Samsung 911LT User Manual
!! !!
SyncMaster 711LT/ 911LT
Install drivers Install programs
r
Notation
Failure to follow directions noted by this symbol could result in bodily harm or damage to the
equipment.
Prohibited Important to read and understand at all times
Do not disassemble Disconnect the plug from the outlet
Do not touch Ground to prevent an electric shock
Powe
When not used for extended period of time, set your computer to DPM.
If using screen saver, set it to active screen mode.
The images here are for reference only, and are not applicable in all cases (or
countries).
Do not use a damaged power cord or plug or a damaged or loose power outlet.
Otherwise, this may result in electric shock or fire.
Do not touch the power plug with wet hands when removing or plugging the plug into
the outlet.
Otherwise, this may result in electric shock.
Make sure to connect the power cord to a grounded power outlet.
Otherwise, it may result in electric shock or personal injury.
Ensure that the power plug is plugged into the power outlet firmly and correctly.
Otherwise, this may result in fire.
Do not forcefully bend or pull the power plug and do not place any heavy material on
it.
Otherwise, this may result in fire.
Do not connect multiple appliances to the same power outlet.
Otherwise, this may cause fire due to overheating.
Do not disconnect the power cord while using the product.
Otherwise, this may result in damage to the product due to electric shock.
To disconnect the apparatus from the mains, the plug must be pulled out from the
mains socket, therefore the mains plug shall be readily operable.
This may cause electric shock or fire.
Use only the power cord provided by our company. Do not use the provided power
cord of another product.
Otherwise, this may result in fire or electric shock.
Installation
Be sure to contact an authorized Service Center when installing your monitor in a
location with heavy dust, high or low temperatures, high humidity, and exposed to
chemical substances and where it operates for 24 hours such as at airports, train
stations etc.
Failure to do so may cause serious damage to your monitor.
Do not drop the monitor when moving it.
This may cause damage to the product or the person carrying it.
Ensure that at least two persons lift and move the product.
Otherwise, it may be dropped and cause personal injury, and/or damage the
product.
When installing the product in a cabinet or rack, make sure that the front end of the
bottom of the product does not project out.
Otherwise, it may fall or cause personal injury.
Use a cabinet or rack of a size appropriate to the product.
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGARETTES AND ANY
HEATING APPLIANCES NEAR THE PRODUCT.
Otherwise, this may result in fire.
Keep heating appliances as far away from the power cord or the product as possible.
Otherwise, this may result in electric shock or fire.
Do not install it in a badly ventilated location such as a bookcase or closet.
Otherwise, this may result in fire due to an increase in the internal temperature.
Put down the monitor carefully.
Failing to do so may damage the monitor.
Do not place the front of the product on the floor.
Otherwise, this may result in damage to the screen display.
Ensure that an authorized installation company installs the wall mount.
Otherwise, it may fall and cause personal injury.
Make sure to install the specified wall mount.
Install your product in a well ventilated location. Ensure that there is a clearance of
more than 10 cm from the wall.
Otherwise, it may result in fire due to an increase in the internal temperature.
Cleaning and Using
Ensure that the packaging vinyl is kept away from children.
Otherwise, it may result in serious harm (suffocation) if children play with it.
If the height of your monitor is adjustable, do not place any object or part of your body
on the stand when lowering it.
This may cause damage to the product or the person carrying it.
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a
slightly moistened and soft fabric.
Do not spray cleaner directly onto the surface of the product.
Otherwise, this may result in the discoloration and distortion of the structure and
the screen surface may peel off.
Clean the product using a soft cloth with a monitor cleaner only. If you must use a
cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10.
When cleaning the power plug pins or dusting the power outlet, clean it with a dry
cloth.
Otherwise, it may result in fire.
When cleaning the product, make sure to disconnect the power cord.
Otherwise, it may result in electric shock or fire.
When cleaning the product, disconnect the power cord and clean it softly with a dry
cloth.
(Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito repellant,
lubricant, or cleaner.) These may change the appearance of the product surface
and peel off the indication labels on the product.
Since the product housing is easily scratched, make sure to use the specified cloth
only.
Use the specified cloth adding only a little water. As the product may be scratched
if there is any foreign material on the cloth, make sure to shake it thoroughly
before using it.
When cleaning the product, do not spray water directly onto the main body of the
product.
Ensure that water does not enter the product and that it is not wet.
Otherwise, this may result in electric shock, fire or a malfunction.
