Samsung Artik 530 User Manual

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an "AS IS"
basis, without warranties of any kind. This document and all information discussed herein remain the sole and exclusive property of
Samsung Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one
party to the other party under this document, by implication, estoppel or other-wise. Samsung products are not intended for use in life
support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or
physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply.
For updates or additional information about Samsung products, contact your nearest Samsung office. All brand names, trademarks and
registered trademarks belong to their respective owners.

2

Table of Contents ................................................................................................................................................................... 3

List of Figures .......................................................................................................................................................................... 4

List of Tables ........................................................................................................................................................................... 4

Version History ...................................................................................................................................................................................... 5

Handling Guide ....................................................................................................................................................................... 6

ARTIK 530 Development Board Overview ........................................................................................................................... 7

features .................................................................................................................................................................................................. 7

Block diagram ....................................................................................................................................................................................... 8

Mechanical Drawings ........................................................................................................................................................................... 9

ARTIK 530 Module ................................................................................................................................................................ 11

ARTIK 530 Module Specification ........................................................................................................................................................ 11

ARTIK 530 Development Board Interposer Board ........................................................................................................... 12

Interposer Board Boot mode Configuration .................................................................................................................................... 13

USB OTG ............................................................................................................................................................................................... 14

HDMI 1.4a ............................................................................................................................................................................................ 14

LVDS ..................................................................................................................................................................................................... 15

Ethernet................................................................................................................................................................................................ 15

Antenna ................................................................................................................................................................................................ 16

ARTIK 530 Development Board Platform Board .............................................................................................................. 17

Configuration of External Power Source .......................................................................................................................................... 18

SD-Card Interface................................................................................................................................................................................ 19

EarJack Interface ................................................................................................................................................................................. 19

MIPI DSI/CSI Interface ......................................................................................................................................................................... 19

USB Host 2.0 Interface ....................................................................................................................................................................... 21

Connector to IF Board Interface ........................................................................................................................................................ 22

ARTIK 530 Development Environment IF Board .............................................................................................................. 23

Preview on the ARTIK IF board .......................................................................................................................................................... 23

Configuration of external Power Source .......................................................................................................................................... 24

ARTIK 530 Development Board Booting ........................................................................................................................... 25

Serial Port Connection ....................................................................................................................................................................... 25

Terminal Emulator Installation ......................................................................................................................................................... 26

Power on the ARTIK 530 Development Board.................................................................................................................................. 27

Legal Information ................................................................................................................................................................. 29

3

Figure 1. Preview of the ARTIK 530 Development Board .................................................................................................... 7

Figure 2. ARTIK 530 Development Board .............................................................................................................................. 8

Figure 3. Mechanical Drawing ARTIK 530 Development Board and Interposer Board all dimensions are in [mm] .. 9

Figure 4. Mechanical Drawing ARTIK 530 Development Board Platform Board all dimensions are in [mm] .......... 10

Figure 5. ARTIK 530 Development Board Interposer Board Left Top Side, Right Bottom Side .................................. 12

Figure 6. ARTIK 530 Development Board Booting Switch Location ................................................................................ 13

Figure 7. USB OTG Interface location on the Interposer Board ...................................................................................... 14

Figure 8. HDMI 1.4a Interface location on the Interposer Board ................................................................................... 14

Figure 9. LVDS Interface location on the Interposer Board ............................................................................................. 15

Figure 10. Ethernet Interface location on the Interposer Board .................................................................................... 15

Figure 11. Antenna location on the Interposer Board ..................................................................................................... 16

Figure 12. ARTIK 530 Development Board Platform Board Left Bottom Side, Right Top Side ................................... 17

Figure 13. Jumper Interface locations JP1-JP4 on Connectors J702, J703 of the Platform Board ............................... 18

Figure 14. SD-Card Interface location on the Platform Board ........................................................................................ 19

Figure 15. Ear Jack Interface location on the Platform Board ......................................................................................... 19

Figure 16. MIPI DSI Interface location on the Platform Board ........................................................................................ 20

Figure 17. MIPI CSI Interface Location on the Platform Board ....................................................................................... 20

Figure 18 USB2.0 Interface location on the Platform Board ........................................................................................... 21

Figure 19. Expansion Connector Interface location on the Platform Board ................................................................. 22

Figure 20. ARTIK 530 Development Board IF Board ......................................................................................................... 23

Figure 21. Jumper Interface locations J20, J21 on the IF Board ....................................................................................... 24

Figure 22. Typical Linux® Serial Console ........................................................................................................................... 25

Figure 23. USB Serial Cable hooked up to the Platform Board ....................................................................................... 26

Figure 24 Connection Power adaptor with development Board .................................................................................... 27

Figure 25. Power switch location on the development Board ........................................................................................ 28

Figure 26. Power button location on the development Board ....................................................................................... 28

Table 1. Main Features of the ARTIK 530 Module ............................................................................................................. 11

Table 2. Boot option that can be set on the Interposer Board ....................................................................................... 13

Table 3 Antenna spec ........................................................................................................................................................... 16

Table 4. Connector J2 ............................................................................................................................................................ 23

Table 5. Connector J3 ............................................................................................................................................................ 24

4

Revision

Date

Description

Maturity

V1.0

January 30, 2017

ARTIK 530 Development Board User Guide.

