screen, select

Menu

➔ My Stuff ➔ Games and Apps

and press the key.

Shop Applications

1. At the Idle screen, select

Menu

➔ My Stuff ➔ Games and

Apps

and press the key.

2. Using the navigation keys, select

Shop Applications

. For

more information, see “Shop Applications” on page 71.

Using the Camera

Taking Photos

Note:

When taking a photo in direct sunlight or in bright conditions, shadows
may appear on the photo.

Note:

Your camera produces photos in JPEG format.

Note:

The maximum size of a photo taken with the camera on any setting is
within the limits that can be sent in a Multimedia Message.

1. At the Idle screen, select

Menu

➔ My Stuff ➔ Applications

and press the key. Or you can press and hold the

Camera

key on the right of the handset.

2. Using the navigation keys, select

Camera

and press the

key.

3. Before taking the photo, press the

Menu

soft key to access

camera options accessed from icons above the viewfinder

display.

4. Adjust the image by aiming the camera at the subject.

5. Press the key to take the photo.

6. Once the photo is taken, press the key to attach the

photo to a message, or to send to a Bluetooth device or

HP’s Snapfish service.

87

Note:

The number that displays in the lower-left of the screen indicates the
maximum number of pictures that can be saved to the selected media
at the current resolution.

7. Press the

Back

soft key, then the key to return to

the picture viewer.

You can use the keypad to quickly change the camera options
using the camera shortcut keys.

Camera Settings Options

If you press the

Menu

soft key before shooting a photo, the
following options are displayed below the icons listed across the
top of the viewfinder window.

•

Camera Mode

: allows you to take a photo in various modes. Once you
change the mode, the corresponding indicator displays at the top left
of the screen. The modes are:

–

Camera

–

Camcorder

–

Video Share

•

Shooting Mode

: allows you to select an image type from the following:

–

Single shot

: allows you to take a single photo and view it before

returning to the shooting mode.

–

Multi-shot

: allows you to take a succession of consecutive photos.

–

Mosaic shot

: allows you to take multiple photos and then have them

grouped together into a single final photo. Press the

List

soft key to set

the configuration they will be grouped into, which will determine the
number of photos (from 2 to 9) in the Mosaic photo

.

–

Frame shot

: allows you to choose a custom frame border for your.

Choose from one of the 20 available frames.

–

Panorama

: allows you to choose a panoramic shot.

•

Image Size

: allows you to select an image size from the following

options:

–

1280x960 (1.3M size)

–

640x480

–

320x240

•

Timer

: allows you to set a time delay before the camera takes the

photo.

–

Off

–

3 seconds

–

5 seconds

–

10 seconds

•

Lighting

: allows you to set a lighting condition from the following

options:

–

Auto

–

Daylight

–

Incandescent

–

Fluorescent

–

Cloudy

•

Night Shot

: allows you to turn on night shot which enhances the photo

for when lighting conditions are poor.

Using the Applications 88

•

Effects

: allows you to choose a custom color tone for your photo.

Choose from the following Effects Mode.

–

No Effects

: automatically adjust the picture for the best quality

available.

–

Black & White

: removes all color and display the picture as black and

white.

–

Sepia

: adds a sepia tint to the picture. This is the common orange tint

that was popular in early photography.

–

Negative

: changes the image to a negative image display.

•

Help

: allows you to see the shortcuts for various options, and to see a

brief description.

•

Settings

: allows you to change the default settings of the camera

options.

Camera Options

Camera options available after the photo has been taken and you
are still at the viewfinder screen are:

•

Take photo

: allows you to take another photo.

•

Send

: allows you to send the photo via a message, a Bluetooth device,

or to HP’s Snapfish™ application.

•

Set as

: allows you to set the photo as Wallpaper for your display, or as

a Caller ID.

•

Rotate

: allows you to rotate the photo to landscape.

Accessing the Graphics Folder

1. At the Idle screen, select

Menu

➔ My Stuff ➔ Graphics

and

press the key.

2. Use the

Up

or

Down

Navigation key to select a photo.

3. To open the photo, press the key.

Photo Options after Photo is Taken

If you navigate to the Graphics folder, the options before you
select a specific photo are:

•

Take Ph o t o

: allows you to take a photo.

•

Create Folder

: allows you to create a new subfolder in the Graphics

folder.

Once you have selected a graphic, but not loaded it, the options
are:

•

View

: allows you to view the photo.