Others
The product is a high voltage product. Ensure that users do not disassemble, repair
or modify the product themselves.
Otherwise, this may result in electric shock or fire. If the product needs to be
repaired, contact a Service Center.
If there is a strange smell or a strange sound or smoke is coming from the product,
disconnect the power plug immediately and contact a Service Center.
Otherwise, this may result in electric shock or fire.
Do not place this product in a location exposed to moisture, dust, smoke, water, or in
a car.
Otherwise, this may result in electric shock or fire.
When you drop the product or the case is broken, turn the power off and disconnect
the power cord. Contact a Service Center.
Otherwise, this may result in electric shock or fire.
If thunder or lightening is occurring, do not touch the power cord or antenna cable.
Otherwise, this may result in electric shock or fire.
Do not try to move the monitor by pulling only the wire or the signal cable.
Otherwise, it may fall and result in electric shock, damage to the product or fire due
to damage to the cable.
Do not lift or move the product back and forwards or right and left while only holding
the power cord or signal cables.
Otherwise, it may fall and result in electric shock, damage to the product or fire due
to damage to the cable.
Make sure that the ventilating opening is not blocked by a table or curtain.
Otherwise, it may result in fire due to an increase in the internal temperature.
Do not place any containers containing water, vases, flowerpots, medicines as well as
any metal on the product.
If water or a foreign material enters the product, disconnect the power cord and
contact a Service Center.
This may result in a product malfunction, electric shock, or fire.
Do not use or keep combustible spray or flammable material near the product.
Otherwise, this may result in an explosion or fire.
Do not insert any metal, such as chopsticks, coins, pins and steels, or inflammable
objects, such as matches or paper, inside the product (through the ventilating
openings, input and output terminals, etc).
If water or foreign material enters the product, disconnect the power cord and
contact a Service Center.
Otherwise, this may result in electric shock or fire.
When using a fixed screen for a long time, an afterimage or stain may occur.
If you are not using your product for a long period of time, put it into sleep mode or
use a moving screen saver.
Set a resolution and frequency appropriate to the product.
Otherwise, your eyesight may be damaged.
When using headphones or earphones, do not turn the volume too high.
Having the sound too loud may damage your hearing.
If you continually move closer to the product screen, your eyesight may be failingt.
To ease eye strain, take at least a five-minute break after every hour of using the
monitor.
Do not install it in an unstable location such as an unstable rack or uneven surface or
a location exposed to vibrations.
Otherwise, it may fall and cause personal injury and/or damage the product.
If you use the product in a location exposed to vibrations, it may damage the
product and result in fire.
When moving the product, turn the power off and disconnect the power plug, antenna
cable, and all the cables connected to the product.
Otherwise, it may result in electric shock or fire.
Ensure that children do not hang onto the product or climb up onto the product.
The product may fall and cause personal injury or death.
If you do not use the product for a long period of time, disconnect the power cord from
the power outlet.
Otherwise, this may result in overheating or fire due to dust, and may result in fire
due to electric shock or leakage.
Do not place any heavy items or toys or confectionery, such as cookies etc. that may
attract the attentions of children onto the product.
Your children may hang onto the product causing it to fall and this may result in
personal injury or death.
Do not turn the product upside down or move it while holding only the stand.
Otherwise, it may fall and result in personal injury and/or damage to the product.
Do not place the product in a location exposed to direct sunlight or near any heat
such as a fire or heater.
This may reduce the lifetime of the product, and may result in fire.
Do not drop any objects onto the product or cause any impact to the product.
Otherwise, this may result in electric shock or fire.
Do not use a humidifier or kitchen table near the product.
Otherwise, this may result in electric shock or fire.
When there is a gas leak, do not touch the product or the power plug but ventilate
immediately.
If a spark occurs, it may cause an explosion or fire.
If the product has been turned on for a long time, the display panel becomes hot. Do
not touch it.
Keep the small accessories in a location out of the reach of children.
Be careful when adjusting the angle of the product or the height of the stand.
This may result in personal injury as your hand or fingers may become caught.
Also, if you tilt the product too far, it may fall and cause personal injury.
Do not install the product in a location low enough for children to reach.
Otherwise, it may fall and result in personal injury.
Since the front part of the product is heavy, install the product on a level and stable
surface.
Do not put any heavy objects on the product.
This may result in personal injury and/or damage to the product.
Proper Seating Posture During Monitor Use
When using the product, use it in the correct position.