Release

V1.01

February 7, 2017

Look and feel updates.

Release Update

5

Precaution against Electrostatic Discharge

When using the Samsung ARTIK™ 530 Development Board, ensure that the environment is protected against static electricity:

Contamination

Do not use the ARTIK 530 Development Board in an environment exposed to dust or dirt adhesion.

Temperature/Humidity

The ARTIK 530 Development Board is sensitive to:

1. Environment

2. Temperature

3. Humidity

High temperature or humidity deteriorates the characteristics of ARTIK 530 Development Board, therefore, do not store or
use the ARTIK 530 Development Board under such conditions.

Mechanical Shock

Do not to apply excessive mechanical shock or force to the ARTIK 530 Development Board.

Chemical

Do not expose the ARTIK 530 Development Board to chemicals. Exposure to chemicals leads to reactions that deteriorate the
characteristics of the ARTIK 530 Development Board.

EMS (Electro Magnetic Susceptibility)

Strong electromagnetic waves or magnetic fields may affect the characteristics of the ARTIK 530 Development Board during
the operation under insufficient PCB circuit design for Electro Magnetic Susceptibility (EMS).

6

The ARTIK 530 Development Board consists of one Interposer Board, one Platform Board and one IF Board. The Interposer
Board does include the ARTIK 530 Module. The ARTIK 530 Development Board is an affordable approach for developing an
IoT solution. Figure 1 shows the form factors of the various boards that make up the ARTIK 530 Development Board.

7

Figure 2 shows the block diagram of the ARTIK 530 Development Board, if you want more information on the ARTIK 530
Module please consult the ARTIK 530 Module Datasheet.

8

Figure 3 and Figure 4 show the ARTIK 530 Development Board Interposer Board and the Platform Board respectively.

9

10

® ®

®

®

The ARTIK 530 Development Board contains the ARTIK 530 Module. This section will describe some of the main features of
this module. For more information on the ARTIK 530 Module please consult the ARTIK 530 Module datasheet.

The ARTIK 530 Module is designed for IoT devices and it contains a lot of functions based on a Linux® system. Not only

multimedia functions but also network functions for example 802.11 or ZigBee®. In addition the ARTIK 530 Module has mass

storage functionality and its own security solution. Table 1 shows the main features of the ARTIK 530 Module that is part of
the ARTIK 530 Development Board.

11

The Interposer Board as depicted in Figure 5 highlights the most important components on the Interposer board.

12

SW402

eMMc 1st Boot

SD Card 1st Boot

USB 1st Boot

1

Off

Off

On 2 Off

Off

On 3 X X X 4 Off

On

X

This section describes the various boot modes that are supported on the ARTIK 530 Development Board. Table 2 and Figure 6
show how to manipulate SW402 and where SW402 is located on the Interposer Board to set the various booting options that
are available on the ARTIK 530 Development Board.

When ‘eMMc 1st Boot’ is selected as a booting option, the system will first try to boot from eMMc, if this fails the system will

search for an SD Card to boot from. If booting from the SD-Card also fails the system tries to boot from USB. When choosing
the SD-Card booting option, the system starts with booting from SD, and if this fails will continue to try a USB boot. When USB
is selected as the booting mechanism of choice, only a USB boot will be attempted.

13

The Interposer board has one USB OTG connector located as can be seen in Figure 7.

The Interposer board has one HDMI 1.4a connector (Micro D-Type) located as can be seen in Figure 8. The following video
formats are supported:

1. 480p/480i @59.94Hz/60Hz, 576p/576i@50Hz

2. 720p/720i @50Hz/59.94Hz/60Hz

3. 1080p/1080i @50Hz/59.94Hz/60Hz

14

The Interposer board has one LVDS Interface containing 5x data channels and one clock channel, its location can be seen in
Figure 9. The available maximum resolution is 1920x1080@60fps.

The Interposer board has one Ethernet Interface, its location can be seen in Figure 10. The Ethernet Interface is based on

802.3az-2010 complying to the Energy Efficient Ethernet (EEE) standard. The maximum theoretical speed of the interface is
1000Mbps.

