Samsung Alias User Manual

ZI12_PM_U740_11307_F9

SCH-u740 Series

PORTABLE

All Digital

Mobile Phone

User Guide

Please read this manual before operating your

phone, and keep it for future reference.

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property
of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not
limited to, accessories, parts, or software relating there to (the “Phone System”), is
proprietary to Samsung and protected under federal laws, state laws, and international
treaty provisions. Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets, copyrights, software, computer
programs, and related documentation and other works of authorship. You may not infringe
or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree
that you will not (and will not attempt to) modify, prepare derivative works of, reverse
engineer, decompile, disassemble, or otherwise attempt to create source code from the
software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), L.P.

Headquarters: Customer Care Center:

1301 E. Lookout Drive 1000 Klein St.

Richardson, TX 75082 Plano, TX 75074

Toll Free Tel: [phone].HELP (4357)

Internet Address: http://www.samsungusa.com

©

2007 Samsung Telecommunications America, L.P. is a registered trademark of

Samsung Electronics America, Inc. and its related entities.

GH68-12047A

Licensed by Qualcomm Incorporated under one or more of the following patents: U.S.

Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225;

5, 109, 390.

Printed in Korea

Openwave® is a registered Trademark of Openwave, Inc.

RSA® is a registered Trademark RSA Security, Inc.

ZI12_PM_U740_11307_F9

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY
PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS",
AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE
OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF
THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

1

Table of Contents

Section 1: Getting Started ...........................................................................5

Turning Your Phone On and Off ................................................................................. 5

Setting Up Voicemail .................................................................................................5

Understanding this User Manual ............................................................................... 6

Notes and Tips ..........................................................................................................7

Section 2: Understanding Your Phone ........................................................8

Features of Your Phone .............................................................................................8

Open View of Your Phone ..........................................................................................9

Closed View of Your Phone ..................................................................................... 11

Command Keys ...................................................................................................... 12

Understanding the Display Screen ..........................................................................14

Battery ....................................................................................................................18

Section 3: Call Functions ...........................................................................23

Making a Call ..........................................................................................................23

Answering a Call .....................................................................................................24

In-Use Menu Options ..............................................................................................25

Recent Calls .......................................................................................................... 25

Roaming .................................................................................................................29

TTY .........................................................................................................................30

VoiceSignal™ .........................................................................................................30

Section 4: Menu Navigation ......................................................................38

Menu Navigation .....................................................................................................38

Navigation Key Shortcuts ........................................................................................39

Menu Outline ..........................................................................................................39

Section 5: Entering Text ............................................................................44

Changing the Text Entry Mode ................................................................................44

Entering Text Using VoiceMode ...............................................................................45

Entering Text Using Word Mode ..............................................................................46

Entering Upper and Lower Case ..............................................................................47

Entering Symbols ....................................................................................................47

Entering Numbers ...................................................................................................48

Section 6: Understanding Your Contacts ..................................................49

Opening Contacts Menu ..........................................................................................49

Contacts Icons ........................................................................................................50

Adding a Contact ....................................................................................................50

Adding Pauses ........................................................................................................53

Contact Groups .......................................................................................................53

Finding a Contacts Entry .........................................................................................56

Editing an Existing Contact Entry .............................................................................56

Deleting a Contact Entry ......................................................................................... 57

Storing Numbers After a Call ...................................................................................57

Speed Dialing .........................................................................................................57

Table of Contents 2

My Name Card ........................................................................................................59

Finding My Phone Number ......................................................................................59

Section 7: Messaging ............................................................................... 60

Types of Messages .................................................................................................60

Retrieving New Messages .......................................................................................61

Creating and Sending Text Messages ......................................................................61

Creating and Sending Picture-Video Messages .......................................................63

Creating and Sending Messages in Landscape Mode ..............................................64

Receiving Picture-Video Messages ..........................................................................64

New Sketch Messages ............................................................................................66

Postcard Message ..................................................................................................66

Message Folders .....................................................................................................68

Changing Message Settings ....................................................................................73

Wireless Sync Email ................................................................................................74

Voicemail ................................................................................................................74

E-Mail ....................................................................................................................74

Mobile IM ...............................................................................................................75

Chat .......................................................................................................................75

Section 8: Changing Your Settings .......................................................... 76

My Account ............................................................................................................76

Tools ......................................................................................................................76

Bluetooth Menu ......................................................................................................77

Sounds Settings ......................................................................................................79

Display Settings ......................................................................................................82

Phone Settings ........................................................................................................85

Call Settings ...........................................................................................................91

Memory ..................................................................................................................94

Phone Info ..............................................................................................................95

Section 9: Multimedia .............................................................................. 96

Get It Now ..............................................................................................................96

Music & Tones .......................................................................................................97

Picture & Video .....................................................................................................104

Games .................................................................................................................111

News & Info .........................................................................................................112

Tools on the Go ....................................................................................................112

Extras ..................................................................................................................113

Section 10: Tools ..................................................................................... 114

Voice Commands ..................................................................................................114

Calculator .............................................................................................................114

Calendar ...............................................................................................................116

Alarm Clock ..........................................................................................................118

World Clock ..........................................................................................................119

Stop Watch ...........................................................................................................120

Notepad ................................................................................................................120

3

Section 11: Landscape Mode ..................................................................122

Opening Your Phone to a Landscape View ............................................................ 123

Open View of Your Phone - Landscape Mode ........................................................124

Making a Call - Landscape Mode .........................................................................125

Answering a Call - Landscape Mode ....................................................................126

VoiceSignal Commands - Landscape Mode ...........................................................126

Creating and Sending Messages - Landscape Mode ............................................127

Entering Numbers - Landscape mode ..................................................................128

Wireless Sync Email - Landscape Mode ............................................................... 128

E-Mail - Landscape Mode ....................................................................................129

Mobile IM - Landscape Mode ...............................................................................130

Chat - Landscape Mode .......................................................................................130

My Account - Landscape Mode ............................................................................131

Multimedia - Landscape Mode ..............................................................................131

Mobile Web - Landscape Mode .............................................................................131

Section 12: Mobile Web ...........................................................................132

Mobile Web ......................................................................................................... 132

Launching Mobile Web ........................................................................................ 132

Exit Mobile Web ...................................................................................................133

Navigate the Web ................................................................................................ 133

Mobile Web Soft Keys ..........................................................................................133

Links ................................................................................................................... 134

Place a Call While Using Mobile Web ...................................................................134

Section 13: Health and Safety Information .............................................135

Health and Safety Information ............................................................................... 135

UL Certified Travel Adaptor ...................................................................................137

Consumer Information on Wireless Phones ...........................................................137

Road Safety ..........................................................................................................143

Operating Environment .........................................................................................144

Using Your Phone Near Other Electronic Devices ...................................................144

Potentially Explosive Environments .......................................................................146

Emergency Calls ...................................................................................................146

FCC Notice and Cautions .......................................................................................147

Other Important Safety Information .......................................................................148

Product Performance ............................................................................................148

Availability of Various Features/Ring Tones ........................................................... 149

Battery Standby and Talk Time .............................................................................149

Battery Precautions ..............................................................................................149

Samsung Mobile Products and Recycling ..............................................................151

Care and Maintenance ..........................................................................................151

Section 14: Warranty Information ...........................................................152

Standard Limited Warranty ...................................................................................152

Index .........................................................................................................156

The user guide gives navigation instructions according to the default Display Settings>Display
Theme (My Desk) menu. If other themes are set, navigating the phone's menus may be different.

Table of Contents 4

5

Section 1: Getting Started

Topics Covered

• Turning Your Phone On and Off

• Setting Up Voice Mail

• Understanding this User Manual

• Notes and Tips

This section allows you to start using your phone by activating your service, setting
up your voicemail, contacting customer support, or getting an understanding of how
this manual is put together.

Turning Your Phone On and Off

Turning Your Phone On

1. Open the flip, then press .

Note: As with any other radio-transmitting device, do not touch the internal antenna as it affects call quality

and may cause the phone to operate at a higher power level than is necessary. The internal antenna is
located along the top on the back side of your phone.

2. Once the phone finds a signal, the time, date, and day appear in the

display.

3. You’re now ready to place and receive calls.

Note: If the phone is outside the Verizon Wireless coverage area the roaming icon appears in the top

of the display.

Turn Yo ur Ph one O ff

Press for two or more seconds. Your phone powers off.

Setting Up Voicemail

Voicemail allows callers to leave voice messages, which can be retrieved any time.

Note: Once your voicemail account has been set up, you can use the Voicemail selection 6 (under the
Messaging menu) to view details of voice messages in your voicemail box.

Section 1: Getting Started 6

Voicemail Setup*

1. In idle mode, press and hold the 1 ( ) key or dial *86

( ), from your phone or dial your wireless
phone number from any touch-tone phone.

2. When the recorded announcement begins, press # ( ) to interrupt

(if applicable).

3. An easy-to-follow setup tutorial will begin. Follow the instructions to set up

your new password and record a greeting.

Listen to Voicemail

1. In idle mode, press and hold the 1 ( ) key or dial *86

( ), .

2. You are then prompted to enter your password followed by # ( ) key.

3. Follow the recorded prompts to listen to messages, change administrative

options, and so on.

*airtime and long distance charges apply. IN Calling minutes do not apply to Voice Mail setup or retrievals.

Understanding this User Manual

The chapters of this manual generally follow the same order as the menus and
sub-menus in your phone. A robust index for quick reference to most features
begins on page 156.

Also included is important safety information that you should know before using your
phone. Most of this information is near the back of the guide, beginning on
page 135.

The u740 has features and functions that can be performed only in Landscape
mode. The Landscape mode icon will be used to denote those features and
functions.

7

Notes and Tips

Throughout this guide are icons and text that are set apart from the rest. These are
intended to point out important information, quick methods for activating features, to
define terms, and more. The definitions for these methods are as follows:

• Notes: Explain alternative options within the current feature, menu, or sub-

menu.

• Tips: Provide quick or innovative methods for performing functions related to the

subject at hand.

• Important: Points out important information about the current feature that could

affect performance, or even damage your phone.

Section 2: Understanding Your Phone 8

Section 2: Understanding Your Phone

Topics Covered

• Features of Your Phone

• Open View of Your Phone

• Closed View of Your Phone

• Command Keys

• Understanding the Display Screen

• Battery

This section outlines key features of your phone. It also displays the screen and the
icons that are displayed when the phone is in use.

Features of Your Phone

• Domestic and international voice and text messaging service (available on

participating networks).

• High speed data (CDMA 2000 1x Technology)

• EVDO 1x Technology

• Global Positioning (GPS) Technology

• Personal Organizer

• Text Messaging

• Picture Messaging

• Video Messaging

• E-mail Messaging

• Mobile IM

• V Cast

• Chat

• 1.3 Megapixel Camera

• Camcorder

• Advanced Speech Recognition

• Speakerphone

• microSD™ Memory Card Slot

• Music Player

9

• QWERTY keyboard

• Bluetooth

®

Wireless Technology **

**The SCH-u740 supports the following Bluetooth profiles: Headset, Handsfree, Serial Port, Dial Up
Networking and ***OPP (Object Push Profile). The SCH-u740 does not support all Bluetooth OBEX profiles.
Go to www.verizonwireless.com/bluetoothchart to check vehicle/accessory compatibility.

Important: ***OPP (Object Push Profile) is limited to vCard functionality only.

Open View of Your Phone

The following illustration shows the main internal features of your phone:

2. OK Key

3. Left Soft Key

4. Send Key

5. Camera-Camcorder Key

6. Voice Recognition Key

9. Alpha-numeric Keypad

12. Right Soft Key

11. End Key

10. CLR Key

13. Navigation Keys

14. Speaker (Left)

15. Earpiece-Speaker (Right)

1. Internal LCD

8. Microphone

7. Special Function Keys

7. Special Function Keys

Soft key is not functional
in Portrait Mode.

Important: When opening the phone in Portrait Mode or Landscape Mode, it is important that you open the phone
straight up (90 degrees). Opening the phone partially in Landscape Mode and then trying to open the
phone in Portrait Mode may cuase damage to the hinge of the phone.

Section 2: Understanding Your Phone 10

Features

1. Internal LCD: Displays all the information needed to operate your phone.

2. OK Key: Pressing when navigating through a menu accepts the highlighted

choice in a menu.

3. Left Soft Key: This key is used to navigate through menus and applications

by selecting the choice available in the Left Soft key Option.

4. Send Key: Allows you to place or receive a call. In idle mode, press the key

once to access the recent call log.

5. Camera/Camcorder Key: This key allows you to activate the camera.

Press and hold to activate the camcorder.

6. Voice Recognition Key: Press to activate VoiceSignal.

7. Special Function Keys: Enters special characters. Perform various

functions.

8. Microphone: The Microphone allows the other caller to hear you clearly

when you are speaking to them.

9. Alpha-numeric Keypad: Use these keys to enter numbers, letters, and

characters.

10. Clear Key: Deletes characters from the display when you are in text entry

mode. Press to return to the previous menu or screen when navigating
features on your phone.

11. End Key: Ends a call. If you press and hold the END key, the power goes On

or Off. When you receive an incoming call, press to ignore the call and send
the call to voicemail.

12. Right Soft Key: This key is used to navigate through menus and

applications by selecting the choice available in the Right Soft key Option.

13. Navigation Keys: These keys allow you to scroll through the phone menu

options.

14. Speaker (Left): Music, Ringtones, and Sounds are played through the

speaker. This speaker provides stereo sound for multimedia files by acting
as a left stereo speaker.

15. Earpiece-Speaker (Right): The earpiece allows you to hear the other

caller while in Portrait mode. When the phone is in a landscape orientation,
this speaker provides stereo sound for multimedia files by acting as a right
stereo speaker.

11

Closed View of Your Phone

The following illustration shows the main external features of your phone:

Features

1. Hold Key: Allows you to lock/unlock the music keys (i.e. Rewind,

Play/Pause, and Fast Forward) on the front of the phone

2. Power/Accessory Connector: The power/accessory interface connector is

used to plug in the charging accessories and also connect any available
accessory cables to your phone. This connector also allows you to plug in
an optional headset for safe, convenient conversations.

3. Volume Keys: Allows you to adjust the master volume in idle mode (with

the flip open) or adjust the voice volume during a call. To mute the ringer
during an incoming call, press the volume key up or down. When the flip is
closed, press and hold the key, and sub LCD displays.

4. External LCD: External LCD shows signal and battery strength, time, day,

and date. It also displays incoming calls or messages.

5. Rewind Key: Music rewind key.

6. Play/Pause Key: Music play or pause key.

7. Fast Forward Key: Music fast forward key.

8. Speakerphone Key: Press this key to enable/disable the speakerphone

option.

