To receive more complete service,
please register your product at
www.samsung.com/global/register
features
Playback of many disc types
The HT-Z310/HT-TZ312 allows you to play back various discs, including DVD-AUDIO, DVD-VIDEO, CD, MP3-CD,
WMA-CD, DivX, CD-R/RW, and DVD±R/RW.
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio. The on-board 24-bit/192kHz DAC enables this player to
deliver exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail.
USB Host support
You can enjoy media fi les such as pictures, movies and music saved on an MP3 player, digital camera or USB
memory stick by connecting the storage device to the USB port of the Home Theater.
Dolby Pro Logic II
Dolby Pro Logic II is a form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro
Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency 5.1 channel
sound.
TV Screen Saver Function
If the main unit remains in Stop mode for 3 minutes, the Samsung logo appears on the TV screen.
The HT-Z310/HT-TZ312 will automatically switch to the Power Saving mode after 20 minutes in the Screen Saver mode.
Power Saving Function
The HT-Z310/HT-TZ312 will automatically shut off after 20 minutes in Stop mode.
Customized TV Screen Display
The HT-Z310/HT-TZ312 allows you to select your favorite image during JPEG or DVD playback and set it as your
background wallpaper.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate the main unit using a Samsung TV remote control, by connecting the
Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TV's that support
Anynet+.)
iPod support
You can enjoy music fi les by connecting your iPod to the home theater with the supplied iPod dock.
AV SYNC Function
Video may lag behind the audio if the unit is connected to a digital TV.
To compensate for this, you can adjust the audio delay time to sync up with the video.
WHAT’S INCLUDED
Check for the supplied accessories below.
Video CableFM AntennaiPod Dock Package
2
User's Manual
Remote Control
/ Batteries (AAA size)
3
ENG
safety information
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER (or BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage”
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION : INVISIBLE LASER RADIATION WHEN
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
OPEN AND INTERLOCKS DEFEATED,
AVOID EXPOSURE TO BEAM.
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
safety information
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep
these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these Instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8)
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10)
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11) Only use attachment/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
4
5
ENG
PRECAUTIONS
Phones
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which
may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off
the DVD player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the
power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect the AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
Protect the player from moisture (i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric fields
(i.e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use. Use of
this product is for personal use only.
Condensation may occur if your player or disc has been stored in
cold temperatures. If transporting the player during the winter,
wait approxi
before using.
mately 2 hours until the unit has reached room temperature
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
The batteries used with this product contain chemicals that are harmful
to the environment.
Do not dispose of batteries in the general household trash.
This product is covered by one or more of the following U.S. patents:
This product is covered by the following U.S. patents:
US4,930,158 US4,930,160
contents
FEATURES
2
SAFETY INFORMATION
3
GETTING STARTED
8
DESCRIPTION
11
REMOTE CONTROL
14
CONNECTIONS
18
2 What’s included
3 Safety Warnings
4 Important Safety Instructions
5 Precautions
8 Before Reading the User’s Manual
9 Playable Discs
9 Do not use the following types of disc!
9 Copy Protection
10 Disc Type and Characteristics
11 Front Panel
12 Display
13 Rear Panel
14 Tour of the Remote Control
16 Setting the Remote Control
18 Connecting the Speakers
23 Connecting the Optional Wireless Receiving
Amplifier
25 Connecting the Video Out to your TV
27 HDMI Function
28 Connecting an iPod
30 Connecting Audio from External
Components
32 Connecting the FM Antenna
BEFORE USING YOUR HOME
THEATER
33 Before using your home theater
33
PLAYBACK
34
6
34 Disc Playback
35 MP3/WMA-CD playback
36 Jpeg File Playback
37 Divx Playback
39 Using The Playback Function
48 Using the iPod
49 Playing Media Files Using The Usb Host
Feature
7
ENG
SYSTEM SETUP
51
RADIO
51 Setting the Language
52 Setting TV Screen Type
53 Setting Parental Controls (Rating Level)
53 Setting the Password
54 Setting The Wallpaper
54 To Select one of the 3 Wallpaper Settings
you've made
55 DVD Playback Mode
55 Setting the Speaker Mode
56 Setting the Delay Time
57 Setting the Test Tone
57 Setting the Audio
58 Setting the DRC (Dynamic Range
Compression)
59 Setting the AV SYNC
59 Setting the HDMI Audio
60 Sound field (DSP)/EQ Function
60 Dolby Pro Logic II Mode
61 Dolby Pro Logic II Effect
61 P.BASS
62 Listening To Radio
62 Presetting Stations
62
CONVENIENT FUNCTION
63
TROUBLESHOOTING
64
USB HOST FEATURE SUPPORTED
PRODUCTS
66
APPENDIX
67
63 Sleep Timer Function
63 Adjusting Display Brightness
63 Mute Function
64 Troubleshooting
66 Digital Camera
66 USB Flash Disc
66 MP3 Player
67 Cautions on Handling and Storing Discs
68 Specifications
69 Warranty
getting started
BEFORE READING THE USER’S MANUAL
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
IconTermDefinition
This involves a function available with DVD or DVD-R/DVD-RW discs that
have been recorded and finalized in Video Mode.
d
DVD
B
A
G
D
M
M
CDThis involves a function available with a data CD (CD-R or CD-RW).