Keep your back straight while looking at the product.
z
The distance between your eyes and the screen should be between
z
45 to 50 cm. Look at the screen from a slightly higher location than
the height of the screen.
When using the product, use it in the correct position.
z
Adjust the angle so that light is not reflected on the screen.
z
Place your arms perpendicular to your sides and allow your arms to
z
be level with the back of the hand.
Keep your elbow at 90 degrees.
z
Keep your knees at greater than 90 degrees, and keep your heels
z
firmly on the floor. Keep your arms lower than your heart.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Features
Tuning the power off while booting up a Client may damage the monitor In addition, exit
all running programs before turning the monitor off.
What is Client Monitor?
Client Monitor is a new type of monitor that can be used as a general monitor and can also be used
as a terminal by connecting it to a host PC with a LAN connection so that you can use a Client
Monitor to access the Internet, create a document and edit an image file.
In addition, you can connect an external storage device (e.g. DSC, MP3, external storage, etc.) to the
USB port and enjoy music, video and games saved on the device.
Moreover, you can display your screen on another display device such as a projector through the
VGA OUT port so that the monitor can be utilized for various purposes such as video conferences,
joint-work, etc.
In addition, since Win CE is integrated within the monitor, you can search the Internet or USB
memory independently without connecting it to the host PC.
Package Contents
Unpackin
g
y
Y
r
Manual
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Without stand With Stand
Quick Setup Guide
Cable
Power Cord
Sold separatel
Keyboard (USB) Mouse (USB) D-Sub Cable
Warranty Card
(Not available in all
locations)
User's Guide, Monitor Driver,
Natural Color software,
MagicTune™ software
our Monito
Front
MENU button [ ]
MagicBright™ button
[]
Volume button [ ]
Adjust buttons [ ] Adjust items in the menu.
Enter button [ ]
/ SOURCE button
Opens the OSD menu. Also use to exit the OSD menu or return to the
previous menu.
MagicBright™ is a new feature providing optimum viewing environment
depending on the contents of the image you are watching. Currently six
different modes are available : Custom, Text, Internet, Game, Sport and
Movie. Each mode has its own pre-configured brightness value. You can
easily select one of six settings by simply pressing MagicBright™ control
button.
1) Custom
Although the values are carefully chosen by our engineers, the pre-
configured values may not be comfortable to your eyes depending on
your taste.
If this is the case, adjust the brightness and contrast by using the
OSD menu.
2) Text
For documentations or works involving heavy text.
3) Internet
For working with a mixture of images such as text and graphics.
4) Game
For watching motion pictures such as a game.
5) Sport
For watching motion pictures such as a sport.
6) Movie
For watching motion pictures such as a DVD or Video CD.
>> Click here to see an animation clip
When OSD is not on the screen, push the button to adjust volume.
Activates a highlighted menu item. /
Push the 'SOURCE', then selects the video signal while the OSD is off.
(When the SOURCE button is pressed to change the input mode, a
message appears in the upper left of the screen displaying the current
mode -- Analog or Client input signal.)
r
>> Click here to see an animation clip
AUTO button Use this button for auto adjustment.
Power button [ ]
Power indicator
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
Rea
>> Click here to see an animation clip
Use this button for turn the monitor on and off.
Be careful as pressing the Power button in client mode will shut down
Windows XPe. Be careful that if you force shut down Windows it may
cause damage.
In these cases your monitor will be forcefully shut down and this may
cause damage to your operating sysetm. Therefore ensure that the EWF
function is enabled.
1. Turn the power off by holding down the Power button after
switching to Monitor mode from Client mode.
2. Turn the power off by holding down the Power button for more
than five(5) seconds in Client mode.
When unable to boot up your computer because of a Windows crash,
please contact your Administrator.
This light glows green during normal operation, and blinks green once as
the monitor saves your adjustments.
The configuration at the back of the monitor may vary from product to product.
POWER IN port Connect the power cord for your monitor to the power port on the back of
VGA IN port Connect the signal cable to the 15-pin, D-sub port on the back of your
RS-232C Connection
Terminal
VGA OUT port Connect a monitor to another monitor through a D-Sub cable.
Kensington Lock The Kensington Lock is a device used to physically fix the system when
the monitor.
monitor.
Connect a RS-232C cable to this terminal.
using it in a public place. The locking device has to be purchased
separately. The appearance and locking method may differ from the
illustration depending on the manufacturer. Refer to the manual provided
with the Kensington Lock for proper use. The locking device has to be
purchased separately.