5. Rewind Key

7. Fast Forward
Key

8. Speakerphone
Key

9. microSD™
Card Slot

10. Flash

6. Play/Pause Key

3. Volume Keys

4. External LCD

2. Power/Accessory
Connector

1. Hold Key 11. Camera Lens

Section 2: Understanding Your Phone 12

9.

microSD™ Card Slot: This expansion slot allows you to insert a

microSD™ memory card to add additional memory and storage capacity.

10. Flash: The built-in flash has manual and automatic capabilities.

11. Camera Lens: Allows you to take photos or shoot video.

Command Keys

Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key and the right soft key .

Left Soft Key

Some functions of the left soft key are as follows.

• In idle mode, press the Message (left) soft key to open the Message

menu.

• When the left soft key function is Settings, press the

Settings (left) soft key

to view settings for the feature.

• When the left soft key function is Edit, press the Edit (left) soft key to edit
a Contact or Profile setting.

Right Soft Key

Some functions of the right soft key are as follows.

• In idle mode, press the Contacts (right) soft key to open your Contacts
list.

• When the right soft key function is Options, press the Options (right) soft key

to view more options for the current menu.

Clear Key

The CLR key is used to erase or clear numbers, text, or symbols from the
display. You can also use to return to a previous menu or to return to idle
mode from any menu.

• If you enter an incorrect character, briefly press to backspace (and
delete) the character.

• To erase the previous word in a sentence, press and hold .

• To back up one menu level, briefly press .

• To return to idle mode from any menu, press and hold .

13

End Key

• Press and hold the End key to turn your phone on or off.

• Briefly press once to disconnect a call.

• Press to return to idle mode from any menu, or to cancel the last input.

Send Key

The Send key is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.

• Press once to answer calls.

• Enter a number and briefly press to make a call.

• Press in idle mode to display a list of recent calls to and from your
phone.

• Press twice in idle mode to call the most recently dialed, received, or
missed number.

• Press to pick up a waiting call. Press again to switch back to
the other call.

Navigation Key

Use the directional keys on the navigation key to browse menus, sub-menus, and
lists. Each key also acts as a shortcut to launch applications. The navigation key can
be customized to launch your favorite application. See "Set Shortcut Key" on page
86 for more information.

Hold Key

Press the Hold key ( ) to lock/unlock the touch pad (i.e. Rewind,

Play/Pause, and Fast Forward) on the front of the u740.

Note: The music touch keys are only functional when the backlight is on.

Speakerphone Key

Press the Speakerphone key ( ) to switch from using the earpiece to the
speakerphone before or during a call. Use the volume keys (located on the left side
of your phone) adjust the volume. Press the speakerphone key to enable and disable
the speakerphone option.

Section 2: Understanding Your Phone 14

The following functions are only applicable in Landscape mode.

For more information on Landscape mode, refer to "Section 11: Landscape Mode"
on page 122.

NumLock Key

Press in landscape mode to lock/unlock text entry 123.

Shift Key

Press in landscape mode to cycle between upper case (ABC), lower case
(abc), or initial caps (Abc) for characters in ABC mode

Fn Key

Press in landscape mode to dial vanity numbers. For example to dial
1-800-SAMSUNG, enter the number 1-800 using the gray numeric keys. Then press

, and use the QWERTY keyboard to enter SAMSUNG and press

.

Enter Key

Press in landscape mode to move the insertion point to the next line in a
message. When in the main menu screen, press to access menus and sub-menu
items.

Spacebar Key

Press the Spacebar () in landscape mode to insert spaces between words or
characters.

Understanding the Display Screen

The top line of your phone’s display contain icons that
indicate network status, battery power, signal strength,
connection type and more.

The light blue line of the idle screen shows icons that
indicate feature and function status. The following list
contains icons that may appear in your display.

15

Display icons

Signal Strength: Always appears when your phone is on and indicates
the current signal strength. More bars indicate a stronger signal.

Standalone Mode: Appears when Standalone Mode is on. When on, all
RF functions for your phone are disabled, and you cannot use your

phone to place or receive calls.

Roaming Indicator: Your phone is outside your home area. While
roaming, another wireless provider may be handling your call. The

service rate for the call may be higher than those made from within your
home area. Please refer to Verizon Wireless for roaming rates.

Digital: Appears when your phone is receiving digital data.

1X Protocol: Indicates your phone is using the CDMA 1X protocol.

EVDO: Appears when your phone is using the EVDO protocol.

EVDO/1X: The EVDO/1X protocol is capable of high-speed broadband

data (3G).

EVDO/2G: Indicates your phone is using the EVDO 2G protocol.

SSL: Indicates the secure socket layer is active transmits your

communications over the internet in an encrypted format.

Voice Privacy: Prevents eavesdropping over a CDMA traffic channel.

No service indicator: Your phone cannot find a signal because you’re

outside a service area. You cannot make or receive calls. Wait for a
signal or move to an open area to find a signal. This indicator always
appears when you first turn on your phone and disappears once service
is located.

Dormant: Indicates no incoming or outgoing data.

Voice Call: Indicates a call in progress. When dialing a number, this icon

flashes until the call connects.

Section 2: Understanding Your Phone 16

Data Call: Indicates a call in progress. When dialing a number, this icon
flashes until the call connects.

E911: Global Positioning Service (GPS) for 911 is set to On for
emergency calls only.

Location On: Global Positioning Service is set to On for location and 911
calls.

Bluetooth: Indicates that Bluetooth wireless technology is active.

Bluetooth Active: Indicates that Bluetooth wireless technology is

connected and receiving or pushing data.

Bluetooth Connected: Indicates Bluetooth wireless technology is active
and connected.

Dial ABC Lock: Indicates that letter entry is active in the dialing screen.
Pressing the Fn key while dialing toggles this lock. (eg. Allows dialing

the lettters "SAMSUNG" in "1-555-SAMSUNG".

Number Lock: Indicates NumLock is active. The NumLock Key changes
Text Entry Mode from Abc to 123. The NumLock icon only displays

when using the Verizon Wireless Mobile Web.

Hold - Keys Lock: Indicates that music player keys are locked and are
not functional. Press again to unlock the music player keys.

Battery Level: More bars indicate a greater charge. When the battery is
low, an empty battery icon flashes and the phone sounds an alert, which

indicates your phone is about to shut down.

TTY: Indicates that TTY is enabled.

All Sounds Off: The ringer is silenced for all alerts, incoming calls, and

incoming messages.

Alarm Only: Your phone will only ring when the set alarm sounds.

Vibrate Only: Your phone vibrates upon receiving a call.

Speakerphone: Your phone switches to speakerphone instead of

earpiece.

17

Missed Calls: Your phone displays this icon when calls are missed.

Message: You’ve received a new text, page or web alert message.

You’re also notified of a new message by animations and sound.

Calendar Appointment: Your phone displays this icon when you have a
calendar appointment scheduled.

Voicemail: You’ve received a voicemail message, page or web alert
message. You have one or more unread voicemail messages in your

voicemail box. (Only applicable on the Verizon Wireless Network.)

Alarm On: Indicates that your phone has a set alarm.

Auto Answer: Automatic answer is enabled. Your phone automatically

picks up calls after the designated time with the stereo headset or when
your bluetooth headset or bluetooth hands-free car kit is connected.

Section 2: Understanding Your Phone 18

Dialogue boxes

Dialogue boxes prompt for action, inform you of status, or warn of situations such as
low memory. Dialogue boxes and their definitions are outlined below.

• Choice

• Example: “SAVE MESSAGE DRAFT?”

• Reconfirm

• Example: “ERASE ALL MESSAGES?”

• Performing

• Example: “SENDING...” “CONNECTING..”

• Completed

• Example: “MESSAGE SENT!”

• Information

• Example: “NEW MESSAGE”

• Error

• Example: “SYSTEM ERROR!”

• Warning

• Example: “BATTERY LOW,” “MEMORY FULL!”

Battery

Note: This phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel

charger.

Important: Although the phone can be used while the battery is charging, the battery must be fully charged
before first use, otherwise you could damage the battery.

19

Using A Non-Supported Battery

Samsung handsets do not support the use of a
non-supported battery.

When using a non-supported battery you will hear a
series of beeps and you will see a warning message
that indicates “NON SUPPORTED BATTERY SEE USER
GUIDE” If you receive this warning, battery charging
has been disabled.

Samsung charging accessories (i.e. travel adapter, and
cigarette lighter adapter) will only charge a Samsung
approved battery.

To continue use of your handset press .

Note: When using a non-supported battery the handset can only be used for the duration of the life of the
battery and cannot be recharged.

Important: Using a non-supported battery may cause damage to your phone. Use a Samsung supported
battery only.

Install the Battery

1. Slide the battery cover down and lift up to remove it.

Section 2: Understanding Your Phone 20

2.

Insert the top end of the battery into the phone housing by using the
direction of the arrow printed on the battery. The gold contacts on the top of
the battery should match up with those on the phone.

3. Push the bottom end of the battery down until it snaps into place.

4. Slide the battery cover up until it snaps into place.

Remove the Battery

1. Slide the battery cover down and lift up to remove it.

21

2.

Use your finger to lift the battery (bottom end first) up and away from the
phone.

Charge the Battery

Your phone is powered by a rechargeable standard Li-ion battery. Only use
Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Using other accessories may invalidate your
warranty and may cause damage.

Section 2: Understanding Your Phone 22

Travel Charger

The travel charger is a convenient, light-weight charger that rapidly charges your
phone from any 120/ 220 VAC outlet.

1. Plug the large end of the travel charger into a standard 120/220 VAC wall

outlet.

2. Insert the smaller end of the travel charger into the charger/ accessory

connector on the left side of the phone.

Note: You can use your phone while charging, however, the battery charges faster if the phone is turned
off.

Battery Indicator

The battery indicator in the upper-right corner of the display indicates battery
power level. Four bars indicate a full charge, while an empty icon indicates an
almost empty battery. Two to three minutes before the battery becomes too low to
operate, a blinking empty battery icon appears and a tone sounds. If you
continue to operate the phone without charging, it shuts down.

23

Section 3: Call Functions

Topics Covered

• Making a Call

• Answering a Call

• In-Use Menu Options

• Recent Calls

•Roaming

•TTY

• VoiceSignal®

This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.

Making a Call

1. At the idle screen, enter the number you want to call using the gray

numeric keypad.

2. Press .

In Landscape mode

Note: In landscape mode, you can only make calls using the speakerphone.

• For more detailed procedures, refer to "Making a Call - Landscape Mode" on

page 125.

Making Calls Using Contacts

Contacts are entries that you create to store names, numbers, and other information
for people or groups of interest. If you’ve already entered information into your
Contacts list, you can recall and dial the contact easily. See "Adding a Contact" on
page 50 for information on creating contacts.

1. At the idle screen, press the right soft key Contacts.

2. Press the navigation up and down keys until the contact that you want to

call is highlighted.

Section 3: Call Functions 24

Tip: To quickly locate a name, press (or multi-press) any key on the keypad that corresponds to the first,
second, and/or third letters of the contact’s name.

3. When the desired contact is highlighted, press VIEW. Details for the

contact appear in the display.

4. If the entry contains more than one number, use the up or down navigation

key to highlight the desired number.

5. Press to call the number.

In Landscape mode

Note: In landscape mode, you can only make calls using the speakerphone.

• For more detailed procedures, refer to "Making Calls Using Contacts - In
Landscape Mode" on page 125.

Answering a Call

When you receive an incoming call, press the key to answer the call or right
soft key Ignore to send the call to voicemail, or left soft key Quiet to
silence the ringer.

In Landscape mode

Note: To change the answer options, see "Answer Options" on page 92.

• For more detailed procedures, refer to "Answering a Call - Landscape Mode"
on page 126.

Answering Call-Waiting Calls

• When you receive a new call while on a call, press to answer the new
call or let the new call go to your voicemail.

• If you press and answer the incoming call, the original caller is placed

on hold. To return to your original call press .

25

In-Use Menu Options

Access numerous menus and features even while in a call.

Note: If the call is disconnected while accessing the In-Use Option, the In-Use Option disappears from the
display and the phone eventually returns to idle mode.

1. While in a call, press the right soft key Options. The following menu

items appear in the display.

• Messaging: Open the Messages menu.

• Contact List: Open the contacts to view.

• Recent Calls: Displays your recent incoming, missed and outgoing calls.

• Bluetooth Menu: Displays the Bluetooth menu.

• Main Menu: Displays the Main menu.

• Notepad: Displays the Notepad menu.

• Voice Record: Record a voice memo.

2. Use the navigation key to highlight a menu. Press to open the

highlighted menu or to activate the feature.

Recent Calls

When you place, miss, or receive a call, a record of the call is saved in Recent Calls,
which is a listing of the different types of calls you can either receive or make. These
types of calls are listed below.

• Missed: Displays any missed calls.

• Received: Displays any received calls that were answered.

• Dialed: Displays all outgoing calls made from your phone.

• All: Displays all missed, received, and outgoing calls made from your phone.

Section 3: Call Functions 26

Viewing Call Information

Recent Calls retains information such as the duration, date and time, and whether
the call was received, dialed, or missed.

1. At the idle screen, press the key.

Or press MENU then press the right navigation key to highlight
Recent Calls and press . Use the navigation key to select a category
and press . Continue to step 3.

2. Press the left or right navigation key to highlight the call log that contains

the number you want to view and press .

3. Press the down navigation key to highlight the desired number.

4. Once the desired number is highlighted, press OPEN.

5. The following information appears in the display:

• Call Type: The title bar displays if the call is a missed, dialed, or received.

• Name: If the caller is in your Contacts list, their name is listed here. This option
only appears if the caller is in your Contacts list.

• Number: Displays the telephone number as well as the appropriate icon to
indicate mobile, work, or home number.

• Time: The time of the call.

• Date: The date of the call.

• Duration: The duration of the calls made or receive.

6. Press the right soft key Options to display the following options:

• Save: Save the number to your Contacts list.

• Details: Displays details about the caller if entered in Contacts.

• Erase: Delete the call from Call History.

• Lock/Unlock: locks or unlocks the entry to prevent accidental deletion.

• Erase All: Delete all calls from Call History.

• View Timers: Select to view the call timers for your phone.

7. Press the down navigation key to highlight an option. Press to enter

the highlighted option’s sub-menu.

27

Call History Icons

When you view Recent Calls, an icon to the left of the number indicates the type of
call.

Indicates a Missed call

Indicates a Dialed call

Indicates a Received call

Making Calls Using Call History

1. At the idle screen, press then press up or down navigation key until

the desired number is highlighted.

2. Press to call the highlighted number. Or, you can press OPEN,

then press to call the highlighted number.

Creating or Updating Contacts Using Call History

1. At the idle screen, press then press up or down navigation key until

the desired number is highlighted.