15

Property

Description

Antenna Type

Dipole Antenna

Antenna Peak Gain

+1.43(2.4GHz)/ +0.91(5GHz)

Frequency

2.4GHz, 5GHz (for 802.11, Bluetooth®, ZigBee®)

Connector Type

SMA-M

Antenna Size

108.7mm

If 802.11 or Bluetooth® functionality is required, the antenna which is enclosed as part of the ARTIK 530 Development Kit has
to be attached to the Interposer board as depicted in Figure 11. More details on the antenna spec is given in Table 3.

16

The Platform Board as depicted in Figure 12 highlights the most important components on the Interposer board.

17

Warning : whenever JP1-JP4 are all in 1-2 mode, connect either a Battery or a DC-5V Adapter, but
NEVER connect both at the same time!

Through selection of the Jumpers JP1-JP4, located on J702, J703, the power source can be selected. When power is provided
from a DC-5V Adapter or a Battery, all jumpers are in the 1-2 position. When power is provided from the DC-5V Adapter and
at the same time a battery is connected that is being charged (Battery Charging Mode), all jumpers are in the 2-3 position.

When the jumpers [JP1-JP4] are in the 1-2 position, (DC-5V Adapter mode or Battery mode) either connect a battery or the DC­5V adapter but never both at the same time. When the jumpers [JP1-JP4] are in the 2-3 position, (Battery Charging Mode)
connect both a battery and the DC-5V Adapter.

Figure 13 shows the default settings and how to switch between the settings. When the ARTIK 530 Development Board is used
with an external power adapter make certain that you use a 5V-5A adapter with a 2.1x5.5mm plug.

18

The Platform board has one SD-CARD interface supporting SD3.0 located as can be seen in Figure 14.

The Platform board has one 4 pin ear jack interface supporting stereo audio as can be seen in Figure 15.

The Platform board has one MIPI DSI and one MIPI CSI interface. The location of the DSI Display interface can be seen in
Figure 16. The location of the MIPI CSI interface can be seen in Figure 17.The MIPI DSI interface can operate at a maximum

19

resolution of WUXGA (1920x1200), whereas the MIPI CSI interface can have a static resolution of 5M pixels or a dynamic
resolution for video capturing of 1080P.

20

The Platform board has one USB 2.0 Interface. The location of the USB 2.0 interface can be seen in .

21

The Platform board has one expansion connector that can be seen in Figure 19. This connector enables for expansion
possibilities.

22

Pin Name

Pin Number

Pin Number

Pin Name

XADC1

1 2 GND

XADC2

3 4 ADD_XGPIO0

XADC3

5 6 ADD_XGPIO1

XADC4

7 8 ADD_XGPIO2

XADC5

9

10

ADD_XGPIO3

GND

11

12

ADD_XGPIO4

ADD_XI2C0_SCL

13

14

ADD_XGPIO5

ADD_XI2C0_SDA

15

16

ADD_XGPIO6

GND

17

18

ADD_XGPIO7

ADD_XSPI0_CS

19

20

ADD_XGPIO8

ADD_XSPI0_CLK

21

22

ADD_XGPIO9

ADD_XSPI0_MISO

23

24

GND

ADD_XSPI0_MOSI

25

26

ADD_XAGPIO0

GND

27

28

GND

NC

29

30

ADD_XPWM0_OUT

MICOM_GPIO1

31

32

GND

GND

33

34

ADD_XUART0_RX

NC

35

36

ADD_XUART0_TX

NC

37

38

GND

GND

39

40

XADC0

Figure 20 shows the highlights of the connector IF board. In addition Table 4 with J2 and Table 5 with J3 show the pinout of the
connectors with its meaning.

23

Pin Name

Pin Number

Pin Number

Pin Name

GND

1

2

MICOM_GPIO1

GND

3

4

MICOM_GPIO2

GND

5

6

MICOM_GPIO3

GND

7

8

MICOM_GPIO4

DC5V

9

10

MICOM_GPIO5

11

12

MICOM_GPIO6

VBAT_MAIN

13

14

MICOM_GPIO7

15

16

MICOM_GPIO8

AP_VDDIO

17

18

MICOM_GPIO9

19

20

MICOM_GPIO10

VDD_EXT1P8_ALIVE

21

22

MICOM_GPIO11

23

24

MICOM_GPIO12

VDD_EXT1P8

25

26

MICOM_GPIO13

27

28

MICOM_GPIO14

VDD_EXT3P3_ALIVE

29

30

GND

31

32

GND

VDD_EXT3P3

33

34

GND

35

36

GND

VDD_EXT5P0_1

37

38

GND

39

40

GND

Description

Power Source

Default Value

Connect

I2C, UART, GPIO

DCDC_5V_1



Place Jumper J20:[1-2]

VDDEXT_33_OFF



Place Jumper J20:[3-4]

VDDEXT_18_OFF



Place Jumper J20:[5-6]

XAGPIO

DC5V



Place Jumper J21:[1-2]

VDD_EXT3P3_ALIVE



Place Jumper J21:[3-4]

VDD_EXT1P8_ALIVE



Place Jumper J21:[5-6]

Through selection of the Jumpers J20 and J21 you can choose the IO power source (I2C, UART GPIO) or the XGPIO power
source of either, 1.8V, 3.3V or 5V. Figure 21 shows how to set the various jumpers to switch between power sources.

