The design and shape can be changed according to the model.
Indoor Unit
Air Inlet
Room Temperature sensor
Power(On/Off) button
Air filter
(under the grille)
(Auto-Cool, Cool, Dry, Fan : Green)
Airflow blades
(outlet)
Set temperature &
room temperature
Operation indicator
Turbo function indicator
(Green)
Timer indicator
(Orange)
Fan speed indicator
(Green)
Remote control sensor
Auto cleaning indicator
(Green)
Energy saving indicator
(Green)
Anions indicator
(Green)
ee
NNNNoooottttee
◆ In the Auto mode, 2 fan indicators increase and decrease continuously
and turn round.
◆ In the modes except the Auto mode, the fan speed indicator increases
and decreases continuously and turn round each time you press the
button. If you set the Turbo function, the fan speed indicator turns
round with the maximum setting and speed.
◆ If you want to turn on/off the Display during operation,
press the button on the remote control.
◆ The room temperature sensor senses air temperature around the
sensor, and shows the temperature on the display.
E-
4
Outdoor Unit
Air Inlet(Rear)
Air Outlet
Connection Valve
E-
5
Remote Control - Buttons and Display
Remote control
transmission indicator
Battery life indicator
Fan speed indicator
Anions indicator
Sleep mode indicator
On Timer indicator
Operating mode
( AUTO, COOL,
DRY, FAN)
Sound On / Off indicator
Turbo function indicator
Temperature setting
Air flow direction
Off Timer indicator
Energy saving indicator
Power (On/Off) button
Mode selection button
(AUTO, COOL, DRY, FAN)
Fan speed adjustment button
Turbo button
Energy saving button
On Timer button
Off Timer button
Temperature adjustment
buttons
Digital On/Off button
Swing button
Sound On/Off button
Auto Cleaning button
Timer Set/ Cancel button
Sleep button
Anions button
E-
6
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when:
◆ You purchase the air conditioner
◆ The remote control does not work correctly
ee
NNNNoooottttee
1
2
◆ Use two AAA, LR03 1.5V batteries.
◆ Do not use old batteries or different kinds of batteries together.
◆ Batteries may be completely discharged after 12 months, even
◆ if they have not actually been used.
Remove the battery cover in the rear of the remote control by pushing
it with your thumb.
Insert two batteries, respecting the polarities as indicated by
the + and - symbols.
Close the cover by sliding it back in its place.
3
E-
E-
7
7
Getting Start
The User’s Manual provides you with valuable information about your air conditioner.
Please read this manual carefully before using the air conditioner.
It will help you take full advantage of the unit's features.
You have already seen the basic description of the unit on pages from 4 to 6.
Starting with the next page, you will find a series of step-by- step procedures
for each function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESSPUSHHOLD DOWN
E-
8
Selecting the Auto Mode
You can select the Auto mode if you want to cool your room automatically.
You can adjust the temperature in this mode.
1
If necessary, press the (On/Off) button.
Result:◆
Press the button on the remote control until is displayed.
2
Result
:◆ The indoor unit beeps each time you press the button.
The operation indicator on the indoor unit lights up.
◆
The air conditioner starts up in the mode you selected last.
◆ The indoor unit beeps.
◆ The air conditioner runs in the Auto mode.
◆ The Auto mode cools the room depending on the set temperature.
ee
NNNNoooottttee
3
Press thebutton to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result:◆
You can change modes at any time.
Each time you press thebutton:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The fan speed is adjusted automatically.
◆ 2 fan speed indicators increase and decrease continuously and
turn round.
Control Panel
E-
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.