2. Press the right soft key Options. Save is highlighted. Press .

3. Use the up or down navigation keys to highlight Create New Contact or

Update Existing. Press .

4. If you selected Create New Contact, the following types are available.

• Mobile 1

• Mobile 2

• Home

• Work

• Fax

5. If you selected Update Existing, proceed to step 11.

6. Use the up/down navigation keys to highlight the desired entry type

(mobile, home, work, etc.) then press .

7. Enter a name for the entry using the keypad. Press the left soft key

Abc if you wish to select a different method of text entry, such as Word,

Abc, ABC, 123, or Symbols.

Section 3: Call Functions 28

8.

To assign a Speed Dial location, use the up/down navigation key to
highlight the number you would like to assign to a Speed Dial location and
press the right soft key

Options. Highlight Set Speed Dial and

press .

Highlight an unassigned location and press SET. A confirmation
message appears in the display, Ye s is highlighted, press to add
Contact to the speed dial location.

Note: Voicemail is assigned to Speed Dial location 1.

Note: You can assign a speed dial location to each number associated with the contact (Home, Work,

Mobile 1, Mobile 2, and Fax.).

9. When you’re finished entering information for the entry, press SAVE.

The entry is saved to your Contacts.

10. If you selected Update Existing, the Contact List opens in Search mode.

Use the navigation key to browse through entries, or enter the name of the
entry using the keypad. Once you’ve highlighted the entry you wish to add
the number, press .

11. An UPDATE EXISTING pop-up screen with a selection list of entry types

displays. Use the up or down navigation keys to highlight the desired type
then press . The number is added to the selected entry and saved to
your Contacts.

Delete Call History Entries

1. At the idle screen, press then press up or down navigation key until

the desired number is highlighted.

2. Press the right soft key Options. A pop-up menu appears in the

display.

3. Press the down navigation key to highlight Erase and press . Select

Yes or No at the ERASE ENTRY? pop-up screen.

4. Press .

29

Delete All Call History Entries

1. At the idle screen, press .

2. Press the right soft key Options. A pop-up menu appears in the

display.

3. Press the down navigation key to highlight Erase All and press . Select

Yes or No at the ERASE ALL ENTRIES? pop-up screen.

4. Press .

Roaming

What is Roaming?

Your phone can roam on other digital networks. Roaming occurs when you travel
outside a pre-designated coverage area. The roaming icon displays when roaming is
active and extra charges may apply when making or receiving calls.

Note: Some features may be unavailable while roaming.

Roaming Options

The following roaming options are available:

• Home Only - Your phone is available for normal operation only in the designated

coverage area.

• Automatic: The preferred roaming list is used to acquire service.

Note: Contact your service provider for information regarding preferred systems.

To change your Roaming option, follow these steps:

1. Press MENU. Use the right navigation key to highlight Settings &

Tools and press .

2. Press 6 () Phone Settings.

3. Press 7 () System Select.

4. Use the up or down navigation keys to choose the setting you want, and

press .

Section 3: Call Functions 30

TTY

Your phone is fully TTY compatible. Connect the TTY equipment to the headset jack,
which is located on the left side of the phone. Before you can use your phone with a
TTY device, you’ll need to enable TTY functions in the phone.

1. Press MENU. Use the right navigation key to highlight Settings &

Tools and press .

2. Press 7 () Call Settings.

3. Press 3 () TTY Mode. The TTY Mode screen displays.

4. A warning appears in the display stating “ENABLING TTY WILL DISABLE

HEADSET AUDIO. CONTINUE?”

Use the up or down navigation key to highlight Yes and press to
proceed to TTY MODE screen.

Use the up or down navigaton key to highlight No and press to return
to Call Settings menu.

5. Use the up or down navigation keys to select one of the following:

• TTY Full

• TTY + Talk (VCO)

• TTY + Hear (HCO)

• TTY Off

6. Press to make your selection. The TTY MODE SET screen displays.

VoiceSignal™

VoiceSignal is advanced speech recognition software that can be used to activate a
wide variety of functions on your phone. VoiceSignal software automatically voice
activates all contacts for voice dialing and searching, no pre-recording or training
needed. Speak phone numbers naturally to dial, and use voice commands to launch
applications and navigate phone menus.

VoiceSignal Settings

You can adjust the settings and preferences for VoiceSignal by opening Voice
Commands menu. Using this menu, you can change the following Voice Command
features:

• Tips for adapting Digit Dial

• Digit Dial Adaptation

• Reset Digit Dial Adaptation

• Call Digit Dialing

• Call Name Dialing

31

• Send Text Message.

• Send Video Message.

• Send Picture

• Name Lookup

• Opening Apps

• Checking Phone Status

To access the VoiceSignal Settings menu, follow these steps:

1. At the idle screen, press MENU. Use the right navigation key to

highlight Settings & Tools and press .

2. Press 2 () Tools, then 1 () Voice Commands, and

2 () Voice Settings.

3. Use the navigation keys to select the setting you want to change. The

following options are available:

• Choice Lists: If VoiceSignal is not absolutely confident that it has correctly

identified a name or number, it can display a choice list of up to three
possibilities, and prompt you to confirm the correct one. You can control when
choice lists appear by changing the Choice Lists setting to the following:

• Automatic: VoiceSignal displays a choice list when it is not confident it has
identified the correct choice from among multiple alternatives.

• Always On: When there are multiple alternatives, VoiceSignal always displays a
choice list.

• Always Off: VoiceSignal never displays a choice list. Instead, the application picks
the best from among the possible choices.

• Sensitivity: In VoiceSignal, sensitivity controls the balance between rejecting too

much, which means the phone frequently does not recognize names, numbers,
or commands, and rejecting too little, which means it frequently recognizes
something even if nothing was said. When VoiceSignal rejects an utterance, it
displays a message such as “Please repeat…” or “No match found.” If you
frequently experience these messages, you might be able to get better
recognition by adjusting the Sensitivity setting toward Reject Less. If you
frequently experience false activations (VoiceSignal detects a wrong match), you
might be able to get better performance by adjusting the Sensitivity setting
toward Reject More.

• Digit Dialing: Use the Digit Dialing menu to adapt digit dialing to your voice.

• Adapt Digits: Lets you adapt digits, which can improve voice recognition of phone
numbers. Adaptation takes about 180 seconds.

• Reset Digits: Erases any digit adaptation you have done and resets digit
recognition to the factory default. If you have not adapted digits, this option is
grayed out.

Section 3: Call Functions 32

• Sound: You can customize the VoiceSignal user interface by turning playback on

or off for prompts, names, and numbers. You can also change the speed and
volume of name playback.

• Prompts: Turns playback on or off for prompts such as
“Say a command.”

• Digits: Turns playback on or off for digits, for example, when confirming a phone
number.

• Names: Turns playback on or off for names.

• Name Settings: Adjusts the speed and volume of name playback.

• VoiceMode: Lets you adapt words, which can improve voice recognition in the

Picture messaging and Video messaging clients. See "Entering Text Using
VoiceMode" on page 45, for detailed information.

• Adapt VoiceMode: Lets you Adapt VoiceMode to your voice, which improves voice
recognition of VoiceMode. You must use the adapt VoiceMode feature in a quiet
room for best results.

• Reset VoiceMode: Resets Voicemode to default setting.

• Tutorial: Displays the VoiceMode tutorial.

• About: Displays information about VoiceSignal including version number, build

number, and device number.

You can also access the VoiceSignal Settings menu by following these steps:

1. In idle mode, press the key.

2. Press the right soft key Settings.

3. Use the navigation keys to select the setting you want to change.

Adapting VoiceSignal

Voice dialing works well for most people without special adaptation. However,
people with strong accents or unique voice characteristics may receive better results
after adapting the system to match their voices.

You should adapt Digit Dial only if the system is frequently unable to recognize your
speech. After you adapt Digit Dial, your phone is customized to your voice, and your
voice only. Others will not be able to use it unless they reset the phone to factory
defaults.

Adaptation involves recording several digit sequences to adapt the system to the
unique properties of your voice. The adaptation process takes about three minutes.

Tips for adapting Digit Dial

• Adapt digits in a quiet place.

• Make sure you wait for the beep before starting to speak.

• Speak clearly, and say each digit distinctly.

33

• If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.

• Only adapt digits if you regularly have problems with digit dialing. Once
adapted, digit dialing will not work as well for other people using your phone.

• Adapt Digit Dial to your voice.

Digit Dial Adaptation

To access the Adapt Digits menu, follow these steps:

1. At the idle screen, press MENU. Use the right navigation key to

highlight Settings & Tools and press .

2. Press 2 () Tools, then 1 () Voice Commands.

3. Press 2 () Voice Settings, then 3 () Digit Dialing.

4. Adapt Digits is highlighted. Press .

5. A short description of the Adapt Digits displays.

6. Read the description until you are comfortable to proceed, then press .

7. Your phone displays the first digit sequence and “Please say” plays through

the speaker followed by the four digits appearing in the display.

Wait for the beep and repeat the digits using your normal tone of voice.

8. After a moment, the phone plays back the recording and prompts “Did the

recording sound ok?” If the recording was good, say “Yes.” If you need to
re-record, say “No.”

If you say “No,” the phone prompts you to pronounce the digits again. Wait
for the beep and then re-record. Repeat this step until you’re satisfied with
the recording.

9. After confirming that the recording sounds ok, repeat the recording process

with the next set of digits. After ten sets of digits, the phone indicates that
adaptation is complete.

Reset Digit Dial Adaptation

This option erases an adaptation and resets Digit Dial to its original state.

1. At the idle screen, press MENU. Use the right navigation key to

highlight Settings & Tools and press .

2. Press 2 () Tools, then 1 () Voice Commands.

3. Press 2 () Voice Settings, then 3 () Digit Dialing.

4. Highlight 2 () Reset Digits and press . The Reset Digit

Adaptation screen displays requesting confirmation of reset.

Section 3: Call Functions 34

Note: If you have not performed the Adapt Digits function, the Reset Digits option will not be accessible.

5. Press to proceed. Digit Adaptation Reset is completed.

VoiceSignal Commands

The following is a list of functions that you can perform using VoiceSignal speech
recognition on your phone.

• Call <Name or #>: Dial by saying a Name in your Contacts List or a Name and
a Location (home, work, mobile).

• Send <Message Type>: Send a picture, text, or video, message to a number
or to someone in your Contacts List.

• Lookup <Name>: Open the contact record for any name in your Contacts List.

• Go to <Menu>: Open any application installed on your device.

• Check <Item>: Provides details of your phone status, voicemail, missed calls,
time, battery level, signal strength and master volume level.

• My Account: Provide helpful information on how to use VoiceSignal. See "My
Account - Landscape Mode" on page 126.

• Help Guide: Provides a helpful tutorial on how to use VoiceSignal.

Call Digit Dialing

Digit Dial allows you to dial any phone number by simply speaking the digits into the
phone. No training is necessary, and Digit Dial is programmed to understand natural
speech.

1. In idle mode, press the key.

2. After a brief pause, a list of optional commands appears in the display and

the audio prompt “Say a command” plays through the earpiece or
speakerphone--if it is enabled.

3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.

4. “Say the name or number” plays through the earpiece.

5. To use Digit Dialing, say the area code and number that you want to dial

into the microphone, clearly and naturally.

6. The number that you said is repeated through the earpiece and your phone

dials the number.

7. If VoiceSignal is not sure of the number that you said, a list of possible

matches appears in the display.

8. You’re asked to confirm the correct number as VoiceSignal displays the

results. Say “Yes” or “No” to confirm or reject the number when prompted.

35

Call Name Dialing

To use Name Dial, you’ll need to have entries stored in your Contacts list.
See page 50 for information on creating a Contacts list.

1. In idle mode, press the key.

2. After a brief pause, a list of optional commands appears in the display and

the audio prompt “Say a command” plays through the earpiece.

3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.

4. “Say the name or number” plays through the earpiece or speakerphone--if

it is enabled.

5. To use Name Dialing, say the name of the contact that you want to dial.

6. The name that you said is repeated through the earpiece and your phone

dials the number.

7. If VoiceSignal is not sure of the number that you said, a list of possible

matches appears in the display.

8. You’re asked to confirm the correct number as VoiceSignal displays the

results. Say “Yes” or “No” to confirm or reject the number when prompted.

9. The location is repeated through the earpiece and your phone dials the

number.

Send Text MSG

1. In idle mode, press the key.

2. A list of commands appears in the display and the audio prompt “Say a

command” plays through the earpiece or speakerphone--if it is enabled.

3. Say “Send Text” at a distance of 3-12 inches from the microphone.

“Say the name or number” plays through the earpiece or speakerphone.

4. Say the name exactly as it is displayed in your Contacts list, first name

followed by last name.

5. The contact name appears in the To: field. See "Creating and Sending Text

Messages" on page 61 for more information.

Send Picture

Send Picture allows you to access Picture message, you can use entries stored in
My Pictures or you can take a picture of an image using the camera.

1. In idle mode, press the key.

2. A list of commands appears in the display and the audio prompt “Say a

command” plays through the earpiece or speakerphone--if it is enabled.

Section 3: Call Functions 36

3.

Say “Send Picture ” at a distance of 3-12 inches from the microphone.

“Say the name or number” plays through the earpiece or speakerphone.

4. Say the name exactly as it is displayed in your Contacts list, first name

followed by last name.

5. The contact name appears in the To: field. See "Creating and Sending

Picture-Video Messages" on page 63 for more information.

Name Lookup

To perform a name lookup, you’ll need to have some entries in your Contacts list.

1. In idle mode, press the key.

2. A list of commands appears in the display and the audio prompt “Say a

command” plays through the earpiece or speakerphone--if it is enabled.

3. Say “Lookup” at a distance of 3-12 inches from the microphone. “Say the

name or number” plays through the earpiece or speakerphone.

4. Say the name exactly as it is displayed in your Contacts list, first name

followed by last name.

5. The contact name appears in the display with other information that you’ve

entered for that contact.

Opening Applications

To open any application on your phone using VoiceSignal perform the following.

1. In idle mode, press the key.

2. A list of commands appears in the display and the audio prompt “Say a

command” plays through the earpiece or speakerphone--if it is enabled.

3. Say “Go To” at a distance of 3-12 inches from the microphone. A list of

options displays and a prompt of “Please choose” plays through the
earpiece or speakerphone.

4. The menu option spoken opens.

Checking Phone Status

1. In idle mode, press the key.

2. A list of commands appears in the display and the audio prompt “Say a

command” plays through the earpiece or speakerphone--if it is enabled.

3. Say “Check” at a distance of 3-12 inches from the microphone. “Please

choose” plays through the earpiece or speakerphone. Valid “Check”
commands are:

• "Check Status" — Displays and announces all of the available status indicators in
sequence through the earpiece or speakerphone—if it is enabled.