The location of the Kensington Lock may be different depending on its
model.
Using the Anti-Theft Kensington Lock
1.
Insert the locking device into the Kensington slot on the Monitor ( )
and turn it in the locking direction ( ).
2. Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a heavy stationary object.
Cable Fix Ring When connecting the cable is finished, fix the cables to the Cable Fix
Earphone jack [ ]
The Microphone
connection terminal (MIC)
Ring.
Headphone connection terminal.
Connect a microphone to the MIC terminal.
USB
(USB Connection
Terminal)
LAN
(LAN Connection
Terminal)
AUDIO IN Connect the audio cable for your monitor to the audio port on the back of
See Connecting Cables for further information regarding cable connections.
Connect USB devices such as a mouse, keyboard and external storage
devices (DSC, MP3, external storage, etc.).
Connect when using it as a monitor.
your computer.
Connecting Cables
)
Connecting Cables (When used as a normal monitor
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use appropriate connection for your computer.
Using the D-sub (Analog) connector on the video card.
- Connect the D-Sub Cable to the VGA IN port on the back of your monitor.
[VGA IN]
Using Macintosh
External Device Connection
- Connect the monitor and the Macintosh computer using the computer connection cable.
If the monitor and the computer are connected, you can turn them on and use them.
USB
(USB Connection Terminal)
LAN
(LAN Connection Terminal)
RS-232C Connection
Terminal
D-sub 15-pin port
[VGA OUT]
Connect USB devices such as a mouse, keyboard and external
storage devices (DSC, MP3, external storage, etc.).
Connect the LAN cable.
Connect a RS-232C cable to this terminal.
Use it by connecting it to another monitor.
(The picture of the main monitor is displayed on the connected
monitor.)
Using the Stand
Tilt angle
You can tilt the monitor screen forward to adjust the angle to a particular angle.
Swivel stand
You can easily adjust the position of the monitor screen from right to left using the rotating stand. Rubber
stubs are attached at the bottom of the monitor to help fix it to the installation location.
Using Other Stands
Attaching a Base
This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
Monitor Mounting interface pad ( Sold separately )
Turn off your monitor and unplug its power cord.
Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
Remove four screws and then remove the stand from the LCD monitor.
Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four
screws that came with the arm-type base, wall mount hanger or other base.
Do not use screws longer than the standard dimension, as they may damage the inside of the
z
Monitor.
For wall mounts that do not comply with VESA standard screw specifications, the length of the
z
screws may differ depending on their specifications.
Do not use screws that do not comply with the VESA standard screw specifications.
z
Do not fasten the screws too tightly, as this may damage the product or cause the product to
fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified
z
wall mount is used or the consumer fails to follow the product installation instructions.
To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to
z
mount the monitor at least 10cm away from the wall surface.
Contact the nearest Samsung Service Center for more information. Samsung Electronics will
z
not be responsible for damages caused by using a base other than those specified.
z
Please use Wall Mount according to the International standards.
Introduction
Welcome
Congratulations on purchasing one of the Samsung Linux-based Thin Client models. The Samsung
Thin Clients are composed of state-of-the-art hardware and an operating system based on the
Samsung Flash Linux Technology. We have done our best to deliver an excellent product and we
promise to provide support and service of the same quality.
Please refer to the "Software Feature Comparison List" to get an overview of the supported
software features and protocols of the different Samsung Thin Client models.
How to Use This Guide
In this STC User Guide we describe the setup screens and options as well as the boot procedure.
We do not describe common functionalities like TCP/IP, NFS, SMB, XDMCP, DHCP, and BOOTP,
etc. If you have any questions concerning these matters please ask your system administrator or, if
you would like to know more about protocols, please refer to the corresponding documentation.
Quick Overview of Supported Features
List of Supported Features in STC Linux
Feature Name
Citrix ICA 9 9
RDP Rdesktop Rdesktop
VNC Client Real VNC Real VNC
VNC Server x11vncserver x11vncserver
Xorg 7.2 7.2
Samba Support Yes Yes
NFS Support Yes Yes
XDMCP Yes Yes
Printer Support Thin Print, USB, Network
Mozilla Firefox 1.0 1.0
PDF Reader Xpdf Xpdf
Terminal Emulator Xterm Xterm
711 LT
Printer (Postscript)
911 LT
Thin Print, USB, Network
Printer (Postscript)
PXE Network Boot Support Yes Yes
g
X
r
SSH Yes Yes
DHCP Yes Yes
DPMS Yes Yes
Screen Saver Yes Yes
USB Mass Storage Yes Yes
File Browser EmelFM2 EmelFM2
Smart Card Support Yes Yes
Icewm 1.2.32 1.2.32
Thin Print Yes Yes
Boot Procedure
System BIOS
The BIOS looks for extensions in the appropriate memory area. The next step is the execution of
the master boot record, which starts a secondary stage loader.
