Samsung CL2Z43, 2Z55, 2BH0 User Manual

COLOR TELEVISION

CL21Z43/21Z45/21Z47/21Z50/ 21Z55/21Z57/21Z58/21AE0/ 21AF0/21AM0/21AJ0/21BH0

Owner’s Instructions

Rear Jack

1 2

3 Component Video Input Jacks (Y, PB, PR)

Connect to the Component video outputs of a DVD or DTV set-top box. 480i video signal input is available.

When using the Component Video input, connect audio jacks

to “AV IN 2 (AUDIO-L/R)”.

4 ANT IN

Connect to an antenna or to a cable TV system.

Front (or Side) Panel

Before operating, please read this manual thoroughly,

and retain it for future reference.

Record your Model and Serial number.

▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

The product colour and shape may vary depending on the

➢

model.

Front (or Side) Panel

1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Standby indicator 6 Power on/off

 The 2 and 3 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

Connection Panel (depending on the model)

The product color and shape may vary depending on the

➢

model.

1 2

1 5

Whenever you connect an audio or video system to your

➢

television, ensure that all elements are switched off. Please be sure to match the color coded input terminals

and cable jacks.

1 Audio/Video Output Jacks

Connect to the audio/video input jacks of a recording VCR.

2,5 Audio/Video Input Jacks

Connect to the audio/video output jacks of VCRs, DVD players and similar devices. when using the mono equipment,connect

to the AUDIO-L of 2,5 input connector

English - 1

2 3

1 Audio input 2 Video inpout 3 Headphone jack

Please be sure to match the colour coded input terminals

☛

and cable jacks.

Connecting to the RCA Input

The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

AA68-03992K-00

2 3

continued...

Connecting to the Headphones

The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing.

When both the front (or side) AV and rear connectors are

➢

connected to external equipment, the front (or side) AV

receives priority.

Remote Control (depending on the model)

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

1 POWER

Turns the TV on and off.

2 MENU

Displays the main

on-screen menu.

3 ▲/▼/◄/►

Controls the cursor in the menu.

VOL +, VOL -

Press to increase or decrease the volume.

CH , CH

Press to change channels.

4 MUTE

Press to temporarily cut off the sound.

5 Number buttons

Press to select channels directly on the TV.

6 INFO

Press to display information on the TV screen.

7 SOURCE

Press to display all of the available video sources.

8 TOOLS (depending on

the model)

You can check the following selection by pressing TOOLS button.

1. Sleep Timer

Press to select a preset time interval for automatic shut off.

2. Picture Mode Used to select the picture effect.

3. Sound Mode

Used to select sound effect.

4. MTS(Multi-channel Television Sound) Press to choose "Stereo" or "Mono".

5. Turbo Sound

Used to select the turbo sound option.

6. R. SURF

Press to automatically return to a preferred channel after a user preset time delay.

7. Sound Adjust

Used to display the sound adjust menu.

9 ENTER

While using the on-screen menus, press ENTER to activate

(or change) a particular

item.

0 EXIT

Press to exit the menu.

! PRE-CH

Tunes to the previous channel.

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the TV.

Caution: One pole switch is totally not off(one line still live)

➢

if power cord is not unplugged.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: “Input”, “Picture”, “Sound”, “Channel”,

and “Setup”.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate

normally, check that the “+” and “–” ends of

the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 2

English - 3

Setup - Plug & Play (depending on the model)

Input - Source List (depending on the model)

When the TV is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 Press the POWER button on

the remote control. The message “Start Plug

& Play” is displayed. It

flickers for a little while and

then Language menu is

Plug & Play

Start Plug & Play.

Enter Exit

automatically displayed.

2 Press the ▲ or ▼ button to

select the language, then press the ENTER button. The message “Check antenna

input” is displayed.

If any language is not

➢

selected, the language

Plug & Play

Language

English

Español Português Français

Move Enter Skip

menu will disappear about 30 seconds later.

Plug & Play

Check antenna input.

Enter Skip

3 Make sure that the antenna

is connected to the TV. Press the ENTER button,

then the “Auto Program” is

displayed.

4 Press the ENTER button to

select “Start”. The TV will

begin memorizing all of the available channels. Press the

ENTER button to stop.

Plug & Play

Auto Program

Start

Enter Skip

Plug & Play

Auto Program Air 3

Stop

Enter Skip

5 After all available channels

are stored, the “Clock set”

is displayed. Press the ENTER button. Press the

◄ or ► button to move to

the hour or minute. Set the

Plug & Play

Clock Set 12 : 00 am

Move Enter

Adjust Skip

clock by pressing the ▲ or ▼ button.

6 When you have finished,

press the MENU button.

The “Enjoy your watching.”

Enjoy your watching.

is displayed and then the channel which has been stored will be activated.

Plug & Play feature

➢

doesn’t work in the AV mode, and then the channel which has been stored will be activated.

Re-setting the Plug & Play

Method: MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play)  ENTER

Plug & Play ►

Language : English ► Time ► Caption : Off ► Child Lock ► Blue Screen : On ►

Move Enter Return

Setup

 Source List

You can switch between viewing signal from connected equipment, such

AV1 AV2 Component

as a VCR, DVD, set-top

box, and the TV source

(broadcast or cable).

Press the SOURCE

➢

button on the remote control repeatedly to select the

Move Enter Return

desired signal source.

Source List

continued...

+ 5 hidden pages