37

• "Check Voicemail" — Displays the number of new voicemail messages.

• "Check Messages" — Displays and announces the number of new voicemail,
TXT, and Picture messages through the earpiece or speakerphone—if it is
enabled.

• "Check Missed Calls" — Displays the missed call log.

• "Check Time" — Displays and announces the current time through the earpiece
or speakerphone—if it is enabled.

• "Check Battery" — Displays and announces the current battery level through the
earpiece or speakerphone—if it is enabled.

• "Check Signal Strength" — Displays and announces the current EVDO and 1x
signal strength levels through the earpiece or speakerphone—if it is enabled.

• "Check Volume" — Displays and announces the current master volume setting
through the earpiece or speakerphone—if it is enabled.

4. The option spoken opens.

My Account

Using VoiceSignal, you can check your Verizon Wireless account status by voice
command.

Note: This features launches the browser to your account page and requires a data plan and is subject to
Verizon Wireless data coverage.

• For more detailed procedures, refer to "My Account - Landscape Mode" on
page 126.

Help Guide

Provides helpful information on how to use VoiceSignal.

1. In idle mode, press the key.

2. A list of commands appears in the display and the audio prompt “Please

say a command” plays through them earpiece or speakerphone—if it is
enabled.

3. Say, "Help Guide" at a distance of 3-12 inches from the phone in a natural

voice.

4. The tutorial appears in the displays.

Section 4: Menu Navigation 38

Section 4: Menu Navigation

Topics Covered

• Menu Navigation

• Navigation Key Shortcuts

• Menu Outline

This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.

Menu Navigation

Access menus using the navigation keys, two soft keys , or use a
shortcut.

1. In idle mode press MENU. The first of several menus appear in the

display.

2. Use the navigation keys to browse phone menus.

3. Press to enter the menu or sub-menu presently appearing in the

display.

Return to the Previous Menu

Press to return to the previous menu.

Navigate Using Shortcuts

You can also access menus and sub-menus using menu numbers. This method is
often called a “shortcut.” To shortcut to a menu or sub-menu, press MENU,
then enter the menu and/or sub-menu number(s) for the feature in question. Use
"Navigation Key Shortcuts" on page 39, for looking up the menu shortcut number.

1. In idle mode, press MENU. The CONTACTS menu is launched.

2. Press the number of the menu. Example, press 3 () Groups,

2 () Business.

39

Navigation Key Shortcuts

In idle mode, press a navigation key (as illustrated below) to launch its
corresponding application.

The Navigation key can be customized to select other functions. See "Set Shortcut Key" on page 86 for
detailed information on how to customized your Navigation key.

Note: Mobile Web and Get Now applications can only be accessed in Landscape mode.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings, 2 () Set Shortcut Key. The

shortcut key list displays.

3. Use the navigation key to change the setting and press to save your

selection.

Menu Outline

The following list shows the menu structure and indicates the number assigned to
each option.

GET IT NOW

1: Music & Tones

1: V CAST Music
2: Get New Ringtones

1: Get New App.

3: My Ringtones

1: Get New Ringtones

1: Get New App.

Section 4: Menu Navigation 40

4: My Music
5: My Sounds

1: Record New

6: Sync Music

2: Picture & Video

1: V CAST Videos
2: Get New Pictures

1: Get New App.
3: My Pictures
4: My Videos
5: PIX Place
6: Take Pictures
7: Record Videos

3: Games

1: Get New App.

4: News & Info
5: Tools on the Go

1: Get New App.

6: Extras

1: Get New App.

MESSAGING

1: New Message

1: TXT Message
2: Picture Message
3: Video Message
4: Sketch Message
5: Postcard Message
6: Email Message

2: Inbox
3: Sent
4: Drafts
5: Wireless Sync Email
6: Voicemail
7: E-mail
8: Mobile IM

9: Chat

CONTACTS

1: New Contact

41

2: Contact List
3: Groups

1: No Group
2: Business
3: Colleague
4: Family

5: Friends
4: Speed Dials
5: My Name Card

RECENT CALLS

1: Missed
2: Received
3: Dialed
4: All
5: View Timers

SETTINGS & TOOLS

1: My Account
2: Tools

1: Voice Commands

1: Voice Dial
2: Voice Settings
3: Menu Readout

2: Calculator

1: Normal
2: Tip

3: Converter
3: Calendar
4: Alarm Clock
5: World Clock
6: Stop Watch
7: Notepad

3: Bluetooth Menu

1: Add New Device

4: Sounds Settings

1: Master Volume
2: Call Sounds

1: Call Ringtone

1: Get New Ringtones

Section 4: Menu Navigation 42

2: Call Vibrate

3: Alert Sounds

1: TXT Message

1: Tone

1: Get New Ringtones
2: Vibrate
3: Reminder

2: Picture-Video Message

1: Tone

1: Get New Ringtones
2: Vibrate
3: Reminder

3: Voicemail

1: Tone

1: Get New Ringtones
2: Vibrate
3: Reminder

4: Device Connect
4: Dial Sounds
5: Keypad Volume
6: Earpiece Volume
7: Service Alerts

1: ERI

2: Minute Beep

3: Call Connect
8: Power On/Off

1: Power On

2: Power Off

5: Display Settings

1: Banner

1: Personal

2: ERI Banner
2: Backlight

1: Display

1: Duration
2: Brightness

2: Keypad
3: Contrast
4: Wallpaper

43

1: Main Screen

2: Front Screen
5: Display Themes
6: Dial Fonts
7: Clock Format

6: Phone Settings

1: Standalone Mode
2: Set Shortcut Key
3: Flip Duration
4: Language
5: Location
6: Security
7: System Select
8: NAM Selection
9: Quick Search

7: Call Settings

1: Answer Options
2: Auto Retry
3: TTY Mode
4: One Touch Dial
5: Voice Privacy
6: Call Restrictions

1: Outgoing
2: Incoming

3: Contacts
7: Data Settings
8: DTMF Tones

8: Memory

1: Save Options
2: Phone Memory
3: Card Memory

9: Phone Info

1: My Number
2: SW Version
3: Icon Glossary

Section 5: Entering Text 44

Section 5: Entering Text

Topics Covered

• Changing the Text Entry Mode

• Entering Text Using VoiceMode

• Entering Text Using Word Mode

• Entering Upper and Lower Case

• Entering Symbols

• Entering Numbers

This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text entry system to reduce the amount of key strokes associated with entering text.

Changing the Text Entry Mode

1. While composing a message in the Text area, press the right soft key

Options to display the following options:

• Save As Draft: Save the message to your Draft folder.

• Add Graphic: Lists preloaded and downloaded graphics to add to the message.

• Add Animation: Lists preloaded and downloaded animations to add to the
message.

• Add Sound: Lists preloaded and downloaded sounds to add to the message.

• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key New and erase
messages by pressing the left soft key Erase.

• Add Name Card: Select from My Name Card or Contacts to add to the message.

• Edit Text Format: Change font size, text alignment, style, background and color.

• Priority Level: Save the message with a High or Normal priority.

• Callback #: Provides the option to send a callback number with the message.

• Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has been
received.

• Cancel Message: Cancels the message and returns you to the New Message
menu

45

2.

While composing a message, press left soft key Abc to display a

pop-up menu with the following Text Entry Mode options:

• VoiceMode

• Word*

• Abc

• ABC

• 123

• Symbols

Note: *Word is only available in Portrait mode.

Entering Text Using VoiceMode

VoiceMode dictation software allows you to convert your speech to text when

sending a Text or Picture-Video message. Combining VoiceMode with the Send Text,
Send Picture and Send Video voice commands, you can address, compose, and send
a text message using just your voice and a few keys.

Entering Text

1. In idle mode, press the left soft key Message, then press

1 () New Message.

2. Press 1 () TXT Message, 2 () Picture Message, or

3 () Video Message.

3. Enter the phone number or email address of the recipient, then press the

down navigation key to move to the Text field.

4. Press the left soft key Abc to display a pop-up menu containing text

entry mode options.

5. Abc is highlighted by default. Use the up/down navigation keys to highlight

VoiceMode, then press . The text entry mode indicator changes from

Abc to Voice.

6. Press and hold . A pop up “YOU NEED TO ADAPT VOICEMODE. ADAPT

NOW?” screen displays.

7. Yes is highlighted, press twice to Adapt VoiceMode. This will take

about 3 minutes to complete.

8. After Adapting VoiceMode is complete, then begin speaking your text slowly

and clearly into the microphone to add text to your message.

9. Release the key when you are finished speaking or to take a break. Press

and hold when you are ready to resume speaking.

Section 5: Entering Text 46

Tips for Text Entry Using VoiceMode

• Use VoiceMode in a quiet place.

• Make sure you press and hold the key before starting to speak.

• Speak clearly, and say each word distinctly.

• Pause for a second between each word.

• If you make a mistake or VoiceMode misunderstands you while dictating a
message, complete the sentence or message, then correct any errors using the

navigation and 0 () keys.

Correcting Errors

VoiceMode recognizes the most frequently used word that matches the word you
spoke into the microphone. To correct a VoiceMode error, do the following:

1. Use the navigation keys to highlight the word to be changed.

2. Press 0 ( ) to display other words from the VoiceMode dictionary, if

available, or to enter the correct word, if it is not in the dictionary.

3. Use the navigation keys to highlight the desired word, then press to

enter the selected word in your message.

Entering Text Using Word Mode

Word recognizes the most commonly used word for any sequence of key presses

and inserts that word into your message. It’s much faster than the traditional method
of text entry (Abc) and requires only one key press per letter of the word that you’re
spelling.

1. In idle mode, press the left soft key Message, then

press 1 () New Message, 1 () TXT Message to compose a
new text message.

2. Enter the phone number or email address of the recipient, then press the

down navigation key to move to the Text field.

3. Press the left soft key Abc to display a pop-up menu containing text

entry mode options.

4. Abc is highlighted by default. Use the up/down navigation keys to highlight

Word, then press .

47

Now, for practice, enter the word “Hello” into your message by pressing
each of the following keys only once:

Word recognizes that the most frequently used word for the sequence of numbers
entered. The word you just entered is “HELLO.” If more than one word shares the
same sequence, Word provides the most common of the two. Press 0 ( ) to
display other words in the dictionary, if available.

Entering Upper and Lower Case

• Enter characters while in ABC mode by pressing the key that contains the
desired characters. Press 4 ( ) for “G”.

• Press the key repeatedly to cycle through other available characters for that
key.

• Pause briefly when the desired character appears in the display to accept the
character and therefore insert it into the message.

• Press # ( ) to enter a space.

• To cycle between uppercase, lower case, and initial caps for characters in ABC
mode, briefly press * ().

In Landscape mode

• Enter characters while in ABC mode by using the QWERTY keyboard.

• Press the left soft key Abc to select a text entry option.

• Press to cycle between upper, lower case, or initial caps for characters
in ABC mode.

• Press the Spacebar ( ) to enter a space.

Entering Symbols

Symbol mode enables you to enter symbols such as @ or % into a text message.

1. In idle mode, press the left soft key Message, then press

1 () New Message, 1 () TXT Message to compose a new

text message.

HEL LO

Section 5: Entering Text 48

2.

Enter the phone number or email address of the recipient, then press the

down navigation key to move to the Text field.

3. Press the left soft key Abc to display a pop-up menu containing the

text entry mode options.

4. Abc is highlighted by default. Use the up/down navigation keys to highlight

Symbols, then press . The first of three screens containing symbols

appears in the display.

5. Press Prev or Next to page through the other symbols, if

necessary.

6. Enter the key that corresponds with the symbol that you wish to enter. For

example, press 4 ( ) for an exclamation point (!) on the first page of
symbols.

7. Repeat steps 3 through 6 to insert as many symbols into your message as

desired.

Entering Numbers

Enter numbers into a text message while in number mode (123). See "Changing the
Text Entry Mode" on page 44 for instructions on changing text entry modes.

1. In idle mode, press the left soft key Message, then

press 1 () New Message, 1 () TXT Message to compose a
new text message.

2. Enter the phone number or email address of the recipient, then press the

down navigation key to move to the Text field.

3. Press the left soft key Abc to display a pop-up menu containing the

text entry mode options.

4. Abc is highlighted by default. Use the up/down navigation keys to highlight

123, then press .

5. Enter the key that corresponds with the number that you wish to enter. For

example, press 4 ( ) for the number 4.

6. When you are finished adding numbers, press the left soft key 123 to

select a different method of text entry or press SEND to send your
message.

In Landscape mode

• For more detailed procedures, refer to "Entering Numbers - Landscape mode"
on page 128.

49

Section 6: Understanding Your Contacts

Topics Covered

• Opening Contacts Menu

• Contacts Icons

• Adding a Contact

• Adding Pauses

• Contact Groups

• Finding a Contact Entry

• Editing an Existing Contact Entry

• Deleting a Contact Entry

• Storing Numbers After a Call

• Speed Dialing

• My Name Card

• Finding My Phone Number

This section allows you to manage your daily contacts by storing their name and
number in your Address Book. Address Book entries can be sorted by name, entry,
or group.

Opening Contacts Menu

The Contacts menu provides access to powerful features such as adding Groups,
creating and sending V-cards, and viewing the phone number assigned to your
phone by Verizon Wireless.

1. In idle mode, press MENU, Contacts is highlighted, press .

• New Contact: Add a number, or e-mail address to your Contacts.

• Contact List: Find a phone number by Name.

• Groups: Add new or rename one of your five default groups.

• Speed Dials: Set a speed dial for a contact.

• My Name Card: Create a business card, which can then be sent to others as an
attachment

2. Use the navigation key to highlight the Contacts sub-menu of your

choice, then press .

Section 6: Understanding Your Contacts 50

Contacts Icons

You can assign multiple entries to a contact. The icons in the following table
represent all available entry types

Mobile 1 icon. Enter a mobile number for the entry in this field.

Home icon. Enter a home number for the entry in this field.

Work icon. Enter the work number for the entry in this field.

E-mail 1 icon. Enter an e-mail address for the entry in this field.

Group icon. Select an available group to associate with the entry in this
field.

Picture icon. Select an available pre-loaded image or downloaded image
from Picture ID to associate with the contact.

Ringtone icon. Select a ringtone to associate with the entry in this field.

Mobile 2 icon. Enter a secondary mobile number for the entry in this
field.

Fax icon. Enter a fax number for the entry in this field.

E-mail 2 icon. Enter a secondary e-mail address for the entry in this
field.

Notes icon. Enter a note for the entry in this field.

Adding a Contact

When you add information to your Contacts, you can add it as a new entry or as an
existing entry.