Secondary Stage Loader and Boot Menu
The secondary stage loader provides the user with a boot menu. The boot option can be selected
by using arrow keys and then made to run by using the enter key. By default, the STC boots into the
default choice after the specified timeout. You can then choose between 2 boot options and the
option of starting the Thin Client in its factory defaults safe mode.
Normal Boot
z
z
Silent Boot
{
Verbose Boot
{
Safe Boot
Normal Boot
Silent Boot
"Silent Boot" is the standard boot mode; it suppresses all messages from the kernel and starts
up the graphical desktop. It displays a progress bar along with a text message when major
checkpoints in the boot process are reached.
Verbose Boot
If the "Verbose Boot" is chosen (by pressing the key "F2"), the boot messages are shown and
there will be a detailed display of the boot process and its execution.
Safe Boot
If you choose "Safe Boot" (setup only with standard parameter values), the secondary stage
loader looks for a bootable system in the flash and continues the boot process as in the other
boot modes. It basically does booting with a default X-server configuration without the bootsplash
screen. This method will restore your display settings to default in main boot. This method is very
useful in case you need to restore corrupted display to restore to the original settings of the
system. Please beware that all your display related custom settings will get changed.
Networkin
After loading the kernel the network configuration follows. Two different ways can be chosen to
include the terminal in the network environment. According to the settings of the terminal, DHCP
broadcast or manual configured IP address can be used for this purpose.
-Serve
The last step of the boot procedure is the start of the X-Server and the local window manager.
Once the boot procedure completes, a desktop will be displayed on the screen as shown below.
r
y
Control Center (Global Settings)
Starting the Control Cente
Once the STC boots up, you have the option to set the STC as per your choice using the settings
provided in the Control Panel. The Control Panel can be accessed using two methods.
From the start menu
Select the Settings option from the Start Menu. You can set up your STC using the options provided
in the Settings tab. The various setting options provided are
Display
z
Input
z
Printer
z
Network
z
Time
z
System
z
Upgrade
z
The following figures demonstrate how to open the Control Panel from the Start Menu.
Click on the Start button.
z
Choose Settings tab.
z
Select any one of the 7 options (as shown below), to open the Control Panel Settings for the
z
particular option selected.
Displa
The Display Tab has five options that can be changed.
Resolution
It can be set to any one of the following screen size.
z
800 x 600
z 1024 x 768
z
1280 x 1024
Color
It can be set to any one of the following color depths.
( Low Color / 256 Colors)
z 8 bit
z
z
( High Color / 65,535 Colors)
16 bit
( True Color / 16.7 Million Colors)
24 bit
Screen Saver
It can be set to any one of following types with Waiting Time.
: In this, the screensaver option is disabled. This is the default choice.
z
None
z
Floating
: In this, a bitmap image is used as the screensaver by making the image to float
all over on the monitor background once the system is left idle for the specified screensaver
timeout.
z Monitor Suspend
: This is the energy saving phase wherein the monitor is left blank once
the screensaver timeout is exceeded.
Along with this, you can also set the waiting time before the screen saver is activated.
Themes
We can set the theme of the overall system among the three available options.
Vista Black
z
IceBuntu
z
Windows Classic
z
Background
The background can be specified either by specifying wallpaper or letting the theme deciding the
background color. The wallpaper can be set in three formats.
Input
Mouse
Button Configuration
Set the type of the attached mouse device from these two options:
z
Left Handed -
mouse buttons.
z
Right Handed -
Changes the orientation of the mouse to left hand by swapping the
Changes the orientation of the mouse to left hand by swapping the
mouse buttons.
Pointer Speed
The mouse pointer speed can be changed using this option. The default speed is set as 5. It
can be set as to be anywhere between 0.0 and 20.0, with the pointer tip speed increasing with
increasing value.
Keyboard
The keyboard settings can be used to configure the keyboard attached to the Samsung Thin
Client.
Loading...