Samsung 711ND User Manual

!! !!

SyncMaster 711ND

Install drivers Install programs

Notation

Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment.

Prohibited Important to read and understand at all times

Do not disassemble Disconnect the plug from the outlet

Do not touch Grounding to prevent an electric shock

Powe

When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode.

Do not use a damaged or loose plug.

This may cause an electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.

This may cause an electric shock or fire.

Use only a properly grounded plug and receptacle.

An improper ground may cause electric shock or equipment damage.

Insert the power plug firmly so that it does not come loose.

A bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.

This may cause an electric shock or fire.

Do not connect too many extension cords or plugs to an outlet.

This may cause fire.

Do not disconnect the power cord while using the monitor.

A surge may be caused by the separation and may damage the monitor.

Do not use the power cord when the connector or plug is dusty.

If the connector or plug of the power cord is dusty, clean it with a dry cloth. Using the power cord with a dusty plug or connector may cause an electric shock

or fire.

Installation

Be sure to contact an authorized Service Center when installing your set in a location

with heavy dust, high or low temperatures, high humidity, and chemical substances, or where it will be operated for 24 hours continuously such as an airport, train station or etc.

Failure to do so may cause serious damage to your set.

Put your monitor in a location with low humidity and a minimum of dust.

Failure to do so may cause an electric shock or fire inside the monitor.

Do not drop the monitor when moving it.

This may cause damage to the product or human body.

Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf.

Dropping the product may cause damage to the product or personal injury.

Do not place the product on an unstable or small surface area.

Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically children.

Do not place the product on the floor.

Someone, specifically children could trip over it.

Keep any flammable objects such as candles, insecticides or cigarettes away from the product.

Otherwise, this may cause a fire.

Keep any heating devices away from the power cable.

A melted coating may lead to electric shock or fire.

Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc.

Any increase in internal temperature may cause fire.

Set down the monitor carefully.

The monitor could be damaged or broken.

Do not place the monitor face down.

The TFT-LCD surface may be damaged.

Installing a wall bracket must be done by a qualified professional.

Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual.

Cleaning and Use

When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inch ) for ventilation purposes.

Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.

Keep the plastic packaging (bag) out of children’s reach.

The plastic packaging (bag) may cause suffocation if children play with it.

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a

slightly moistened, soft fabric.

Do not spray water or detergent directly on the monitor.

This may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth.

A dirty connector may cause an electric shock or fire.

Make sure to unplug the power cord before cleaning the product.

Otherwise, this may cause electric shock or fire.

Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth.

Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.

Contact the Service Center or Customer Center for interior cleaning once a year.

Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire.

Others

Do not remove cover (or back).

This may cause an electric shock or fire. Refer servicing to qualified service personnel.

If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized

dealer or service.

This may cause an electric shock or fire.

Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle.

This may cause malfunction, an electric shock or fire. Especially avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center.

The monitor may malfunction, causing an electric shock or fire.

Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time.

Failure to do so may cause an electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal cable.

This may cause a breakdown, electric shock or fire due to damage to the cable.

Do not move the monitor right or left by pulling only the wire or the signal cable.

This may cause a breakdown, electric shock or fire due to damage to the cable.

Do not cover the vents on the monitor cabinet.

Bad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal objects on the monitor.

This may cause malfunction, an electric shock or fire. If a foreign substance enters the monitor, unplug the power cord and contact the

Service Center.

Keep the product away from combustible chemical sprays or inflammable substances.

This may cause an explosion or fire.

Never insert anything metallic into the monitor openings.

This may cause an electric shock, fire or injury.

Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports.

It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and contact Service Center.

If you view a fixed screen for an extended period of time, residual image or blurriness may appear.

Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.

djust the resolution and frequency to the levels appropriate for the model.

Inappropriate resolution may cause undesirable picture quality.

17 inch (43 cm) - 1280 x 1024

Watching the monitor continuously at a too close angle may result in eyesight damage.

To ease eye strain, take at least a five-minute break after every hour of using the monitor.

Do not install the product on an unstable, uneven surface or a location prone to vibrations.

Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire.

When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor.

Failure to disconnect a cable may damage it and lead to fire or an electric shock.