Method 1

Storing a number from idle mode

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 1 () New Contact to enter the contact information.

3. Enter a name for the entry using the keypad.

4. Use the navigation key to highlight the appropriate type (Mobile, Home,

Work, E-mail, etc.). Once highlighted, use the keypad to enter required

information.

51

Use the navigation key to highlight other type fields, if desired. Enter
information using the keypad.

5. To assign a Speed Dial location after entering the number, press the right

soft key Options. Highlight Set Speed Dial and press .

Highlight an unassigned location and press SET. A confirmation
message appears in the display, Yes is highlighted, press to add the
Contact to the speed dial location.

Note: Voicemail is assigned to Speed Dial location 1.

Note: You can assign a speed dial location to each number associated with the contact (Home, Work, Mobile

1, Mobile 2, and Fax.).

6. When you’re finished entering information for the entry, press SAVE to

save the entry to your Contacts.

Method 2

Storing a number from idle mode

You can add new numbers to the Contacts by simply entering the number while the
phone is in idle mode, then following the necessary prompts to complete the
process.

1. In idle mode, enter the number that you wish to save using the keypad,

then press the left soft key Save. You’re prompted to select from
Create New Contact or Update Existing.

2. Press 1( ) to enter the number as a Create New Contact, or

press 2 ( ) to add the number to Update Existing.

Note: Press 3 ( ) to save the entry to Notepad.

3. If you selected Create New Contact, the following types are available.

• Mobile 1

• Mobile 2

• Home

• Work

• Fax

4. If you selected Update Existing, proceed to Step 9.

5. Use the up/down navigation keys to highlight the desired entry type

(mobile, home, work, etc.) then press .

Section 6: Understanding Your Contacts 52

6.

Enter a name for the entry using the keypad. Press the left soft key
Abc if you wish to select a different method of text entry, such as Word,
Abc, ABC, 123, or Symbols.

7. To assign a Speed Dial location, use the up/down navigation key to

highlight the number you would like to assign to a Speed Dial location and
press the right soft key Options. Highlight Set Speed Dial and press

.

Highlight an unassigned location and press SET. A confirmation
message appears in the display, Ye s is highlighted, press to add
Contact to the speed dial location.

Note: Voicemail is assigned to Speed Dial location 1.

Note: You can assign a speed dial location to each number associated with the contact (Home, Work, Mobile

1, Mobile 2, and Fax.).

8. When you’re finished entering information for the entry, press SAVE.

The entry is saved to your Contacts.

9. If you selected Update Existing, the Contact List opens in Search mode.

Use the navigation key to browse through entries, or enter the name of the
entry using the keypad. Once you’ve highlighted the entry you wish to
update, press .

10. An UPDATE EXISTING pop-up screen with a selection list of entry types

displays. Use the up or down navigation keys to highlight the desired type
then press . The number is added to the selected entry and saved to
your Contacts.

Method 3

Storing Numbers After a Call

Once you’ve finished a call, you can store the number of the caller to your Contact
List.

Note: If the call was incoming and Caller ID information was unavailable, then the store option is also
unavailable.

1. After you press to end your call, the call time, length of call and

phone number appears in the display.

53

2.

Press the right soft key Save. You’re prompted to confirm this as a

Create New, or Update Existing.

3. Follow the on-screen prompts to designate other information.

Adding Pauses

Calls to automated systems often require a password or account number. Instead of
manually entering numbers each time, store the numbers to your Contacts along
with special characters called pauses.

1. In idle mode, enter the number.

2. Press Options use the navigation key to highlight Wait (A “W”

appears in the display.) or 2-sec Pause (A “P” appears in the display.) and
press .

• Wait: A hard pause stops the calling sequence until further input from you.

• 2-sec pause: A two-second pause stops the calling sequence for two seconds

and then automatically sends the remaining digits.

3. When you’re finished entering information for the entry, press SAVE.

4. Continue with Step 2, Method 2 of Adding a Contact.

Note: Entering multiple two-second pauses extends the length of a pause. For example, two consecutive

two-second pauses cause a total pause time of four seconds. Keep in mind pauses count as digits towards
the 48-digit maximum.

Contact Groups

You can place Contact entries into categories, called “Groups.” Groups allow you to
search your Contacts faster, quickly send messages to one or more group members,
and more.

Note: By default, new entries to your Contacts are placed into the No Group unless another group is
specified.

View Groups

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 3 () Groups. The following groups appear in the display.

• No Group

• Business

• Colleague

• Family

• Friends

Section 6: Understanding Your Contacts 54

3.

Use the navigation key to highlight the desired group, then press to
access the group and view its contents.

Move an Entry to Another Group

1. In idle mode, press the right soft key Contacts. Use the navigation

key to highlight the contact you wish to move.

2. Press the left soft key Edit. Use the up/down navigation key to scroll

to the Group option.

3. Press the left soft key Set. Choose from the following groups:

• No Group

• Business

• Colleague

• Family

• Friends

4. Use the navigation key to highlight the group containing the entry that you

wish to move, then press .

5. Press SAVE. The selection has been saved to the designated group.

Create a New Group

In addition to the five groups already in your phone, you can create additional groups
(a maximum of 25). New groups can be named anything you like as long as their
names are within the 32-character limit.

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 3 () Groups. Your existing groups appear in the display.

3. Press the left soft key New. A NEW GROUP pop-up menu displays

with the “Enter New Name” field highlighted.

4. Enter the Groups name.

5. Press SAVE to save. The Groups list now displays the new group

added.

Send a Text Message to Members of a Group

Use Send Message in the Group feature to send a message to as many as 10
members of a group at once.

Note: Text messaging availability varies when roaming off the Verizon Wireless Network.

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 3 () Groups. Your existing groups appear in the display.

55

3.

Highlight the desired group name and press the right soft key

Options. Highlight Send TXT Message and press .

4. Use the down navigation key to highlight the contacts in the group you want

to send a message. Press to place a checkmark next to each selection
to send messages to.

5. Press the left soft key Done after selecting up to 10 contacts.

Note: You can mark up to 10 members of a group for message distribution. If you try and mark an 11th
member, you’ll be notified that “MAXIMUM RECIPIENTS IS 10”.

6. Press the down navigation key to place the cursor in the Text field.

7. Enter the content of your message using the keypad.

8. To send the text message, press SEND.

Send a Picture Message to Members of a Group

Note: Only available within Verizon Wireless Enhanced Services Area.

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 3 () Groups. Your existing groups appear in the display.

3. Highlight the desired group name and press the right soft key

Options. Highlight Send Picture Message and press .

4. Use the down navigation key to highlight the contacts in the group to which

you want to send a message. Press to place a checkmark next to each
selection to send messages to.

5. Press the left soft key Done after selecting up to 10 contacts.

6. Press the down navigation key to move the cursor into the following entry

fields:

• Text: Add text to the Picture Message.

• Picture: Add an image from the My Pictures to the message.

• Sound: Add sound to the Picture Message.

• Subject: Add a subject to the Picture Message.

• Name Card: Attach a Name Card or an entry in your Contacts to the message.

7. Once you’ve finished adding the desired content to your Picture Message,

press SEND to send the Picture Message to the intended recipients.

Section 6: Understanding Your Contacts 56

Send a Video Message to Members of a Group

Note: Only available within Verizon Wireless Enhanced Services Area.

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 3 () Groups. Your existing groups appear in the display.

3. Highlight the desired group name and press the right soft key

Options. Highlight Send Video Message and press .

4. Use the down navigation key to highlight the contacts in the group to which

you want to send a message. Press to place a checkmark next to each
selection to send messages to.

5. Press the left soft key Done after selecting up to 10 contacts.

6. Press the down navigation key to move the cursor into the following entry

fields:

• Text: Add text to the Video Message.

• Video: Add an image from the My Video to the message.

• Subject: Add a subject to the Video Message.

• Name Card: Attach a Name Card or an entry in your Contacts to the message.

7. Once you’ve finished adding the desired content to your Video Message,

press SEND to send the Video Message to the intended recipients.

Finding a Contacts Entry

From idle mode, you can quickly open the Contacts list. Contacts is a quick way of
viewing entries you’ve stored in the Contacts list.

1. In idle mode, press the right soft key Contacts. The Contact List

displays.

2. In the Go To field, enter the first and second letters of the name you wish to

search until it is highlighted.

Editing an Existing Contact Entry

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 2 () Contact List.

3. Use the navigation key to highlight the contact list entry and press the left

soft key Edit.

4. Use the navigation key to highlight the name, number, e-mail address, or

other field that you wish to edit.

5. Press to backspace and delete numbers, text, or symbols.

57

6.

Press and hold to erase all numbers in the highlighted field.

7. Use the keypad to re-enter numbers, text, or symbols.

8. When you’re finished editing the entry, press SAVE. Your changes are

saved.

Deleting a Contact Entry

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 2 () Contact List.

3. Use the navigation key to display the contact list entry and press

VIEW.

4. Press the left soft key Erase.

5. A pop-up “ERASE ENTRY?” screen displays.

6. Highlight Yes or No, then press .

Storing Numbers After a Call

Once you’ve finished a call, you can store the number of the caller to your Contact
List.

Note: If the call was incoming and Caller ID information was unavailable, then the store option is also
unavailable.

1. After you press to end your call, the call time, length of call and

phone number appears in the display.

2. Press the right soft key Save. You’re prompted to confirm this as a

Create New, or Update Existing.

3. Follow the on-screen prompts to designate other information.

Store a number in idle mode

Store a phone number by entering the number in idle mode, then press

Save. Follow the screen prompts to assign number types and other

information.

Speed Dialing

Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers stored in your Contact List quicker.

Speed dialing allows you to press and hold a key (or keys) to dial the number
associated with those key(s). There are three types of speed dialing; 1-touch,
2-touch, and 3-touch dialing.

Section 6: Understanding Your Contacts 58

Note: Memory location 001 is reserved for voicemail.

1-touch dialing

Call phone numbers assigned to memory locations 002 - 009 by pressing and
holding the any of the 2 - 9 keys. For example, to speed dial the number assigned to
location 2, press and hold 2 ( ) until the name and number appear in the
display and the number is dialed.

2-touch dialing

Call phone numbers assigned to keys 010 through 099 by briefly pressing the first
key, then pressing and holding the second key. For example, to speed dial the
number assigned to 013, briefly press 1 ( ), then press and hold 3 ( )
until the number dials.

3-touch dialing

Call phone numbers assigned to memory locations 100 through 999 by briefly
pressing the first and second keys, then pressing and holding the third key. For
example, to dial location number 113, briefly press 1 ( ), 1 ( ), then
press and hold 3 ( ) until the number dials.

Assign a speed dial location

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 4 () Speed Dials. The Speed Dials screen displays with the

first available number highlighted.

3. Use the navigation keys to highlight the number you wish to assign or enter

the speed dial location using the keypad, press SET.

4. The SET SPEED DIAL screen displays.

5. Use the navigation keys to highlight the entry you want, then press .

6. At the pop-up screen, use the navigation key to highlight Yes or No and

press .

7. Continue to assign speed dial entries or press the key to return to

idle mode.

59

My Name Card

My Name Card allows you to create a virtual business card. Once completed, you
can send the card to recipients as a V-card attachment.

1. In idle mode, press MENU, Contacts is highlighted, press .

2. Press 5 () My Name Card.

3. My Name Card opens with the Name field highlighted.

4. Enter information in each of the fields as desired. Use the navigation key to

move between fields, then use the keypad to enter information.

5. When finished, press to save the Name Card.

Finding My Phone Number

My Number displays the ten-digit number assigned to your phone.

1. In idle mode, press MENU, then press the right navigation key to

Settings & Tools and press .

2. Press 9 () Phone Info.

3. Press 1 () My Number. The mobile device, phone number, and

mobile identification number are displayed.

Section 7: Messaging 60

Section 7: Messaging

Topics Covered

• Types of Messages

• Retrieving New Messages

• Creating and Sending Text Messages

• Creating and Sending Picture-Video Messages

• Creating and Sending Messages in Landscape Mode

• Receiving Picture-Video Messages

• New Sketch Messages

• Postcard

• Message Folders

• Changing Message Settings

• Wireless Sync Email

• Voicemail

• E-Mail

• Mobile IM

•Chat

This section allows you to send or receive different types of messages. It also
includes the features and functionality associated with messaging.

Types of Messages

Your phone is capable of sending email, text, picture, video, sketch, post cards and
voicemail messages. Send email, text, picture, and video messages by simply

entering the email address or the phone number of the recipient in the To: <.........>

or Send To field when creating a new message.

61

Retrieving New Messages

While text messages from other phones are delivered directly to your phone, Picture
and Video messages and emails will be stored in the Inbox of the message server
and the server will alert you to new messages. Therefore you need to retrieve new
messages to your phone and read them on the phone.

Retrieving a Text Message

When you receive a message in idle mode, the message ringer sounds, (unless
turned off), and New Text Message appears in the display along with the closed
envelope icon . The date and time of the message also appear in the display.

1. Press to View now, or press the down navigation key to highlight

View later and press . The message is saved to your inbox where you

can view it later.

2. With the message open, press the right soft key Options to Forward,

Reply w/copy, Save Quick Text, Lock, Add To Contacts or Message Info.
Press the left soft key Erase to erase the message.

3. With the message open, press REPLY to return a message to the

sender.

Note: When viewing a Text message, you can view the previous Text message by pressing the left
navigation key and view the next Text message by pressing the right navigation key.

Creating and Sending Text Messages

You can send text messages to another mobile phone or to an email address.

1. In idle mode, press the left soft key Message.

2. Press 1 () New Message.

3. Press 1 () TXT Message to compose a new text message.

4. Enter the phone number or email address of the recipient. At any point

while entering your recipient(s) phone number or email address, press the

123 or Add soft keys to display additional options.

• Press the left soft key 123 to change Text Entry Mode. Choose Word, Abc,

ABC, 123, Symbols and Shortcuts modes of text entry.

• Press the right soft key Add to add a recipient From Contacts, Groups, or

Recent Calls.

Note: If you do not select an option press the to return to your message.

Section 7: Messaging 62

5.

Press the down navigation key or key to move to the Text field. In the
text field, compose your message using the keypad. At any point while
composing a message, press the Abc or Options soft keys to
display additional options.

• Press the left soft key Abc to change Text Entry Mode. Choose

VoiceMode, Word, Abc, ABC,123, and Symbols modes of text entry.

• Press the right soft key Options to display a pop-up menu with the

options listed:

• Save As Draft: Save the message to your Draft folder.

• Add Graphic: Lists preloaded and downloaded graphics.

• Add Animation: Lists preloaded and downloaded animations.

• Add Sound: Lists preloaded and downloaded sounds.

• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10

additional messages by pressing the right soft key New and erase
messages by pressing the left soft key Erase.