•

Send

: allows you to attach the graphic to a message, send it to a

Bluetooth device, or to send to the HP’s Snapfish™ photo service.

•

Set as

: allows you to set the currently selected graphic to be displayed

on the Main Display or assigned to a Caller ID.

•

Move

: allows you to move either a Selected or Multiple graphics to one

of the My Stuff (Phone) folders.

•

Copy

: allows you to make a copy of the Selected or Multiple graphics

and then send it to one of the My Stuff (Phone) folders.

89

•

Delete

: allows you to delete either Selected, Multiple, or All graphics.

•

Rename

: allows you to rename the graphic.

•

Tak e Photo

: allows you to take a photo.

•

Create Folder

: allows you to create a new subfolder in the Graphics

folder.

•

Sort by

: allows you to sort the list of graphics by either: Date, Type,

Name, or Size.

•

Bluetooth Visibility

: allows you to select either Selected or Multiple

graphics visibility to Bluetooth devices.

•

Print via

: allows you to make a selected graphic printable by either

USB or Bluetooth printer.

•

Lock/Unlock

: allows you to lock/unlock the photo.

•

Properties

: allows you to view the properties of a photo.

Once you have selected and loaded the graphic, the options
change to:

•

Zoom

: allows you to zoom in or out on the existing photo.

•

Send

: allows you to attach the graphic to a message, send it to a

Bluetooth device, or to send to HP’s Snapfish™ photo service.

•

Set as

: allows you to set the currently selected graphic to be displayed

on the Main Display or assigned to a Caller ID.

•

Delete

: allows you to delete either Selected, Multiple, or All graphics.

•

Rename

: allows you to rename the graphic.

•

Edit

: allows you to edit the loaded photo, using the following options:

–

Save as

: allows you to name the photo.

–

Effects

: allows you to use effects for the entire photo: including Black
and White, Sepia, Negative, Milky, Lighting, Crayon Pastel, Oil Paint,
Blur, Despeckle, and Sharpen.

–

Partial effects

: allows you to used effects that affect only specific

areas of a photo, such as Partial Blur and Redeye Repair.

–

Adjust

: allows you to adjust the Brightness, Contrast, and Color of the

photo.

–

Tra ns fo rm

: allows you to Resize, Rotate, or Flip the photo image.

–

Crop

: allows you to crop or remove unwanted areas framing your

photo.

–

Insert

: allows you to insert Frames, Cliparts, Emoticon, and Text.

–

Send

: allows you to attach the graphic to a message, send it to a

Bluetooth device, or to send to the HP’s Snapfish

™

photo service.

–

Set as

: allows you to set the currently selected graphic to be displayed

on the Main Display or assigned to a Caller ID.

–

Print via

: allows you to make a selected graphic printable by either

USB or Bluetooth printer.

•

Bluetooth Visibility

: allows you to select either Selected or Multiple

graphics visibility to Bluetooth devices.

•

Slide Show

: allows you to create a slide show of all photos in the

folder.

•

Print via

: allows you to make a selected graphic printable by either

USB or Bluetooth printer.

•

Lock

: allows you to lock the photo.

•

Properties

: allows you to view the properties of a photo.

Using the Applications 90

Camera Shortcuts

Shortcut keys allow you to change options using your keypad,
Navigation keys, and Volume key in capture mode. The following
options are available.

Using the Camcorder

Shooting Video

When shooting video in direct sunlight or in bright conditions, it is
recommended that you provide your subject with sufficient light
by having the light source behind you.

1. In Idle mode, select

Menu ➔ My Stuff➔ Applications ➔

Camera

and press the key.

2. Press the key to switch to the camcorder.

3. Before shooting the video, you can adjust the camcorder

settings using the follow options accessed by pressing the

Menu

soft key.

4. Adjust the image by aiming the camera at the subject.

5. Press the key to begin shooting video.

6. Press the

Stop

soft key to stop the recording and save the

video file to your My Stuff folder.

Camcorder Settings Options

•

Video Clip

: allows you to set the type of video clip recorded.

–

Normal

–

Multimedia Message

•

Size

: allows you to set the video size. If you have selected Normal, you

can choose between 320x240 or 176x144 resolution. If you have

takes photo.

adjust the image brightness (Left/Right).

zooms in or out (Up/Down). Not allowed if the picture size
is set to its maximum value.

switches the handset between camera and camcorder
mode

changes the shooting mode.

sets the timing delay (Off, 3, 5, or 10 seconds).

sets the camera to Night Shot which increases the
contrast and brightness in low light.

changes the viewfinder mode from Icons, No Icons, or
Guidelines.