MP3This involves a function available with CD-R/-RW discs.
JPEGThis involves a function available with CD-R/-RW discs.
DivX
Caution
Note
In this manual, the instructions marked with "DVD (
`
VIDEO, DVD-AUDIO and DVD-R/-RW discs that have been recorded in Video Mode
and then finalized. Where a particular DVD type is mentioned, it is indicated
separately.
If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be
`
playable.
This involves a function available with MPEG4 discs.
(DVD±R/RW, CD-R or CD-RW)
This involves a case where a function does not operate or settings may be
cancelled.
This involves tips or instructions on the page that help each function
operate.
)" are applicable to DVD-
DVD
About the use of this user’s manual
Be sure to be familiar with Safety Instructions before using this product. (See pages 3~5)
1)
If a problem occurs, check the Troubleshooting. (See pages 64~65)
All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the
prior written permission of Samsung Electronics Co.,Ltd.
8
9
ENG
● GETTING STARTED
COMPACT
DIGITAL AUDIO
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
16
~
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
PLAYABLE DISCS
Disc TypeMark (Logo)Recorded Signals Disc Size Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
—
—
DVD-AUDIO
DVD-VIDEO
AUDIO-CD
DivXAUDIO + VIDEO
AUDIO + VIDEO
AUDIO
5 inches
3 1/2 inches
5 inches74 min.
3 1/2 inches20 min.
5 inches
3 1/2 inches
DO NOT USE THE FOLLOWING TYPES OF DISC!
LD, CD-G, CD-I, CD-ROM, DVD-ROM and DVD-RAM discs cannot be played on this player.
~
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
~
If such discs are played, a <CAN'T PLAY THIS DISC PLEASE, CHECK REGION CODE> message appears on the
TV screen.
COPY PROTECTION
Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player
~
directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
~
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
getting started
DISC TYPE AND CHARACTERISTICS
This product does not support Secure (DRM) Media files.
CD-R Discs
❖
Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the
~
condition of the disc.
~
Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minutes as they may not be played back.
Some CD-RW (Rewritable) media, may not be playable.
~
Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you
~
may not be able to fully play the disc.
CD-R MP3 Discs
❖
Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
~
MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters
~
(. / = +).
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
~
Only files with the "mp3" and extensions can be played.
~
Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession
~
disc, the disc can be played only up to the blank segment.
~
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
~
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
A maximum of 500 tracks can be played per CD.
~
A maximum of 300 folders can be played per CD.
~
CD-R JPEG Discs
❖
Only files with the "jpg" extensions can be played.
~
~
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
~
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
~
JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters
(. / = +).
~
Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank segment.
A maximum of 9,999 images can be stored on a single CD.
~
~
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
~
DVD±R/RW, CD-R/RW DivX Discs
❖
Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the
~
user might not play.
Software updates for incompatible formats are not supported.
~
(Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.)
~
Sections with a high frame rate might not be played while playing a DivX file.
For more information about the formats authorized by DivX Networks, Inc., please visit "www.divxnetworks.
~
net".
10
11
ENG
● DESCRIPTION
AUX IN 1
AUX IN 1
description
FRONT PANEL
1011
FUNCTION BUTTON
TUNING DOWN & SKIP ( )
BUTTON
STOP (T) BUTTON
PLAY/PAUSE ( ) BUTTON
TUNING UP & SKIP ( ) BUTTON
VOLUME CONTROL
OPEN/CLOSE BUTTON
DISC TRAY
USB CONNECTOR
AUX IN 1 CONNECTOR
10
POWER( ) BUTTON
11
description
DISPLAY
FUNCTION DISPLAYCD INDICATOR
REPEAT INDICATORUSB INDICATOR
HDMI INDICATOR
DISC INDICATORDSP INDICATOR
DVD INDICATOR
DTS DISC INDICATOR
SYSTEM STATUS DISPLAY
10
1011 12
RADIO FREQUENCY INDICATOR
11
DOLBY DIGITAL INDICATOR
12
PRO LOGIC INDICATOR
13
LPCM INDICATOR
14
13 14
12
13
ENG
● DESCRIPTION
REAR PANEL
ipod
AUX IN 2
ipodAUX IN 2
ipod
AUX IN 2
109
TX CARD CONNECTION (WIRELESS)
23167
485
The TX card enables communication between the main unit and the
optional wireless receiver amplifi er.
iPod JACK
VIDEO OUTPUT JACK
AUX IN 2 JACKS
External Digital Optical Input Jack
HDMI OUT JACK
COMPONENT VIDEO OUTPUT JACKS
FM 75Ω COAXIAL JACK
SPEAKER OUTPUT CONNECTORS
9
COOLING FAN
10
Connect the iPod dock connector here.
Connect the TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
Connect to the 2CH analog output of an external device (such as a VCR)
Use this to connect external equipment capable of digital output.