• Add Name Card: Attach My Name Card information or information from one of
your Contacts.

• Edit Text Format: Allows you to edit the text size, alignment, style, color, and
background color.

• Priority Level: Save the message with a High or Normal priority.

• Callback #: Provides the ability to send a callback # with the message.

• Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has been
received.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

Note: If you do not select an option press the to return to your message.

6. Use the navigation key to highlight an option. Press to perform the

function for the option, or to enter its sub-menu.

7. To send the message, press SEND.

63

Creating and Sending Picture-Video Messages

Note: Only available within Verizon Wireless Enhanced Services Area.

Picture-Video Message combines text, picture, video and sound creating an
message intuitive message You can add sounds and attach a Name Card or Contact
entry to your Picture-Video Message. This is also known as Multimedia Messaging
(MMS).

1. In idle mode, press the left soft key Message.

2. Press 1 () New Message.

3. Press 2 () Picture Message or 3 () Video Message to

compose a new message.

4. Enter the phone number or email address of the recipient. At any point

while entering your recipient(s) phone number or email address, press the

123 or Add soft keys to display additional options.

• Press the left soft key 123 to change Text Entry Mode. Choose Word,

Abc, ABC, 123, Symbols and Shortcuts modes of text entry.

• Press the right soft key Add to add a recipient From Contacts, Groups,

Recent Calls, or To PIX Place.

Note: If you do not select an option press the to return to your message.

5. Press the down navigation key or key to move to the Tex t field. In the

text field, compose your message using the keypad. At any point while
composing a message, press the Abc or Options soft keys to
display additional options.

• Press the left soft key Abc to change Text Entry Mode. Choose

VoiceMode, Word, Abc, ABC,123, and Symbols modes of text entry.

• Press the right soft key Options to display a pop-up menu with the

options listed:

• Preview: Shows the message before it is sent.

• Save As Draft: Save the message to your Draft folder.

• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10

additional messages by pressing the right soft key New and erase
messages by pressing the left soft key Erase.

• Priority Level: Save the message with a High or Normal priority.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

Section 7: Messaging 64

Note: If you do not select an option press the to return to your message.

6. Press the down navigation key to highlight the Picture-Video field. Press

the left soft key My Pic-My Video to add a Picture/Video, and follow
the prompts. Press to attach the highlighted object.

7. If creating a Picture message, press the up/down navigation key to

highlight the Sound field. Press the left soft key

Sounds to select a

sound.

Press the up/down navigation key to highlight the desired sound or

highlight Record New to record a sound and press .

8. Press the down navigation key to highlight the Subject field. Press the left

soft key Abc to change entry mode. Press the right soft key

Options to Add Quick Text. Press the up/down navigation key to

highlight the desired Quick Text phrase, and press .

9. Press the down navigation key to add Name Card. Press the left soft key

Add to select My Name Card or an entry from your Contacts list.

Follow the prompts and press to insert.

10. Once all fields are complete, press to send the message to the

intended recipient(s).

Creating and Sending Messages in Landscape Mode

• For more detailed procedures, refer to "Creating and Sending Messages ­Landscape Mode" on page 127.

Receiving Picture-Video Messages

When you receive a new Picture-Video Message, NEW PIC-VIDEO MSG appears in
the display along with the options View Now, or View Later.

Note: For the option Reject to appear in the display when you receive a Picture-Video Message, Auto
Receive mode must be set to Off in the Message Settings menu.

1. When you receive a new Picture-Video Message, press View Now.

Loading... appears in the display.

2. After loading, the image (and text if any) contained in the

Picture-Video Message appear in the display.

3. Use the navigation keys to scroll through the message or view the entire

picture if necessary.

65

4.

Press the Mute/Unmute/Play (to play the attached sound byte or

video) or Options soft keys to display the following options:

• Play Again: Replays the sound in the message.

• Forward: Forward the message to another recipient.

• Erase: Deletes the message.

• Save Picture: Saves the picture in a Picture-Video message to My Picture

• Save Sound: Saves the sound received with the message.

• Save As Ringtone: Saves the sound as a ringtone.

• Save Quick Text: Saves the text received in the message to the Quick Text list.

• Lock/Unlock: Locks the message to prevent deletion.

• Add To Contacts: Save the number of the sender to your Contacts as a new entry
or add to an existing entry.

• Message Info: Provides the following information: From and Callback Number,
Priority, Message Type, Size and if a Graphic, Sound or Name Card were included
in the message.

Note: When viewing a Picture-Video message, you can view the previous Picture-Video message by
pressing the left navigation key and view the next Picture-Video message by pressing the right navigation
key.

Receive Messages While in a Call

1. When you receive a message while in a call, the NEW TXT MESSAGE or

NEW PIC-VIDEO MESSAGE(S) dialog box appears in the display.

Note: Text messages can only be viewed during a call. Picture-Video messages can not be downloaded

during a call.

2. You can view the message without disconnecting your call by pressing

Options and then select Messaging.

3. Press 2 () Inbox, use the up/down navigation keys to highlight the

message you want to view and press OPEN to view the message.

View a Picture-Video Message Later

1. When you receive a new Picture-Video message that you would like to view

later, highlight View Later and press .

2. To view the message, press the left soft key Message, 2

(

)

Inbox

.

3. Use the navigation key to highlight the unopened message, then press

OPEN. The INBOX screen appears first with information about the message.
Press DOWNLOAD to view Picture-Video message.

Section 7: Messaging 66

New Sketch Messages

You can convert a picture to a black and white sketch drawing that can be sent with
a message. For information on taking a picture see "Take Pictures" on page 108. For
information on sending the message, see "Receiving Picture-Video Messages" on
page 64.

Postcard Message

Allows you send pictures saved in your phone or take new pictures with your camera
and send as a postcard. A postcard message merges handwritten notes with
pictures you have taken with your phone. Please note that downloaded photos that
have DRM protection can not be used with this feature.

Creating and Sending a Postcard

1. In idle mode, press the left soft key Message.

2. Press 1 () New Message.

3. Press 5 () Postcard Message to compose a new message.

MY PICTURES appear in the display.

4. Use the navigation key to select a photo and press . The camera is

activated.

5. Press TAKE to capture an image of your handwritten note. A merged

picture of your note and picture will be Shown.

6. Press the right soft key Options to customize the image. The

following options appear in the display:

• Ink Color: Allows you to choose the outline color of the image.

• Shadow: Allows you to turn shadow On or Off.

• Rotate: Allows you to rotate the image. Press the right or left navigation to rotate
the image.

• Zoom: Allows you adjust the zoom on the image. Press the left or right navigation
key to adjust the zoom.

• Move: Allows you to move the image. Press the navigation key to move the
image.

Press the left soft key Erase to erase the image and return to camera

mode.

7. Press SEND.

8. Enter the phone number or email address of the recipient. At any point

while entering your recipient(s) phone number or email address, press the

123 or Add soft keys to display additional options.

67

• Press the left soft key 123 to change Text Entry Mode. Choose Word,

Abc, ABC, 123, Symbols and Shortcuts modes of text entry.

• Press the right soft key Add to add a recipient From Contacts, Groups,

Recent Calls, or To PIX Place.

Note: If you do not select an option press the to return to your message.

9. Press the down navigation key or key to move to the Tex t field. In the

text field, compose your message using the keypad. At any point while
composing a message, press the Abc or Options soft keys to
display additional options.

• Press the left soft key Abc to change Text Entry Mode. Choose

VoiceMode, Word, Abc, ABC,123, and Symbols modes of text entry.

• Press the right soft key Options to display a pop-up menu with the

options listed:

• Preview: Shows the message before it is sent.

• Save As Draft: Save the message to your Draft folder.

• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key

New and erase

messages by pressing the left soft key Erase.

• Priority Level: Save the message with a High or Normal priority.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

Note: If you do not select an option press the to return to your message.

10. Press the down navigation key to highlight the Picture field. Press the left

soft key My Pic to change picture.

11. Press the down navigation key to highlight the Sound field. Press the left

soft key Sounds to select a sound.

Press the up/down navigation key to highlight the desired sound or

highlight Record New to record a sound and press .

12. Press the down navigation key to highlight the Subject field. Press the left

soft key Abc to change entry mode. Press the right soft key

Options to Add Quick Text. Press the up/down navigation key to

highlight the desired Quick Text phrase, and press .

13. Press the down navigation key to add Name Card. Press the left soft key

Add to select My Name Card or an entry from your Contacts list.

Follow the prompts and press to insert.

Section 7: Messaging 68

14.

Once all fields are complete, press SEND to send the message to the

intended recipient(s).

Message Folders

Your phone provides default message folders for your Text and Picture-Video
messages.

Note: To quickly view all messages in the Inbox, Sent, or Drafts folders, open one message and then press
the right navigation key to view the next message or press the left navigation key to view the previous
message.

Inbox

Received messages of all types are stored in the Inbox folder.

1. In idle mode, press the left soft key Message.

2. Press 2 () Inbox.

3. Use the navigation key to highlight the message that you wish to view.

4. Press OPEN to view contents of the highlighted message.

5. While viewing a message press the right soft key Options to display

the options listed.

• Play Again: Replays a Picture-Video message.

• Forward: Forward the message to another recipient.

• Erase: Deletes the message. Only displays in menu when a sound byte isn’t
attached to the message that was sent.

• Save Picture: Saves the picture-video sent in a Picture-Video message to My
Pictures or My Video.

• Save Sound: Saves the sound byte received with the message in My Sounds.

• Save As Ringtone: Saves the sound byte received with the message a ringtone.

• Save Quick Text: Saves the text received in the message to the Quick Text list.

• Save Name Card: Saves the name card received in the message.

• Lock/Unlock: Secures/Unsecures the message to prevent deletion.

• Add To Contacts: Save the number of the sender to your Contacts as a new entry
or add to an existing entry.

• Message Info: Provides the following information: From (also provides the date
and time the message was sent), Callback Number, Priority, Message Type, Size
and if a Picture, Sound or Name Card were included in the message.

Note: If no sound byte or video is attached to the message, press the left soft key Erase to delete the
message or press the left soft key Mute/Unmute/Play to play or mute/unmute the sound byte
attached to the message.

69

6.

Press REPLY to return a message to the sender.

Note: When Auto Erase is turned on, the oldest read Text message is replaced by an incoming Text message

when 50 Text messages are stored in the Inbox, and the oldest read Picture-Video message is replaced by
an incoming Picture-Video message when 80 Picture-Video messages are stored in the Inbox. See
‘Changing Message Settings” on page 73 for information on how to set Auto Erase and Auto Receive.

Sent

Your phone stores messages in the Sent folder, regardless of whether the message
was successfully transmitted. Verify if and when a message or e-mail was
successfully transmitted by enabling the Enh. Delivery Ack feature in Message
Settings.

Note: Enh. Delivery Ack can't be set for Picture-Video message.

Review Messages in the Sent Folder

1. In idle mode, press the left soft key Message.

2. Press 3 () Sent.

3. Use the navigation key to highlight the message you wish to review, then

press OPEN.

4. While viewing the message, press the right soft key Options to

display options listed:

• Play Again: Replays a Picture-Video message.

• Forward: Forwards the message to another recipient.

• Erase: Deletes the message. Only displays in menu when a sound byte isn’t
attached to the message that was sent.

• Lock/Unlock: Locks the message to prevent deletion.

• Save Quick Text: Saves the text sent in the message to the Quick Text list.

• Add To Contacts: Adds the sender’s information to your contact list.

• Message Info: Provides the following information: Send To Number (also provides
the date and time the message was sent), Priority, Message Type, Size,
Attachments (if a Graphic, Sound or Name Card were included in the message),
Status, and Error Code.

Note: If no sound byte or video is attached to the message, press the left soft key Erase to delete the
message or press the left soft key Mute/Unmute/Play to play or mute/unmute the sound byte
attached to the message.

5. Use the navigation key to highlight the desired option.

6. Press to perform the function for the highlighted option.

Section 7: Messaging 70

7.

Press RESEND to send the message to the recipeint again.

8. From the Sent menu, press the left soft key Erase to delete the

message from the Sent folder. Highlight Yes to delete, or No to return to the
Sent menu.

Drafts

Draft messages are those that have been composed but never sent. You can return
to the Drafts folder at any time to view, edit, or send a draft message.

Create a Draft Text Message

1. In idle mode, press the left soft key Message.

2. Press 1 () New Message.

3. Select the type of message you want to create.

4. Enter the phone number of the recipient, then press the down navigation

key.

5. Compose your message using the keypad, then press the right soft key

Options. A pop-up menu appears in the display.

6. Scroll down with the navigation key until Save As Draft is highlighted, then

press . A confirmation message appears in the display and your
message is saved to the Drafts folder.

View and Edit Draft Messages

1. In idle mode, press the left soft key Message.

2. Press 4 () Drafts.

3. Use the navigation key to highlight the message you wish to view, then

press EDIT. The message opens in the Tex t field with the message
text displayed.

4. Press to backspace and delete any characters in the display, if

desired. Press and hold to erase all characters in the field.

5. Press the right soft key Options. A pop-up menu appears in the

display with the options listed.

• For Text Messages the following options appear in the display:

• Save As Draft: Save the message to your Draft folder.

• Add Graphic: Lists preloaded and downloaded graphics.

• Add Animation: Lists preloaded and downloaded animations.

• Add Sound: Lists preloaded and downloaded sounds.

• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10

additional messages by pressing the right soft key New and erase
messages by pressing the left soft key Erase.

71

• Add Name Card: Attach My Name Card information or information from one of
your Contacts.

• Edit Text Format: Allows you to edit the text size, alignment, style, color, and
background color.

• Priority Level: Save the message with a High or Normal priority.

• Callback #: Provides the ability to send a callback # with the message.

• Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has been
received.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

• For Picture-Video Messages the following options appear in the display:

• Preview: Allows you to preview the message.

• Save As Draft: Save the message to your Draft folder.

• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key

New and erase

messages by pressing the left soft key Erase.

• Priority Level: Save the message with a High or Normal priority.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

6. Use the navigation key to highlight the desired option. Press to perform

the function for the highlighted option.

7. Press the down navigation key to highlight the following fields for Picture-

Video Messages and press the right soft key Options to display the
following options:

• Picture-Video: Insert a picture-video clip.

Note: Press the left soft key My Pic-My Video to add a new picture or video clip.

• Preview: Allows you to preview the message.

• Save As Draft: Save the message to your Draft folder.

• Priority Level: Save the message with a High or Normal priority.

• Remove Picture-Video: Deletes the attached Picture-Video file.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

• Sound: Insert a sound byte.

Note: Press the left soft key Sounds to add a new sound byte.

• Preview: Allows you to preview the message.