Place the product out of children's reach, as they could damage it by hanging onto it.

A falling product could cause physical damage even death.

When not using the product for an extended time period, keep the product unplugged.

Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, leading to electric shock or fire.

Do not place children's favorite objects (or anything else that may be tempting) on the product.

Children may try to climb on the product to retrieve an object. The product could fall, causing physical damage or even death.

When you remove batteries from the remote, be careful that they are not swallowed by children. Keep batteries out of the reach of children.

If swallowed, see a doctor immediately.

When replacing batteries, place the batteries in the correct +/- polarity position as indicated on battery holder.

Incorrect polarity may cause a battery to break or leak and could lead to fire, injury, or contamination (damage).

Use only specified standard batteries. Do not use new and used batteries together.

This may cause a battery to break or leak and could lead to fire, injury, or contamination (damage).

The battery (and rechargeable battery) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable battery for recycling purposes as the consumer of the battery.

The customer can return the used or rechargeable battery to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Features

What is a network monitor?

This is a new concept monitor that accesses the PC and LAN services to display images, video clips, documents, etc. by connecting to the host PC.

It also has an additional function that remotely connects to the host PC for Internet services, independently of the host PC.

MagicNet, which is provided with the product, remotely accesses the network to adjust the time and type of the display contents on each network monitor as well as switching the power on/off remotely.

Switching off the monitor while booting up MagicNet may cause damage.

Never turn off the monitor if any application software is running.

Features

D-Sub Out port support for connecting directly with a projector or a wide screen display device.

MagicContrast : Supports a contrast of up to 700:1 for deeper color tones.

MagicSpeed : Offers a clear image with no afterimages by supporting a fast response rate of 8 ms.

MagicStand : Allows users to adjust the height of the monitor for user convenience.

Package Contents

Please make sure the following items are included with your monitor.

Unpackin

Manual

If any items are missing, contact your dealer.

Contact a local dealer to buy optional items.

Monitor

Quick Setup Guide

Cable

D-Sub Cable Power Cord LAN Cable

Others

Remote Control Batteries (AAA X 2)

Sold separatel

Warranty Card

(Not available in all

locations)

User's Guide, Monitor Driver,

Natural Color software, MagicTune™ software,

MagicRotation software,

MagicNet software

Keyboard (USB) Mouse (USB)

our Monito

Front

MENU button [ ]

MagicBright™ button []

Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.

MagicBright™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently six different modes are available : Custom, Text, Internet, Game, Sport and Movie. Each mode has its own preconfigured brightness value. You can easily select one of six settings by simply pressing MagicBright™ control button.

1) Custom Although the values are carefully chosen by our engineers, the

pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu.

2) Text For documentations or works involving heavy text.

3) Internet For working with a mixture of images such as text and graphics.

4) Game

For watching motion pictures such as a game.

5) Sport For watching motion pictures such as a sport.

6) Movie For watching motion pictures such as a DVD or Video CD.

>> Click here to see an animation clip

Brightness button [ ]

Adjust buttons [ ] Adjust items in the menu.

Enter button [ ] / SOURCE button

AUTO button Use this button for auto adjustment.

Power button [ ] Use this button for turn the monitor on and off.

Power indicator

Remote Control Sensor Aim the remote control towards this spot on the Monitor.

When OSD is not on the screen, push the button to adjust brightness.

>> Click here to see an animation clip

Activates a highlighted menu item. / Push the 'SOURCE', then selects the video signal while the OSD is off. (When the SOURCE button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- Analog or MagicNet input signal.)

>> Click here to see an animation clip

This light glows green during normal operation, and blinks green once as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

Rea

The configuration at the back of the monitor may vary from product to product.

POWER IN port

VGA IN port

VGA OUT port Connect a monitor to another monitor through a D-Sub cable.

Kensington Lock The Kensington lock is a device used to physically fix the system when

Connect the power cord for your monitor to the power port on the back of the monitor.

Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

using it in a public place.

The locking device has to be purchased separately. For using a locking device, contact where you purchase it.

Cable Fix Ring When connecting the cable is

finished, fix the cables to the Cable Fix Ring.