91

selected Multimedia Message, you may only shoot in 176x144
resolution, which is sendable via a multimedia message. If you select
320x240, the resulting video clip may be too large to send via a
multimedia message.

•

Timer

: allows you to set a time delay before the camcorder begins to

shoot video.

–

Off

–

3 seconds

–

5 seconds

–

10 seconds

•

White Balance

: allows you to set the white balance for the camcorder.

Choose Auto, Daylight, Incandescent, Fluorescent, or Cloudy.

•

Effects

: allows you to choose a custom color tone for your video.

Choose from the following Effects Mode.

–

No Effects

: automatically adjust the picture for the best quality

available.

–

Black & White

: removes all color and display the picture as black and

white.

–

Sepia:

adds a sepia tint to the picture. This is the common orange tint

that was popular in early photography.

–

Negative

: changes the image to a negative image display.

•

Audio Recording

: turn audio recording with your video On or Off.

•

Help

: allows you to see the shortcuts for various options, and to see a

brief description.

•

Settings

: allows you to change the default settings of the camera

options.

Camcorder Options

Before leaving the camcorder viewfinder after recording the
video, the following options are available by pressing the

Options

soft key:

•

Record Video

: allows you to take another video.

•

Send via

: allows you to attach the multimedia file to a message or send

it to a Bluetooth device.

Accessing the Video Folder

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Video

and

press

Option ➔ Open

or the key.

2. Use the

Up

or

Down

Navigation key to select a video file.

3. To play the video, press the key. The file is played in

the Media Player application.

4. Press the

Back

soft key to return to the list of videos.

Video Options

Once you have navigated into your Video folder, but have not
highlighted a video, the following options display:

•

Record Video

: allows you to take another video.

Using the Applications 92

•

Create Folder

: allows you to create another folder within the Video

folder.

Once you have highlighted a video, but have not loaded it, the
following options are available:

•

Play

: allows you to play the video clip.

•

Send via

: allows you to attach the multimedia file to a message or

send it to a Bluetooth device.

•

Move

: allows you to move either a Selected or Multiple videos to one

of the My Stuff (Phone) folders.

•

Copy

: allows you to make a copy of the Selected or Multiple videos

and then send it to one of the My Stuff (Phone) folders.

•

Delete

: allows you to delete Selected, Multiple, or All videos.

•

Rename

: allows you to rename a video.

•

Record Video

: allows you to go back to the Camcorder viewfinder and

record another video.

•

Create Folder

: allows you to create another folder within the Video

folder.

•

Sort by

: allows you to sort the list of files by either: Date, Type, Name,

or Size.

•

Bluetooth Visibility

: allows you to make either a Selected or Multiple

videos visible to Bluetooth devices.

•

Lock

: allows you to lock the video file to prevent deletion.

•

Properties

: allows you to view the properties of a video file.

Once you have loaded the selected video clip, the following
options are available:

•

Pause/Resume

: allows you to pause/resume playing the video clip.

•

Stop

: allows you to stop playing the video clip.

•

Jump to Track Time

: allows you to jump to a specific time in the

video.

•

Send via

: allows you to attach the multimedia file to a message or

send it to a Bluetooth device.

•

Full screen

: allows you to view the video using the full display screen.

•

Properties

: allows you to view the properties of a video file.

While playing the video clip, the key becomes a

Pause/Play

shortcut key, and the

Left

and

Right

Navigation keys become a

method to restart the video.

Once the video has completed playing, the following options are
available:

•

Play

: allows you to play the video.

•

Send via

: allows you to attach the multimedia file to a message or

send it to a Bluetooth device.

•

Properties

: allows you to view the properties of the video clip.

Camcorder Shortcuts

Shortcut keys allow you to change options using your keypad,
Navigation keys, and Volume key in capture mode. The following
options are available.

93

Music Player

This feature allows you to access both local and streaming
music, video, or playlists and then play then through a built in
Music Player. For more information, see “Using the Music Player”
on page 76.

Record Audio

Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time is limited to free memory
space available.

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Applications

➔

Record Audio

and press the key.