• Save As Draft: Save the message to your Draft folder.

• Priority Level: Save the message with a High or Normal priority.

Section 7: Messaging 72

• Remove Sound: Deletes the attached sound byte file.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

• Subject: Insert the subject of your message.

Note: Press the left soft key Abc to change text entry mode.

• Preview: Allows you to preview the message.

• Save As Draft: Save the message to your Draft folder.

• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key

New and erase

messages by pressing the left soft key Erase.

• Priority Level: Save the message with a High or Normal priority.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

• Name Card: Insert and name card.

Note: Press the left soft key Add to add a name card.

• Preview: Allows you to preview the message.

• Save As Draft: Save the message to your Draft folder.

• Priority Level: Save the message with a High or Normal priority.

• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.

8. Use the navigation key to highlight the desired option. Press to

perform the function for the highlighted option.

9. Once you’ve returned to the message composer, press to send the

message, if desired.

Erase Options

You can erase unlocked messages in your Inbox, Drafts folder, or Sent folder.
Locked messages are not erased.

To erase messages:

1. In idle mode, press the left soft key, Message.

2. Press the right soft key Options.

3. The following options are available:

• Erase Inbox: Erases unlocked messages in your Inbox.

• Erase Sent: Erases unlocked messages in your Sent folder.

• Erase Drafts: Erases unlocked messages in your Drafts folder.

73

• Erase All: Erases unlocked messages in all message folders
(Inbox, Drafts and Sent).

Changing Message Settings

This menu allows you to define settings for messages sent or received on your
phone. To access your message settings, use the following steps:

1. In idle mode, press the left soft key, Message.

2. Press the left soft key Settings.

3. Select the message type you would like to change and press . Choose

from the following options:

• All Messages: Allows you make a broadcast change to all message settings.

• Auto Save: Saves all messages sent. Use the navigation keys to select On, Off, or
Prompt.

• Auto Erase: Erases the oldest message of the same type (Text or Picture-Video)
when the maximum number of received messages of that type is exceeded in the
Inbox. For example, the oldest read Text message is replaced by an incoming Text
message when 50 Text messages are stored in the Inbox, and the oldest read
Picture-Video message is replaced by an incoming Picture-Video message when
80 Picture-Video messages are stored in the Inbox. Choose from On or Off.

• Quick Text: Displays the Quick Text pre-defined entries for Text Message and
Picture-Video Message. Press the right soft key New to add to the Quick
Text list. Enter your new text and press . The new Quick Text item shows in
the first position of the list.

• Voice Mail #: Enter the speed dial entry set for your voicemail.

• Entry Mode: Sets the default entry mode for messaging. Choose from Word, Abc,
ABC, or 123.

• Callback #: Displays the callback number in the text message. Choose from On or
Off.

• Signature: Adds the signature text to each message sent. Choose from None or
Custom.

• TXT Message: Allows you to customize Text Message settings.

• Auto View: Automatically displays the text message when received. Choose from
On or Off.

• Block / Unblock: Allows the user to block/unblock message received from a
specific phone number. Choose from Set Block, Set Unblock, and View Blocked
List.

• Signature: Adds the signature text to each message sent. Choose from None or
Custom.

Section 7: Messaging 74

• Picture-Video Message: Allows you to customize Picture-Video Message

settings.

• Auto Receive: Automatically receives messages into your Inbox. Choose from On
or Off.

• Signature: Adds the signature text to each message sent. Choose from None or
Custom.

Wireless Sync Email

Wireless Sync from Verizon Wireless provides wireless synchronization of email,
calendar and contact information with your mobile device. Wireless Sync can
synchronize your business email, personal email or both. Wireless Sync supports
Microsoft Exchange, Lotus Domino, POP3 and IMAP email systems. Visit
www.wsync.com for more information on options for configuring Wireless Sync and
to create your account.

*Airtime is required for use.

• For more detailed procedures, refer to "Wireless Sync Email - Landscape
Mode" on page 128.

Voicemail

New voicemail alerts are sent via Text message. These message indicate how many
new and urgent voicemails are in your box. Open the text message to view the
number of new and urgent voice messages in your voice mailbox. If a caller leaves a
callback number, this number will also be sent via Text message.

Receive Voicemail Messages

When you receive a new voicemail message you’ll hear a sound and an Text
message appears in the display.

1. Press the up/down navigation keys to select Listen Now or Listen Later.

2. Press .

View Voicemail Messages in the Inbox Folder

1. In idle mode, press the left soft key, Message.

2. Press 6 () Voicemail.

3. Press CALL to dial voicemail and retrieve your message(s).

E-Mail

• For more detailed procedures, refer to "E-Mail - Landscape Mode" on page

129.

75

Mobile IM

• For more detailed procedures, refer to "Mobile IM - Landscape Mode" on page

130.

Chat

• For more detailed procedures, refer to "Chat - Landscape Mode" on page 130.

Section 8: Changing Your Settings 76

Section 8: Changing Your Settings

Topics Covered

• My Account

• Tools

• Bluetooth Menu

• Sounds Settings

• Display Settings

• Phone Settings

• Call Settings

•Memory

• Phone Info

This section explains the sound and phone settings for your phone. It includes
display settings, security settings, and extra settings associated with your phone.

My Account

The My Account menu connects to the Verizon Wireless Mobile Web. You can setup
Favorites or choose from the available applications.

• For more detailed procedures, refer to "My Account - Landscape Mode" on
page 131.

Tools

The Tools menu provides the ability to access the following menus:

• Voice Commands: For more information see, "VoiceSignal™" on page 30.

• Calculator: For more information see, "Calculator" on page 114.

• Calendar: For more information see, "Calendar" on page 116.

• Alarm Clock: For more information see, "Alarm Clock" on page 118.

• World Clock: For more information see, "World Clock" on page 119.

• Stop Watch: For more information see, "Stop Watch" on page 120.

• Notepad: For more information see, "Notepad" on page 120.

77

Bluetooth Menu

About Bluetooth

Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.

Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.

Note: When connected to your Bluetooth headset, press the headset send key to use VoiceSignal’s Voice
Dial feature.

Bluetooth Service Profiles

Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
will not work together.

Your phone supports the following profile service:

• HSP: Headset profile

The HSP describes how a Bluetooth enabled headset should communicate
with a computer or other Bluetooth enabled device such as a mobile
phone. When connected and configured, the headset can act as the
remote device’s audio input and output interface.

• HFP: Hands-free profile*

HFP describes how a gateway device can be used to place and receive
calls for a hand-free device. A typical configuration is an automobile using
a mobile phone for a gateway device. In the car, the stereo is used for the
phone audio and a microphone is installed in the car for sending outgoing
audio of the conversation. HFP is also used for a personal computer to act
as a speakerphone for a mobile phone in a home or office environment.

• SPP: Serial Port profile

SPP defines how to set-up virtual serial ports and connect two Bluetooth
enabled devices.

Section 8: Changing Your Settings 78

• DUN: Dial Up Networking

DUN provides a standard to access the Internet and other dial-up services
over Bluetooth wireless technology. The most common scenario is
accessing the Internet from a laptop by dialing up on a mobile phone,
wirelessly.

• OPP: Object Push Profile (vCard only)

* For vehicle/accessory compatibility, go to www.verizonwireless.com/bluetooth chart. Phone does not
support all Bluetooth OBEX profiles.

The following Bluetooth options are available:

On/Off

When the Bluetooth radio is turned on, you can use the Bluetooth features available.
When the Bluetooth radio is turned off, you cannot send or receive information via
Bluetooth. To save battery life or in situations where radio use is prohibited, such as
airline traveling, you can turn off the Bluetooth wireless technology.

1. In idle mode, press MENU key and use the right navigation key to

highlight Settings & Tools and press .

2. Press 3 () Bluetooth Menu. The Bluetooth menus are listed in the

display.

3. Press the left soft key to turn Bluetooth On or Off.

Note: If Bluetooth is turned on, the Bluetooth icon displays in the top line of the display.

Search

This option searches for a recognized Bluetooth wireless technology device.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 3 () Bluetooth Menu. The Bluetooth menus are listed in the

display.

3. Add New Device is highlighted, press twice.

Note: If you have NOT already activated Bluetooth on the phone, the message “TURN BLUETOOTH ON?”

displays. Highlight Yes to activate or No to exit and press .

4. A list of found Bluetooth devices will be displayed. Use the Up and Down

navigation keys to highlight a Bluetooth device. Press to pair the
devices.

79

5.

Enter the passkey (0000 for most devices) and press to pair with the

device you selected.

6. Select Yes to pair the devices. Once connected the Bluetooth Connected

icon appears in the upper half of the display.

Bluetooth Settings

The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 3 () Bluetooth Menu. The Bluetooth menus are listed in the

display.

3. Press the right soft key Settings. The Bluetooth menu displays with

the following options:

• My Phone Name: allows you enter a customized name.

• Discovery Mode: allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.

Note: After selecting On, users have one minute to see your accessibilty. After which Discovery Mode will
automatically default back to off.

• My Phone Info: shows the handset information.

Sounds Settings

The Sounds menu provides the ability to access the following menus:

Master Volume

1. Locate the volume keys located on the left side of the phone.

2. Use these keys to adjust the volume (High, Medium High, Medium, Medium

Low, Low, Vibrate Only, Alrm Only, All Sounds Off.)

3. Press the Play soft key to hear a sample audio file played at the

currently selected Master Volume level.

4. Press SET to save the new volume setting.

Section 8: Changing Your Settings 80

Call Sounds

Ringer Settings

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 4 () Sounds Settings. The Sounds Settings menus are listed

in the display.

3. Press 2 ()

Call Sounds.

4. Press 1 () Call Ringtone.

• Call Ringtone: Get new ringtones from “Get It Now” (Get New App.) or choose

from pre-loaded ringtones. Get New Ringtones, can only be accessed in
Landscape Mode.

- or -

Press 2 () Call Vibrate to turn Call Vibrate On or Off.

5. Press to save the setting.

Alert Sounds

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 4 () Sounds Settings. The Sounds Settings menus are listed

in the display.

3. Press 3 ()

Alert Sounds. For the following options, you can set the

tone for the message alerts. You can also set vibration on and set a
reminder.

• TXT Message: allow you to set a notification for TXT message.

• Picture-Video Message: allow you to set a notification for Pic-Video message.

• Voicemail: allow you to set a notification for Voicemail Message.

• Device Connect: allow you to set a notification when you connect to a device.

Dial Sounds

Select the sound of the keypad when pressed.

1. In idle mode, press MENU, use the navigation key to highlight

Settings & Tools and press .

2. Press 4 () Sounds Settings. The Sounds Settings menus are listed

in the display.

3. Press 4 ()

Dial Sounds.

4. Use the navigation key to to select Default or Xylophone.

5. Press to set the new dial sound.

81

Keypad Volume

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 4 () Sounds Settings. The Sounds Settings menus are listed

in the display.

3. Press 5 ()

Keypad Volume.

4. Use the navigation key or volume key to adjust the keypad volume.

5. Press SET to save.

Earpiece Volume

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 4 () Sounds Settings. The Sounds Settings menus are listed

in the display.

3. Press 6 ()

Earpiece Volume.

4. Use the Up and Down navigation keys to adjust the keypad volume.

5. Press SET to save.

Service Alerts

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 4 () Sounds Settings. The Sounds Settings menus are listed

in the display.

3. Press 7 ()

Service Alerts. For the following options, you can turn

the Service Alert On or Off.

• ERI: Sounds an alert when you go into and out of your coverage areas.

• Minute Beep: While on a call your phone beeps after every minute of usage.

• Call Connect: Sounds an alert when a call is connected and when a call has
ended.

Power On/Off

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 4 () Sounds Settings. The Sounds Settings menus are listed

in the display.

3. Press 8 ()

Power On/Off. You can set the sounds for Power On and

Power Off to either On or Off.

Section 8: Changing Your Settings 82

Display Settings

The Display menu affects the menu style, idle mode animation, backlight settings,
and more.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display.

• Banner: Create your own personalized greeting that appears in the display when
your phone is in idle mode or choose the ERI Banner which displays the network in
which you have subscribed.

• Backlight: Choose settings for the LCD and/or Keypad.

• Contrast: Choose contrast settings for the Front Display.

• Wallpaper: Choose Pictures from My Pictures or Videos from My Videos to use as
the background display for your Main Screen. Choose Pictures from My Pictures
to use as the background display for your Front Screen.

• Display Themes: Choose from 5 preset colors used for menu display.

• Dial Fonts: Choose a dialing font style and size.

• Clock Format: Choose digital or analog format for time display.

3. Use the navigation key to highlight the display menu that you wish to edit,

then press .

4. Use the navigation key to select an option and press .

Banner

Banner allows you to create your own personalized greeting that appears in the
display while your phone is in idle mode. Or you can display the network to which
you are subscribed.

To create a personal banner:

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display. Press 1 () Banner.

3. Press 1 () Personal to create a customized banner for your

handset.

Note: Press and hold to erase an existing banner, if necessary.

83

4.

Enter a word or short phrase (18 characters or less) to appear in your
phone’s display when the phone is in idle mode and press to save the
new banner.

To turn on an ERI banner:

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display. Press 1 () Banner.

3. Press 2 ( ) to set the ERI Banner for your handset.

4. Select On or Off and press .

Backlight

Set the backlight for the display or keypad to remain on for a specified period of
time or to remain on as long as the flip is open.

Note: Prolonged backlight use drains your battery faster.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display.

3. Press 2 () Backlight. The menus listed appear in the display.

• Display: The following options are for the Main LCD.

• Duration: Can be set to 7 seconds, 15 seconds, 30 seconds, Always On, or
Always Off.

• Brightness: Use the navigation key or volume key to adjust the brightness.

• Keypad: The following options are for the keypad.

• 7 Seconds: The keypad is on for 7 seconds.

• 15 Seconds: The keypad is on for 15 seconds.

• 30 Seconds: The keypad is on for 30 seconds.

• Always On: The keypad is always on.

• Always Off: The keypad is always off.

4. Use the navigation key to highlight a menu.

5. Press to enter the highlighted option’s menu and change settings as

desired.

Section 8: Changing Your Settings 84

Contrast

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display.

3. Press 3 () Contrast.

4. Press the left navigation key for a darker setting or press the right navigtion

key for a lighter setting.

5. Press .

Wallpaper

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display.

3. Press 4 () Wallpaper.

4. Press 1 () Main Screen or 2 () Front Screen.

• Main Screen: Choose My Picture (allows you to select an image from the
My Picture folder.) or My Video (allows you to select a video from the My Video
folder.)

• Front Screen: Choose My Pictures (allows you to select an image from the My
Picture folder.)

5. Use the navigation key to highlight your selection, the press to select

the wallpaper that will appear in the main or front LCD display while your
phone is in idle mode.