24

This section will describe how to start working with your ARTIK 530 Development Environment by setting up a serial
connection on your development PC and booting up the ARTIK 530 Development Environment.

As a first step we will select a serial console to communicate with the ARTIK 530 Module that is located on the ARTIK 530
Development Environment. You can use a typical Linux® serial console as depicted in Figure 22, using the serial connector. If
your PC does not have a serial port, use the micro-USB B serial cable instead. To use the serial USB cable you need to install
the associated device driver. Figure 23 depicts the USB serial cable and where it is hooked up to the Platform Board.

25

Setting up a connection with the ARTIK 530 Module can be done in a wired or wireless manner. Here we choose to install
PuTTY a free serial console. The software can be downloaded from http://www.putty.org/. Once downloaded go through the
following steps:

1. Open the device manager on the control panel.

2. When using a PC install the USB to Serial driver. The driver can be found at the following location:

(http://www.ftdichip.com/Drivers/CDM/CDM21218_Setup.zip). For other drivers please visit
(http://www.ftdichip.com/Drivers/D2XX.htm).

3. Check the COM port number on your PC when you connect the USB serial cable. In our case the COM port allocated

is COM9.

4. Set the PuTTY configuration as follows:
a. Set the “Serial line” as the COM port number found in step 3.
b. Set the COM speed to "115200".
c. Set the connection type to "Serial".
d. Save the session under ARTIK-Pro.

5. Select your saved session and click the “Open” button.

26

To power up the ARTIK 530 Development Environment you first have to connect the power adapter and the Platform Board
as shown in Figure 24. In addition make certain that the jumpers JP1-JP4 located on the Platform Board are set in state 1-2 see
Configuration of External Power Source section for details.

27

Turn on the power switch as shown in Figure 25.

Once the power switch is turned on, push the power button (SW2), as depicted in Figure 26, for about 1 second. Once
released the booting process will start and you should see booting messages from your console, using the serial connection
that you previously established.

28

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH THE SAMSUNG ARTIK™ DEVELOPMENT BOARD AND

ALL RELATED PRODUCTS, UPDATES, AND DOCUMENTATION (HEREINAFTER “SAMSUNG PRODUCTS”). NO LICENSE, EXPRESS

OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. THE
LICENSE AND OTHER TERMS AND CONDITIONS RELATED TO YOUR USE OF THE SAMSUNG PRODUCTS ARE GOVERNED
EXCLUSIVELY BY THE SAMSUNG ARTIK™ DEVELOPER LICENSE AGREEMENT THAT YOU AGREED TO WHEN YOU REGISTERED AS
A DEVELOPER TO RECEIVE THE SAMSUNG PRODUCTS. EXCEPT AS PROVIDED IN THE SAMSUNG ARTIK™ DEVELOPER LICENSE

AGREEMENT, SAMSUNG ELECTRONICS CO., LTD. AND ITS AFFILIATES (COLLECTIVELY, “SAMSUNG”) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION CONSEQUENTIAL OR INCIDENTAL DAMAGES, AND SAMSUNG DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTY, ARISING OUT OF OR RELATED TO YOUR SALE, APPLICATION AND/OR USE OF
SAMSUNG PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATED TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.

SAMSUNG RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION, DOCUMENTATION AND SPECIFICATIONS WITHOUT
NOTICE. THIS INCLUDES MAKING CHANGES TO THIS DOCUMENTATION AT ANY TIME WITHOUT PRIOR NOTICE. THIS
DOCUMENTATION IS PROVIDED FOR REFERENCE PURPOSES ONLY, AND ALL INFORMATION DISCUSSED HEREIN IS PROVIDED

ON AN “AS IS” BASIS, WITHOUT WARRANTIES OF ANY KIND. SAMSUNG ASSUMES NO RESPONSIBILITY FOR POSSIBLE ERRORS

OR OMISSIONS, OR FOR ANY CONSEQUENCES FROM THE USE OF THE DOCUMENTATION CONTAINED HEREIN.

Samsung Products are not intended for use in medical, life support, critical care, safety equipment, or similar applications
where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any
governmental procurement to which special terms or provisions may apply.

This document and all information discussed herein remain the sole and exclusive property of Samsung.
All brand names, trademarks and registered trademarks belong to their respective owners. For updates or
additional information about Samsung ARTIK™, contact the Samsung ARTIK™ team via the Samsung ARTIK™
website at www.artik.io.

Copyright © 2017 Samsung Electronics Co., Ltd.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written consent of
Samsung Electronics.

29

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Seeed Studio:
102060026