USB (USB Connection Terminal)

LAN (LAN Connection Terminal)

See Connecting Cables for further information regarding cable connections.

Connect USB devices such as a mouse, keyboard and external storage devices (e.g. DSC, MP3, external storage, etc.).

Connect when using it as a monitor.

Remote Control

The performance of the remote control may be affected by a TV or other electronic devices operated

near the monitor, causing malfunction due to interference with frequency.

ON / OFF

NUM, ENG

DEL

ENTER

BRIGHT buttons

PAGE Selection

MagicNet

M/B

INFO

EXIT

Up-Down Left-Right buttons

ENTER

AUTO

LOCK

MagicNet Remote Control

ON / OFF Use these buttons to turn the monitor on or off.

NUM, ENG Used to enter numbers or text in English.

SYMBOL : Used to enter symbols.

DEL Functions as the backspace.

ENTER Activates a highlighted menu item.

BRIGHT buttons When OSD is not on the screen, push the button to adjust

brightness.

PAGE Selection Used to select a page.

MagicNet MagicNet Quick Launch Button.

PC A shortcut button for analog mode.

M/B Push the MagicBright™ button to circle through available

preconfigured modes.

INFO Displays a brief explanation about the current mode.

MENU Use this button to open the on-screen menu and exit from the menu

screen or close screen adjustment menu.

EXIT Exits from the menu screen.

Up-Down Left-Right

buttons

Moves from one menu item to another horizontally, vertically or adjusts selected menu values.

ENTER Activates the selected menu item.

Stop

Play/Pause

Rewind

Fast forward

AUTO Adjusts an image in PC mode.

LOCK Used to either activate or deactivate all remote control and monitor

panel buttons other than POWER and LOCK.

)

Connecting Cables

Connect to the host PC using a LAN cable

Host PC Hub LAN Cable Monito

Connect the power cord to the power terminal at the back of the monitor. Connect the mouse and the keyboard to the USB ports. Connect the LAN port on the back of the monitor and the hub. Connect the hub and the LAN port of the host PC.

The host PC must have an IP address.

fter connecting the LAN and setting the IP address, you can view the host PC screen on the

monitor.

Use the VGA IN port to directly connect the monitor to a PC.

Connect to the VGA OUT port to display the same picture on another monitor such as the projector. (For presentation purposes)

Use the USB port to connect an external storage device (e.g. DSC, MP3, external storage, etc.).

Connecting Cables (When used as a normal monitor

Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

Using the D-sub (Analog) connector on the video card.

- Connect the D-Sub Cable to the VGA IN port on the back of your monitor.

[VGA IN]

To use the D-Sub (analog) output through another device (monitor, TV, projector, etc.)

- Connect the VGA OUT port of the monitor and the D-Sub port of another device using the D-Sub cable.

[VGA OUT]

Using Macintosh

- Connect the monitor and the Macintosh computer using the computer connection cable.

If you are using an old model Macintosh, connect the monitor and the Macintosh using a Macintosh adaptor (sold separately).

If the monitor and the computer are connected, you can turn them on and use them.

External Device Connection

USB

(USB Connection Terminal)

LAN (LAN Connection Terminal)

D-sub 15-pin port [VGA OUT]

Connect USB devices such as a mouse, keyboard and external storage devices (e.g. DSC, MP3, external storage, etc.). (You cannot use these devices without connecting to the host PC or switching to the MagicNet.)

Connect the LAN cable.

Use it by connecting it to another monitor. (The picture of the main monitor is displayed on the connected monitor.)

Using a Network Monito

MagicNet Mode

Network Used to connect to the host PC using the MagicNet program.

It can execute a file(s) registered with the host PC. And it can also locate and run any external devices connected to other network monitors.

When using MagicNet with MagicNet Server Program : execute Network mode.

Photo JPEG, BMP file format is supported. Movie AVI, MPEG1/2, DivX 4.x, DivX 5.x file format is supported. OFFICE/HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM

RDP Allows you to connect to the host PC.

Device Select to use MagicNet on the monitor.

Internet Used to connect to the Internet.

Setup Allows you to adjust the connection settings of the host PC.