Use the HDMI cable, connect this HDMI output terminal to the HDMI input
terminal on your TV for the best quality picture.
Connect a TV with Component video inputs to these jacks.
Connect the FM antenna.
Connect the front, center, rear speakers and subwoofer.
The fan always revolves when the power is on. Ensure a minimum of
4 inches of clear space on all sides of the fan when installing the
product.
1. Remove the battery
cover in the direction
of the arrow.
M
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
`
Use the correct type of batteries. Batteries that look similar may differ in voltage.
`
Always replace both batteries at the same time.
`
Do not expose the batteries to heat or a flame.
`
2. Insert two 1.5V AAA batteries, paying
attention to the correct polarities
(+ and –).
3. Replace the battery
cover.
remote control
SETTING THE REMOTE CONTROL
You can control certain functions of your TV with this remote control.
When operating a TV with the remote control
1. Press the TV button to set the remote to TV mode.
2. Press the POWER button to turn on the TV.
3. While holding down the POWER button, enter the code
corresponding to your brand of TV.
If there is more than one code listed for your TV in the
~
table, enter one at a time to determine which code works.
Example : For a Samsung TV
While holding down the POWER button, use the number
buttons to enter 00, 15, 16, 17 or 40.
4. If the TV turns off, the setting is complete.
You can use the TV POWER, VOLUME, CHANNEL, and
~
Numeric buttons (0~9).
M
The remote control may not work on some brands of TVs. Also, some operations may not
`
be possible depending on your brand of TV.
If you do not set the remote control with the code for your brand of TV, the remote control
`
will work on a Samsung TV by default.
Operation Range of the Remote Control
The remote control can be used up to approximately
23 feet (7 meters) in a straight line.
It can also be operated at a horizontal angle of up to 30° from the
remote control sensor.
This section involves various methods of connecting the Digital Home Theater to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
CONNECTING THE SPEAKERS
Position of the DVD Player
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8feet)
Front Speakers
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ear.
Align the front face of the front speakers with the front face of the center speaker or place them slightly in front
of the center speakers.
Center Speaker
It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.
Rear Speakers
Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each
other. Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.
*
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
For 55" TVs 3.5~4m (11~13feet)
ei
f
hj
Unlike the front and center speakers, the rear speakers are used to handle mainly sound effects and sound will not
come from them all the time.
18
19
ENG
● CONNECTIONS
HT-Z310
Speaker Components
(L)(R)
(L)(R)
REAR
CENTER
FRONT/REAR
CENTER
FRONT/REAR
FRONT
CENTER
SUBWOOFER
Installing the Cradle Stand
1. Insert the stand so that it fi ts into the hole
as described in the fi gure.
2. Turn the stand clockwise to lock it.
(Turning it counter-clockwise will loosen
from the hole.)
CRADLE STAND/
WALL MOUNT
HOLE COVER
<Front/Rear> <Center>
11
22
3. This is the completion of the stand
installation.
33
connections
CONNECTING THE SPEAKERS (CON'T)
Installing the Wall Mount
1. Insert the wall mount so that it fi ts into the
rear hole of the speaker as in the fi gure.
<Front/Rear> <Center>
11
2. Turn the wall mount counter clockwise to
fi x it. (This is the reverse direction to the
cradle stand.)
3. Put the hole cover on the hole of the
speaker.
4. Use a coin turn the hole cover clock wise
to fi x it. (Turning it count-clock wise will
loosen from the hole.)
5. Use the wall mount hole (bracket) to install
the speaker on the wall.
22
33
44
55
20
M `
To avoid accident fall and consequent damage to the customer and speaker, make sure
the speaker is hung safely.
21
ENG
● CONNECTIONS
HT-TZ312
Speaker Components
(L) (R)
(L) (R)
REAR
CENTER
SCREW (Small): 6EA
CENTER
CENTER
SCREW (Large): 4EA
REAR
FRONT
HOLE COVER
How to Install the Speaker on the Stand
Turn the STAND upside-down and connect
1.
it to the STAND BASE.
Insert three small SCREWS into three holes
2.
marked with arrows using a screwdriver as
shown in the illustration.
Insert a large SCREW into the hole on the
3.
rear of the Speaker STAND.
Connect the assembled stand to the
4.
SPEAKER.
Insert another large SCREW into the hole
5.
on the rear of the speaker using a
screwdriver as shown in the illustration.
This is the successfully assembled speaker.
6.
Make sure that the speaker is installed on a
fl at and stable area. Otherwise it may be
easily knocked over.
REAR
CRADLE STAND/
WALL MOUNT
SUBWOOFERSTAND BASESTAND
12
STAND
BASE
STAND
34
56
SPEAKER
STAND
How to Install the Speaker on the Stand Base
Connect the SPEAKER with the
1.
STAND BASE.
Insert the SCREW into the hole on the rear
2.
of the speaker using a screwdriver as shown
in the illustration.
This is the SPEAKER successfully
3.
assembled with the Stand Base.
12
3
SPEAKER
STAND
BASE
Loading...
+ 50 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.