Display Themes

Choose from 5 preset themes used for the menu display.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display.

3. Press 5 () Display Themes.

4. Use the navigation key to select an option and press .

85

Dial Fonts

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display.

3. Press 6 () Dial Fonts. Press 1 () Style or 2 () Size

and press .

• Style: Choose Normal, Rainbow, Quill Pen, or Sticky.

• Size: Choose Normal or Large

4. Use the navigation keys to select a dialing font preference, then press .

Clock Format

This menu allows you to have time displayed in digital or analog format.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 5 () Display Settings. The Display Settings menus are listed

in the display.

3. Press 7 () Clock Format. The Clock Format menus are listed in the

display.

4. Press 1 () Main Clock or 2 () Front Clock.

5. The following options appear in the display. Highlight one of the following

options and press to save.

• Digital: Time appears in digital format, for example, 12:54pm.

• Analog: Time appears in clock format. Digital format is still present in the display.

• Off: No time is displayed.

Phone Settings

The Phone Settings menu provides the ability to access the following menus:

Standalone Mode

With Standalone Mode on, all RF functions for your phone are disabled, and you
cannot use your phone to place or receive calls.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 1 () Standalone Mode. Use the navigation key to select On or

Off and press .

Section 8: Changing Your Settings 86

Set Shortcut Key

Shortcut Key allows you to select from up to 23 applications that appear in the
display when you press the left/right/up/down directional keys on the navigation key
in idle mode.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 2 () Set Shortcut Key.

4. Use the navigation key to select the directional key you want to change and

press .

Note: Press 5 ( ) Reset All to return to the navigation key defaults settings. For default settings see
"Navigation Key Shortcuts" on page 39

5. Select a menu item and press .

Flip Duration

Flip Duration settings allows you to change the time interval for the Portrait to
Landscape mode. For example, when composing a message in Portrait mode, and
you want to change to Landscape mode, you can retain the previously entered text
depending on the setting selected, (3 or 6 seconds) by closing the handset and
reopening to Landscape mode.

Note: If not re-opened the message will be automatically saved to the draft folder.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 3 () Flip Duration.

4. Use the navigation key to select 3 Seconds or 6 Seconds and press .

87

Language

Change the display language from English to Spanish or vice versa using the

Language menu.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 4 () Language.

4. Use the navigation key to select a language and press .

Location

Note: This feature is only available on the Verizon Wireless network.

The Location (GPS) setting identifies your location to the network. You can fully
enable this setting or set GPS to work only in the case that you dial 911 from your
phone.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 5 () Location. The following options appear in the display:

• Location On: GPS location setting is on wherever the feature is available.

• E911 Only: GPS location setting is on whenever you dial 911 only.

4. Use the navigation key to highlight an option.

5. Press to select the highlighted setting.

Security

The Security menu allows you to lock your phone, set restrictions, and other
security options.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings.

3. Press 6 () Security.

Section 8: Changing Your Settings 88

4.

Enter the lock code (factory settings are the last four digits of your

telephone number). The following options appear in the display:

• Lock Mode: Allows you to lock the Device or Location.

• Edit Code: Allows you to change the Lock Code for the Device or Location.

• Reset Settings: All settings (except Contacts) are reset to factory default settings.

Lock Phone

Lock Phone restricts the use of your phone with the exception of outgoing calls to

911. Lock Phone allows you to answer calls, but to place calls (except to emergency
numbers) you have to unlock the phone.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 6 () Security.

You’re prompted to enter the lock code. The

default lock code is the last four digits of your telephone number.

4. Enter the Lock Code. Several security menus appear in the display.

5. Press 1 () Lock Mode. Use the navigation key to highlight Device.

Press . The following options display:

• Lock: Your phone returns to idle mode. The the Lock Code is required immediately
to access any functions.

• Unlock: If locked, unlocks the device or phone, depending on your selection.

• On Power Up: The Lock Code is required whenever you power up the phone.

6. Use the navigation key to select an option and press .

Lock Location

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 6 () Security.

You’re prompted to enter the lock code. The

default lock code is the last four digits of your telephone number.

4. Enter the Lock Code. Several security menus appear in the display.

5. Press 1 () Lock Mode. Use the navigation key to highlight

Location. Press . The following options display:

• Lock: Your phone returns to idle mode. The the Lock Code is required immediately
to access any functions.

• Unlock: If locked, unlocks the device or phone, depending on your selection.

6. Use the navigation key to select an option and press .

89

Edit Lock Code

The default lock code is the last four digits of your phone number. Edit Code allows
you to change this code to a lock code of your preference.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 6 ()

Security.

You’re prompted to enter the lock code. The

default lock code is the last four digits of your telephone number.

4. Press 2 () Edit Code.

5. At the “ENTER NEW LOCK CODE” prompt, enter the new lock code.

6. You’re prompted to confirm the new lock code.

7. At the “CONFIRM LOCK CODE” prompt, re-enter lock code.

8. “DEVICE CODE SET” message appears in the display confirming that your

lock code has been changed.

Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.

Resetting Your Phone

Reset Settings returns all setup options to their factory default.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 6 () Security, and enter the lock code.

4. Press 3 () Reset Settings. A prompt appears in the display asking if

you wish to restore default settings (except for the Contacts).

5. Press Yes to restore default settings or press No to return to the Security

list.

Section 8: Changing Your Settings 90

Call Emergency Numbers in Lock Mode

In Lock Mode, you can dial 911 to place an emergency call.

Note: If you dial 911, your phone dials the emergency number immediately (no prompt).

System Select

The System Select menu allows you to set your roaming options. For information on
roaming options, see "Roaming Options" on page 29.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 7 () System Select. The following options appear in the

display:

• Home Only

• Automatic

4. Make your selection and press .

NAM Selection

Your phone provides the option of selecting between two NAMs (Number Assignment
Modules) or phone numbers. Select either NAM1 or NAM2.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 8 () NAM Selection. The following options appear in the

display:

• NAM1

• NAM2

4. Make your selection and press .

Quick Search

Quick Search is an easy way to locate contacts in your Address Book and Menu
items.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

91

2.

Press 6 () Phone Settings. The Phone Settings menus are listed in

the display.

3. Press 9 () Quick Search.

4. Press the right soft key Info to display detail information about Quick

Search.

5. Select On or Off and press .

Searching for a Contact

1. In idle mode, press the first three numeric keys that correspond to the

letters of the contacts name.

For example, to search for “Sally” you would enter

2. Press the Up navigation key. The contact name is highlighted.

3. Press the key to call the contact.

Searching for a Menu Item

1. In idle mode, press the first three numeric keys that correspond to the

letters of the Menu item name.

For example, to search for “Inbox” you would enter

2. Press the Down navigation key. The menu item is highlighted.

3. Press the key to access the content of the menu item.

Call Settings

The Call Settings menu allows you to select the method for answering incoming
calls, setting redial options, setting data rates for data calls, voice privacy, and more.

SAL LY

INBOX

Section 8: Changing Your Settings 92

Answer Options

The Answer Options menu allows you to select the method for answering incoming
calls.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 7 () Call Settings. The Call Settings menus are listed in the

display.

3. Press 1 ()

Answer Options. The following options appear in the

display:

• Flip Open: Calls are answered when the flip is opened.

• Any Key: Calls are answered when any key (other than ) is pressed.

• Send Only: Calls are answered only when the key is pressed.

• Auto Answer: Calls are answered automatically with a 1, 3 or 5 second delay.

4. Use the navigation key to highlight the method you wish to use for

answering calls, then press .

Auto Retry

Auto Retry automatically redials busy numbers after a preset period of time.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 7 () Call Settings. The Call Settings menus are listed in the

display.

3. Press 2 ()

Auto Retry. The following options appear in the display:

• Off

• Every 10 Seconds

• Every 30 Seconds

• Every 60 Seconds

4. Use the navigation key to select an option and press .

TTY Mode

Before you can use your phone with a TTY device, you’ll need to enable TTY
functions in the phone. See "TTY" on page 30 for more information.

One Touch Dial

You can use this option to enable or disable the speed dialing feature.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

1. Press 7 () Call Settings. The Call Settings menus are listed in the

93

display.

2. Press 4 ()

One Touch Dial. Select On or Off and press .

See "Speed Dialing" on page 57 for more information.

Voice Privacy

Note: This feature is only available on the Verizon Wireless network.

Voice Privacy (at the Enhanced setting) allows you to prevent those you call from

seeing your number in their display when receiving your call. Voice privacy options
are Standard and Enhanced.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 7 () Call Settings. The Call Settings menus are listed in the

display.

3. Press 5 () Voice Privacy. The following options appear in the

diplay:

• Standard

• Enhanced

4. Use the navigation key to select an option and press .

Call Restrictions

Call Restriction allows you to restrict outgoing and incoming calls. You can also
restrict access to your Contacts list.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 7 () Call Settings. The Call Settings menus are listed in the

display.

3. Press 6 () Call Restrictions.

4. Use the navigation key to select Outgoing, Incoming, or Contacts, then

press .

5. Use the navigation key to select On or Off, then press .

Data Settings

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 7 () Call Settings. The Call Settings menus are listed in the

display.

Section 8: Changing Your Settings 94

3.

Press 7 () Data Settings. The following options appear in the

display:

• Data Off: Phone operates in normal voice call mode.

• Data For Next Call: Data call is enabled for next call only. Phone will reset to
Data Off mode after call.

• Data Until Powered Off: Phone will remain in Data Mode until phone is
powered off.

4. Use the navigation key to select an option and press .

DTMF Tones

Use this menu to set DTMF settings to Normal, or Long.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 7 () Call Settings. The Call Settings menus are listed in the

display.

3. Press 8 () DTMF Tones. The following options appear in the display:

• Normal: Select for a normal tone.

• Long: Select for an extended tone.

4. Use the navigation key to select an option and press .

Memory

The Memory menu allows you to manage your Save Options (for Pictures, Videos,
and Sounds) on your Phone Memory or Card Memory. You can also set the
memory usage for pictures, videos, music, sounds, and ringtones on your phone and
microSD™ card.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 8 () Memory. The Memory menus are listed in the display.

The following options are available:

• Save Options: You can set your Pictures, Videos, and Sounds to be saved to

either phone memory or card memory.

• Phone Memory: Allows you to see the memory usage for everything stored on

your phone. The following options are available:

• Phone Memory Usage: Displays the current memory usage and allocation figures
for the various applications and folders stored on the phone. These include: Total
Used, Available, My Pictures, My Videos, Ringtones, My Music, My Sounds,
Applications, and Picture/Video Msg.

• My Pictures: Pictures you have saved from a Picture message, downloaded via
the “Get It Now” application, or taken using your phone.

95

• My Videos: Video Clips you have saved from a Video message, downloaded via
the “Get It Now” application, or taken using your phone.

• My Ringtones: Ringtones you have downloaded via the “Get It Now” application.

• My Music: Music you have downloaded directly from the V CAST Music catalog or
music you have transferred from your PC using Sync Music.

• My Sounds: Sounds you have recorded using your phone or saved from a Picture
message with Sound attached.

Note: Your phone does not come with the microSD™ memory card and must be purchased as an
accessory. See your service provider for more information.

• Card Memory: Allows you to see memory usage of everything stored on your

microSD™ card. The following file options are available for the removable
microSD™ memory card:

• Memory Usage: Displays the current memory usage and allocation figures for the
various applications and folders stored on the card. These include: Total Used,
Available, My Pictures, My Videos, Ringtones, My Music, My Sounds,
Applications, and Picture/Video Msg.

• My Pictures: Pictures you have saved from a Picture message or taken using your
phone.

• My Videos: Video Clips you have saved from a Video message or taken using your
phone.

• My Music: Music you have downloaded directly from the V CAST Music catalog or
music you have transferred from your PC using Sync Music.

• My Sounds: Sounds you have recorded using your phone or saved from a Picture
message with Sound attached.

Phone Info

The Phone Info menu allows you to view the software and hardware information,
your assigned number, and an icon glossary for your phone.

1. In idle mode, press MENU, use the right navigation key to highlight

Settings & Tools and press .

2. Press 9 () Phone Info.

3. My Number is highlighted. Press 1 () My Number to display the

Mobile Device and Identification numbers.

4. Press 2 ()

SW Version to view the software, PRL, ERI, Browser, Get

it Now, and Hardware versions available on your phone.

5. Press 3 ()

Icon Glossary to view the list of icons with a brief

description.

6. Press to return to the Phone Info menu.

Section 9: Multimedia 96

Section 9: Multimedia

Topics Covered

• Get It Now

• Music & Tones

• Picture & Video

•Games

• News & Info

• Tools on the Go

•Extras

The topics covered in this section are audio and video, graphics, voice command,
games, calendar, schedule events, set an alarm, and perform simple math
calculations.

Note: This feature is only available for use while the phone is in a lanscape orientation. See "Section 2:
Understanding Your Phone" on page 8 for more information on setting your phone to landscape mode.

Get It Now

The Get It Now menu provides sub-menus to Music & Tones, Picture & Video,
Games, News & Info, Tools on the Go and Extras. You can also view memory info to
see how much space you’ve used (and have left) for stored media. Use the following
steps for each GET IT NOW sub-menu.

1. Open your handset in Landscape mode.

2. Access the GET IT NOW menu by pressing the right navigation key while in

idle mode.

3. Press the right soft key Info.

4. Press 1 () App. Memory to display the memory available. Press the

key to return.

97

5.

Press 2 () Content Memory to view the memory used for the

following items. Press the key to return.

• My Ringtones

• My Music

• My Sounds

• My Pictures

• My Videos

• Applications

• Picture-Video Msg

6. Press 3 () View Log to see the file transfer activity.

7. Press the key to return.

8. Press 4 () Help to display a list of frequently asked questions. Use

the navigation key to highlight an item and press to display help text.

9. Press the key to return.

Music & Tones

This menu allows you to get new tunes and tones, record new sounds, and set tunes
and tones as your ringtone. It also allows you to access your music files.

V CAST Music

You can use the V CAST Music option to download music from the V CAST Music
catalog directly to phone memory or to a removable memory card*. Before
downloading music to your microSD™ memory card, be sure to format it as
described below.

Formatting microSD™ Card using your PC

For best playback of songs stored to the microSD™ memory card, you should
reformat your memory card with PC format FAT32.

Note: Any contents currently stored on the microSD™ memory card will be lost after this procedure is
performed.

*Memory Card sold seperately.

1. Insert the microSD™ memory card into an SD card adapter.

2. Insert the SD card adapter into the SD card reader slot.

3. Plug the SD card reader into a USB port on your PC.

4. On your PC, go to your My Computer directory and highlight the drive that

represents the SD card reader.

5. Right click and select the Format option.