2. To start recording, press the key. Record a memo by

speaking into the microphone. Options available before an

audio recording is made are:

• Record

: allows you to start recording an audio clip. If you are
planning to send the Audio Clip via MMS, set the Record Audio
Setting > Recording Time to Limit for MMS.

• My Voice Clips

: allows you to go to the My Stuff folder for

previously recorded voice clips.

• Record Audio Settings

: allows you to set up a recording preset:
Default Name and Recording Time (1 min, 2 min, 3 min, 4 min, 5
min, or 60 min, Limit for MMS).

3. Press the

Stop

soft key to stop the recording or pause the

recording by pressing the key. If the recording time

expires, the message is automatically saved.

4. Press the

Options

soft key to display the following options:

•Play

: allows you to play the memo.

• Record

: allows you to save the current memo and begin another

session.

• My Voice Clips

: allows you to save the audio clip to your My Stuff

folder.

shoots video.

adjust the image brightness (Left/Right).

zooms in or out (Up/Down).

switches the handset between camera and camcorder
mode.

changes the recording mode from Normal to Multimedia
Message.

sets a time delay (Off, 3, 5, or 10 seconds).

changes the viewfinder mode from Icon to No Icons.

Using the Applications 94

• Record Audio Settings

: allows you to set up a recording preset:
Default Name and Recording Time (1 min, 2 min, 3 min, 4 min, 5
min, or 60 min, Limit for MMS).

• Send via

: allows you to send your memo to other people by using

MMS or to a Bluetooth device.

•Set as

: allows you to set the audio file as a voice call ringtone, a

ringtone for a specific caller, or an alarm tone.

• Delete

: allows you to delete the memo.

•Rename

: allows you to change the memo’s name.

• Bluetooth Visibility

: allows you to make the audio file visible to a

Bluetooth device.

•Lock/Unlock

: allows you to lock/unlock the Audio file.

• Properties

: displays the Name, Size, Format, Duration, Forwarding,

Created Date/Time, and storage Location of the voice memo.

5. To exit, press the

Back

soft key or the key.

Audio

This folder shows a list of audio clips. Audio clips include default
tones that come with the handset, audio clips you have
downloaded, and audio clips you have recorded. When a voice
memo is recorded and saved, it is stored in the Audio folder. To
access this folder:

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Audio

and

press the key.

2. Use the

Up

or

Down

Navigation key to select a recorded

memo.

3. A list of voice memos displays. To play a recording, press

the

Options

soft key and select

Play

, or the key.

4. To exit, press the

Back

soft key or the key.

Alarms

This feature allows you to:

•

set the alarm to ring at a specific time.

•

set the phone to switch on automatically and ring the alarm even if the
phone is switched off.

To set the alarm:

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Applications

➔

Alarms

and press the key. The following options

display:

•Wake-up Alarm

: the alarm rings to wake you up at the specified

time.

• Alarm 1

: primary alarm setting.

• Alarm 2

: secondary alarm setting.

• Alarm 3

: third alarm setting.

• Alarm 4

: fourth alarm setting.

• Auto Power-up

: the alarm rings even when the phone is turned off.

95

2.

Select an alarm type and press the key. Set the

following options:

• Alarm Activation

: Use this to activate/deactivate this feature (On/

Off). The only way to edit the remaining fields is to select On.

• Alarm Time

: use the alphanumeric keypad enter a time for the

alarm to sound.

Note:

Your phone is preset to a 12-hour format. To change the time format,
see “Set Time & Date” on page 118.

• Alarm Type

: press the key to select a new type of alert
notification (Melody, Increasing Melody, Vibration, Vibration then
Melody, Vibration & Melody, or Vibration & Increasing Melody)

•Alarm Tone

: press the key to select a tone from one of the

My

Stuff

folders.

• Alarm Volume

: press the

Left

and

Right

Navigation key to adjust

the volume level (1-7).

• Alarm Day

: press the key to access the Recurrence menu.

Use the Up or

Down

Navigation key to highlight a occurrence of the
day(s) you wish your alarm to sound. Press the key to select
the day entry. Press the OK soft key to save your settings.

•Snooze

: use this option to set the snooze feature for the alarm (Off,

1 Min., 3 Min., 5 Min., 7 Min., or 10 Min.).

• Repeat

: use set the number of times this alarm type can be
repeated (1 Time, 2 Times, 3 Times, 5 Times, or 10 Times). Snooze
must be active for this feature to be enabled.