Creating an RDP account (Host PC)

It can search for an external device (DSC, MP3, Removable Storage) independently of the host PC, and run image files or video clips.

Photo JPEG, BMP file format is supported. Movie AVI, MPEG1/2, DivX 4.x, DivX 5.x file format is supported. OFFICE/HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM

RDP Allows you to connect to the host PC.

Schedule View Displays the schedule. Remote Desktop Allows you to adjust the connection settings of the host PC. TCP/IP Adjusts the TCP/IP settings.

Homepage Allows you to change the default address of the Internet. Network Setup Allows you to adjust the network settings. Change

Password

Right-click on 'My Computer' on the desktop and select 'Management'.

files are displayed.

Operates regardless of the running of the MagicNet server program on the server. Connects to the host PC in either network or device mode.

files are displayed.

Operates regardless of the running of the MagicNet server program on the server. Connects to the host PC in either network or device mode.

DHCP (automatic input), STATIC (manual)

Allows you to reset your password. Administrator(when the Setup menu is selected) User(when the Network-Photo, Movie or OFFICE/HTML menu is selected)

Select the 'User' folder.

Right-click it and select 'New User'.

Enter the user name, password and properties and select 'Create'.

A new account is now created.

Right-click the new account and select 'Properties'.

Select 'Add'.

Select 'Advanced'.

Select the 'Find Now' button.

Select 'Remote Desktop User'.

Click 'OK'.

The new group is displayed in the 'Remote Desktop Users' list.

Select one of the old group and click 'Delete'.

Click 'Apply' and then 'OK'.

A new account is now created.

Other Useful Functions

You can share a program installed on the host PC with other users.

Before Usin

The host PC should be installed using Windows 2000/ 2003 Server.

Windows XP Home/Professional does not support multiple access by two users at the same time.

If the installed OS does not recognize the mouse, disconnect it and then reconnect it.

MagicNet supports the FAT format and does not support other formats including NTFS.

An error can occur when disconnecting any external device when MagicNet is booting up. Only disconnect an external device if the power is off or the PC is operating normally.

Auto rotation can only work if the monitor is directly connected to the PC. The monitor itself does not support auto rotation.

Windows 2000 Server OS Limitations

The server OS only supports a low color resolution (256 color). It does not support auto connection. You must enter the user name and the password before making a connection even if the Save Password box is checked. The host PC cannot search for any USB device connected to the monitor.

You can operate MagicNet from the remote control. However, it is recommended using a USB keyboard.

The OS of this product supports only Korean and English. Other languages may be displayed corrupted.

An error may occur when disconnecting any external device when MagicNet is booting up in Device mode. Disconnect/connect an external device only if the power is off or the product is operating normally.

Do not unplug the LAN cable when using the network (ex: video display). Otherwise the current program may stop. In this case, you should restart the PC.

Do not disconnect a USB device when it is in use (ex: video display). Otherwise the current program may stop. In this case, restart the PC.

When MagicNet is running, pressing the SOURCE button will exit to other sources.

The default monitor password is “000000".

Using the Stand

Pivot Stand

Stand Stopper

You can only rotate the screen when the screen is lifted to its maximum height. Do not rotate the screen by force, as this might damage the stand.

Using the Stand

Using Other Stands

Attaching a Base

This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.

Monitor Mounting interface pad ( Sold separately )

Turn off your monitor and unplug its power cord.

Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

Remove four screws and then remove the stand from the LCD monitor.

Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.

)

MagicNet ( Host PC

MagicNet Installation | MagicNet Help

MagicNet Installation

Insert the installation CD into the CD-ROM drive. Click the MagicNet installation file. Select installation Language, Click "Next". When the InstallShield Wizard window appears, click "Next."

Select "I agree to the terms of the license agreement" to accept the terms of use.

You are required to log in to the MagicNet Server program. Please enter the password to login. The password cannot be changed when you are logged in.

Select SyncMaster 711ND.

When selecting an Combination, install it only in the integration format of the 400Pn/460Pn and 711ND models. When selecting a single model, some functions may not work so make sure to install the appropriate programs.

+ 80 hidden pages