3. Press the key to save these changes.

Note:

To turn off the alarm when it rings, press any key to activate, and press
the OK soft key.

Setting the Auto Power-up Alarm

You can set up the phone to ring an alarm, even if the phone is
switched off.

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Applications

➔

Alarm ➔ Auto Power-up

and press the key.

2. Using the

Up

or

Down

Navigation key, highlight On and

press the

Save

soft key or the key to activate the

Autopower feature.

If the menu option is set to

Off

, and the phone is switched

off at the specified time, the alarm does not ring.

3. Press the key to return to Idle mode when you are

finished.

Calendar

The calendar feature allows you to view the Month, Week, and
Day layout views. You can also create an Appointment,
Anniversary, Holiday, Important, or Private entries. It also shows
any Missed Alarm Events that have occurred.

Using the Applications 96

To access the Calender menu:

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Applications

➔

Calendar

and press the key.

2. Press the

Options

soft key and highlight

Create

.

3. Press the key. The following options are available:

• Appointment

• Anniversary

• Holiday

•Important

•Private

4. Other options for the Calendar include:

• Settings

: this option allows you to configure the Calendar’s Starting

Day and Default View Mode.

• Missed Alarm Event

: this option displays any missed events.

•Memory Status

: this option displays a list of the different Calendar

event categories along with the memory allocation for each.

Appointment

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Applications

➔

Calendar

and press the key.

2. Press the

Options

soft key. Highlight

Create

, select

Appointment

, and press the key to use the following

options:

• Title

: enter a title for this appointment (up to 15 characters).

• Details

: enter a description for this appointment (up to 100

characters).

• Start Date

: enter a date for this appointment to begin.

•Start Time

: enter a time for this appointment to begin. Use the

Right

Navigation key to select AM or PM for the start time of the

scheduled event.

• End Date

: enter a date for this appointment to end.

• End Time

: enter a time for this appointment to end. Use the

Right

Navigation key to select AM or PM for the start time of the
scheduled event.

•Location

: enter a location description for this appointment (up to 15

characters).

•Alarm

: allows you to set an alarm for this event. Press the key
to select this option. Once selected, all remaining alarm settings are
enabled.

•Before:

allows you to set the amount of time (minutes, hours, days)

before your appointment you wish the alarm to sound.

•Alarm Tone

: allows you to choose an alarm tone. Once highlighted,

press the key to select this audio file.

97

• Repeat

: allows you to set an the number of repetitions allowed for

this appointment (Daily, Weekly, or Monthly). Use the

Right

or

Left

Navigation keys to select. Once selected, all remaining alarm
settings are enabled.

•Every

: allows you to set an the number of times the entry is repeat

in the selected time frame.

• Except Weekends

: allows you to exempt non-work days

(weekends) from the appointment schedule.

•Until

: allows you to set as duration for this appointment by

assigning an expiration date).

3. Press the key to save this new appointment entry

when you are finished.

Anniversary

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Applications

➔

Calendar

and press the key.

2. Press the

Options

soft key. Highlight

Create

, select

Anniversary

, and press the key to use the following

options:

• Title

: enter a title for this occasion.

• Details

: enter details for the occasion.

•Date

: enter a date for this anniversary to begin.

•Alarm

: allows you to set an alarm for this event. Press the key
to select this option. Once selected, all remaining alarm settings are
enabled.

–

Before

: allows you to set the amount of time (day, week) before your

appointment you wish the alarm to sound.

–

Alarm Time

: allows you to enter a time for the alarm to begin notifying

you of the occasion. Use the

Right

Navigation key to select AM or PM.

–

Alarm Tone

: allows you to choose an alarm tone. Once highlighted,

press the key to select this audio file.

• Repeat Every Year

: allows you to set whether this entry is repeated
on a yearly basis. Press the key to select this option. Once
selected, all remaining alarm settings are enabled.

3. Press the key to save this new anniversary entry

when you are finished.

Note:

The remaining Calendar entry types (Holiday, Important, or Private)
contain similar fields and use the same creation procedures.

Other Event Options

1. At the Idle screen, select

Menu ➔ My Stuff ➔ Applications

➔

Calendar

and press the key.

2. Select a day containing a Calendar entry and press the

key. If the selected day has one or multiple Calendar

entries, those are then displayed in a list.